[Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

[Clean & Pack] Pivot Pin - Straight, Retaining Ring (SHD-SCDG12-45)

Click this image to zoom it.

Move the mouse over the image to zoom

Volume Discount

Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.

■Part Number for Clean & Pack Products

·Degreasing (Anti-rust single packing)	: Part Number SL-□□
·Precision cleaning (Degassing double packing)	: Part Number SH-□□
·Electrolytic polishing + precision cleaning (Degassing double packing)	: Part Number SHD-□□

Product Part Number	Cleaning Method	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Process
SL-□□	Degreasing	Anti-rust packing	Oil removal	General environment	Regular assembly process
					Post battery assembly process
SH-□□	Precision cleaning	Degassing double packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000)	Battery assembly process
					LCD-related post assembly process
					In-vehicle camera assembly process
SHD-□□	Electrolytic polishing + precision cleaning	Degassing double packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000)	Pre-semiconductor process
					Liquid crystal deposition process
					Pre-OLED process

■Notes
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.

(i)Caution

Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.

Part Number

Configured Part Number is shown.

SHD-SCDG12-45

Drawing/Specifications
3D Preview
Part Numbers

Dimensional Drawing

Pivot Pin - Straight Retaining Ring Type:Related Image

*D_g6 Tolerance is available for L dimensions only. The negative tolerance is applied to other dimensions.

[ ! ] SL-PCCG and SH-PCCG may have identification grooves.

[ ! ] This type may have centering holes depending on dimensions.
[ ! ] Two retaining rings are included.

SL-PCCG, SH-PCCG
Identification Groove

D Tolerance (g6)
2, 3	-0.002 -0.008
4 to 6	-0.004 -0.012
8, 10	-0.005 -0.014
12 to 18	-0.006 -0.017
20 to 25	-0.007 -0.020

Type		[ M ] Material	[ H ] Hardness	[ S ] Surface Treatment	[ A ] Accessory		Cleaning Method
L Dimension Fixed Type	L Dimension Configurable Type	[ M ] Material	[ H ] Hardness	[ S ] Surface Treatment	[ A ] Accessory		Cleaning Method	Cleaning Environment	Packaging Type	Packing Environment
SL-SCDG	SL-SCCG	SUS304 Equivalent	-	-	Retaining Ring 2 pcs.	[ M ] SUS304	Degreasing	General environment	Anti-rust packing	General environment
SH-SCDG	SH-SCCG						Precision cleaning	Class 1,000	Degassing double packing	Class 10
SHD-SCDG	SHD-SCCG						Electrolytic polishing + precision cleaning	Class 1,000	Degassing double packing	Class 10
-	SL-PCCG	S45C Equivalent	-	Electroless Nickel Plating			Degreasing	General environment	Anti-rust packing	General environment
	SH-PCCG		-				Precision cleaning	Class 1,000	Degassing double packing	Class 10
	SL-PCCGH		40 to 45HRC				Degreasing	General environment	Anti-rust packing	General environment
	SH-PCCGH		40 to 45HRC				Precision cleaning	Class 1,000	Degassing double packing	Class 10
	SL-GCCG		Plating Hardness 750 HV or more	Hard Chrome Plating		[ M ]Spring Steel	Degreasing	General environment	Anti-rust packing	General environment
	SH-GCCG		Plating Hardness 750 HV or more	Hard Chrome Plating		[ M ]Spring Steel	Precision cleaning	Class 1,000	Degassing double packing	Class 10
-	SL-SCCGH	SUS440C or 13Cr Stainless Steel	45 to 50HRC	-		[ M ] SUS304	Degreasing	General environment	Anti-rust packing	General environment
	SH-SCCGH		45 to 50HRC	-			Precision cleaning	Class 1,000	Degassing double packing	Class 10
	SL-GSCCGH		45 to 50HRC Plating Hardness 750 HV or more	Hard Chrome Plating			Degreasing	General environment	Anti-rust packing	General environment
	SH-GSCCGH		45 to 50HRC Plating Hardness 750 HV or more	Hard Chrome Plating			Precision cleaning	Class 1,000	Degassing double packing	Class 10

[ ! ] Products are packed by order quantity. Ex. If the order is for 20 pieces, they are packed in one package (incl. 20 pieces).
[ ! ] See the

details of degreasing, precision cleaning, and electrolytic polishing shown at the bottom of the specification table.

Specification Table

Part Number	-	L
SL-SCDG8	-	30
SHD-SCCG20	-	100.5

■L Dimension Fixed Type

Part Number		L														m	d		Included Retaining Ring
Type	D	Selection																Tolerance	Shape	JIS Nominal
SUS304 Equivalent SL-SCDG SL-SCDG SL-SCDG	3	10	12	14	15	16	18	20	22	25	30					0.5	2	+0.06	E Type	No. 2
	4															0.7	3	0		No. 3
	5																4	+0.075		No. 4
	6				15	16	18	20	22	25	30	35	40	45	50		5	0		No. 5
	8															0.9	7	+0.09		No. 7
																		0
	10						18	20	22	25	30	35	40	45	50	1.15	9.6	0	C Type	No. 10
																		-0.09
	12								22	25	30	35	40	45	50		11.5	0		No. 12
																		-0.11

■L Dimension Configurable Type (0.1 mm Increments)

Part Number		L 0.1 mm Increments	m		N	d		Included Retaining Ring
Type	D	L 0.1 mm Increments		Tolerance	N		Tolerance	Shape	JIS Nominal
SL-SCCG SH-SCCG SHD-SCCG SL-PCCG SH-PCCG SL-PCCGH SH-PCCGH SL-GCCG SH-GCCG SL-SCCGH SH-SCCGH SL-GSCCGH SH-GSCCGH	2	5.0 to 50.0	0.5	+0.05 　 0	2	1.5	+0.06 　 0	E Type	No. 1.5
	3	5.0 to 70.0	0.5	+0.05 　 0		2			No. 2
	4	5.0 to 70.0	0.7	+0.1 　 0		3			No. 3
	5	5.0 to 100.0				4	+0.075 　 0		No. 4
	6	5.0 to 150.0				5	+0.075 　 0		No. 5
	8	5.0 to 150.0	0.9		3	7	+0.09 　 0		No. 7
	10	10.0 to 150.0	1.15	+0.14 　 0	3	9.6	0 -0.09	C Type	No. 10
	12	10.0 to 200.0			4	11.5	0 -0.11		No. 12
	13	15.0 to 200.0				12.4			No. 13
	14					13.4			No. 14
	15					14.3			No. 15
	16	20.0 to 200.0				15.2			No. 16
	17					16.2			No. 17
	18		1.35			17			No. 18
	20					19	0 -0.21		No. 20
	22					21			No. 22
	25					23.9			No. 25

[ ! ] SL(SH)-SCCGH may be discolored by hardening.

Alterations

Part Number	-	L	-	(NC)
SHD-SCCG15	-	120.3	-	NC3

[ ! ] Applicable to L Dimension Configurable Type

Alteration

Retaining Ring Groove Position

[Clean & Pack] Pivot Pin - Straight Retaining Ring Type:Related Image

Code

Spec.

Ordering Code NC3

D	NC (Selection Range)
2 to 4	1.5 to 3
5	1.7 to 3
6	1.9 to 4
8	2.4 to 5
10 to 18	2.7 to 5
20 to 25	2.9 to 5

[ ! ] Overall Length is L + NC × 2.

Cleaning Process

· Degreasing (Part Number: SL-□□)

* Stainless steel products may be used with alkaline hot pure water. There is no change in cleanliness.
* If the surface treatment is low-temperature black chrome plating, IPA cleaning will be applied.

Working Environment: General environment
Hydrocarbon cleaning Ro water cleaning Neutral Detergent Cleaning		High-pressure jet washing (Ro water) followed by pure water cleaning		Oil-free Compressor Used		Anti-rust single packing

· Precision cleaning (Part Number: SH-□□)

				Working Environment: Class 1,000				Working Environment: Class 10
Hydrocarbon cleaning Ro water cleaning Neutral Detergent Cleaning		High-pressure jet washing (Ro water) followed by pure water (10 MΩ·cm) cleaning		Use pure water (13 MΩ·cm)		Use nitrogen blow		Conducted on a clean bench in a Class 10 clean environment

· Electrolytic polishing + precision cleaning (Part Number: SHD-□□)

						Working Environment: Class 1,000				Working Environment: Class 10
Hydrocarbon cleaning Ro water cleaning Neutral Detergent Cleaning		Electrolytic polishing with an electrolytic polishing layer according to the material		High-pressure jet washing (Ro water) followed by pure water (10 MΩ·cm) cleaning		Use warm pure water (13 MΩ·cm)		Use nitrogen blow		Conducted on a clean bench in a Class 10 clean environment

Packaging Example

For degreasing: (Part Number: SL-□□)	For precision cleaning or electrolytic polishing + precision cleaning:
For degreasing: (Part Number: SL-□□)	(Part Number: SH-□□/SHD-□□)
	For austenitic stainless steel and aluminum materials	For iron and martensitic stainless steel materials

Depending on some products and sizes, packaging type may vary.	[ ! ] Both the first and second layer packaging are degassed.	[ ! ] A desiccant is included as an anti-rust measure. There is one desiccant per package.

Cleaning Effectiveness / Recommended Environment for Use

Cleaning Method	Product Part Number	Packaging Type	Effects Compared to Uncleaned Product	Environment (Standard)	Use Case and Process
Degreasing	SL-□□	Anti-rust packing	Oil removal	General environment	Regular assembly process
Degreasing	SL-□□	Anti-rust packing	Oil removal	General environment	Post battery assembly process
Precision cleaning	SH-□□	Degassing double packing	Oil removal Dust removal	Clean environment (Class 10 to 1,000)	Battery assembly process
					LCD-related post assembly process
					In-vehicle camera assembly process
Electrolytic polishing + precision cleaning	SHD-□□	Degassing double packing	Oil removal Dust removal Outgas reduction	Vacuum environment Clean environment (Class 10 to 1,000)	Pre-semiconductor process
					Liquid crystal deposition process
					Pre-OLED process

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 45; 60

Part Number
SHD-SCDG12-45

Part Number	Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	Shaft Dia. D (mm)	Characteristics/Applications	Cleaning Method	Type	L Dimension (mm)	Material Certificate	Material Certificate: Material
	MYR 43.46	1 Piece(s)	Available	6 Day(s) or more	12	Clean Washed / Low Dust Generation / Vacuum / Corrosion Resistant / Chemical Resistant / Non-magnetic / Heat Resistance	Electrolytic Polishing + Precision Cleaning	L Dimension Selectable	45	Available	SUS304 Equivalent

Basic Information

Environmentally friendly	RoHS Compliant (10 Substances)	Mounting Method	Retaining Ring	Basic Shape	Straight
Material	Stainless Steel	Hardness	Not Spec-designed	Surface Treatment	Not Provided
Material Details	SUS304 Equivalent	Material Detail	SUS304 Equivalent	Hex Socket	N/A

Please check the type/dimensions/specifications of the part SHD-SCDG12-45 in the [Clean & Pack] Pivot Pin - Straight, Retaining Ring series.

Configure

1 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Characteristics/Applications
Clean Washed

Low Dust Generation

Vacuum

Corrosion Resistant / Chemical Resistant

Non-magnetic

Heat Resistance
Clear
Shaft Dia. D(mm)
2

3

4

5

6

8

10

12

13

14

15

16

17

18

20

22

25
Clear
Cleaning Method
- Degreasing
- Precision Cleaning
- Electrolytic Polishing + Precision Cleaning
Clear
Type
- L Dimension Configurable
- L Dimension Selectable
Clear
L Dimension(mm)
10

12

14

15

16

18

20

22

24

25

30

35

40

45

50
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

6 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Products like this...

Part Number
SH-SCDG10-24
SH-SCDG10-25
SH-SCDG10-30
SHD-SCDG12-50
SHD-SCDG3-10
SHD-SCDG3-12

Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	Shaft Dia. D (mm)	Characteristics/Applications	Cleaning Method	Type	L Dimension (mm)	Material Certificate	Material Certificate: Material
MYR 37.31	1 Piece(s)	Available	6 Day(s) or more	10	Corrosion Resistant / Chemical Resistant / Non-magnetic / Heat Resistance / Clean Washed / Low Dust Generation	Precision Cleaning	L Dimension Selectable	24	Available	SUS304 Equivalent
MYR 37.31	1 Piece(s)	Available	6 Day(s) or more	10	Corrosion Resistant / Chemical Resistant / Non-magnetic / Heat Resistance / Clean Washed / Low Dust Generation	Precision Cleaning	L Dimension Selectable	25	Available	SUS304 Equivalent
MYR 37.31	1 Piece(s)	Available	6 Day(s) or more	10	Corrosion Resistant / Chemical Resistant / Non-magnetic / Heat Resistance / Clean Washed / Low Dust Generation	Precision Cleaning	L Dimension Selectable	30	Available	SUS304 Equivalent
MYR 43.46	1 Piece(s)	Available	6 Day(s) or more	12	Vacuum / Corrosion Resistant / Chemical Resistant / Non-magnetic / Heat Resistance / Clean Washed / Low Dust Generation	Electrolytic Polishing + Precision Cleaning	L Dimension Selectable	50	Available	SUS304 Equivalent
MYR 28.08	1 Piece(s)	Available	6 Day(s) or more	3	Vacuum / Corrosion Resistant / Chemical Resistant / Non-magnetic / Heat Resistance / Clean Washed / Low Dust Generation	Electrolytic Polishing + Precision Cleaning	L Dimension Selectable	10	Available	SUS304 Equivalent
MYR 28.08	1 Piece(s)	Available	6 Day(s) or more	3	Vacuum / Corrosion Resistant / Chemical Resistant / Non-magnetic / Heat Resistance / Clean Washed / Low Dust Generation	Electrolytic Polishing + Precision Cleaning	L Dimension Selectable	12	Available	SUS304 Equivalent

Additional Products in this Category

Tech Support

: Technical Inquiry

How can we improve?

[Clean & Pack] Pivot Pin - Straight, Retaining Ring (SHD-SCDG12-45)

(i)Caution

Dimensional Drawing

Specification Table

Alterations

Part Number

Basic Information

Configure

Specification/Dimensions

Characteristics/Applications

Shaft Dia. D(mm)

Cleaning Method

Type

L Dimension(mm)

CAD

Days to Ship

Specify Alterations

Products like this...

Additional Products in this Category

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm