(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Double Disc Couplings Set Screw Type (Part Numbers)
MiSUMi Economy
This is an economy item, The price is cheaper than the MISUMI standard product.
- RoHS
Part Number
Configured Part Number is shown.
Product Overview of Flexible Shaft Couplings
Flexible Shaft Couplings is made of several sets of discs (stainless steel sheet) bolted staggered with two coupling halves, each set of discs by several pieces of stacked set.
The Flexible Shaft Couplings relies on the elastic deformation of the disc to compensate for the relative displacement of the two shafts connected, is a high-performance flexible coupling with strong metal components.
It is characterized by compact structure, zero backlash, high strength, long service life, no rotating clearance, unaffected by temperature and oil, acid and alkali resistant and corrosion resistant.
Applicable motor types: Recommended for servo motors, stepper motors and general motors.
The Flexible Shaft Couplings relies on the elastic deformation of the disc to compensate for the relative displacement of the two shafts connected, is a high-performance flexible coupling with strong metal components.
It is characterized by compact structure, zero backlash, high strength, long service life, no rotating clearance, unaffected by temperature and oil, acid and alkali resistant and corrosion resistant.
Applicable motor types: Recommended for servo motors, stepper motors and general motors.
Dimensional Drawing of Flexible Shaft Couplings
Set Screw Type
Material table
Material table
| Type | Part |  Material |  Surface Treatment |  Accessory |
| E-LMCPSW | Hub | Aluminum Alloy | Clear Anodize | Set Screw |
| Screw | Stainless Steel | - |
Specification Table of Flexible Shaft Couplings
Flexible Shaft Couplings, Please follow the selection steps
～
to select the part no. Please specify the shaft hole diameterwithin the range of d1≤d2.
～
to select the part no. Please specify the shaft hole diameterwithin the range of d1≤d2.Part No.(Type· D) | - |  d1 | - | d2 |
| E-LMCPSW26 | - | 5 | - | 10 |
| E-LMCPSW39 | - | 11 | - | 18 |
| Part No. | d1、d2 Shaft Hole Dia.(d1≤d2) | L | ||||||||||||||||||||
| Type | D | |||||||||||||||||||||
| E-LMCPSW | 19 | ＊3 | ＊4 | ＊5 | 6 | 6.35 | 7 | 8 | 27 | |||||||||||||
| 26 | ＊5 | 6 | 6.35 | 7 | 8 | 9 | 9.525 | 10 | 11 | 12 | 14 | 35 | ||||||||||
| 32 | ＊5 | 6 | 6.35 | 8 | 9 | 9.525 | 10 | 11 | 12 | 12.7 | 14 | 15 | 41 | |||||||||
| 34 | ＊5 | 6 | 6.35 | 8 | 9 | 9.525 | 10 | 11 | 12 | 12.7 | 14 | 15 | 16 | 45 | ||||||||
| 39 | 8 | 9 | 9.525 | 10 | 11 | 12 | 12.7 | 14 | 15 | 16 | 17 | 18 | 50 | |||||||||
| 44 | 8 | 9 | 9.525 | 10 | 11 | 12 | 12.7 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 50 | |||||||
d1, d2* size products without keyway holes.
| Part No. | L | F | Set Screw | Rated Torque (N·m) | Allowable Axial Misalignment (m·m) | Static Torsional Spring Constant (N·m/rad) | Maximum Rotational Speed (r/min) | Compensation Coefficient | Mass (g) | ||
| Type | D | M | Tightening torque N.m | ||||||||
| E-LMCPSW | 19 | 27 | 4.4 | M2.5 | 1.2 | 1 | 0.12 | 700 | 10000 | 1 | 19 |
| 26 | 35 | 5.7 | M4 | 1.7 | 1.5 | 0.15 | 1850 | 10000 | 1 | 29 | |
| 32 | 41 | 6.1 | M4 | 1.7 | 2 | 0.17 | 2850 | 10000 | 1 | 60 | |
| 34 | 45 | 7.1 | M4 | 1.7 | 3 | 0.17 | 4050 | 10000 | 1 | 69 | |
| 39 | 50 | 7.5 | M5 | 4 | 6 | 0.22 | 9000 | 10000 | 1 | 101 | |
| 44 | 50 | 7.5 | M5 | 4 | 9 | 0.22 | 10000 | 10000 | 1 | 190 | |
Alterations of Flexible Shaft Couplings
| Shaft Hole Dia d1 · d2 | b(Keyway Width) | t Keyway Depth | Keyway Nominal Dim. b X h | |
| LK | RK | |||
| 6 ~ 7.9 | 2 | 2 | 1 | 2x2 |
| 8～10 | 3 | 3 | 1.4 | 3x3 |
| 11～12 | 4 | 4 | 1.8 | 4x4 |
| 13～17 | 5 | 5 | 2.3 | 5x5 |
| 18～22 | 6 | 6 | 2.8 | 6x6 |
Product Features of Flexible Shaft Couplings
■Main characteristics of Flexible Shaft Couplings
1. Strong capability to compensate for misalignment of two shafts, offering twice the angular displacement compared to Jaw couplings, lower reactionary forces during radial displacement, high flexibility, and allows for certain axial,radial, and angular displacements.
2. Provides significant vibration damping effects, operates without noise, and wear-free.
3. Can safely operate under conditions of shock and vibration.
4. High transmission efficiency, up to 99.86%, particularly suitable for medium and high-speed, high-power transmission.
5. Simple structure, lightweight, small volume, and convenient for assembly and disassembly. Installation and removal can be done without moving the machine (refers to the type with an intermediate shaft) and does not require lubrication.
6. Can accurately transmit rotational speed, operates without slip, suitable for the transmission of precision machinery.
1. Strong capability to compensate for misalignment of two shafts, offering twice the angular displacement compared to Jaw couplings, lower reactionary forces during radial displacement, high flexibility, and allows for certain axial,radial, and angular displacements.
2. Provides significant vibration damping effects, operates without noise, and wear-free.
3. Can safely operate under conditions of shock and vibration.
4. High transmission efficiency, up to 99.86%, particularly suitable for medium and high-speed, high-power transmission.
5. Simple structure, lightweight, small volume, and convenient for assembly and disassembly. Installation and removal can be done without moving the machine (refers to the type with an intermediate shaft) and does not require lubrication.
6. Can accurately transmit rotational speed, operates without slip, suitable for the transmission of precision machinery.
Example Use of Flexible Shaft Couplings
Precautions of Flexible Shaft Couplings
■Calibration adjustment of Flexible Shaft Couplings
1. The coupling allows shaft center deviation and transmits rotation angle and torque. However, when the shaft center deviation exceeds the allowable value, vibration will occur or the service life will be drastically reduced.
2. Axis deviation includes eccentricity (parallel error of two axes), declination (angular error of two axes), and axial amplitude (axial movement of the shaft).
Please calibrate and adjust the shaft to ensure that the axis center deviation is below the allowable value stated in the dimensions and performance table of each product.
3. The allowable value of axial misalignment stated in the dimensions and performance table refers to the situation when one of eccentricity, declination, or axial amplitude occurs alone.
When more than two axis deviations occur at the same time, the corresponding allowable values will be halved respectively.
4. Axial misalignment not only occurs when assembling to the device, but also occurs due to vibration, thermal expansion, bearing wear, etc. during operation. Therefore, it is recommended to set the axis deviation to less than 1/3 of theallowable value.
1. The coupling allows shaft center deviation and transmits rotation angle and torque. However, when the shaft center deviation exceeds the allowable value, vibration will occur or the service life will be drastically reduced.
2. Axis deviation includes eccentricity (parallel error of two axes), declination (angular error of two axes), and axial amplitude (axial movement of the shaft).
Please calibrate and adjust the shaft to ensure that the axis center deviation is below the allowable value stated in the dimensions and performance table of each product.
3. The allowable value of axial misalignment stated in the dimensions and performance table refers to the situation when one of eccentricity, declination, or axial amplitude occurs alone.
When more than two axis deviations occur at the same time, the corresponding allowable values will be halved respectively.
4. Axial misalignment not only occurs when assembling to the device, but also occurs due to vibration, thermal expansion, bearing wear, etc. during operation. Therefore, it is recommended to set the axis deviation to less than 1/3 of theallowable value.
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| E-LMCPSW26-[5,6,6.35,7,8,9,9.525,10,11,12,14]-[5,6,6.35,7,8,9,9.525,10,11,12,14] |
| E-LMCPSW32-[5,6,6.35,8,9,9.525,10,11,12,12.7,14,15]-[5,6,6.35,8,9,9.525,10,11,12,12.7,14,15] |
| E-LMCPSW34-[5,6,6.35,8,9,9.525,10,11,12,12.7,14,15,16]-[5,6,6.35,8,9,9.525,10,11,12,12.7,14,15,16] |
| E-LMCPSW39-[8,9,9.525,10,11,12,12.7,14,15,16,17,18]-[8,9,9.525,10,11,12,12.7,14,15,16,17,18] |
| E-LMCPSW44-[8,9,9.525,10,11,12,12.7,14,15,16,17,18,19,20]-[8,9,9.525,10,11,12,12.7,14,15,16,17,18,19,20] |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Shaft Bore Dia.1 d1 (or d) (Ø) | Shaft Bore Dia. 2 d2 (or d) (Ø) | O.D. (Ø) | Overall Length (mm) | Allowable Torque (N•m) | Allowable Lateral Misalignment (mm) | Allowable Axial Misalignment (mm) | Moment of Inertia (kg・m2) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | 10 Day(s) | 5 ～ 14 | 5 ～ 14 | 26 | 35 | 1.5 | 0.15 | ±0.30 | 2.8×10-6 | ||
- | 1 Piece(s) | 10 Day(s) | 5 ～ 15 | 5 ～ 15 | 32 | 41 | 2 | 0.17 | ±0.36 | 7.6×10-6 | ||
- | 1 Piece(s) | 10 Day(s) | 5 ～ 16 | 5 ～ 16 | 34 | 45 | 3 | 0.17 | ±0.36 | 9.0×10-6 | ||
- | 1 Piece(s) | 10 Day(s) | 8 ～ 18 | 8 ～ 18 | 39 | 50 | 6 | 0.22 | ±0.45 | 2.7×10-5 | ||
- | 1 Piece(s) | 10 Day(s) | 8 ～ 20 | 8 ～ 20 | 44 | 50 | 9 | 0.22 | ±0.54 | 4.2×10-5 |
Loading...
Basic Information
| Series Name | Disc | Application | For Servo Motors / Stepping Motor | Features | High Torsional Rigidity / High Torque Type |
|---|---|---|---|---|---|
| Allowable Misalignment | Angular Misalignment / Eccentricity / Axial Misalignment | Body Material | Aluminum Alloy | Allowable Angular Misalignment(deg) | 1.5 |
| Product Category | Coupling Main Body | Max. Rotational Speed(r/min) | 10000 | Disc Material | Stainless Steel |
| Single/Double | Double Disc | Shaft Tightening Method | Set Screw | Single/Double | 双膜片 |
| Shaft Hole Shape | Standard | Shaft Tightening Method | 止动螺丝 |
Specification/Dimensions
-
Shaft Bore Dia.1 d1 (or d)(Ø)
-
Shaft Bore Dia. 2 d2 (or d)(Ø)
-
O.D.(Ø)
-
Overall Length(mm)
-
Allowable Torque(N•m)
-
Allowable Lateral Misalignment(mm)
-
type
- E-LMCPSW
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 10 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Frequently asked question (FAQ)
- Question: What is a coupling?
- Answer: A coupling is a part that connects two different rotating bodies (motor shaft, ball screw, etc.) and aims at transmitting torque. The load of assembly adjustment is reduced by absorbing the axis deviation (lateral misalignment, angular misalignment and axial amplitude) between rotating bodies. And in case of accidental overload, the coupling is destroyed and the rotating bodies are disconnected to protect the expensive power part and the whole device.
- Question: Which disc type coupling is better, single disc type or double disc type?
-
Answer:
Double disc type can absorb angular misalignment and lateral misalignment, but the total length will increase.
Although the total length of the single disc type is short, it is only suitable for applications with narrow space because lateral misalignment is not allowed in the structure.
Special attention should be paid to centering during use. - Question: Abnormal sound or vibration occurs during use of disc type coupling.
-
Answer:
When a servo motor is used, the frequency of the mechanical resonance suppression filter is set as its inherent vibration frequency in the control system to suppress sound and vibration.
When using a stepping motor, the rotational speed can be finely adjusted, or the vibration can be absorbed and suppressed by the high damping rubber type coupling with obvious attenuation effect. - Question: How to achieve the effect of applicable lateral misalignment and angular misalignment in product design?
- Answer: The plate spring formed by the slit allows lateral misalignment, angular misalignment and end play.
- Question: What does the product need for applications of lateral misalignment and angular misalignment?
- Answer: Lateral misalignment, angular misalignment and axial amplitude are all single allowable values. If there are multiple deviations at the same time, the allowable value of each deviation will be reduced to 1/2 of the original value.
Additional Products in this Category
- Disc Couplings - Clamping
- Oldham Couplings - Clamping
- Oldham Couplings - High Rigidity Large Shaft Diameter, Set Screw / Clamping
- Jaw & Spider Couplings - Set Screw
- Servo Flex SFC
- Bellows coupling series NB type phosphor bronze product
- Helical Type Slit Coupling - Set Screw Type - SABP/SSBP
- Disc Coupling Set Screw Type (Double Disc) SHDW
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy