[Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

[Clean & Pack]Sprockets 40B (SH-SSP40B14-S-12)

Click this image to zoom it.

Move the mouse over the image to zoom

Volume Discount

Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.

■Part Number for Clean & Pack Products

· Degreasing (Anti-rust single packing)	: Part Number SL-□□
· Precision cleaning (Degassing double packing)	: Part Number SH-□□
· Electrolytic polishing + precision cleaning (Degassing double packing)	: Part Number SHD-□□

Product Part Number	Cleaning Method	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Process
SL-□□	Degreasing	Anti-rust packing	Oil removal	General environment	Regular assembly process
					Post battery assembly process
SH-□□	Precision cleaning	Degassing double packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000)	Battery assembly process
					LCD-related post assembly process
					In-vehicle camera assembly process
SHD-□□	Electrolytic polishing + precision cleaning	Degassing double packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000)	Pre-semiconductor process
					Liquid crystal deposition process
					Pre-OLED process

■Notes
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.

In addition to the shaft bore machined type, products with roughly machined shaft bores (S specifications) that can be altered freely are also available.

(i)Caution

See here for related information such as technical information on cleaning effects and other cleaned product lineups.
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.
Please check the content on our website as the PDF does not contain the most up-to-date information.
From August 2023, the set screw size for shaft bore diameter (D): 10K will be changed from M5 to M4.

Part Number

Configured Part Number is shown.

SH-SSP40B14-S-12

Drawing/Specifications
3D Preview
Part Numbers

		Shaft Bore Spec. S	Shaft Bore Spec. N
		(Rough Machining)	(New JIS Key + Tap)

[ ! ] Offset between tooth tip and keyway is ±0.5 mm

Type	[M] Material	Cleaning Method
		Cleaning Method	Cleaning Environment	Packaging Type	Packing Environment
SH-SSP40B	SUS304 equivalent	Precision cleaning	Class 1,000	Degassing double packing	Class 10
SHD-SSP40B		Electrolytic polishing + precision cleaning

[ ! ] Products are packed by order quantity. Ex. If the order is for 20 pieces, they are packed in one package (incl. 20 pieces).
[ ! ] See the details of degreasing, precision cleaning, and electrolytic polishing shown at the bottom of the

specification table.
[A]Accessories: Two set screws are included. (Only for shaft bore specification [N])
* The S-type shaft bore dia. values are for reference only and actual values may be smaller by 1 mm. (provided with a pilot hole)
* Machine key not included. Please purchase separately if necessary.

Specification Table

Part Number	—	Shaft Bore Specs.	—	Shaft Bore Dia.
SH-SSP40B17	—	N	—	15
SH-SSP40B20	—	N	—	18

Part Number				Shaft Bore Specification	Shaft Bore Dia. (D)												Dp	Do	H	GD	L	ℓ	X	Z	Mass (g)
Type			Number of Teeth		S Specification	N Specification (H7)
	Nominal	Hub Type
	Nominal	Hub Type
SH-SSP SHD-SSP	40	B	10	S N	9	12*	15*	16									41.1	46	32	27	22	5	7.2	5.2	140
			11		10		15	16	18		20*						45.08	51	36	31					190
			12		10		15*	16*	18		20*						49.07	55	40	35					220
			13		12		15*	16	18		20*						53.07	59	37	—		6		—	230
			14		12		15*	16	18*	19	20*	22	24	25			57.07	63	42						280
			15		12		15*	16	18	19	20*	22	24	25*	28		61.08	67	46						340
			16		13		15*	16	18	19	20*	22	24	25*	28	30	65.1	71	50						400
			17		13		15	16	18	19	20*	22	24	25	28	30	69.12	76	54						460
			18		13		15	16	18	19	20	22	24	25	28	30	73.14	80	57						510
			19		14		15*	16	18	19	20	22	24	25*	28	30	77.16	84	62						590
			20		14		15	16	18	19	20*	22	24	25	28	30	81.18	88	67		25	7			760
			21		14				18		20	22	24	25	28	30	85.21	92	71						850
			22		14				18		20	22	24	25	28	30	89.24	96	75						950
			23		14				18		20	22	24	25	28	30	93.27	100	77						1000
			24		14				18		20	22	24	25	28	30	97.3	104	63						840
			25		14				18		20	22	24	25	28	30	101.33	108							880
			26		14						20	22		25		30	105.36	112							920
			28		14						20	22		25		30	113.43	120							1000
			30		14						20	22		25*		30*	121.5	128							1100
			32		14						20	22		25		30	129.57	137	68		28	10			1300
			35		14						20	22		25		30	141.68	149							1400
			36		16						20	22		25		30	145.72	153							1500
			40		16									25*		30*	161.87	169							1700

■Shaft Bore Specifications

Shaft Bore Dia. D	Keyway b₂ × t₂	Set screws
Shaft Bore Dia. D	Keyway b₂ × t₂	M (Coarse)	Pitch
10	3 × 1.4	4	0.7
10K·12	4 × 1.8	5	0.8
14 to 17	5 × 2.3	6	1.0
18 to 22	6 × 2.8	6	1.0
24 to 30	8 × 3.3	8	1.25
32 to 38	10 × 3.3	8	1.25
40·42	12 × 3.3	8	1.25
45·50	14 × 3.8	10	1.5

[ ! ] The following products have a different set screw size.

Applicable specifications	Set Screw
Applicable specifications	M (Coarse)	Pitch
Nominal: 35, Number of teeth: 17, Shaft diameter: 25	6	1.0
Nominal: 40, Number of teeth: 14, Shaft diameter: 25	6	1.0
Nominal: 40, Number of teeth: 15, Shaft diameter: 30	6	1.0
Nominal: 50, Number of teeth: 11 to 13, Shaft diameter: 24 or more	6	1.0

Cleaning Process
· Degreasing (Part Number: SL-□□)

Working Environment: General environment
Alkaline warm pure water		Ultrasonic pure water cleaning after cleaning with pure water *3 times		Dry		Anti-rust single packing

· Precision cleaning (Part Number: SH-□□)

				Working Environment: Class 1,000				Working Environment: Class 10
Hydrocarbon cleaningRo water cleaning		Wash with pure water (10 MΩ·cm) after high-pressure water jet cleaning (Ro water)		Use pure water (13 MΩ·cm)		Use nitrogen blow		Conducted on a clean benchin a Class 10 clean environment

· Electrolytic polishing + precision cleaning (Part Number: SHD-□□)

						Working Environment: Class 1,000				Working Environment: Class 10
Hydrocarbon cleaning Ro water cleaning		Electrolytic polishing with an electrolytic polishing layeraccording to the material		Wash with pure water (10 MΩ·cm) after high-pressure water jet cleaning (Ro water)		Use warm pure water (13 MΩ·cm)		Use nitrogen blow		Conducted on a clean benchin a Class 10 clean environment

Packaging Example

For degreasing:
(Part Number: SL-□□)

For precision cleaning or electrolytic polishing + precision cleaning:
(Part Number: SH-□□/SHD-□□)

[ ! ] Both the first and second layer packaging are degassed.

Cleaning Effectiveness / Recommended Environment for Use

Cleaning Method	Product Part Number	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Use Case and Process
Degreasing	SL-□□	Anti-rust packing	Oil removal	General environment	Regular assembly process
Degreasing	SL-□□	Anti-rust packing	Oil removal	General environment	Post battery assembly process
Precision cleaning	SH-□□	Degassing double packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000)	Battery assembly process
					LCD-related post assembly process
					In-vehicle camera assembly process
Electrolytic polishing + precision cleaning	SHD-□□	Degassing double packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000)	Pre-semiconductor process
					Liquid crystal deposition process
					Pre-OLED process

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 45; 60

Part Number
SH-SSP40B14-S-12

Part Number	Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	Number of Teeth (T)	Shaft Bore Dia. D (or d) (mm)	Type	Shaft Type	Cleaning Method	Bore Specification
	MYR 121.15	1 Piece(s)	Available	6 Day(s) or more	14	-	Pilot Bore Type	Standard Pilot Bore	Precision Cleaning	S (pilot bore)

Basic Information

Sprocket Shape	Shape B	Nominal	40	Number of Strands	Single Strand
Material	S45C Equivalent (Induction Hardened Teeth Tip)	Chain Type	Others	Surface Treatment	Not Provided
Characteristics/Applications	Clean washed	Environmentally friendly	RoHS Compliant (10 Substances)

Please check the type/dimensions/specifications of the part SH-SSP40B14-S-12 in the [Clean & Pack]Sprockets 40B series.

Configure

1 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Shaft Bore Dia. D (or d)(mm)
12

15

16

18

19

20

22

24

25

28

30
Clear
type
- SH-SSP40B
- SHD-SSP40B
Clear
Number of Teeth(T)
10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

28

30

32

35

36

40
Clear
Type
- Pilot Bore Type
- Shaft Bore Machined Type
Clear
Shaft Type
- Standard Pilot Bore
- Shaft Bore Machining Configurable
Clear
Cleaning Method
- Precision Cleaning
- Electrolytic Polishing + Precision Cleaning
Clear
Bore Specification
- N (New JIS Key + Tap)
- S (pilot bore)
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

6 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Products like this...

Part Number
SH-SSP40B11-S-10
SH-SSP40B12-S-10
SH-SSP40B13-S-12
SH-SSP40B15-S-12
SH-SSP40B16-S-13
SH-SSP40B17-S-13

Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	Number of Teeth (T)	Shaft Bore Dia. D (or d) (mm)	Type	Shaft Type	Cleaning Method	Bore Specification
MYR 119.62	1 Piece(s)	Available	6 Day(s) or more	11	-	Pilot Bore Type	Standard Pilot Bore	Precision Cleaning	S (pilot bore)
MYR 120.38	1 Piece(s)	Available	6 Day(s) or more	12	-	Pilot Bore Type	Standard Pilot Bore	Precision Cleaning	S (pilot bore)
MYR 120.77	1 Piece(s)	Available	6 Day(s) or more	13	-	Pilot Bore Type	Standard Pilot Bore	Precision Cleaning	S (pilot bore)
MYR 121.92	1 Piece(s)	Available	6 Day(s) or more	15	-	Pilot Bore Type	Standard Pilot Bore	Precision Cleaning	S (pilot bore)
MYR 125.77	1 Piece(s)	Available	6 Day(s) or more	16	-	Pilot Bore Type	Standard Pilot Bore	Precision Cleaning	S (pilot bore)
MYR 129.62	1 Piece(s)	Available	6 Day(s) or more	17	-	Pilot Bore Type	Standard Pilot Bore	Precision Cleaning	S (pilot bore)

Additional Products in this Category

Tech Support

: Technical Inquiry

How can we improve?

[Clean & Pack]Sprockets 40B (SH-SSP40B14-S-12)

(i)Caution

Specification Table

Part Number

Basic Information

Configure

Specification/Dimensions

Shaft Bore Dia. D (or d)(mm)

type

Number of Teeth(T)

Type

Shaft Type

Cleaning Method

Bore Specification

CAD

Days to Ship

Specify Alterations

Products like this...

Additional Products in this Category

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm