(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Rolled Ball Screws - Shaft Dia. 6; Lead 1 / 2 / 6 / 10 - Accuracy Grade C7
Part Number
Configured Part Number is shown.
Product Overview of Ball Screw
1. This series of products is the C7 Rolled Ball Screw with the shaft diameter of 6 and lead of 1/2/6/10.2. It is more suitable for feeding mechanisms in FA automation equipment.
3. The Ball Screw end is machined according to standard specifications. If the shaft end requires alteration, it should be specified according to the catalog.
Dimensional Drawing of Ball Screw
| Accuracy grade | Ball Screw Dia. | Lead | Ball Screw | Nut | ||||
 Material of Ball Screw |  Hardness |  Surface Treatment | Material of Ball Screw | Hardness | Surface Treatment | |||
| C7 | 6 | 1·2·6·10 | S55C equivalent | Induction hardening 58～62HRC | － | SCM415H equivalent | Carburized 58～62HRC | － |
Specification Table of Ball Screw
| Part Number of Ball Screw |  L(1mm increments) | Y | Number of Circuits | Basic Load Rating | Axial Play | Twisting Direction | |||
 Type of Ball Screw |  Ball Screw O.D. |  Lead | C (Dynamic) kN | C (Static) kN | |||||
| E-TBS | 06 | 01 | 60~170 | L-25 | 3 turns | 0.56 | 0.95 | 0.02 or Less | Right |
| 02 | 3 turns | 0.75 | 1.2 | ||||||
| 06 | 3.2 turns | 0.87 | 1.45 | ||||||
| 10 | 2.4 turns | 0.95 | 1.6 | ||||||
Alterations of Ball Screw
| Part Number (Type·Ball Screw O.D.·Lead) | － | L | － | (RLC·SZC…etc.) | ||
| E-TBS0601 | － | 80 | － | RLC |
■Support side of Ball Screw
When ⑤ and ⑥ are specified simultaneously, no male thread will be machined regardless of the value specified for U in ⑤.
When specifying any alteration, the nut motion range (Y dimension) may become shorter. Please make sure that the Ball Screw motion range is greater than the full length ofthe Ball Screw.
| Alterations | Code | Spec. | ||||||||
①Ball Screw Orientation Reversed | RLC | Changes the Ball Screw direction. Ordering CodeRLC | ||||||||
②Machining on Support Side Shaft End | TFC | Machining added on the support Ball Screw end. Ordering Code TFC
|
When ⑤ and ⑥ are specified simultaneously, no male thread will be machined regardless of the value specified for U in ⑤.When specifying any alteration, the nut motion range (Y dimension) may become shorter. Please make sure that the Ball Screw motion range is greater than the full length ofthe Ball Screw.■Fixed side of Ball Screw
| Alterations of Ball Screw | Code of Ball Screw | Spec of Ball Screw. |
③Wrench Flats on Ball Screw Incomplete Hardened Area | SZC | Adds wrench flats on the fixed Ball Screw end. Ordering CodeSZC Ball bearings will fall out if the Ball Screw crosses the wrench flats.The Ball Screw may not be moved within the Incomplete Hardened Area. Note that when selecting. |
④No machining of small steps on the Ball Screw | NF | No machining of small steps on the Ball Screw Ordering CodeNF |
⑤Change dimensions of big steps on the Ball Screw | CU | Change dimensions of big steps on the Ball Screw 7≤C≤22 4≤U≤C－3 C, U＝1mm increments Ordering CodeCU-C15-U10 |
⑥No machining of big steps male thread on the Ball Screw | NU | No machining of big steps male thread on the Ball Screw Ordering CodeNU |
Ball Screw Runout Tolerance
| Type | Ball Screw Shaft O.D. | Runout tolerance G (Max.) | Incomplete Hardened Area (ℓ) | ||||||||||
| ~125 | 126~200 | 201~315 | 316~400 | 401~500 | 501~630 | 631~800 | 801~1000 | 1001~1250 | 1251~1600 | 1601~2000 | |||
| E-TBS | 4 | 0.060 | 0.075 | - | - | - | - | - | - | - | - | - | 5 |
| 6 | 0.075 | 0.075 | - | - | - | - | - | - | - | - | - | ||
| C-TBSE C-TBSB | 8 | 0.100 | 0.140 | 0.210 | 0.270 | - | - | - | - | - | - | - | 10 |
| 10 | - | 0.120 | 0.160 | 0.210 | 0.270 | 0.350 | - | - | - | - | - | ||
| 12 | - | 0.120 | 0.160 | 0.210 | 0.270 | 0.350 | 0.480 | - | - | - | - | ||
| 15 | - | 0.110 | 0.130 | 0.160 | 0.200 | 0.250 | 0.320 | 0.420 | 0.550 | - | - | ||
| 20 | - | 0.110 | 0.130 | 0.160 | 0.200 | 0.250 | 0.320 | 0.420 | 0.550 | 0.730 | 0.730 | 15 | |
| 25 | - | 0.110 | 0.110 | 0.130 | 0.160 | 0.190 | 0.230 | 0.300 | 0.380 | 0.500 | 0.690 | ||
| 32 | - | - | 0.110 | 0.130 | 0.160 | 0.190 | 0.230 | 0.300 | 0.380 | 0.500 | 0.690 | 20 | |
| E-KBS | 4 | 0.050 | - | - | - | - | - | - | - | - | - | - | 5 |
| 6 | 0.050 | 0.050 | - | - | - | - | - | - | - | - | - | ||
| C-KBS | 8 | 0.060 | 0.075 | 0.100 | - | - | - | - | - | - | - | - | |
| 10 | 0.055 | 0.065 | 0.080 | 0.100 | - | - | - | - | - | - | - | ||
| 12 | - | 0.065 | 0.080 | 0.100 | 0.120 | - | - | - | - | - | - | 10 | |
| 15 | - | 0.060 | 0.070 | 0.080 | 0.095 | 0.110 | 0.140 | 0.170 | 0.210 | - | - | ||
| 20 | - | 0.060 | 0.070 | 0.080 | 0.095 | 0.110 | 0.140 | 0.170 | 0.210 | 0.270 | - | 15 | |
| 25 | - | - | 0.060 | 0.070 | 0.080 | 0.090 | 0.100 | 0.130 | 0.170 | 0.210 | - | ||
| E-KLR | 4 | 0.050 | 0.050 | - | - | - | - | - | - | - | - | - | 5 |
| 8 | 0.065 | 0.075 | 0.100 | - | - | - | - | - | - | - | - | ||
| 10 | 0.065 | 0.065 | 0.080 | 0.100 | - | - | - | - | - | - | - | ||
Ball Screw Runing Noise Level
Ball screw noise level is affected by several important factors:
The figures below show the noise levels of ball screws with different specifications.
Note:
- These test results are for reference only and do not represent all ball screw specifications.
- Actual noise levels may vary depending on multiple factors.
Misumi C7 grade ball screws have controlled outgoing noise levels and guarantee less than 70 dB at a rotational speed of 1500 RPM.
(Noise measured at a distance of 1 meter from the ball screw)
Product Features of Ball Screw
1. Drawing-based machining is no longer required, saving the time for drawing.2. The total length of Ball Screw can be specified in 1 mm increments. With abundant shaft end specifications, it is possible to specify alterations for different applications.
Example Use of Ball Screw
Precautions of Ball Screw
■ Precautions for Selection and Use
● The noise value of the Ball Screw after assembly is not guaranteed.
● Although lithium soap-based grease has been applied at the factory, it is required to apply new grease every 2~3 months as standard after receiving the goods, otherwise the normal use will be affected.
●In operation, if there is too much noise or sharp and harsh sound, please make sure that the installation accuracy of the Ball Screw and the specifications of peripheral components such as motors and couplings are appropriate.
●Do not let the nut exceed the movement range of the ball screw nut, or screw out of the screw shaft, otherwise the ball will fall off and the ball cycling parts will be damaged.
● Ball Screw and nuts placed with an inclination may fall due to weight. Please be careful.
● This product is a machined type, so there will be knife patterns and color difference in its appearance. Small scratches or color changes without affecting the use and main function are of a normal phenomenon. Please feel free touse.
● The noise value of the Ball Screw after assembly is not guaranteed.
● Although lithium soap-based grease has been applied at the factory, it is required to apply new grease every 2~3 months as standard after receiving the goods, otherwise the normal use will be affected.
●In operation, if there is too much noise or sharp and harsh sound, please make sure that the installation accuracy of the Ball Screw and the specifications of peripheral components such as motors and couplings are appropriate.
●Do not let the nut exceed the movement range of the ball screw nut, or screw out of the screw shaft, otherwise the ball will fall off and the ball cycling parts will be damaged.
● Ball Screw and nuts placed with an inclination may fall due to weight. Please be careful.
● This product is a machined type, so there will be knife patterns and color difference in its appearance. Small scratches or color changes without affecting the use and main function are of a normal phenomenon. Please feel free touse.
·Removal of nut is prohibited | ·No impact on the Ball Screw | ·Be careful of falling due to weight |
·Checking for reverse action | ·Pay attention to intrusion of foreign objects | ·Ball Screw overstroke is prohibited |
■ Precautions of the ball screw and peripheral parts design and assembly
The Ball Screw is a component that only bears axial load. If it is subjected to radial load or moment load, poor sliding, vibration or abnormal noise may occur, shortening its service life.
The reason that the Ball Screw bears radial load and moment load is the axis deviation and parallelism error of the surrounding parts. Therefore, it is necessary to correctly design and assemble the peripheral parts of the ball screwto prevent errors.
● Axis deviation of Ball Screw and support unit (Fig. 1)
- Axis deviation is the deviation of the Ball Screw fixed by the fixed side support unit and the bearing of the supporting side support unit.
-The allowable value of the axis deviation is 20μ or less (reference value)
●Parallelism between Ball Screw and linear guide (Diagram 2)
- Parallelism error refers to the inclination of the Ball Screw in the up-down or left-right direction with respect to the reference of the linear guide.
-The allowable value of inclination is below 1/2000 (Diagram 3)
●Precautions of assembly
If you notice abnormal noises during the operation of the Ball Screw or jamming during movement after assembly, please loosen the connections of the parts before proceeding. Adjust and reassemble after moving smoothly.
- Error in the left and right direction of the support unit (Fig. 1)
- Parallel error of linear guide and ball screw (Fig. 2)
- Fixing of workbench and nut bracket
- Fixing of ball screw nut and nut bracket
The Ball Screw is a component that only bears axial load. If it is subjected to radial load or moment load, poor sliding, vibration or abnormal noise may occur, shortening its service life.
The reason that the Ball Screw bears radial load and moment load is the axis deviation and parallelism error of the surrounding parts. Therefore, it is necessary to correctly design and assemble the peripheral parts of the ball screwto prevent errors.
● Axis deviation of Ball Screw and support unit (Fig. 1)
- Axis deviation is the deviation of the Ball Screw fixed by the fixed side support unit and the bearing of the supporting side support unit.
-The allowable value of the axis deviation is 20μ or less (reference value)
●Parallelism between Ball Screw and linear guide (Diagram 2)
- Parallelism error refers to the inclination of the Ball Screw in the up-down or left-right direction with respect to the reference of the linear guide.
-The allowable value of inclination is below 1/2000 (Diagram 3)
●Precautions of assembly
If you notice abnormal noises during the operation of the Ball Screw or jamming during movement after assembly, please loosen the connections of the parts before proceeding. Adjust and reassemble after moving smoothly.
- Error in the left and right direction of the support unit (Fig. 1)
- Parallel error of linear guide and ball screw (Fig. 2)
- Fixing of workbench and nut bracket
- Fixing of ball screw nut and nut bracket
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| E-TBS0601-[60-170/1] |
| E-TBS0602-[60-170/1] |
| E-TBS0606-[60-170/1] |
| E-TBS0610-[60-170/1] |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Lead (mm) | Shaft Screw Overall Length L (mm) |
|---|---|---|---|---|---|---|
- | 1 Piece(s) | 15 Day(s) | 1 | 60 ～ 170 | ||
- | 1 Piece(s) | 15 Day(s) | 2 | 60 ～ 170 | ||
- | 1 Piece(s) | 15 Day(s) | 6 | 60 ～ 170 | ||
- | 1 Piece(s) | 15 Day(s) | 10 | 60 ～ 170 |
Loading...
Brand Introduction
Since its establishment in 1963 in Japan, MISUMI Group Inc. has been providing customers with a wide range of high quality parts such as FA factory automation parts, mold parts, electronic parts, tools and consumables in a fast and accurate manner. We have created a low-cost business model by compiling our own catalogs and establishing a marketing system to sell our products directly, and we continue to develop MISUMI branded products with a high level of quality by developing an annual product plan based on customer feedback and requests. MISUMI established MISUMI Precision Machinery Co., Ltd. in China in June 2003, and then changed its name to MISUMI (China) Precision Machinery Trading Co., Ltd. in June 2007, with its headquarters in Shanghai. Since the beginning of the stamping die standard parts business, the businesses of FA standard parts, plastic die standard parts and machining tools have been officially started successively, and the rapid development of MISUMI in China has won the full support of customers. China's manufacturing industry has unlimited prospects, which is why China's manufacturing industry market has become one of the most competitive industries in the world. Thus was born MISUMI's business philosophy - the key to the future of manufacturing in China is cost competitiveness as well as "quality" and "time".
Basic Information
| Screw Shaft O.D.(Ø) | 6 | Type | Rolled | Accuracy Grade | C7 |
|---|
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Frequently asked question (FAQ)
- Question: What is the operating temperature limit for the ball screw?
- Answer: The operating temperature limit for the ball screw is 80°. Exceeding this limit will cause damage to the circulating parts and seals, as well as the deformation of the screw shaft and nut, affecting the life. Grease has a good effect of reducing the temperature, so regular maintenance such as grease injection to the ball screw will improve the service life of the screw.
- Question: How to do if there is abnormal noise heard in use?
- Answer: MISUMI does not guarantee there is no abnormal noise during use. If abnormal noise occurs, please check the installation accuracy and the correct selection of surrounding parts. Please loosen the parts before re-adjustment. Please refer to "Precautions" for details.
Additional Products in this Category
- Rolled Ball Screws Standard Nut - Shaft Dia. 20; Lead 5, 10, 20 - Accuracy Grade C7, C10
- Rolled Ball Screw Made in Taiwan, Shaft Diameter ø10, Lead 2/4
- Rolled Ball Screw Made in Taiwan, Shaft Diameter ø12, Lead 4/5/10
- Precision Ball Screws Shaft Dia.50 Lead 10/20/50 Precision Grade C5
- [Clean & Pack]Ball Screw Nut Bracket - Block Type
- Shaft Tip Complete Product Precision Ball Screw (BNK Type), Shaft Diameter: 4, Lead: 1
- Rolled Ball Screw, No Preloading Type (Nut Single Unit) WTF
- Shaft Tip Complete Product Precision Ball Screw (BNK Type), Shaft Diameter: 15, Lead: 20
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy