(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Temperature Sensors Screw Mount Bendable PT100 Type (Part Numbers)
- Volume Discount
Part Number
Configured Part Number is shown.
For more information on product dimensional drawings, please refer to the Temperature Sensors product catalog.
Please keep the upper limit of the Temperature Sensors below the temperature measurement range of the product. If the bushing temperature exceeds the heat-resistant temperature, it is very easy to cause the breakage of the temperature measurement wire.
If the temperature of heat generating parts exceeds 100°C, please choose the specification with a front end as long as possible.
Economy Temperature Sensor Bendable Screw Mount
Flexible PositioningSecure Screw MountPrecise Measurement
- Features a bendable design for easy installation in tight spaces or around obstacles, maximizing placement options.
- Equipped with a screw mount (M6) for fast and secure attachment to a pre-drilled hole, saving you setup time.
- Delivers accurate temperature readings within a specified range.
- Utilizes a PT100 element known for excellent stability and repeatability, ensuring consistent performance over time.
- Features a bendable design for easy installation in tight spaces or around obstacles, maximizing placement options.
MISUMI Standard
Cheaper Price
Product Variety
3D CAD Support
Temperature Sensors Product Overview
Temperature Sensors
The thermocouple consists of two wires made of different materials, which are welded together at the end. After the ambient temperature of the unheated part is measured, the temperature of the heating point can be accurately known. Because it must have the conductor made of two different materials, it is called the thermocouple. The thermocouples made of different materials can be used in different temperature ranges, and their sensitivities are different from each other. The sensitivity of a thermocouple refers to the change in the output potential difference when the temperature of the heating point changes by 1°C. For most metal-supported thermocouples, this value is between 5-40 µV/°C.
PT100
Pt100 is a platinum thermal resistance, and its resistance value is proportional to the change of temperature. 100 after PT means that its resistance value is 100 ohms at 0°C and about 138.5 ohms at 100°C.
The thermocouple consists of two wires made of different materials, which are welded together at the end. After the ambient temperature of the unheated part is measured, the temperature of the heating point can be accurately known. Because it must have the conductor made of two different materials, it is called the thermocouple. The thermocouples made of different materials can be used in different temperature ranges, and their sensitivities are different from each other. The sensitivity of a thermocouple refers to the change in the output potential difference when the temperature of the heating point changes by 1°C. For most metal-supported thermocouples, this value is between 5-40 µV/°C.
PT100
Pt100 is a platinum thermal resistance, and its resistance value is proportional to the change of temperature. 100 after PT means that its resistance value is 100 ohms at 0°C and about 138.5 ohms at 100°C.
Temperature Sensors Dimensional Drawing
For more information on product dimensional drawings, please refer to the Temperature Sensors product catalog.
Temperature Sensors Specification Table
| Part Number | Total Length F(m) | Screw Size | Sensor Type | Temperature Range | Wire Operating Temperature Range |
| C-MFNPM6 | 1 | M6 | PT100 Type | 0 to 150℃ | 150℃ |
| 5 |
Temperature Sensors Product Features
Temperature Sensors Precautions
Please keep the upper limit of the Temperature Sensors below the temperature measurement range of the product. If the bushing temperature exceeds the heat-resistant temperature, it is very easy to cause the breakage of the temperature measurement wire.If the temperature of heat generating parts exceeds 100°C, please choose the specification with a front end as long as possible.Temperature Sensors Usage Method
Resistors should not be installed too close to the door or the heater. It is sufficient to make the front end of the temperature measuring resistor come into contact with the object to be measured. The gap between the sheath and protection sheath and the temperature mounting hole if not filled with insulation may cause overheating or cold air to enter the heating chamber. Therefore, this gap must be filled with insulating material such as insulating earth to stabilize the heat in the chamber. Air convection affects the accuracy of the heating process. The sleeve should not be installed too close to the heating chamber to avoid exceeding 100°C. The installation of the temperature measuring resistor should be avoided as much as possible from strong magnetic and electric fields. Therefore, the temperature measuring resistor and power cable should not be installed close to each other to avoid errors caused by signal interference. Do not install the temperature measuring resistor with the low-flow measuring medium. When measuring the gas temperature inside the tube, the temperature measuring resistor needs to be installed in the opposite direction of circulation and in full contact with the gas.
Temperature Sensors Related Products
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| C-MFNPM6-1 |
| C-MFNPM6-5 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Lead Wire Length (F) (m) |
|---|---|---|---|---|---|
MYR 50.62 | 1 Piece(s) | Available | 1 Day(s) | 1 | |
MYR 83.30 | 1 Piece(s) | Available | 6 Day(s) | 5 |
Loading...
Brand introduction
MISUMI, the head office company, has been providing customers with various high-quality parts such as automation parts, mold parts, electronic parts, tool & consumables, etc. quickly and accurately since its establishment in Japan in 1963. By compiling product catalogs independently and establishing a marketing system for direct sales of products, a low-cost business operation mode has been created, and by making annual product plans according to customers' opinions and requirements, MISUMI brand-name products with high quality level have been continuously developed
Basic Information
| Type of Temperature Sensor | Temperature Measuring Resistor | Sheath, Protection Tube Diameter(Ø) | 4.3 | Measurement Object | Temperature Sensor |
|---|---|---|---|---|---|
| Type of Device | Pt100Ω | Temperature Measuring Resistor Structure | Protection Tubes | Operating Temperature Range(°C) | 0::150 |
| Sheath, Protecting Tube's Thread Nominal | M6 |
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Frequently asked question (FAQ)
- Question: What are the main types of sensors currently sold by MISUMI?
- Answer: Photoelectric sensors, proximity sensors, pressure sensors, temperature sensors, etc.
- Question: What is a photo microsensors?
- Answer: With an amplifier, an emitter and a receiver built in its integrated main body, it is a sensor that is easy to install and adjust, usually designed for detecting the passage of workpieces on the conveying line and for positioning workpieces, etc.
- Question: What are the features of the photoelectric sensor?
-
Answer:
1. The action (response time) is very fast because light is used as the medium.
2. It has a longer detection distance than the light sensor and allows for remote detection.
3. Objects made of almost any material can be detected as long as they reflect light. - Question: What are the detection methods of the photoelectric sensor?
- Answer: Transmittance type, regression reflection type, diffusion reflection type, limited reflection type, etc.
Additional Products in this Category
- Temperature Sensors/L-Shape/K-Thermocouple
- Film Type Temperature-Sensing Resistance
- General Purpose Temperature Sensor, TN3 Series Terminal Box Type Thermocouple, Ungrounded
- General-Purpose Temperature Sensor TN6 Series, Thermocouple With Screw, Not Grounded
- K Thermocouples with Terminal Boxes
- Platinum thermometer resistance stick type
- Temperature Sensor Series E52 Dedicated Type
- Temperature Sensor Series E52 Thermistor
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy