(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Linear Guides Standard Block-Low Profile
- Volume Discount
MiSUMi Economy
Linear Guides Standard Block-Low Profile
These linear guides or linear slides are an economy item, The price is cheaper than the MISUMI standard product.They offer a wide variety of sizes to choose from.
[Feature]
● Rail Length Minimum/Maximum (mm.): 160 and 520
● Assembly Height (mm.): 24, 28, 33, and 42
● Option: Set (Rail + Block) / Block only
● Material: Carbon Steel
[Application]
It is used in a variety of machines such as CNC machines, 3D printers, measuring instruments, and so on.
- RoHS
(i)Caution
- Please expect longer LT for length exceeding 2.8m or alteration is ZA or ZB.
Part Number
Configured Part Number is shown.
Economy Standard Block Low Profile Linear Guide
Linear MotionPrecisionEconomical
- Wide range of sizes available
- Multiple assembly heights available
- Material: Carbon Steel for durability
- Set and Block only options available
- Cost-effective compared to standard products
MISUMI Standard
Cheaper Price
Product Variety
3D CAD Support
Product Overview
Linear Guides, also known as slide rail or linear slide, which is used for linear reciprocating motion, has higher rated load and linear motion precision than linear bearings under the same moving component volume. Also, it bears a certain torque load, achieving high-precision linear motion under high load.Used to support and guide moving parts, Linear Guides make reciprocating linear motion in a specified direction. It is mainly used in mechanical structures with high precision requirements. Rolling steel balls are used instead of intermediate medium between the moving element and the fixed element of the linear guide rail.
Dimensional Drawing
Operating Temperature: -20 to 80°CSince this product of Linear Guides has no surface treatment, please be sure to take anti-rust measures.The dimensional tolerance of Length L is ±2 mm.The kit includes 1 block. For additional blocks, please purchase a single block model.| Type | Component Kit/Single Block |  Material |  Hardness |
| C-ELG | Component Kit | Carbon steel | 58HRC～ |
| C-ELGB | Slider Blick |
Optional heights and lengths are the overall range of this series. Refer to the Specification Table for details.Specification Table
■ Component Kit| Part Number |  Length L（Increments 1mm） | Guide Rail Dimension (mm) | Block Dimension (mm) | |||||||||||||||||||||
 Type |  Nominal Number | W | B | B1 | L1 | L2 | C | M×ℓ | T | H2 | K1 | K2 | G | WR | N | H | H1 | HR | Countersunk d × D × h | P | E | |||
| C-ELG | 15 | 100～3960 | 34 | 26 | 4 | 39.8 | 59.3 | 26 | M4×6 | 6 | 5.6 | 10.3 | 3.5 | 5 | 15 | 9.5 | 24 | 4.5 | 12.5 | 4.5×7.5×5.3 | 60 | Please refer to the calculation table below | ||
| 20 | 42 | 32 | 5 | 48.1 | 71.2 | 32 | M5×7 | 7.5 | 6 | 12.3 | 4.15 | 12.5 | 20 | 11 | 28 | 6 | 15.5 | 6 ×9.5 × 8.5 | ||||||
| 25 | 48 | 35 | 6.5 | 59 | 87.5 | 35 | M6×9 | 8 | 8 | 17.6 | 4.55 | 12.5 | 23 | 12.5 | 33 | 7 | 18 | 7 × 11 × 9 | ||||||
| 30 | 200～3960 | 60 | 40 | 10 | 70.2 | 101 | 40 | M8×12 | 9 | 21.05 | 6 | 12.5 | 28 | 16 | 42 | 10 | 23 | 9 × 14 × 9 | 80 | |||||
The kit includes 1 block. For additional blocks, please purchase a single block model.The reference surface is set on the side of the block and slide rail with the linear groove. When used, make sure to align the two reference surfaces with each other.The running parallelism is the value after the slide rail is fixed. (It is not the value before the screws of the slide rail are tightened.)Since this product has no surface treatment, please be sure to take anti-rust measures.Dimension E of length specified type needs to be calculated. Please refer to "detailed dimension of Dimension L specified type" for calculation method■ Single Block
| Part Number | Block Dimension (mm) | ||||||||||||
| Type | Nominal Number | W | B | B1 | L1 | L2 | C | M×ℓ | T | H2 | K1 | K2 | G |
| C-ELGB | 15 | 34 | 26 | 4 | 39.8 | 59.3 | 26 | M4×6 | 6 | 5.6 | 10.3 | 3.5 | 5 |
| 20 | 42 | 32 | 5 | 48.1 | 71.2 | 32 | M5×7 | 7.5 | 6 | 12.3 | 4.15 | 12.5 | |
| 25 | 48 | 35 | 6.5 | 59 | 87.5 | 35 | M6×9 | 8 | 8 | 17.6 | 4.55 | 12.5 | |
| 30 | 60 | 40 | 10 | 70.2 | 101 | 40 | M8×12 | 9 | 21.05 | 6 | 12.5 | ||
| Nominal Model | Basic Rated Load | Static Allowable Moment | Mass | |||
| C (Dynamic) kN | Co (Static) kN | MA・MB kN-m | MC kN-m | Blocks kg | Guide Rails kg/m | |
| 15 | 7.83 | 16.19 | 0.1 | 0.13 | 0.15 | 1.25 |
| 20 | 10.31 | 21.13 | 0.16 | 0.22 | 0.24 | 2.08 |
| 25 | 16.27 | 32.4 | 0.32 | 0.38 | 0.41 | 2.67 |
| 30 | 23.7 | 47.46 | 0.55 | 0.68 | 0.76 | 4.35 |
■ L Detailed dimension of dimension specified type
Dimension L specified type cuts both ends of the rail equally. Refer to the table below for the number of mounting holes (M) of the slide rail at this time.
In addition, E dimension is calculated with the formula below
| Nominal Number | 15 | 20 | 25 | 30 | Number of Mounting Holes M |
| L | 100～131 | 100～139 | 100～141 | － | 2 |
| 132～191 | 140～199 | 142～201 | 200～279 | 3 | |
| 192～251 | 200～259 | 202～261 | 280～343 | 4 | |
| 252～311 | 260～319 | 262～321 | 344～423 | 5 | |
| 312～371 | 320～379 | 322～381 | 424～503 | 6 | |
| 372～431 | 380～439 | 382～441 | 504～583 | 7 | |
| 432～491 | 440～499 | 442～501 | 584～663 | 8 | |
| 492～551 | 500～559 | 502～561 | 664～743 | 9 | |
| 552～611 | 560～619 | 562～621 | 744～823 | 10 | |
| 612～671 | 620～679 | 622～681 | 824～903 | 11 | |
| 672～731 | 680～739 | 682～741 | 904～983 | 12 | |
| 732～791 | 740～799 | 742～801 | 984～1063 | 13 | |
| 792～851 | 800～859 | 802～861 | 1064～1143 | 14 | |
| 852～911 | 860～919 | 862～921 | 1144～1223 | 15 | |
| 912～971 | 920～979 | 922～981 | 1224～1303 | 16 | |
| 972～1031 | 980～1039 | 982～1041 | 1304～1383 | 17 | |
| 1032～1091 | 1040～1099 | 1042～1101 | 1384～1463 | 18 | |
| 1092～1151 | 1100～1159 | 1102～1161 | 1464～1543 | 19 | |
| 1152～1211 | 1160～1219 | 1162～1221 | 1544～1623 | 20 | |
| 1212～1271 | 1220～1279 | 1222～1281 | 1624～1703 | 21 | |
| 1272～1331 | 1280～1339 | 1282～1341 | 1704～1783 | 22 | |
| 1332～1391 | 1340～1399 | 1342～1401 | 1784～1863 | 23 | |
| 1392～1451 | 1400～1459 | 1402～1461 | 1864～1943 | 24 | |
| 1452～1511 | 1460～1519 | 1462～1521 | 1944～2023 | 25 | |
| 1512～1571 | 1520～1579 | 1522～1581 | 2024～2103 | 26 | |
| 1572～1631 | 1580～1639 | 1582～1641 | 2104～2183 | 27 | |
| 1632～1691 | 1640～1699 | 1642～1701 | 2184～2263 | 28 | |
| 1692～1751 | 1700～1759 | 1702～1761 | 2264～2343 | 29 | |
| 1752～1811 | 1760～1819 | 1762～1821 | 2344～2423 | 30 | |
| 1812～1871 | 1820～1879 | 1822～1881 | 2424～2503 | 31 | |
| 1872～1931 | 1880～1939 | 1882～1941 | 2504～2583 | 32 | |
| 1932～1991 | 1940～1999 | 1942～2001 | 2584～2663 | 33 | |
| 1992～2051 | 2000～2059 | 2002～2061 | 2664～2743 | 34 | |
| P | 60 | 80 | |||
| Nominal Model | 15 | 20 | 25 | 30 | Number of Mounting Holes M |
| L | 2052～2111 | 2060～2119 | 2062～2121 | 2744～2823 | 35 |
| 2112～2171 | 2120～2179 | 2122～2181 | 2824～2903 | 36 | |
| 2172～2231 | 2180～2239 | 2182～2241 | 2904～2983 | 37 | |
| 2232～2291 | 2240～2299 | 2242～2301 | 2984～3063 | 38 | |
| 2292～2351 | 2300～2359 | 2302～2361 | 3064～3143 | 39 | |
| 2352～2411 | 2360～2419 | 2362～2421 | 3144～3223 | 40 | |
| 2412～2471 | 2420～2479 | 2422～2481 | 3224～3303 | 41 | |
| 2472～2531 | 2480～2539 | 2482～2541 | 3304～3383 | 42 | |
| 2532～2591 | 2540～2599 | 2542～2601 | 3384～3463 | 43 | |
| 2592～2651 | 2600～2659 | 2602～2661 | 3464～3543 | 44 | |
| 2652～2711 | 2660～2719 | 2662～2721 | 3544～3623 | 45 | |
| 2712～2771 | 2720～2779 | 2722～2781 | 3624～3703 | 46 | |
| 2772～2831 | 2780～2839 | 2782～2841 | 3704～3783 | 47 | |
| 2832～2891 | 2840～2899 | 2842～2901 | 3784～3863 | 48 | |
| 2892～2951 | 2900～2959 | 2902～2961 | 3864～3943 | 49 | |
| 2952～3011 | 2960～3019 | 2962～3021 | 3944～3960 | 50 | |
| 3012～3071 | 3020～3079 | 3022～3081 | - | 51 | |
| 3072～3131 | 3080～3139 | 3082～3141 | 52 | ||
| 3132～3191 | 3140～3199 | 3142～3201 | 53 | ||
| 3192～3251 | 3200～3259 | 3202～3261 | 54 | ||
| 3252～3311 | 3260～3319 | 3262～3321 | 55 | ||
| 3312～3371 | 3320～3379 | 3322～3381 | 56 | ||
| 3372～3431 | 3380～3439 | 3382～3441 | 57 | ||
| 3432～3491 | 3440～3499 | 3442～3501 | 58 | ||
| 3492～3551 | 3500～3559 | 3502～3561 | 59 | ||
| 3552～3611 | 3560～3619 | 3562～3621 | 60 | ||
| 3612～3671 | 3620～3679 | 3622～3681 | 61 | ||
| 3672～3731 | 3680～3739 | 3682～3741 | 62 | ||
| 3732～3791 | 3740～3799 | 3742～3801 | 63 | ||
| 3792～3851 | 3800～3859 | 3802～3861 | 64 | ||
| 3852～3911 | 3860～3919 | 3862～3921 | 65 | ||
| 3912～3960 | 3920～3960 | 3922～3960 | 66 | ||
| P | 60 | 80 | |||
●Running Parallelism
| Rail Length (mm) | Accuracy grade (μm) |
| 100-200 | 14 |
| 200-300 | 15 |
| 300-500 | 17 |
| 500-700 | 20 |
| 700-900 | 22 |
| 900-1100 | 24 |
| 1100-1500 | 26 |
| 1500-1900 | 28 |
| 1900-2500 | 31 |
Product Features
Feature of Linear Guides 1: Standard rails are equipped with dust covers to prevent dirt from accumulating in the mounting holes when the equipment is in use.Feature of Linear Guides 2: The slide rail and the slider are in contact with each other through the rolling ball, so the shaking is small, and it is suitable for equipment with precision requirements.
Feature of Linear Guides 3: Due to a point-to-surface contact, the frictional resistance is small, and it can perform subtle movements to achieve device positioning.
Feature of Linear Guides 4: It has a large allowable load because the force on the rotating surface is dispersed due to the rolling groove of the ball.
Feature of Linear Guides 5: It is suitable for high speed motion because it is not easy to produce friction heat when operating and not easily deformed by heat.
Selection Calculation
The service life of linear guide is divided into 3 categories as follows:
① Operating distance life
here.
① Operating distance life
When the linear guide makes the linear reciprocating motion under load, the repeated stress is often applied to the rolling element (steel ball) or rolling surface (slide rail), resulting in scale-like damage, which is called fatigue stripping of material. The total moving distance before the initial stripping is called the service life of linear guide.
② Rated lifeThe rated life refers to the total travel distance reached by a group of linear guides moving under the same conditions, with 90% not stripping. The rated life can be calculated with the following formula based on the basic dynamic rated load and the load applied on the linear guide.
The load shall be calculated before using a linear guide. It is not easy to calculate the load during the linear reciprocating motion, because there may be vibration or impact during the motion, requiring a full consideration to the distribution of vibration or impact relative to the linear guide. Operating temperature and other factors also have great influence on the service life. Taking all these conditions into account, the above calculation formula is changed into the following one.
③ Operating time life
The load shall be calculated before using a linear guide. It is not easy to calculate the load during the linear reciprocating motion, because there may be vibration or impact during the motion, requiring a full consideration to the distribution of vibration or impact relative to the linear guide. Operating temperature and other factors also have great influence on the service life. Taking all these conditions into account, the above calculation formula is changed into the following one.
The service life can be calculated by obtaining the travel distance per unit time. When the length of the stroke and the number of strokes are determined, it can be calculated according to the following formula.
For the specific service life and load calculation methods, please click 
here.Usage Method
■ About use of Linear Guides
① MISUMI's Linear Guides is installed with a retainer. Although the ball is not easy to fall off when the slide block is removed, the ball may fall off if the slider is removed from the rail at high speed, or tilted into the slide rail. Please disassemble the slider with care.
② Be sure to avoid colliding the ball back groove cover, otherwise it will affect the ball cycling, resulting in poor sliding.
③ If you have anti-rust requirements, please choose the Low Temp. Black Chrome Plating Surface Treatment or Stainless Steel SUS440C products.
■ About maintenance of Linear Guides (supply of grease)
① Grease forms an oil film on the surface of the linear guide ball and rail surface to effectively reduce friction and prevent sintering.
Decrease and aging of grease will greatly affect the life of the linear guide, so please add grease at the right time according to the service conditions.
MISUMI's linear guides are sealed with the greases at the time of shipment, so they can be used directly.
② Recommend grease filling interval:
① MISUMI's Linear Guides is installed with a retainer. Although the ball is not easy to fall off when the slide block is removed, the ball may fall off if the slider is removed from the rail at high speed, or tilted into the slide rail. Please disassemble the slider with care.
② Be sure to avoid colliding the ball back groove cover, otherwise it will affect the ball cycling, resulting in poor sliding.
③ If you have anti-rust requirements, please choose the Low Temp. Black Chrome Plating Surface Treatment or Stainless Steel SUS440C products.
■ About maintenance of Linear Guides (supply of grease)
① Grease forms an oil film on the surface of the linear guide ball and rail surface to effectively reduce friction and prevent sintering.
Decrease and aging of grease will greatly affect the life of the linear guide, so please add grease at the right time according to the service conditions.
MISUMI's linear guides are sealed with the greases at the time of shipment, so they can be used directly.
② Recommend grease filling interval:
Usually, perform the grease filling maintenance once every 3 months.
The specific maintenance time shall be adjusted according to the actual situation. It is recommended to check the grease condition once every 100 km.
* The above is the grease filling interval under the moving distance standard. Depending on the operating environment, the grease injection interval must be shortened appropriately when the grease is aging and dirty.
The specific maintenance time shall be adjusted according to the actual situation. It is recommended to check the grease condition once every 100 km.
* The above is the grease filling interval under the moving distance standard. Depending on the operating environment, the grease injection interval must be shortened appropriately when the grease is aging and dirty.
Precautions
For normal use of Linear Guides, the installation of the linear guide needs to meet the following four points:
① Whether the shape of the mounting surface produces of Linear Guides interference
② Keep the flatness of the workpiece mounting surface at about 5μ, otherwise the slider will be slightly deformed
③ Whether the error values of guide parallelism and fitting height are within the allowable installation values
④ Use the standard of Linear Guides
Installation method of Linear Guides Click
here for the detailed installation method
② Keep the flatness of the workpiece mounting surface at about 5μ, otherwise the slider will be slightly deformed
③ Whether the error values of guide parallelism and fitting height are within the allowable installation values
④ Use the standard of Linear Guides
Installation method of Linear Guides Click
here for the detailed installation methodExample of Use
Mechanism name: Belt-driven handling device
Feature of Linear Guides 1: Suitable for medium precision and medium frequency driving and positioning.
Feature of Linear Guides 2: A linear guide is configured in the center to achieve miniaturization.
For details, clickhere
Feature of Linear Guides 1: Suitable for medium precision and medium frequency driving and positioning.
Feature of Linear Guides 2: A linear guide is configured in the center to achieve miniaturization.
For details, click
here| Medical | Smart phone | |
 |  | |
| Robotics | Electronic & Electrical Appliances | |
 |  |
Related Products
| Miniature linear guide Standard light preloading type | Miniature linear guide Wide slide rail type | Heavy Load linear guide | ||
 |  |  | ||
| Typical Linear Guides model: SSEB10-55 | Typical Linear Guides model: SSEBW12-200 | Typical Linear Guides model: SXR24-280 |
Related Documents
For the installation and use of Linear Guides, please refer to here
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| C-ELG15-340 |
| C-ELG15-400 |
| C-ELG15-[60-2799/1] |
| C-ELG20-220 |
| C-ELG20-520 |
| C-ELG20-[100-2799/1] |
| C-ELG25-160 |
| C-ELG25-220 |
| C-ELG25-280 |
| C-ELG25-340 |
| C-ELG25-400 |
| C-ELG25-460 |
| C-ELG25-520 |
| C-ELG25-[60-2799/1] |
| C-ELG30-[200-2799/1] |
| C-ELGB25 |
| C-ELGB30 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Rail Length L (mm) | Assembly Height H (mm) | Nominal Part Number | Set / Single Item | Lubrication Type | L Dimension Type | Applicable Linear Guide | Rail Material (Surface Treatment) | Rail Surface Treatment |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 106.82 | 1 Piece(s) | Available | 10 Day(s) | 340 | 24 | 15 | Set | Lithium Grease Filled | Fixed Type | - | Carbon Steel | none | |
- | 1 Piece(s) | 1 Day(s) | 400 | 24 | 15 | Set | Lithium Grease Filled | Fixed Type | - | Carbon Steel | none | ||
- | 1 Piece(s) | 10 Day(s) | 60 ～ 2799 | 24 | 15 | Set | Lithium Grease Filled | Specified Type | - | Carbon Steel | none | ||
MYR 91.02 | 1 Piece(s) | Available | 10 Day(s) | 220 | 28 | 20 | Set | Lithium Grease Filled | Fixed Type | - | Carbon Steel | none | |
MYR 133.18 | 1 Piece(s) | Available | 10 Day(s) | 520 | 28 | 20 | Set | Lithium Grease Filled | Fixed Type | - | Carbon Steel | none | |
- | 1 Piece(s) | 10 Day(s) | 100 ～ 2799 | 28 | 20 | Set | Lithium Grease Filled | Specified Type | - | Carbon Steel | none | ||
MYR 115.50 | 1 Piece(s) | Available | 10 Day(s) | 160 | 33 | 25 | Set | Lithium Grease Filled | Fixed Type | - | Carbon Steel | none | |
MYR 123.08 | 1 Piece(s) | Available | 10 Day(s) | 220 | 33 | 25 | Set | Lithium Grease Filled | Fixed Type | - | Carbon Steel | none | |
MYR 134.20 | 1 Piece(s) | Available | 6 Day(s) | 280 | 33 | 25 | Set | Lithium Grease Filled | Fixed Type | - | Carbon Steel | none | |
MYR 145.36 | 1 Piece(s) | Available | 6 Day(s) | 340 | 33 | 25 | Set | Lithium Grease Filled | Fixed Type | - | Carbon Steel | none | |
MYR 156.50 | 1 Piece(s) | Available | 6 Day(s) | 400 | 33 | 25 | Set | Lithium Grease Filled | Fixed Type | - | Carbon Steel | none | |
MYR 167.66 | 1 Piece(s) | Available | 6 Day(s) | 460 | 33 | 25 | Set | Lithium Grease Filled | Fixed Type | - | Carbon Steel | none | |
MYR 178.76 | 1 Piece(s) | Available | 6 Day(s) | 520 | 33 | 25 | Set | Lithium Grease Filled | Fixed Type | - | Carbon Steel | none | |
- | 1 Piece(s) | 10 Day(s) | 60 ～ 2799 | 33 | 25 | Set | Lithium Grease Filled | Specified Type | - | Carbon Steel | none | ||
- | 1 Piece(s) | 12 Day(s) | 200 ～ 2799 | 42 | 30 | Set | Lithium Grease Filled | Specified Type | - | Carbon Steel | none | ||
MYR 74.94 | 1 Piece(s) | Available | 6 Day(s) | - | 33 | 25 | Block Only | - | - | C-ELG25 | - | - | |
MYR 108.54 | 1 Piece(s) | Available | 1 Day(s) | - | 42 | 30 | Block Only | - | - | C-ELG30 | - | - |
Loading...
Basic Information
| Block Type(mm) | Standard Block | Rail Type | Standard Rail | Preload(N・m) | Normal Clearance |
|---|---|---|---|---|---|
| Accuracy Standards(N・m) | Standard Grade | Material | Carbon Steel | Ball Arrangement | Medium, Heavy Load Type |
| No. of Blocks(mm) | 1 | Retainer | N/A | Lubrication Type(mm) | Lubrication Applied |
| Rolling Element | Ball | Block Material (Surface Treatment) | Carbon Steel |
Specification/Dimensions
-
Rail Length L(mm)
-
Assembly Height H(mm)
-
Nominal Part Number
-
Set / Single Item
- Set
- Block Only
-
Lubrication Type
- Lithium Grease Filled
-
L Dimension Type
- Fixed Type
- Specified Type
-
Applicable Linear Guide
-
Rail Material (Surface Treatment)
- Carbon Steel
-
Rail Surface Treatment
- none
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 1 Day(s) or Less
- 6 Day(s) or Less
- 10 Day(s) or Less
- 12 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Frequently asked question (FAQ)
- Question: Can linear guides or sliders be purchased separately?
- Answer: Taking into account the accuracy of products, single slider models clearly indicated in the catalog can be purchased, and no others can be purchased.
- Question: Linear guide indicators include basic dynamic load rating and basic static load rating. Which indicator is the reference when selecting?
- Answer: The basic dynamic load rating is used to calculate the rail life, and the basic static load rating is used to calculate the maximum allowable load.
- Question: What problems should be paid attention to when the linear guide is installed vertically?
- Answer: Attention should be paid to prevent the slider from falling off and causing the balls to fall off during installation.
- Question: Can the rail or slider be repaired if it is damaged?
- Answer: Repair service is not provided, re-purchase is recommended.
- Question: Can the corresponding MISUMI linear guide products be selected according to the third-party guide rail model?
- Answer: MISUMI offers third-party brand replacement services, so as long as the third party product model is given, we can replace it with corresponding MISUMI model. For details, please contact the customer service email or call the customer service phone.
- Question: Can linear guide length be arbitrarily specified?
- Answer: It can be specified arbitrarily. However, MISUMI linear guides are divided into length fixed type and length specified type, and in case of length specified type, the length dimensions for length fixed type cannot be specified.
Additional Products in this Category
- Linear Guides for Heavy Load - With Plastic Retainers, Interchangeable, Light Preload
- Miniature Linear Guides - Wide Rails - Long Blocks with Dowel Holes, Light Preload
- Miniature Linear Guides Wide Rails
- Linear Guide Short Block-Low Profile EG Type (ROHS Compliant)
- [Individual Block Units] Full-Ball Type LM Guide, International Standard, HSR Type
- H Type Economy Guide With Flange (EGH-F, EGH-FL)
- Linear Rail System SBI-HL/HLL Series
- Linear Rail System SBI-FV Series
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy