[Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

[Clean & Pack]Square Shim - Configurable - Notched Hole

Click this image to zoom it.

Move the mouse over the image to zoom

Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.

■Part Number for Clean & Pack Products

·Degreasing (Anti-rust single packing)	: Part Number SL-□□
·Precision cleaning (Degassing double packing)	: Part Number SH-□□
·Electrolytic polishing + precision cleaning (Degassing double packing)	: Part Number SHD-□□

Part Number	Cleaning Method	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Process
SL-□□	Degreasing	Anti-rust packing	Oil removal	General environment	Regular assembly process
					Post battery assembly process
SH-□□	Precision cleaning	Degassing double packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000)	Battery assembly process
					LCD-related post assembly process
					In-vehicle camera assembly process
SHD-□□	Electrolytic polishing + precision cleaning	Degassing double packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000)	Pre-semiconductor process
					Liquid crystal deposition process
					Pre-OLED process

■Notes
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.

The notched hole outer diameter can be specified in 0.1 mm increments and the hole position in 0.1 mm increments.

[Related Products]
·Click here if you would like to order Round Hole Type
·Click here for the motor base and pillow block
·Clickhere if you are looking for Standard Type

(i)Caution

See here for related information such as technical information on cleaning effects and other cleaned product lineups.
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.

Part Number

Configured Part Number is shown.

Drawing/Specifications
3D Preview
Part Numbers

One Slot	Two Slots	Three Slots

Machining Conditions of Notched Hole Type: "!" f ≥ 3 "!" a ≥ 3 "!" m ≥ 3 "!" n ≥ 3
[ ! ]Unless otherwise specified, the dimension tolerance conforms to JIS B 0405 Class m.

Type

[M]Material

[H]Hardness

[T]Thickness (T) Tolerance

Cleaning Method

One Slot

Two Slots

Three Slots

0.05

0.1

0.15

0.2

0.3

0.5

1.0

2.0

3.0

Cleaning Method

Cleaning Environment

Packaging Type

Packing Environment

SH-ASAFS

SH-ASFFS

SH-ASCFS

T = 0.05 to 1.0 SUS304H
T = 2.0·3.0 SUS304

370 to 430HV
—

±0.005

±0.02

±0.025

±0.03

±0.035

±0.04

±0.05

±0.20

±0.25

Precision cleaning

Class 1,000

Degassing double packing

Class 10

SHD-ASAFS

SHD-ASFFS

SHD-ASCFS

Electrolytic polishing + precision cleaning

[ ! ] Products are packed by order quantity. Ex. If the order is for 20 pieces, they are packed in one package (incl. 20 pieces).
[ ! ]See the details of degreasing, precision cleaning, and electrolytic polishing shown at the bottom of

the specification table.

Specification Table

Part Number

—

SH-ASAFS

—

A100

—

B25

—

T1.0

—

Q12

—

E15

—

C12

Part Number			1 mm Increments		Selection	0.1 mm Increments
Type			A	B	T	Q	E	C	P
One Hole	SH-ASAFS	SHD-ASAFS	10 to 150	10 to 150	0.05 0.1 0.15 0.2 0.3 0.5 1.0 2.0 3.0	3 to 31	Q/2+3 or more	0 〜 B- (Q/2+3)	[!]For One Hole Type, specification is not necessary

Two Holes Three Holes	SH-ASFFS SH-ASCFS	SHD-ASFFS SHD-ASCFS	16 to 200	10 to 200					Q+3 or more

Cleaning Process
·Degreasing (Part Number: SL-□□)

Working Environment: General environment
Alkaline warm pure water		After cleaning with pure water Ultrasonic pure water cleaning *3 times		Dry		Anti-rust single packing

·Precision cleaning (Part Number: SH-□□)

				Working Environment: Class 1,000				Working Environment: Class 10
Hydrocarbon cleaning Ro water cleaning		After high-pressure water jet cleaning (Ro water) Wash with pure water (10 MΩ·cm)		Use pure water (13 MΩ·cm)		Use nitrogen blow		Conducted on a clean bench in a Class 10 clean environment

·Electrolytic polishing + precision cleaning (Part Number: SHD-□□)

						Working Environment: Class 1,000				Working Environment: Class 10
Hydrocarbon cleaning Ro water cleaning		Electrolytic polishing with an electrolytic polishing layer according to the material		After high-pressure water jet cleaning (Ro water) Wash with pure water (10 MΩ·cm)		Use warm pure water (13 MΩ·cm)		Use nitrogen blow		Conducted on a clean bench in a Class 10 clean environment

Packaging Example

For degreasing:
(Part Number: SL-□□)

For precision cleaning or electrolytic polishing + precision cleaning:
(Part Number: SH-□□/SHD-□□)

[ ! ] Both the first and second layer packaging are degassed.

Cleaning Effectiveness / Recommended Environment for Use

Cleaning Method	Product Part Number	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Use Case and Process
Degreasing	SL-□□	Anti-rust packing	Oil removal	General environment	Regular assembly process
Degreasing	SL-□□	Anti-rust packing	Oil removal	General environment	Post battery assembly process
Precision cleaning	SH-□□	Degassing double packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000)	Battery assembly process
					LCD-related post assembly process
					In-vehicle camera assembly process
Electrolytic polishing + precision cleaning	SHD-□□	Degassing double packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000)	Pre-semiconductor process
					Liquid crystal deposition process
					Pre-OLED process

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 45; 60

Part Number
SH-ASAFS-A[10-150/1]-B[10-150/1]-T[0.05,0.1,0.15,0.2,0.3,0.5,1,2,3]-Q[3-31/0.1]-E[4.5-142.1/0.1]-C[0-150/0.1]
SH-ASCFS-A[16-200/1]-B[10-200/1]-T[0.05,0.1,0.15,0.2,0.3,0.5,1,2,3]-Q[3-31/0.1]-E[4.5-142.1/0.1]-C[0-194.1/0.1]-P[6-134.2/0.1]
SH-ASFFS-A[16-200/1]-B[10-200/1]-T[0.05,0.1,0.15,0.2,0.3,0.5,1,2,3]-Q[3-31/0.1]-E[4.5-142.1/0.1]-C[0-194.1/0.1]-P[6-188.2/0.1]
SHD-ASAFS-A[10-150/1]-B[10-150/1]-T[0.05,0.1,0.15,0.2,0.3,0.5,1,2,3]-Q[3-31/0.1]-E[4.5-142.1/0.1]-C[0-150/0.1]
SHD-ASCFS-A[16-200/1]-B[10-200/1]-T[0.05,0.1,0.15,0.2,0.3,0.5,1,2,3]-Q[3-31/0.1]-E[4.5-142.1/0.1]-C[0-194.1/0.1]-P[6-134.2/0.1]
SHD-ASFFS-A[16-200/1]-B[10-200/1]-T[0.05,0.1,0.15,0.2,0.3,0.5,1,2,3]-Q[3-31/0.1]-E[4.5-142.1/0.1]-C[0-194.1/0.1]-P[6-188.2/0.1]

Standard Unit Price	Minimum order quantity	Days to Ship	Cleaning Method	Number of Slotted, Round Holes	A (mm)	B (mm)	C (mm)	E (mm)	P (mm)	Q (mm)	T (mm)
-	1 Piece(s)	6 Day(s) or more	Precision Cleaning	One Slot	10 ～ 150	10 ～ 150	0 ～ 150	4.5 ～ 142.1	-	3 ～ 31	0.05 ～ 3
-	1 Piece(s)	6 Day(s) or more	Precision Cleaning	Three Slots	16 ～ 200	10 ～ 200	0 ～ 194.1	4.5 ～ 142.1	6 ～ 134.2	3 ～ 31	0.05 ～ 3
-	1 Piece(s)	6 Day(s) or more	Precision Cleaning	Two Slots	16 ～ 200	10 ～ 200	0 ～ 194.1	4.5 ～ 142.1	6 ～ 188.2	3 ～ 31	0.05 ～ 3
-	1 Piece(s)	6 Day(s) or more	Electrolytic Polishing + Precision Cleaning	One Slot	10 ～ 150	10 ～ 150	0 ～ 150	4.5 ～ 142.1	-	3 ～ 31	0.05 ～ 3
-	1 Piece(s)	6 Day(s) or more	Electrolytic Polishing + Precision Cleaning	Three Slots	16 ～ 200	10 ～ 200	0 ～ 194.1	4.5 ～ 142.1	6 ～ 134.2	3 ～ 31	0.05 ～ 3
-	1 Piece(s)	6 Day(s) or more	Electrolytic Polishing + Precision Cleaning	Two Slots	16 ～ 200	10 ～ 200	0 ～ 194.1	4.5 ～ 142.1	6 ～ 188.2	3 ～ 31	0.05 ～ 3

Basic Information

Environmentally friendly	RoHS Compliant (10 Substances)	Characteristics/Applications	Clean Washed	Rectangular Shim Type	Slotted
Material	SUS304H or SUS304

Configure

6 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Cleaning Method
- Precision Cleaning
- Electrolytic Polishing + Precision Cleaning
Clear
Number of Slotted, Round Holes
- One Slot
- Three Slots
- Two Slots
Clear
A(mm)
[10-200/1mm Unit(s)]
Clear
B(mm)
[10-200/1mm Unit(s)]
Clear
C(mm)
[0-194.1/0.1mm Unit(s)]
Clear
E(mm)
[4.5-142.1/0.1mm Unit(s)]
Clear
P(mm)
[6-188.2/0.1mm Unit(s)]
Clear
Q(mm)
[3-31/0.1mm Unit(s)]
Clear
T(mm)
0.05

0.1

0.15

0.2

0.3

0.5

1

2

3
Clear
type
- SH-ASAFS
- SH-ASCFS
- SH-ASFFS
- SHD-ASAFS
- SHD-ASCFS
- SHD-ASFFS
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

6 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Additional Products in this Category

Tech Support

: Technical Inquiry

How can we improve?

[Clean & Pack]Square Shim - Configurable - Notched Hole

(i)Caution

Specification Table

Part Number

Basic Information

Configure

Specification/Dimensions

Cleaning Method

Number of Slotted, Round Holes

A(mm)

B(mm)

C(mm)

E(mm)

P(mm)

Q(mm)

T(mm)

type

CAD

Days to Ship

Specify Alterations

Additional Products in this Category

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm