(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
[Clean & Pack] Shaft - One End Stepped, Both Ends Tapped
![[Clean & Pack] Shaft - One End Stepped, Both Ends Tapped](http://content.misumi-ec.com/image/upload/t_product_main/v1/p/jp/product/series/110310639089/110310639089_001_20240726160555.jpg?$product_main$)
Click this image to zoom it.
Move the mouse over the image to zoom
Three types of cleaning methods are available: degreasing, precision cleaning, and electrolytic polishing + precision cleaning. They can be ordered from one piece with the standard part number.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.
This eliminates the need for customer cleaning or outsourced cleaning, reducing the amount of time and effort required.
■Part Number for Clean & Pack Products
| ·Degreasing (Anti-rust single packing) | : Part Number SL-□□ |
| ·Precision cleaning (Degassing double packing) | : Part Number SH-□□ |
| ·Electrolytic polishing + precision cleaning (Degassing double packing) | : Part Number SHD-□□ |
| Product Part Number | Cleaning Method | Packaging Type | Effects Compared to Uncleaned Product | Environment (Standard) | Process |
| SL-□□ | Degreasing | Anti-rust packing | Oil removal | General environment | Regular assembly process |
| Post battery assembly process | |||||
| SH-□□ | Precision cleaning | Degassing double packing | Oil removal Dust removal | Clean environment (Class 10 to 1,000) | Battery assembly process |
| LCD-related post assembly process | |||||
| In-vehicle camera assembly process | |||||
| SHD-□□ | Electrolytic polishing + precision cleaning | Degassing double packing | Oil removal Dust removal Outgas reduction | Vacuum environment Clean environment (Class 10 to 1,000) | Pre-semiconductor process |
| Liquid crystal deposition process | |||||
| Pre-OLED process |
■Notes
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.
Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product.
Please be careful about the application location and storage environment.
(i)Caution
- See here for related information such as technical information on cleaning effects and other cleaned product lineups.
- Cleaning also removes rust prevention oil, which may make the product more susceptible to rusting than an uncleaned product. Please be careful about the application location and storage environment.
Part Number
Configured Part Number is shown.
One End Stepped, Both Ends Tapped Type
[ ! ] For plated products, the surface roughness of D part is
; and for unplated products, it is 
.
[ ! ] The dimension tolerances for L and F conform to JIS B 0405 class m.
One End Stepped, One End Tapped Type
[ ! ] For plated products, the surface roughness of D part is
; and for unplated products, it is .[ ! ] The dimension tolerances for L and F conform to JIS B 0405 class m.
■ One End Stepped, Both Ends Tapped Type
[ ! ] Low temperature black chrome plated products made of SUS440C or 13Cr stainless steel have identification grooves.
[ ! ] Hard chrome plating is applied after surface treatment of the base material, so there is no plating on the machined areas.
[ ! ] Annealing may lower hardness at shaft end machined areas (effective thread length + approx. 10 mm).
[ ! ] Products are packed by order quantity. Ex. If the order is for 20 pieces, they are packed in one package (incl. 20 pieces).
[ ! ] See the details of degreasing, precision cleaning, and electrolytic polishing shown at the bottom of the
specification table.
| Type | [ M ] Material | [ H ] Hardness | [ S ] Surface Treatment | Cleaning Method | |||||
| D Tolerance f8 | D Tolerance g6 | D Tolerance h5 | Cleaning Method | Cleaning Environment | Packaging Type | Packing Environment | |||
| SL-PSSFGA | - | - | SUS304 | - | Hard Chrome Plating Plating Hardness: HV750 or more Plating Thickness: 10 µ or more | Degreasing | General environment | Anti-rust packing | General environment |
| SH-PSSFGA | Precision cleaning | Class 1,000 | Degassing double packing | Class 10 | |||||
| - | SL-SSFAA | SL-SSFUE | SUS440C or 13Cr Stainless Steel | Induction Hardening SUJ2 Equivalent 58 HRC or more SUS440C or 13Cr Stainless Steel 56 HRC or more | - | Degreasing | General environment | Anti-rust packing | General environment |
| SH-SSFAA | SH-SSFUE | Precision cleaning | Class 1,000 | Degassing double packing | Class 10 | ||||
| - | SL-PSSFAA | SL-PSSFUE | Hard Chrome Plating Plating Hardness: HV750 or more Plating Thickness: 5 µ or more | Degreasing | General environment | Anti-rust packing | General environment | ||
| SH-PSSFAA | SH-PSSFUE | Precision cleaning | Class 1,000 | Degassing double packing | Class 10 | ||||
| - | SL-RSFAA | - | SUJ2 Equivalent | Low Temperature Black Chrome Plating | Degreasing | General environment | Anti-rust packing | General environment | |
| SH-RSFAA | Precision cleaning | Class 1,000 | Degassing double packing | Class 10 | |||||
| - | SL-RSSFAA | - | SUS440C or 13Cr Stainless Steel | Degreasing | General environment | Anti-rust packing | General environment | ||
| SH-RSSFAA | Precision cleaning | Class 1,000 | Degassing double packing | Class 10 | |||||
[ ! ] Hard chrome plating is applied after surface treatment of the base material, so there is no plating on the machined areas.
[ ! ] Annealing may lower hardness at shaft end machined areas (effective thread length + approx. 10 mm).
[ ! ] Products are packed by order quantity. Ex. If the order is for 20 pieces, they are packed in one package (incl. 20 pieces).
[ ! ] See the details of degreasing, precision cleaning, and electrolytic polishing shown at the bottom of the
specification table.■ One End Stepped, One End Tapped Type
[ ! ] Low temperature black chrome plated products made of SUS440C or 13Cr stainless steel have identification grooves.
[ ! ] Hard chrome plating is applied after surface treatment of the base material, so there is no plating on the machined areas.
[ ! ] Annealing may lower hardness at shaft end machined areas (effective thread length + approx. 10 mm).
[ ! ] Products are packed by order quantity. Ex. If the order is for 20 pieces, they are packed in one package (incl. 20 pieces).
[ ! ] See the details of degreasing, precision cleaning, and electrolytic polishing shown at the bottom of thespecification table.
| Type | [ M ] Material | [ H ] Hardness | [ S ] Surface Treatment | Cleaning Method | |||||
| D Tolerance f8 | D Tolerance g6 | D Tolerance h5 | Cleaning Method | Cleaning Environment | Packaging Type | Packing Environment | |||
| SL-PSSNGA | - | - | SUS304 | - | Hard Chrome Plating Plating Hardness: HV750 or more Plating Thickness: 10 µ or more | Degreasing | General environment | Anti-rust packing | General environment |
| SH-PSSNGA | Precision cleaning | Class 1,000 | Degassing double packing | Class 10 | |||||
| - | SL-SSFNA | SL-SSFEU | SUS440C or 13Cr Stainless Steel | Induction Hardening SUJ2 Equivalent 58 HRC or more SUS440C or 13Cr Stainless Steel 56 HRC or more | - | Degreasing | General environment | Anti-rust packing | General environment |
| SH-SSFNA | SH-SSFEU | Precision cleaning | Class 1,000 | Degassing double packing | Class 10 | ||||
| - | SL-PSSFNA | SL-PSSFEU | Hard Chrome Plating Plating Hardness: HV750 or more Plating Thickness: 5 µ or more | Degreasing | General environment | Anti-rust packing | General environment | ||
| SH-PSSFNA | SH-PSSFEU | Precision cleaning | Class 1,000 | Degassing double packing | Class 10 | ||||
| - | SL-RSFNA | - | SUJ2 Equivalent | Low Temperature Black Chrome Plating | Degreasing | General environment | Anti-rust packing | General environment | |
| SH-RSFNA | Precision cleaning | Class 1,000 | Degassing double packing | Class 10 | |||||
| - | SL-RSSFNA | - | SUS440C or 13Cr Stainless Steel | Degreasing | General environment | Anti-rust packing | General environment | ||
| SH-RSSFNA | Precision cleaning | Class 1,000 | Degassing double packing | Class 10 | |||||
[ ! ] Hard chrome plating is applied after surface treatment of the base material, so there is no plating on the machined areas.
[ ! ] Annealing may lower hardness at shaft end machined areas (effective thread length + approx. 10 mm).
[ ! ] Products are packed by order quantity. Ex. If the order is for 20 pieces, they are packed in one package (incl. 20 pieces).
[ ! ] See the details of degreasing, precision cleaning, and electrolytic polishing shown at the bottom of the
specification table.Specification Table
| Part Number | - | L | - | F | - | P | - | M | - | N |
| SL-PSSFGA20 | - | 400 | - | F25 | - | P16 | - | M10 | - | N10 |
| SH-PSSNGA25 | - | 450 | - | F25 | - | P16 | - | - | N10 |
| D Tolerance | |||
| D | f8 | g6 | h5 |
| 8 | -0.013 -0.035 | -0.005 -0.014 | 0 -0.006 |
| 10 | |||
| 12 | -0.016 -0.043 | -0.006 -0.017 | 0 -0.008 |
| 13 | |||
| 15 | |||
| 16 | |||
| 18 | |||
| 20 | -0.020 -0.053 | -0.007 -0.020 | 0 -0.009 |
| 25 | |||
| 30 | |||
| 35 | -0.025 -0.064 | -0.009 -0.025 | 0 -0.011 |
| 40 | |||
| 50 | |||
■ One End Stepped, Both Ends Tapped Type
[ ! ] N ( ) dimension is only available for D Tolerance g6. [ ! ] Overall length (Y) requires M × 2+N × 2 ≥ (Y).
[ ! ] When M × 2.5 + 4 + N × 2.5 + 4 ≥ (Y), the tap pilot hole is through, and the priority is given to the large tap effective length, so the small tap effective length becomes shorter.
[ ! ] P dimensions require M + 3 ≤ P.
| Part Number | 1 mm Increments | M (Coarse) Selection | N (Coarse) Selection | (Y) Max. | R | C | |||||||||||||||||||||||
| Type | D | L | F | P | |||||||||||||||||||||||||
| D Tolerance f8 SL-PSSFGA SH-PSSFGA D Tolerance g6 SL-SSFAA SH-SSFAA SL-PSSFAA SH-PSSFAA SL-RSFAA SH-RSFAA SL-RSSFAA SH-RSSFAA D Tolerance h5 SL-SSFUE SH-SSFUE SL-PSSFUE SH-PSSFUE [ ! ] Low Temperature Black Chrome Plated Products D ≤ 30 | 8 | 25 to 798 | 8 ≤ D ≤ 30 2 ≤ F ≤ P × 5 D ≥ 35 2 ≤ F ≤ P × 4 | 3 to 6 | 3 | 3 | 4 | 5 | 800 | 0.3 or Less | 0.5 or Less | ||||||||||||||||||
| 10 | 25 to 798 | 3 to 8 | 3 | 4 | 5 | 3 | 4 | 5 | 6 | 800 | |||||||||||||||||||
| 12 | 25 to 798 | 3 to 10 | 3 | 4 | 5 | 6 | (3) | 4 | 5 | 6 | 8 | 800 | |||||||||||||||||
| 13 | 25 to 798 | 4 to 11 | 3 | 4 | 5 | 6 | 8 | (3) | 4 | 5 | 6 | 8 | 800 | ||||||||||||||||
| 15 | 25 to 798 | 4 to 13 | 3 | 4 | 5 | 6 | 8 | 10 | (3) | 4 | 5 | 6 | 8 | 10 | 800 | ||||||||||||||
| 16 | 25 to 798 | 4 to 14 | 3 | 4 | 5 | 6 | 8 | 10 | 4 | 5 | 6 | 8 | 10 | 800 | |||||||||||||||
| 18 | 25 to 798 | 5 to 16 | 4 | 5 | 6 | 8 | 10 | 12 | 4 | 5 | 6 | 8 | 10 | 12 | 800 | ||||||||||||||
| 20 | 25 to 798 | 5 to 17 | 4 | 5 | 6 | 8 | 10 | 12 | 4 | 5 | 6 | 8 | 10 | 12 | 800 | 1.0 or Less | |||||||||||||
| 25 | 25 to 798 | 6 to 22 | 4 | 5 | 6 | 8 | 10 | 12 | 16 | 4 | 5 | 6 | 8 | 10 | 12 | 16 | 800 | ||||||||||||
| 30 | 25 to 798 | 8 to 27 | 5 | 6 | 8 | 10 | 12 | 16 | 20 | 24 | 6 | 8 | 10 | 12 | 16 | 20 | 800 | ||||||||||||
| 35 | 25 to 798 | 9 to 32 | 5 | 6 | 8 | 10 | 12 | 16 | 20 | 24 | 8 | 10 | 12 | 16 | 20 | 24 | 800 | 0.5 or Less | |||||||||||
| 40 | 25 to 798 | 11 to 37 | 6 | 8 | 10 | 12 | 16 | 20 | 24 | 30 | 10 | 12 | 16 | 20 | 24 | 30 | 800 | ||||||||||||
| 50 | 25 to 798 | 11 to 47 | 6 | 8 | 10 | 12 | 16 | 20 | 24 | 30 | 12 | 16 | 20 | 24 | 30 | 800 | |||||||||||||
[ ! ] When M × 2.5 + 4 + N × 2.5 + 4 ≥ (Y), the tap pilot hole is through, and the priority is given to the large tap effective length, so the small tap effective length becomes shorter.
[ ! ] P dimensions require M + 3 ≤ P.
■ One End Stepped, One End Tapped Type
[ ! ] N ( ) dimension is only available for D Tolerance g6. [ ! ] Overall length (Y) requires M × 2+N × 2 ≥ (Y).
[ ! ] When M × 2.5 + 4 + N × 2.5 + 4 ≥ (Y), the tap pilot hole is through, and the priority is given to the large tap effective length, so the small tap effective length becomes shorter.
[ ! ] The L dimension requires N × 3 ≤ L.
| Part Number | 1 mm Increments | N (Coarse) Selection | (Y) Max. | R | C | |||||||||||||
| Type | D | L | F | P | ||||||||||||||
| D Tolerance f8 SL-PSSFGA SH-PSSFGA D Tolerance g6 SL-SSFNA SH-SSFNA SL-PSSFNA SH-PSSFNA SL-RSFNA SH-RSFNA SL-RSSFNA SH-RSSFNA D Tolerance h5 SL-SSFEU SH-SSFEU SL-PSSFEU SH-PSSFEU [ ! ] Low Temperature Black Chrome Plated Products D ≤ 30 | 8 | 25 to 798 | 8 ≤ D ≤ 30 2 ≤ F ≤ P × 5 D ≥ 35 2 ≤ F ≤ P × 4 | 3 to 6 | 3 | 4 | 5 | 800 | 0.3 or Less | 0.5 or Less | ||||||||
| 10 | 25 to 798 | 3 to 8 | 3 | 4 | 5 | 6 | 800 | |||||||||||
| 12 | 25 to 798 | 3 to 10 | (3) | 4 | 5 | 6 | 8 | 800 | ||||||||||
| 13 | 25 to 798 | 4 to 11 | (3) | 4 | 5 | 6 | 8 | 800 | ||||||||||
| 15 | 25 to 798 | 4 to 13 | (3) | 4 | 5 | 6 | 8 | 10 | 800 | |||||||||
| 16 | 25 to 798 | 4 to 14 | 4 | 5 | 6 | 8 | 10 | 800 | ||||||||||
| 18 | 25 to 798 | 5 to 16 | 4 | 5 | 6 | 8 | 10 | 12 | 800 | |||||||||
| 20 | 25 to 798 | 5 to 17 | 4 | 5 | 6 | 8 | 10 | 12 | 800 | 1.0 or Less | ||||||||
| 25 | 25 to 798 | 6 to 22 | 4 | 5 | 6 | 8 | 10 | 12 | 16 | 800 | ||||||||
| 30 | 25 to 798 | 8 to 27 | 6 | 8 | 10 | 12 | 16 | 20 | 800 | |||||||||
| 35 | 25 to 798 | 9 to 32 | 8 | 10 | 12 | 16 | 20 | 24 | 800 | 0.5 or Less | ||||||||
| 40 | 25 to 798 | 11 to 37 | 10 | 12 | 16 | 20 | 24 | 30 | 800 | |||||||||
| 50 | 25 to 798 | 11 to 47 | 12 | 16 | 20 | 24 | 30 | 800 | ||||||||||
[ ! ] When M × 2.5 + 4 + N × 2.5 + 4 ≥ (Y), the tap pilot hole is through, and the priority is given to the large tap effective length, so the small tap effective length becomes shorter.
[ ! ] The L dimension requires N × 3 ≤ L.
Alteration Details
· See the tab below for alteration details.
*When selecting multiple alterations, the distance between machined areas should be 2 mm or more.
*Alteration may lower hardness.
| Alterations Code | Alteration Details | Fixed Dimension | Applicable Conditions | Ordering Example | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| LKC | Precisely change L dimension and tolerance | · L < 200 >> L ± 0.03 · 200 ≤ L < 500 >> L ± 0.05 · L ≥ 500 >> L ± 0.1 | [ ! ] L Dimension can be specified in 0.1 mm increments | SL-PSSFGA30-400.5-F25-P16-M10-N10-LKC | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| WSC | Wrench Flats at Two Locations |
| [ ! ] Applicable to D = 6 or more [ ! ] WSC, X = 1 mm increment [ ! ] WSC + X + ℓ1 × 2 [ ! ] WSC (X) ≥ 0 [ NG ]Cannot be machined coplanarly | SL-PSSFGA30-400-F25-P16-M10-N10-WSC12-X8 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| FC | Set Screw Flat at One Location |
| [ ! ] FC, E = 1 mm increment [ ! ] D ≤ 30: FC ≤ 5 × D, D ≥ 35: FC ≤ 3 × D [ ! ] E = 0 or E ≥ 2 [ NG ] Not available in combination with WFC | SL-PSSFGA30-400-F25-P16-M10-N10-FC10-E8 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| WFC | Set Screw Flats at Two Locations |
| [ ! ] WFC, A, E = 1 mm increment [ ! ] D ≤ 30: WFC ≤ 5 × D, D ≥ 35: WFC ≤ 3 × D [ ! ] A(E) = 0 or A(E) ≥ 2 [ NG ]Cannot be machined coplanarly [ NG ]Not available in combination with FC | SL-PSSFGA30-400-F25-P16-M10-N10-WFC10-A8-E20 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| RC | 90-Deg. Set Screw Flat at One Location |
| [ ! ] Applicable to D = 10 to 30 [ ! ] RC = 1 mm increment [ ! ] RC + b1 ≤ L [ ! ] RC ≥ 2 [ NG ] Not available in combination with WRC | SL-PSSFGA30-400-F25-P16-M10-N10-RC10 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| WRC | 90-deg. Set Screw Flats at Two Locations |
| [ ! ] Applicable to D = 10 to 30 [ ! ] WRC = 1 mm increment [ ! ] WRC + b1 ≤ L [ ! ] WRC (Y) ≥ 2 [ NG ]Cannot be machined coplanarly [ NG ]Not available in combination with RC | SL-PSSFGA30-400-F25-P16-M10-N10-WRC10-Y10 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| NSC | Change Tapped Thread to Fine Thread |
| [ ! ] Applicable to D = 12 or more [ NG ]Not available in combination with ND | SL-PSSFGA30-400-F25-P16-M10-NSC14 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| MD ND | Changes the effective length of tapped part to M (N) × 3 | - | [ ! ] Applicable to D = 10 to 30 and M (N) = 6 to 20 [ ! ] One End Tapped: MD × 3.5+4 ≤ L [ ! ] Both Ends Tapped: MD × 3.5+4+ND × 3.5+4 ≤ L [ NG ]Not available in combination with NSC | SL-PSSFGA30-400-F25-P16-MD6-ND6 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
| LFC | Set Screw Flat on Step |
| [ ! ] LFC ≤ F [ ! ] D - M ≥ 1 | SL-PSSFGA30-400-F25-P16-M10-N10-LFC10-A0 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||
Cleaning Process
* Stainless steel products may be used with alkaline hot pure water. There is no change in cleanliness.
* If the surface treatment is low-temperature black chrome plating, IPA cleaning will be applied.
Working Environment: General environment | ||||||
|---|---|---|---|---|---|---|
 Hydrocarbon cleaning Ro water cleaning Neutral Detergent Cleaning |  |  High-pressure jet washing (Ro water) followed by pure water cleaning | |  Oil-free Compressor Used | |  Anti-rust single packing |
· Precision cleaning (Part Number: SH-□□)
Working Environment: Class 1,000 | Working Environment: Class 10 | |||||||
|---|---|---|---|---|---|---|---|---|
Hydrocarbon cleaning Ro water cleaning Neutral Detergent Cleaning | | High-pressure jet washing (Ro water) followed by pure water (10 MΩ·cm) cleaning | |  Use pure water (13 MΩ·cm) | | Use nitrogen blow | |  Conducted on a clean bench in a Class 10 clean environment |
· Electrolytic polishing + precision cleaning (Part Number: SHD-□□)
Working Environment: Class 1,000 | Working Environment: Class 10 | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Hydrocarbon cleaning Ro water cleaning Neutral Detergent Cleaning | |  Electrolytic polishing with an electrolytic polishing layer according to the material | | High-pressure jet washing (Ro water) followed by pure water (10 MΩ·cm) cleaning | | Use warm pure water (13 MΩ·cm) | | Use nitrogen blow | | Conducted on a clean bench in a Class 10 clean environment |
Packaging Example| For degreasing: (Part Number: SL-□□) | For precision cleaning or electrolytic polishing + precision cleaning: | |
| (Part Number: SH-□□/SHD-□□) | ||
| For austenitic stainless steel and aluminum materials | For iron and martensitic stainless steel materials | |
 |  |  |
| Depending on some products and sizes, packaging type may vary. | [ ! ] Both the first and second layer packaging are degassed. | [ ! ] A desiccant is included as an anti-rust measure. There is one desiccant per package. |
Cleaning Effectiveness / Recommended Environment for UseCleaning Method | Product Part Number | Packaging Type | Effects Compared to Uncleaned Product | Environment (Standard) | Use Case and Process |
|---|---|---|---|---|---|
| Degreasing | SL-□□ | Anti-rust packing | Oil removal | General environment | Regular assembly process |
| Post battery assembly process | |||||
| Precision cleaning | SH-□□ | Degassing double packing | Oil removal Dust removal | Clean environment (Class 10 to 1,000) | Battery assembly process |
| LCD-related post assembly process | |||||
| In-vehicle camera assembly process | |||||
| Electrolytic polishing + precision cleaning | SHD-□□ | Degassing double packing | Oil removal Dust removal Outgas reduction | Vacuum environment Clean environment (Class 10 to 1,000) | Pre-semiconductor process |
| Liquid crystal deposition process | |||||
| Pre-OLED process |
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| SH-PSSFGA8-[25-800/1]-F[2-24/1]-P6-M3-N[3,4,5] |
| SH-PSSFGA10-[25-800/1]-F[2-32/1]-P[6-8/1]-M[3,4,5]-N[3,4,5,6] |
| SH-PSSFGA12-[25-800/1]-F[2-40/1]-P[6-10/1]-M[3,4,5,6]-N[4,5,6,8] |
| SH-PSSFGA12-[25-800/1]-F[2-40/1]-P[6-10/1]-M[3,4,5,6]-ND6 |
| SH-PSSFGA12-[25-800/1]-F[2-40/1]-P[6-10/1]-M[3,4,5,6]-NSC8 |
| SH-PSSFGA12-[25-800/1]-F[2-40/1]-P[6-10/1]-MD6-N[4,5,6,8] |
| SH-PSSFGA12-[25-800/1]-F[2-40/1]-P[6-10/1]-MD6-ND6 |
| SH-PSSFGA12-[25-800/1]-F[2-40/1]-P[6-10/1]-MD6-NSC8 |
| SH-PSSFGA13-[25-800/1]-F[2-44/1]-P[6-11/1]-M[3,4,5,6,8]-N[4,5,6,8] |
| SH-PSSFGA13-[25-800/1]-F[2-44/1]-P[6-11/1]-M[3,4,5,6,8]-ND[6,8] |
| SH-PSSFGA13-[25-800/1]-F[2-44/1]-P[6-11/1]-M[3,4,5,6,8]-NSC8 |
| SH-PSSFGA13-[25-800/1]-F[2-44/1]-P[6-11/1]-MD[6,8]-N[4,5,6,8] |
| SH-PSSFGA13-[25-800/1]-F[2-44/1]-P[6-11/1]-MD[6,8]-ND[6,8] |
| SH-PSSFGA13-[25-800/1]-F[2-44/1]-P[6-11/1]-MD[6,8]-NSC8 |
| SH-PSSFGA15-[25-800/1]-F[2-52/1]-P[6-13/1]-M[3,4,5,6,8,10]-N[4,5,6,8,10] |
| SH-PSSFGA15-[25-800/1]-F[2-52/1]-P[6-13/1]-M[3,4,5,6,8,10]-ND[6,8,10] |
| SH-PSSFGA15-[25-800/1]-F[2-52/1]-P[6-13/1]-M[3,4,5,6,8,10]-NSC[8,10] |
| SH-PSSFGA15-[25-800/1]-F[2-52/1]-P[6-13/1]-MD[6,8,10]-N[4,5,6,8,10] |
| SH-PSSFGA15-[25-800/1]-F[2-52/1]-P[6-13/1]-MD[6,8,10]-ND[6,8,10] |
| SH-PSSFGA15-[25-800/1]-F[2-52/1]-P[6-13/1]-MD[6,8,10]-NSC[8,10] |
| SH-PSSFGA16-[25-800/1]-F[2-56/1]-P[6-14/1]-M[3,4,5,6,8,10]-N[4,5,6,8,10] |
| SH-PSSFGA16-[25-800/1]-F[2-56/1]-P[6-14/1]-M[3,4,5,6,8,10]-ND[6,8,10] |
| SH-PSSFGA16-[25-800/1]-F[2-56/1]-P[6-14/1]-M[3,4,5,6,8,10]-NSC[8,10] |
| SH-PSSFGA16-[25-800/1]-F[2-56/1]-P[6-14/1]-MD[6,8,10]-N[4,5,6,8,10] |
| SH-PSSFGA16-[25-800/1]-F[2-56/1]-P[6-14/1]-MD[6,8,10]-ND[6,8,10] |
| SH-PSSFGA16-[25-800/1]-F[2-56/1]-P[6-14/1]-MD[6,8,10]-NSC[8,10] |
| SH-PSSFGA18-[25-800/1]-F[2-56/1]-P[7-14/1]-M[3,4,5,6,8,10]-N[4,5,6,8,10,12] |
| SH-PSSFGA18-[25-800/1]-F[2-56/1]-P[7-14/1]-M[3,4,5,6,8,10]-ND[6,8,10,12] |
| SH-PSSFGA18-[25-800/1]-F[2-56/1]-P[7-14/1]-M[3,4,5,6,8,10]-NSC[8,10,12] |
| SH-PSSFGA18-[25-800/1]-F[2-56/1]-P[7-14/1]-MD[6,8,10,12]-N[4,5,6,8,10,12] |
| SH-PSSFGA18-[25-800/1]-F[2-56/1]-P[7-14/1]-MD[6,8,10,12]-ND[6,8,10,12] |
| SH-PSSFGA18-[25-800/1]-F[2-56/1]-P[7-14/1]-MD[6,8,10,12]-NSC[8,10,12] |
| SH-PSSFGA20-[25-800/1]-F[2-68/1]-P[7-17/1]-M[4,5,6,8,10,12]-N[4,5,6,8,10,12] |
| SH-PSSFGA20-[25-800/1]-F[2-68/1]-P[7-17/1]-M[4,5,6,8,10,12]-ND[6,8,10,12] |
| SH-PSSFGA20-[25-800/1]-F[2-68/1]-P[7-17/1]-M[4,5,6,8,10,12]-NSC[8,10,12,14] |
| SH-PSSFGA20-[25-800/1]-F[2-68/1]-P[7-17/1]-MD[6,8,10,12]-N[4,5,6,8,10,12] |
| SH-PSSFGA20-[25-800/1]-F[2-68/1]-P[7-17/1]-MD[6,8,10,12]-ND[6,8,10,12] |
| SH-PSSFGA20-[25-800/1]-F[2-68/1]-P[7-17/1]-MD[6,8,10,12]-NSC[8,10,12,14] |
| SH-PSSFGA25-[25-800/1]-F[2-88/1]-P[7-22/1]-M[4,5,6,8,10,12,16]-N[4,5,6,8,10,12,16] |
| SH-PSSFGA25-[25-800/1]-F[2-88/1]-P[7-22/1]-M[4,5,6,8,10,12,16]-ND[6,8,10,12,16] |
| SH-PSSFGA25-[25-800/1]-F[2-88/1]-P[7-22/1]-M[4,5,6,8,10,12,16]-NSC[8,10,12,14,18] |
| SH-PSSFGA25-[25-800/1]-F[2-88/1]-P[7-22/1]-MD[6,8,10,12,16]-N[4,5,6,8,10,12,16] |
| SH-PSSFGA25-[25-800/1]-F[2-88/1]-P[7-22/1]-MD[6,8,10,12,16]-ND[6,8,10,12,16] |
| SH-PSSFGA25-[25-800/1]-F[2-88/1]-P[7-22/1]-MD[6,8,10,12,16]-NSC[8,10,12,14,18] |
| SH-PSSFGA30-[25-800/1]-F[2-108/1]-P[8-27/1]-M[5,6,8,10,12,16,20,24]-N[6,8,10,12,16,20] |
| SH-PSSFGA30-[25-800/1]-F[2-108/1]-P[8-27/1]-M[5,6,8,10,12,16,20,24]-ND[6,8,10,12,16,20] |
| SH-PSSFGA30-[25-800/1]-F[2-108/1]-P[8-27/1]-M[5,6,8,10,12,16,20,24]-NSC[8,10,12,14,18] |
| SH-PSSFGA30-[25-800/1]-F[2-108/1]-P[8-27/1]-MD[6,8,10,12,16,20]-N[6,8,10,12,16,20] |
| SH-PSSFGA30-[25-800/1]-F[2-108/1]-P[8-27/1]-MD[6,8,10,12,16,20]-ND[6,8,10,12,16,20] |
| SH-PSSFGA30-[25-800/1]-F[2-108/1]-P[8-27/1]-MD[6,8,10,12,16,20]-NSC[8,10,12,14,18] |
| SH-PSSFGA35-[25-800/1]-F[2-128/1]-P[9-32/1]-M[5,6,8,10,12,16,20,24]-N[8,10,12,16,20,24] |
| SH-PSSFGA35-[25-800/1]-F[2-128/1]-P[9-32/1]-M[5,6,8,10,12,16,20,24]-NSC[8,10,12,14,18] |
| SH-PSSFGA40-[25-800/1]-F[2-148/1]-P[11-37/1]-M[6,8,10,12,16,20,24,30]-N[10,12,16,20,24,30] |
| SH-PSSFGA40-[25-800/1]-F[2-148/1]-P[11-37/1]-M[6,8,10,12,16,20,24,30]-NSC[8,10,12,14,18] |
| SH-PSSFGA50-[25-800/1]-F[2-188/1]-P[11-47/1]-M[6,8,10,12,16,20,24,30]-N[12,16,20,24,30] |
| SH-PSSFGA50-[25-800/1]-F[2-188/1]-P[11-47/1]-M[6,8,10,12,16,20,24,30]-NSC[12,14,18] |
| SH-PSSNGA8-[25-800/1]-F[2-24/1]-P[3-6/1]-N[3,4,5] |
| SH-PSSNGA10-[25-800/1]-F[2-32/1]-P[3-8/1]-N[3,4,5,6] |
| SH-PSSNGA12-[25-800/1]-F[2-40/1]-P[3-10/1]-N[4,5,6,8] |
| SH-PSSNGA12-[25-800/1]-F[2-40/1]-P[3-10/1]-ND6 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | End Shape (Left) | Shaft Dia. D (Ø) | Length L (mm) | Cleaning Method | Tapped (Coarse (mm) | Change Tapped Thread N to Fine Thread [NSC] (mm) | P (㎜) | Change Tapped Thread N to Fine Thread [NSC] (㎜) | Tapped (Coarse (㎜) | F (㎜) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | 6 Day(s) or more | Tapped | 8 | 25 ～ 800 | Precision Cleaning | - | - | 6 | - | 3 ～ 5 | 2 ～ 24 | ||
- | 1 Piece(s) | 6 Day(s) or more | Tapped | 10 | 25 ～ 800 | Precision Cleaning | - | - | 6 ～ 8 | - | 3 ～ 6 | 2 ～ 32 | ||
- | 1 Piece(s) | 6 Day(s) or more | Tapped | 12 | 25 ～ 800 | Precision Cleaning | - | - | 6 ～ 10 | - | 3 ～ 8 | 2 ～ 40 | ||
- | 1 Piece(s) | 6 Day(s) or more | Tapped | 12 | 25 ～ 800 | Precision Cleaning | - | - | 6 ～ 10 | - | 3 ～ 6 | 2 ～ 40 | ||
- | 1 Piece(s) | 6 Day(s) or more | Tapped | 12 | 25 ～ 800 | Precision Cleaning | - | - | 6 ～ 10 | 8 | 3 ～ 6 | 2 ～ 40 | ||
- | 1 Piece(s) | 6 Day(s) or more | Tapped | 12 | 25 ～ 800 | Precision Cleaning | - | - | 6 ～ 10 | - | 4 ～ 8 | 2 ～ 40 | ||
- | 1 Piece(s) | 6 Day(s) or more | Tapped | 12 | 25 ～ 800 | Precision Cleaning | - | - | 6 ～ 10 | - | 6 | 2 ～ 40 | ||
- | 1 Piece(s) | 6 Day(s) or more | Tapped | 12 | 25 ～ 800 | Precision Cleaning | - | - | 6 ～ 10 | 8 | 6 | 2 ～ 40 | ||
- | 1 Piece(s) | 6 Day(s) or more | Tapped | 13 | 25 ～ 800 | Precision Cleaning | - | - | 6 ～ 11 | - | 3 ～ 8 | 2 ～ 44 | ||
- | 1 Piece(s) | 6 Day(s) or more | Tapped | 13 | 25 ～ 800 | Precision Cleaning | - | - | 6 ～ 11 | - | 3 ～ 8 | 2 ～ 44 | ||
- | 1 Piece(s) | 6 Day(s) or more | Tapped | 13 | 25 ～ 800 | Precision Cleaning | - | - | 6 ～ 11 | 8 | 3 ～ 8 | 2 ～ 44 | ||
- | 1 Piece(s) | 6 Day(s) or more | Tapped | 13 | 25 ～ 800 | Precision Cleaning | - | - | 6 ～ 11 | - | 4 ～ 8 | 2 ～ 44 | ||
- | 1 Piece(s) | 6 Day(s) or more | Tapped | 13 | 25 ～ 800 | Precision Cleaning | - | - | 6 ～ 11 | - | 6 ～ 8 | 2 ～ 44 | ||
- | 1 Piece(s) | 6 Day(s) or more | Tapped | 13 | 25 ～ 800 | Precision Cleaning | - | - | 6 ～ 11 | 8 | 6 ～ 8 | 2 ～ 44 | ||
- | 1 Piece(s) | 6 Day(s) or more | Tapped | 15 | 25 ～ 800 | Precision Cleaning | - | - | 6 ～ 13 | - | 3 ～ 10 | 2 ～ 52 | ||
- | 1 Piece(s) | 6 Day(s) or more | Tapped | 15 | 25 ～ 800 | Precision Cleaning | - | - | 6 ～ 13 | - | 3 ～ 10 | 2 ～ 52 | ||
- | 1 Piece(s) | 6 Day(s) or more | Tapped | 15 | 25 ～ 800 | Precision Cleaning | - | - | 6 ～ 13 | 8 ～ 10 | 3 ～ 10 | 2 ～ 52 | ||
- | 1 Piece(s) | 6 Day(s) or more | Tapped | 15 | 25 ～ 800 | Precision Cleaning | - | - | 6 ～ 13 | - | 4 ～ 10 | 2 ～ 52 | ||
- | 1 Piece(s) | 6 Day(s) or more | Tapped | 15 | 25 ～ 800 | Precision Cleaning | - | - | 6 ～ 13 | - | 6 ～ 10 | 2 ～ 52 | ||
- | 1 Piece(s) | 6 Day(s) or more | Tapped | 15 | 25 ～ 800 | Precision Cleaning | - | - | 6 ～ 13 | 8 ～ 10 | 6 ～ 10 | 2 ～ 52 | ||
- | 1 Piece(s) | 6 Day(s) or more | Tapped | 16 | 25 ～ 800 | Precision Cleaning | - | - | 6 ～ 14 | - | 3 ～ 10 | 2 ～ 56 | ||
- | 1 Piece(s) | 6 Day(s) or more | Tapped | 16 | 25 ～ 800 | Precision Cleaning | - | - | 6 ～ 14 | - | 3 ～ 10 | 2 ～ 56 | ||
- | 1 Piece(s) | 6 Day(s) or more | Tapped | 16 | 25 ～ 800 | Precision Cleaning | - | - | 6 ～ 14 | 8 ～ 10 | 3 ～ 10 | 2 ～ 56 | ||
- | 1 Piece(s) | 6 Day(s) or more | Tapped | 16 | 25 ～ 800 | Precision Cleaning | - | - | 6 ～ 14 | - | 4 ～ 10 | 2 ～ 56 | ||
- | 1 Piece(s) | 6 Day(s) or more | Tapped | 16 | 25 ～ 800 | Precision Cleaning | - | - | 6 ～ 14 | - | 6 ～ 10 | 2 ～ 56 | ||
- | 1 Piece(s) | 6 Day(s) or more | Tapped | 16 | 25 ～ 800 | Precision Cleaning | - | - | 6 ～ 14 | 8 ～ 10 | 6 ～ 10 | 2 ～ 56 | ||
- | 1 Piece(s) | 6 Day(s) or more | Tapped | 18 | 25 ～ 800 | Precision Cleaning | - | - | 7 ～ 14 | - | 3 ～ 12 | 2 ～ 56 | ||
- | 1 Piece(s) | 6 Day(s) or more | Tapped | 18 | 25 ～ 800 | Precision Cleaning | - | - | 7 ～ 14 | - | 3 ～ 12 | 2 ～ 56 | ||
- | 1 Piece(s) | 6 Day(s) or more | Tapped | 18 | 25 ～ 800 | Precision Cleaning | - | - | 7 ～ 14 | 8 ～ 12 | 3 ～ 10 | 2 ～ 56 | ||
- | 1 Piece(s) | 6 Day(s) or more | Tapped | 18 | 25 ～ 800 | Precision Cleaning | - | - | 7 ～ 14 | - | 4 ～ 12 | 2 ～ 56 | ||
- | 1 Piece(s) | 6 Day(s) or more | Tapped | 18 | 25 ～ 800 | Precision Cleaning | - | - | 7 ～ 14 | - | 6 ～ 12 | 2 ～ 56 | ||
- | 1 Piece(s) | 6 Day(s) or more | Tapped | 18 | 25 ～ 800 | Precision Cleaning | - | - | 7 ～ 14 | 8 ～ 12 | 6 ～ 12 | 2 ～ 56 | ||
- | 1 Piece(s) | 6 Day(s) or more | Tapped | 20 | 25 ～ 800 | Precision Cleaning | - | - | 7 ～ 17 | - | 4 ～ 12 | 2 ～ 68 | ||
- | 1 Piece(s) | 6 Day(s) or more | Tapped | 20 | 25 ～ 800 | Precision Cleaning | - | - | 7 ～ 17 | - | 4 ～ 12 | 2 ～ 68 | ||
- | 1 Piece(s) | 6 Day(s) or more | Tapped | 20 | 25 ～ 800 | Precision Cleaning | - | - | 7 ～ 17 | 8 ～ 14 | 4 ～ 12 | 2 ～ 68 | ||
- | 1 Piece(s) | 6 Day(s) or more | Tapped | 20 | 25 ～ 800 | Precision Cleaning | - | - | 7 ～ 17 | - | 4 ～ 12 | 2 ～ 68 | ||
- | 1 Piece(s) | 6 Day(s) or more | Tapped | 20 | 25 ～ 800 | Precision Cleaning | - | - | 7 ～ 17 | - | 6 ～ 12 | 2 ～ 68 | ||
- | 1 Piece(s) | 6 Day(s) or more | Tapped | 20 | 25 ～ 800 | Precision Cleaning | - | - | 7 ～ 17 | 8 ～ 14 | 6 ～ 12 | 2 ～ 68 | ||
- | 1 Piece(s) | 6 Day(s) or more | Tapped | 25 | 25 ～ 800 | Precision Cleaning | - | - | 7 ～ 22 | - | 4 ～ 16 | 2 ～ 88 | ||
- | 1 Piece(s) | 6 Day(s) or more | Tapped | 25 | 25 ～ 800 | Precision Cleaning | - | - | 7 ～ 22 | - | 4 ～ 16 | 2 ～ 88 | ||
- | 1 Piece(s) | 6 Day(s) or more | Tapped | 25 | 25 ～ 800 | Precision Cleaning | - | - | 7 ～ 22 | 8 ～ 18 | 4 ～ 16 | 2 ～ 88 | ||
- | 1 Piece(s) | 6 Day(s) or more | Tapped | 25 | 25 ～ 800 | Precision Cleaning | - | - | 7 ～ 22 | - | 4 ～ 16 | 2 ～ 88 | ||
- | 1 Piece(s) | 6 Day(s) or more | Tapped | 25 | 25 ～ 800 | Precision Cleaning | - | - | 7 ～ 22 | - | 6 ～ 16 | 2 ～ 88 | ||
- | 1 Piece(s) | 6 Day(s) or more | Tapped | 25 | 25 ～ 800 | Precision Cleaning | - | - | 7 ～ 22 | 8 ～ 18 | 6 ～ 16 | 2 ～ 88 | ||
- | 1 Piece(s) | 6 Day(s) or more | Tapped | 30 | 25 ～ 800 | Precision Cleaning | - | - | 8 ～ 27 | - | 5 ～ 24 | 2 ～ 108 | ||
- | 1 Piece(s) | 6 Day(s) or more | Tapped | 30 | 25 ～ 800 | Precision Cleaning | - | - | 8 ～ 27 | - | 5 ～ 24 | 2 ～ 108 | ||
- | 1 Piece(s) | 6 Day(s) or more | Tapped | 30 | 25 ～ 800 | Precision Cleaning | - | - | 8 ～ 27 | 8 ～ 18 | 5 ～ 24 | 2 ～ 108 | ||
- | 1 Piece(s) | 6 Day(s) or more | Tapped | 30 | 25 ～ 800 | Precision Cleaning | - | - | 8 ～ 27 | - | 6 ～ 20 | 2 ～ 108 | ||
- | 1 Piece(s) | 6 Day(s) or more | Tapped | 30 | 25 ～ 800 | Precision Cleaning | - | - | 8 ～ 27 | - | 6 ～ 20 | 2 ～ 108 | ||
- | 1 Piece(s) | 6 Day(s) or more | Tapped | 30 | 25 ～ 800 | Precision Cleaning | - | - | 8 ～ 27 | 8 ～ 18 | 6 ～ 20 | 2 ～ 108 | ||
- | 1 Piece(s) | 6 Day(s) or more | Tapped | 35 | 25 ～ 800 | Precision Cleaning | - | - | 9 ～ 32 | - | 5 ～ 24 | 2 ～ 128 | ||
- | 1 Piece(s) | 6 Day(s) or more | Tapped | 35 | 25 ～ 800 | Precision Cleaning | - | - | 9 ～ 32 | 8 ～ 18 | 5 ～ 24 | 2 ～ 128 | ||
- | 1 Piece(s) | 6 Day(s) or more | Tapped | 40 | 25 ～ 800 | Precision Cleaning | - | - | 11 ～ 37 | - | 6 ～ 30 | 2 ～ 148 | ||
- | 1 Piece(s) | 6 Day(s) or more | Tapped | 40 | 25 ～ 800 | Precision Cleaning | - | - | 11 ～ 37 | 8 ～ 18 | 6 ～ 30 | 2 ～ 148 | ||
- | 1 Piece(s) | 6 Day(s) or more | Tapped | 50 | 25 ～ 800 | Precision Cleaning | - | - | 11 ～ 47 | - | 6 ～ 30 | 2 ～ 188 | ||
- | 1 Piece(s) | 6 Day(s) or more | Tapped | 50 | 25 ～ 800 | Precision Cleaning | - | - | 11 ～ 47 | 12 ～ 18 | 6 ～ 30 | 2 ～ 188 | ||
- | 1 Piece(s) | 6 Day(s) or more | No Machining | 8 | 25 ～ 800 | Precision Cleaning | 3 ～ 5 | - | 3 ～ 6 | - | - | 2 ～ 24 | ||
- | 1 Piece(s) | 6 Day(s) or more | No Machining | 10 | 25 ～ 800 | Precision Cleaning | 3 ～ 6 | - | 3 ～ 8 | - | - | 2 ～ 32 | ||
- | 1 Piece(s) | 6 Day(s) or more | No Machining | 12 | 25 ～ 800 | Precision Cleaning | 4 ～ 8 | - | 3 ～ 10 | - | - | 2 ～ 40 | ||
- | 1 Piece(s) | 6 Day(s) or more | No Machining | 12 | 25 ～ 800 | Precision Cleaning | - | - | 3 ～ 10 | - | 6 | 2 ～ 40 |
Loading...
Basic Information
| Environmentally friendly | RoHS Compliant (10 Substances) | Basic Shape | One End Stepped | Characteristics/Applications | Clean Washed |
|---|---|---|---|---|---|
| End Shape (Right) | Tapped | Shaft End Perpendicularity | Perpendicularity (0.2) | Material | SUS304 |
| Heat Treatment | Not Provided | Surface Treatment | Hard Chrome Plating | Material Details | SUS304 |
| Shaft Fit Tolerance | f8 | Hardness | Not induction hardened |
Specification/Dimensions
-
End Shape (Left)
-
No Machining -
Tapped
-
-
Shaft Dia. D(Ø)
-
Length L(mm)
-
Cleaning Method
- Degreasing
- Precision Cleaning
-
Tapped (Coarse(mm)
-
Change Tapped Thread N to Fine Thread [NSC](mm)
-
P(㎜)
-
Change Tapped Thread N to Fine Thread [NSC](㎜)
-
Tapped (Coarse(㎜)
-
F(㎜)
-
type
- SH-PSSFGA
- SH-PSSNGA
- SL-PSSFGA
- SL-PSSNGA
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 6 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Linear Shafts-Both Ends Stepped and Female Thread-
- High Precision Linear Shafts-Both Ends Tapped / Both Ends Tapped with Wrench Flats
- High Precision Linear Shafts - Both Ends Threaded / Both Ends Threaded with Wrench Flats
- Linear Shafts-Both Ends Tapped
- Linear Shafts-One End Stepped and Threaded / Both Ends Stepped and Threaded
- Shafts - Hollow Shafts
- Linear Shafts One End Tapped with Wrench Flats
- Linear Shafts Both End Threaded with Wrench Flats
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy