(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Z-Axis Manual Stages, Linear Ball Guide (E-ZSG60-CR)
- Volume Discount
Z-Axis Manual Stages are an economy item, The price is cheaper than the MISUMI standard product.They offer a wide variety of sizes to choose from.
[Feature]
● Table Dimensions (mm.) : 25X25, 40X40, 60X60 and 80X80
● Movement (mm) : ± 3.25 for 25X25, ±6.5 for 40X40, 60X60 and ±12.5 for 80X80
● Material : D2 Tool Steel
● Surface Treatment : Chemically Nickel Plating
[Application]
Z-Axis Manual Stages are commonly used in various applications in factory automation systems
Part Number
Configured Part Number is shown.
E-ZSG60-CR
There have been changes to the manual stage drawings in August 2024. Please download the latest drawings and confirm before placing your order!
■ Travel distance
The catalog drawing dimensions are based on a stroke of 0 mm. Using this as the reference, the distance moved in the vertical direction is the travel distance.
■ Load capacity
Refers to the force that the slide table can withstand when the workpiece's center of gravity is located at the center of the slide table, measured in N. If used beyond the load capacity, the slide table may not operate smoothly or may become stuck. When installing the linear motion slide table vertically or upside down, the accuracy may be less than the values indicated in the product catalog. Please take note.
■ Straightness
The maximum deviation of the slide table from the ideal movement axis (the straight line connecting the start and end points, shown as the red line in the diagram below; the black line represents the actual movement path) during full-stroke movement. Measurement method: Place a dial indicator on the slide table with the pointer touching the reference block. Move the slide table through its full stroke and measure the maximum displacement, which is the straightness.
Product Overview
The MISUMI E-ZSG series linear ball guide type stage is an economical stage. It can be used as a simple position adjustment stage. The main body is made of stainless steel, providing a certain degree of rust resistance. The guide mechanism uses a linear ball guide, which provides the necessary level of accuracy. Due to localized production in China and improved manufacturing processes, the price has been significantly reduced.
Dimensional Drawing
Material Table
| Type |  Material |  Surface treatment |
| Body | SUS440C | Electroless nickel plating |
| Z bracket | Aluminum alloy | Natural anodized |
Alterations
■ Alterations
| Alterations | Change the position of the micrometer knob | ||||
| Spec. | Left-right reversed | Side facing up | Side facing up, left-right reversed | Side facing down | |
| Code | AZR | C | CR | CU | |
Specification Table
| Type | Stage surface (mm) | Travel distance (mm) | Load capacity (N) | Straightness (µm) | Minimum reading (µm) | Weight (kg) | |
 Type |  No. | ||||||
| E-ZSG | 25 | 25 × 25 | ±3.25 | 9.8 | Within 10 | 10 | 0.09 |
| 40 | 40 × 40 | ±6.5 | 49 | 0.32 | |||
| 50 | 50X50 | 0.4 | |||||
| 60 | 60 × 60 | 0.58 | |||||
| 70 | 70 × 70 | 0.8 | |||||
| 80 | 80 × 80 | ±12.5 | 1.2 | ||||
■ Travel distance
The catalog drawing dimensions are based on a stroke of 0 mm. Using this as the reference, the distance moved in the vertical direction is the travel distance.
■ Load capacity
Refers to the force that the slide table can withstand when the workpiece's center of gravity is located at the center of the slide table, measured in N. If used beyond the load capacity, the slide table may not operate smoothly or may become stuck. When installing the linear motion slide table vertically or upside down, the accuracy may be less than the values indicated in the product catalog. Please take note.
■ Straightness
The maximum deviation of the slide table from the ideal movement axis (the straight line connecting the start and end points, shown as the red line in the diagram below; the black line represents the actual movement path) during full-stroke movement. Measurement method: Place a dial indicator on the slide table with the pointer touching the reference block. Move the slide table through its full stroke and measure the maximum displacement, which is the straightness.
Product Features
Feature 1: Shortened production lead time, with delivery in as fast as 5 days.
Feature 2: Achieves a low price by simplifying the structure and improving the manufacturing process.
Feature 3: Supports various additional machining options to meet installation requirements in different situations.
Feature 4: Improved clamping mechanism provides greater holding force for the slide table compared to the standard clamping mechanism.
Feature 2: Achieves a low price by simplifying the structure and improving the manufacturing process.
Feature 3: Supports various additional machining options to meet installation requirements in different situations.
Feature 4: Improved clamping mechanism provides greater holding force for the slide table compared to the standard clamping mechanism.
Precautions
■ Operating temperature and environment
Recommended operating environment: 10–50°C, 20–70% RH (no condensation)
Accuracy-guaranteed environment: 22±5°C, 20–70% RH (no condensation)
■ Guide mechanism
This stage uses a linear ball guide as the guiding mechanism.
■ Clamping mechanism
(1) The clamping mechanism of the stage is fixed by the friction force generated by tightening the screws. Therefore, if an external force exceeding the friction force of the clamping mechanism is applied, the stage will move. Please take appropriate measures during use to prevent the stage surface from moving. If additional clamping reinforcement is required, you can choose either disc clamping or opposed clamping.
(2) Holding force refers to the amount of force that keeps the stage surface from moving when clamped. Since the maximum holding force varies with changes in tightening torque, please ensure a sufficiently large safety factor in your design.
■ Feed Mechanism
A stage equipped with a micrometer knob, as shown in the figure below, is generally referred to as the standard type. The installation space, installation orientation, and operation method can be freely selected. However, due to the structure of the product, there are some models where the installation position of the micrometer knob cannot be changed. For details, please refer to the [Additional Machining] section at the bottom of each product page.
■ Flatness of the mounting surface
The upper and lower slide table surfaces may become deformed due to differences in the flatness of the mounting surface. Deformation of the slide table surface may result in gaps, inability to achieve the specified preload causing looseness, or excessive preload leading to poor sliding performance. Therefore, it is recommended to maintain the flatness of the mounting surface at around 5 micrometers.
Recommended operating environment: 10–50°C, 20–70% RH (no condensation)
Accuracy-guaranteed environment: 22±5°C, 20–70% RH (no condensation)
■ Guide mechanism
This stage uses a linear ball guide as the guiding mechanism.
■ Clamping mechanism
(1) The clamping mechanism of the stage is fixed by the friction force generated by tightening the screws. Therefore, if an external force exceeding the friction force of the clamping mechanism is applied, the stage will move. Please take appropriate measures during use to prevent the stage surface from moving. If additional clamping reinforcement is required, you can choose either disc clamping or opposed clamping.
(2) Holding force refers to the amount of force that keeps the stage surface from moving when clamped. Since the maximum holding force varies with changes in tightening torque, please ensure a sufficiently large safety factor in your design.
■ Feed Mechanism
A stage equipped with a micrometer knob, as shown in the figure below, is generally referred to as the standard type. The installation space, installation orientation, and operation method can be freely selected. However, due to the structure of the product, there are some models where the installation position of the micrometer knob cannot be changed. For details, please refer to the [Additional Machining] section at the bottom of each product page.
■ Flatness of the mounting surface
The upper and lower slide table surfaces may become deformed due to differences in the flatness of the mounting surface. Deformation of the slide table surface may result in gaps, inability to achieve the specified preload causing looseness, or excessive preload leading to poor sliding performance. Therefore, it is recommended to maintain the flatness of the mounting surface at around 5 micrometers.
Example of Use
Mechanism name: Sensor position adjustment for detecting poor label peeling
Application Industries
| Electronics/Home Appliances | Automotive | Medical | ||
 |  |  | ||
| Smartphones | Semiconductors | Lithium batteries | ||
 |  |  |
Related Products
| Economical Electric Slide Table X-Axis | Economical Electric Slide Table XY-Axis | Economical Electric Slide Table Z-Axis | ||
 |  |  | ||
| Representative model: C-XMBS420-L-A-2 | Representative model: C-XYMBS420-L-A-2 | Representative model: C-ZMBS420-L-A-2 | ||
| Advantage: Low cost, fast delivery | Advantage: Low cost, fast delivery | Advantage: Low cost, fast delivery |
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| E-ZSG60-CR |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Table Size (Length) L (mm) | Table Size (Width) W (mm) | Load Capacity (N) | Alteration | Travel distance (mm) |
|---|---|---|---|---|---|---|---|---|---|
MYR 737.98 | 1 Piece(s) | Available | 13 Day(s) | 60 | 60 | 49 | CR [Change knob position: side, left/right reversed] | ±6.5 |
Loading...
Basic Information
| Feeding Method | Micrometer Head + Coarse Feed Knob | Travel Guide | Linear Ball | Table Material | SUS440C |
|---|---|---|---|---|---|
| Table Surface Treatment | Electroless Nickel Plating | Z-Axis Stage Surface | Z-Axis | Through Hole (Table Center Hole) | Not Provided |
| Table Straightness(µm) | 10 |
Please check the type/dimensions/specifications of the part E-ZSG60-CR in the Z-Axis Manual Stages, Linear Ball Guide series.
Specification/Dimensions
-
type
-
Table Size (Length) L(mm)
-
Table Size (Width) W(mm)
-
Load Capacity(N)
-
Alteration
- AZR [Change knob position: center left/right and up/down reversed]
- AZR [Change knob position: center left/right or up/down reverse direction]
- C [Change knob position: side]
- CR [Change knob position: side, left/right reversed]
- CU [Change knob position: side, down]
- Standard Type
-
Travel distance(mm)
- ±3.25
- ±6.5
- ±12.5
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 1 Day(s) or Less
- 13 Day(s) or Less
- 16 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Frequently asked question (FAQ)
- Question: What does a micrometer knob-type positioning stage with a travel distance of ±XX mean?
- Answer: The travel ±XXmm means how many millimeters can be moved in each direction, left and right or up and down, with the middle of the full travel of the micrometer knob as the base point.
- Question: What is the reset method of the micrometer knob type manual positioning stage? What should be paid attention to in use?
- Answer: The micrometer knob type manual positioning stage is reset by means of an extension spring. If the applied load is greater than the spring load, the positioning stage surface may not reset properly or the spring may be damaged directly, so take care when using it.
- Question: Can the positioning stage be mounted vertically? What should be paid attention to?
- Answer: Yes, it can. However, attention should be paid that the load capacity is about 1/3 of that for horizontal installation; and that the feed direction should not be the same as gravity direction, because if the applied force is greater than the spring load, the positioning stage surface may not be able to support the weight and may fall.
- Question: Can manual positioning stage products be used upside down?
- Answer: All except dovetail products. Dovetail products are strictly forbidden to be used upside down.
- Question: Is it possible to freely assemble the XY type positioning stage without the dimension or travel I want?
- Answer: Yes, it is.
Products like this...
| Part Number |
|---|
| E-ZSG25-CR |
| E-ZSG25-CU |
| E-ZSG40 |
| E-ZSG60-CU |
| E-ZSG70 |
| E-ZSG70-AZR |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Table Size (Length) L (mm) | Table Size (Width) W (mm) | Load Capacity (N) | Alteration | Travel distance (mm) |
|---|---|---|---|---|---|---|---|---|---|
MYR 579.20 | 1 Piece(s) | Available | 13 Day(s) | 25 | 25 | 9.8 | CR [Change knob position: side, left/right reversed] | ±3.25 | |
MYR 579.20 | 1 Piece(s) | Available | 13 Day(s) | 25 | 25 | 9.8 | CU [Change knob position: side, down] | ±3.25 | |
MYR 640.72 | 1 Piece(s) | Available | 1 Day(s) | 40 | 40 | 49 | Standard Type | ±6.5 | |
MYR 737.98 | 1 Piece(s) | Available | 13 Day(s) | 60 | 60 | 49 | CU [Change knob position: side, down] | ±6.5 | |
MYR 649.04 | 1 Piece(s) | 16 Day(s) | 70 | 70 | 49 | Standard Type | ±6.5 | ||
MYR 649.04 | 1 Piece(s) | 16 Day(s) | 70 | 70 | 49 | AZR [Change knob position: center left/right or up/down reverse direction] | ±6.5 |
Additional Products in this Category
- [High Precision] Z-Axis Dovetail Slide, Feed Screw - Hex Wrench Drive
- [High Precision] Dovetail Slide, Rack & Pinion - Rectangular, Reinforced Clamp
- Z-Axis Cross Roller Guide Stage
- Horizontal Z-Axis Dovetail Stage (B06/B07/BDBHR)
- Precision Lab Jack TLJK
- Z-Axis Linear Ball Guide Stage BZT Series
- Semi-Order Stage (Handle Extension Type, Z-Axis)
- Dovetail Slide Stage ZMA Series Rectangular Type
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy