(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Webcode Seach | Series
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

Loading

  • [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

  • How can we improve?

    How can we improve?

    Comments
    Name (Optional)
    E-mail Address (Optional)
    Tel (Optional)

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Customer Privacy Policy

    Thank you for your cooperation.

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Please use the inquiry form.

    Customer Privacy Policy

Miniature Linear Guides Short Blocks (E-SMLGB7S)

Miniature Linear Guides Short Blocks E-SMLGB7S
  • Volume Discount
Check FAQ of this product (8 items)

MISUMI

MiSUMi Economy

MISUMI

  • RoHS

Part Number

Configured Part Number is shown.

E-SMLGB7S

Product Overview of Standard Linear Guides

Product of Standard Linear Guides Comparison

 MISUMI Product of Standard Linear Guides
SSEBS		Economy Series
E-GMLG□S
Material of
Linear Guides		Guide RailSUS440C equivalentCarbon Steel
BlockSUS440C
Hardness56HRC up58HRC up
Rail
Surface Treatment		None
(Option:Low-Temp Black Chrome Plating)		Vacuum Chrome Plating
Preload ManagementYN
Model No. Selection ReferenceHeight H ReferenceRail Width WR Reference
RoHS10CompliantCompliant

Dimensional Drawing





Material of Standard Linear Guides

Type of Standard Linear GuidesStandard Linear Guides MaterialStandard Linear Guides Surface TreatmentStandard Linear Guides Hardness
Standard Standard Linear GuidesBlockRetainer
E－GMLGBearing SteelStainless SteelResinVacuum Evaporated
Chrome Plating		58HRC～
E－SMLGStainless SteelStainless SteelResin--

Specification Table of Standard Linear Guides

Standard Linear Guides
 
Part No.Standard Linear GuidesLength L
(1mm Increments)		Block Dimensions (mm)Standard Linear Guides Dimensions (mm)
Standard Linear GuidesType of Standard Linear GuidesStandard Linear GuidesNominalWBB1L1L2GnM×LH2HH1NHRWRCounterbore
d×D×h		PE
E-GMLG
E-SMLG		7S25～90017122.59.619.8Φ1.2M2×2.51.58254.872.4×4.2×2.315Please
refer to “E
Dimension”
chart.
9S35～900201511.922.7Φ1.4M3×31.81025.56.593.5×6×3.520
12S45～90027203.51325.7Φ2M3×3.52.51337.58123.5×6×4.525
15S70～900322517.733.2M3M3×431648.510153.5×6×4.540
 
Standard Linear Guides The Standard Linear Guides kit includes 1 block. For additional blocks, please select alterations(B2~)
Standard Linear Guides Standard Linear Guides For vacuum chrome plating products, the cut surface on both ends is not treated.
Standard Linear Guides Dimension E of length specified type needs to be calculated. Please refer to "Detailed dimension of Dimension L specified type" for calculation method.
Standard Linear Guides The running parallelism is the value after the slide rail is fixed. (It is not the value before the screws of the slide rail are tightened.)
 Optional heights and lengths are the overall range of this series. Refer to the Specification Table for details.
 
■Load Capaity of Standard Linear Guides
NominalBasic Rated LoadStatic Allowable MomentMass
C(Dynamic）
kN		Co（Static）
kN		MA
N-m		MB
N-m		MC
N-m		Block
kg		Rail
kg/m
7S0.791.271.91.64.60.0080.19
9S1.161.683.12.67.90.0150.31
12S1.632.385.24.414.80.0250.61
15S3.084.2312.310.332.60.051.02
 
■ Detailed dimension of L dimension specified type of Standard Linear Guides
Dimension L specified type cuts both ends of the rail equally. Refer to the table below for the number of mounting holes (M) of the rail at this time.
In addition, Dimension E's calculation formula is as follows

"E"  calculation formula
 
尺寸图尺寸图

Economy series Miniature Standard Linear Guides - Short Block Type -
H8101316Number of Holes
M
L25～3535～ 4745～ 5770～ 872
36～5048～ 6758～ 8288～ 1273
51～6568～ 8783～ 107128～ 1674
66～8088～ 107108～ 132168～2075
81～95108～ 127133～ 157208～ 2476
96～ 110128～ 147158～ 182248～ 2877
111～ 125148～ 167183～ 207288～ 3278
126～ 140168～ 187208～ 232328～ 3679
141～ 155188～ 207233～ 257368～ 40710
156～ 170208～ 227258～ 282408～ 44711
171～ 185228～ 247283～ 307448～ 48712
186～ 200248～ 267308～ 332488～52713
201～ 215268～ 287333～ 357528～56714
216～ 230288～ 307358～ 382568～60715
231～ 245308～ 327383～ 407608～64716
246～ 260328～ 347408～432648～68717
261～ 275348～ 367433～457688～73018
276～ 290368～387458～482728～76719
291～ 305388～407483～507768～80720
306～ 320408～427508～532808～84721
321～ 335428～447533～557848～88722
336～350448～467558～582888～90023
351～365468～487583～607-24
366～380488～507608～63225
381～395508～527633～65726
396～410528～547658～68227
411～425548～567683～70728
426～440568～587708～72729
441～455588～607733～75230
456～470608～627758～77731
471～485628～647783～80232
486～500648～667808～82733
501～515668～687833～85234
516～530688～707858～87735
531～545708～727883～90036
546～560728～747-37
561～575748～76738
576～590768～78739
591～605788～80740
606～620808～82741
621～635828～84742
636～650848～86743
651～665868～88744
666～680888～90045
681～695-46
696～71047
711～72548
726～74049
741～75550
756～77051
771～78552
786～80053
801～81554
816～83055
831～84556
846～86057
861～87558
876～89059
891～90060
P15202540 

Precision of Standard Linear Guides

Dimensional Precision Unit：μm
Standard Linear Guides TypePrecision CriteriaMISUMI Economy SeriesMISUMI Standard Products
Miniature Standard Linear GuidesHeight H Tolerance±20±20
Height H Pair Variation4040
Width N Tolerance±25±25
Width N Pair Variation4040
ApplicationsLow and medium frequency driveHigh frequency drive
*The precision of the Economy series products of Standard Linear Guides has been improved.
直线导轨尺寸精度示意图
●Travel(Running) Parallelism of Miniature Linear Guides
Standard Linear Guides Length（mm）Precision（μm）
Less than 5016
50-8018
80-12521
125-20021
200-25022
250-31523
315-40025
400-50026
500-63028
630-80030
800-90032
Standard Linear Guides

Alterations of Standard Linear Guides

Standard Linear Guides

Product Feature of Standard Linear Guides

Feature 1: New Standard Linear Guides construction, greatly reducing noise and improving smoothness.
Feature 2: The Standard Linear Guides and the slider are in contact with each other through the rolling ball, so the shaking is small, and it is suitable for equipment with precision requirements.
Feature 3: Due to a point-to-surface contact, the frictional resistance is small, and it can perform subtle movements to achieve high precision positioning of the device.
Feature 4: It has a large allowable load because the force on the rotating surface is dispersed due to the rolling groove of the ball.
Feature 5: It is suitable for high-speed motion because it is not easy to produce friction heat when operating and not easily deformed by heat.

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...

CAD Download

30
45
60
  1. 1
Part Number
E-SMLGB7S
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipRail Length L
(mm) 		Block Type
(mm) 		Assembly Height H
(mm) 		Nominal Part Number Rail Type Set / Single Item Preload
(N・m) 		Accuracy Standards
(N・m) 		Material No. of Blocks
(mm) 		Lubrication Type
(mm) 		Lubrication Type L Dimension Type Applicable Linear Guide Block Material (Surface Treatment) Rail Material (Surface Treatment) Rail Surface Treatment

MYR 34.66

1 Piece(s)Available 9 Day(s) ----------Lubrication Applied------

Loading...

  1. 1

Basic Information

Ball Arrangement Miniature Type Retainer N/A Rolling Element Ball

Please check the type/dimensions/specifications of the part E-SMLGB7S in the Miniature Linear Guides Short Blocks series.

Configure

Clear All

1 Part Numbers

View Part Numbers

Configure Remaining Specifications
Completed
loading

Specification/Dimensions

  • Rail Length L(mm)

     

    Clear

  • Block Type(mm)

    • Short
      • Short Block

    Clear

  • Assembly Height H(mm)

    • 8
    • 10
    • 13
    • 16

    Clear

  • Nominal Part Number

    • 7
    • 9
    • 12
    • 15
    • 15$12

    Clear

  • Rail Type

    • Standard Rail

    Clear

  • Set / Single Item

    • Set
    • Block Only

    Clear

  • Preload(N・m)

    • Clearance
      • Normal Clearance

    Clear

  • Accuracy Standards(N・m)

    • Standard Grade

    Clear

  • Material

    • Carbon Steel
    • Stainless Steel

    Clear

  • No. of Blocks(mm)

    • 1

    Clear

  • Lubrication Type

    • Lithium Grease Filled

    Clear

  • L Dimension Type

    • Specified Type

    Clear

  • Applicable Linear Guide

    • E-GMLGB7S / E-SMLGB7S
    • E-GMLGB9S / E-SMLGB9S
    • E-GMLGB12S / E-SMLGB12S
    • E-GMLGB15S / E-SMLGB15S

    Clear

  • Block Material (Surface Treatment)

    • Carbon Steel (Bearing Steel)
    • Stainless Steel

    Clear

  • Rail Material (Surface Treatment)

    • Carbon Steel (Bearing Steel)
    • Stainless Steel

    Clear

  • Rail Surface Treatment

    • Vacuum evaporated chrome plating
    • none

    Clear

  • Lubrication Type(mm)

    • Lubrication Applied

    Clear

  • CAD

    • 2D
    • 3D

    Clear

Days to Ship

    • All
    • 1 Day(s) or Less
    • 5 Day(s) or Less
    • 9 Day(s) or Less
    • 10 Day(s) or Less

    Clear

Specify Alterations

Frequently asked question (FAQ)

Question: Can linear guides or sliders be purchased separately?
Answer: Taking into account the accuracy of products, single slider models clearly indicated in the catalog can be purchased, and no others can be purchased.
Question: Can the stainless steel guide rails be guaranteed not to rust?
Answer: Stainless steel is a product that has a certain antirust function compared to carbon steel, but it cannot be guaranteed that it will never rust. Depending on the operating environment, there may also be short-term rust.
Question: What problems should be paid attention to when the linear guide is installed vertically?
Answer: Attention should be paid to prevent the slider from falling off and causing the balls to fall off during installation.
Question: What does micro preloading in linear guide mean?
Answer: MISUMI's linear guides control the clearance by selecting the size of the internal ball. Through the negative clearance, the rigidity is improved and the elastic displacement is reduced. This is preloading. Generally speaking, the life and accuracy of the micro preloading type will be better than that of the standard clearance type.
Question: Linear guide indicators include basic dynamic load rating and basic static load rating. Which indicator is the reference when selecting?
Answer: The basic dynamic load rating is used to calculate the rail life, and the basic static load rating is used to calculate the maximum allowable load.
Question: Can the corresponding linear guide products be selected according to the third-party guide rail model?
Answer: MISUMI offers third-party brand replacement services, so as long as the third party product model is given, we can replace it with corresponding MISUMI model. For details, please contact the customer service email or call the customer service phone.
Question: Can the rail or slider be repaired if it is damaged?
Answer: Repair service is not provided, re-purchase is recommended.
Question: Can linear guide length be arbitrarily specified?
Answer: It can be specified arbitrarily. However, MISUMI linear guides are divided into length fixed type and length specified type, and in case of length specified type, the length dimensions for length fixed type cannot be specified.

Check other FAQ (5 items) Hide

Products like this...

Part Number
E-MLGB15S
E-MLGB7S
E-MLGB9S
E-SMLGB12S
E-SMLGB15S
E-SMLGB9S
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipRail Length L
(mm) 		Block Type
(mm) 		Assembly Height H
(mm) 		Nominal Part Number Rail Type Set / Single Item Preload
(N・m) 		Accuracy Standards
(N・m) 		Material No. of Blocks
(mm) 		Lubrication Type
(mm) 		Lubrication Type L Dimension Type Applicable Linear Guide Block Material (Surface Treatment) Rail Material (Surface Treatment) Rail Surface Treatment

MYR 63.20

1 Piece(s)Available 9 Day(s) -[Short] Short Block1615$12Standard RailBlock Only[Clearance] Normal ClearanceStandard GradeStainless Steel----E-GMLGB15S / E-SMLGB15SStainless Steel--

MYR 41.00

1 Piece(s)Available 9 Day(s) -[Short] Short Block87Standard RailBlock Only[Clearance] Normal ClearanceStandard GradeStainless Steel----E-GMLGB7S / E-SMLGB7SStainless Steel--

MYR 42.88

1 Piece(s)Available 9 Day(s) -[Short] Short Block109Standard RailBlock Only[Clearance] Normal ClearanceStandard GradeStainless Steel----E-GMLGB9S / E-SMLGB9SStainless Steel--

MYR 38.15

1 Piece(s)Available 9 Day(s) ----------Lubrication Applied------

MYR 47.12

1 Piece(s)Available 1 Day(s) ----------Lubrication Applied------

MYR 34.86

1 Piece(s)Available 9 Day(s) ----------Lubrication Applied------

Additional Products in this Category

Tech Support

Technical Inquiry

Payment Method

more
  • Credit Card
    • VISA
    • MasterCard
  • Bank Transfer
    • FPX
    • Interbank GIRO (IBG)

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm,    9am – 1pm(Sat) * Order cut-off time is 12pm

  • Tel: (60) 3 7890 6399
Inquiry
Mobile View

Copyright © MISUMI Corporation All Rights Reserved.