(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Leveling Mounts Unti-Slip Rubber Pad, Universal Type (E-CFJFNVDS80-20-100)
- Volume Discount
MiSUMi Economy
[Features]
·Cost-effective adjuster
- RoHS
Part Number
Configured Part Number is shown.
E-CFJFNVDS80-20-100
Product Overview of Adjuster Bolt
Adjuster Bolt, Economy series Leveling Mounts Anti-Slip Universal Type
A leveling mount with high quality, cheap price and excellent cost performance
Note 1) “Allowable load” in this specification table is for the vertical direction only
A leveling mount with high quality, cheap price and excellent cost performance
Dimensional Drawing of Adjuster Bolt
■Dimensional Drawing of Adjuster Bolt
■Material Table of Adjuster Bolt
■Material Table of Adjuster Bolt
| Type |  Material |  Surface Treatment | |||
| Screw | Base | Bottom Glue Part | Screw | Base | |
| ① | S45C | Rubber | Zinc Plating | ||
| ② | SUS304 | Rubber | Buffed | ||
Specifications Overview of Adjuster Bolt
| Width D | Thread Specification M | Thread Length A | Body Height L | ℓ1 | ℓ2 | E | H | h | B | Allowable Load (KN) |
| 65 | 12 | 100 | 137 | 8 | 10 | 24 | 8 | 6 | 19 | 4 |
| 150 | 187 | |||||||||
| 16 | 100 | 139 | 10 | 13 | 24 | 4 | ||||
| 150 | 189 | |||||||||
| 80 | 16 | 100 | 141 | 10 | 13 | 26 | 9 | 6 | 24 | 10 |
| 150 | 191 | |||||||||
| 20 | 100 | 144 | 13 | 16 | 30 | 14 | ||||
| 150 | 194 | |||||||||
| 200 | 244 | |||||||||
| 100 | 20 | 100 | 148 | 13 | 16 | 29 | 10 | 7 | 30 | 20 |
| 150 | 198 | |||||||||
| 200 | 248 | |||||||||
| 24 | 100 | 150 | 15 | 19 | 36 | 25 | ||||
| 150 | 200 | |||||||||
| 200 | 250 |
Product Features of Adjuster Bolt
【Features of Adjuster Bolt】
No height adjustment knob.
【Material Table of Adjuster Bolt】
No height adjustment knob.
【Material Table of Adjuster Bolt】
| Type | Material | Surface Treatment | |||
| Screw | Base | Bottom Glue Part | Screw | Base | |
| ① | S45C | Rubber | Zinc Plating | ||
| ② | SUS304 | Rubber | Buffed | ||
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| E-CFJFNVDS80-20-100 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Thread Length A (mm) | Nominal of Thread M (mm) | Body Material | Thread Material | Main Body Surface Treatment | Thread Surface Treatment | Width D (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 120.22 | 4 Piece(s) | Available | 6 Day(s) | 100 | 20 | [Stainless Steel] SUS304 | [Stainless Steel] SUS304 | Buffed | Buffed | 80 |
Loading...
Dimensional Drawing
The bottom of the product is hollowSpecification Table
| Width D | Thread Specification M | Thread Length A | Body Height L | ℓ1 | ℓ2 | E | H | h | B | Allowable Load (KN) |
| 65 | 12 | 100 | 137 | 8 | 10 | 24 | 8 | 6 | 19 | 4 |
| 150 | 187 | |||||||||
| 16 | 100 | 139 | 10 | 13 | 24 | 4 | ||||
| 150 | 189 | |||||||||
| 80 | 16 | 100 | 141 | 10 | 13 | 26 | 9 | 6 | 24 | 10 |
| 150 | 191 | |||||||||
| 20 | 100 | 144 | 13 | 16 | 30 | 14 | ||||
| 150 | 194 | |||||||||
| 200 | 244 | |||||||||
| 100 | 20 | 100 | 148 | 13 | 16 | 29 | 10 | 7 | 30 | 20 |
| 150 | 198 | |||||||||
| 200 | 248 | |||||||||
| 24 | 100 | 150 | 15 | 19 | 36 | 25 | ||||
| 150 | 200 | |||||||||
| 200 | 250 |
Material Specification
| Type |  Material |  Surface Treatment | |||
| Screw | Base | Bottom Glue Part | Screw | Base | |
| ① | S45C | Rubber | Zinc Plating | ||
| ② | SUS304 | Rubber | Buffed | ||
■Usage difference between MISUMI economy series and MISUMI standard product
■MISUMI economy series load assurance
・The load of MISUMI economy series leveling mount is clearly indicated, and it is guaranteed by third-party testing for more assured use. Test results of allowable load according to GB standard
・The load of MISUMI economy series leveling mount is clearly indicated, and it is guaranteed by third-party testing for more assured use. Test results of allowable load according to GB standard
Usage Method
Recommended leveling mount installation method
On the premise of ensuring safety, raise the equipment with a forklift (light equipment can roll the equipment sideways) to a height that is convenient to screw into the inner teeth.
Screw in the leveling mount through threads. After assembling the required number of leveling mounts, lower the forklift and adjust horizontally.
Precautions
1. Check whether the screw can be mounted with female thread (it is recommended to re-tap after coating the threads).
2. The selection leveling mount should be screwed in more than half of the thread as far as possible (the shorter thread screwed in, the greater the bearing capacity).
3. For heavy equipment, it is recommended to add lubricating grease to threads for easy adjustment.
On the premise of ensuring safety, raise the equipment with a forklift (light equipment can roll the equipment sideways) to a height that is convenient to screw into the inner teeth.
Screw in the leveling mount through threads. After assembling the required number of leveling mounts, lower the forklift and adjust horizontally.
Precautions
1. Check whether the screw can be mounted with female thread (it is recommended to re-tap after coating the threads).
2. The selection leveling mount should be screwed in more than half of the thread as far as possible (the shorter thread screwed in, the greater the bearing capacity).
3. For heavy equipment, it is recommended to add lubricating grease to threads for easy adjustment.
Example of Use
Related Products
| Recommended product 1 | Recommended product 2 | Recommended product 3 |
| Economy Series Butterfly Hinges Tapered Hole Type Stainless Steel | Economy Series Normal Cylindrical Locks | Economy Series Casters Universal Type |
 |  |  |
Basic Information
| Type | Adjusting Bolt Type | Adjusting Bolt Shape Type | Rubber Foot Type | Mounting Shape Type | Rubber Mount Type |
|---|---|---|---|---|---|
| Swivel Angle θ(deg) | 15° | Swivel Mechanism | Provided |
Please check the type/dimensions/specifications of the part E-CFJFNVDS80-20-100 in the Leveling Mounts Unti-Slip Rubber Pad, Universal Type series.
Specification/Dimensions
-
type
- E-CFJFNVD
- E-CFJFNVDS
-
Thread Length A(mm)
-
Nominal of Thread M(mm)
-
Body Material
- Stainless Steel
- Steel
- Stainless Steel
-
Thread Material
- Stainless Steel
- Steel
- Stainless Steel
-
Main Body Surface Treatment
- Buffed
- Chrome Plating
-
Thread Surface Treatment
- Buffed
- Zinc Plating
-
Width D(mm)
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 1 Day(s) or Less
- 6 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Frequently asked question (FAQ)
- Question: Can the Economy series Leveling Mounts Anti-Slip Universal Type be used on inclined ground?
- Answer: The Economy series Leveling Mounts Anti-Slip Universal Type can be used on inclined ground and its direction is adjustable. The maximum adjustment angle is 15 °, with a certain degree of angle compensation.
- Question: Do the Economy series Leveling Mounts Anti-Slip Universal Type come with a height adjustment knob?
- Answer: The Economy series Leveling Mounts Anti-Slip Universal Type do not have a height adjustment knob (handle) and are just general leveling mounts.
Products like this...
| Part Number |
|---|
| E-CFJFNVD100-20-200 |
| E-CFJFNVD100-24-100 |
| E-CFJFNVD100-24-150 |
| E-CFJFNVD100-24-200 |
| E-CFJFNVDS80-20-150 |
| E-CFJFNVDS80-20-200 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Thread Length A (mm) | Nominal of Thread M (mm) | Body Material | Thread Material | Main Body Surface Treatment | Thread Surface Treatment | Width D (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 83.16 | 4 Piece(s) | Available | 6 Day(s) | 200 | 20 | [Steel] Steel | [Steel] Steel | Chrome Plating | Zinc Plating | 100 | |
MYR 81.42 | 4 Piece(s) | Available | 6 Day(s) | 100 | 24 | [Steel] Steel | [Steel] Steel | Chrome Plating | Zinc Plating | 100 | |
MYR 86.24 | 4 Piece(s) | Available | 6 Day(s) | 150 | 24 | [Steel] Steel | [Steel] Steel | Chrome Plating | Zinc Plating | 100 | |
MYR 90.82 | 4 Piece(s) | Available | 6 Day(s) | 200 | 24 | [Steel] Steel | [Steel] Steel | Chrome Plating | Zinc Plating | 100 | |
MYR 130.24 | 4 Piece(s) | Available | 6 Day(s) | 150 | 20 | [Stainless Steel] SUS304 | [Stainless Steel] SUS304 | Buffed | Buffed | 80 | |
MYR 135.32 | 4 Piece(s) | Available | 6 Day(s) | 200 | 20 | [Stainless Steel] SUS304 | [Stainless Steel] SUS304 | Buffed | Buffed | 80 |
Additional Products in this Category
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy