(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Temperature Sensors Standard Screw Mount K-Thermocouple (C-MSNDML6-5)
- Volume Discount
MiSUMi Economy
Temperature Sensors Standard Screw Mount K-Thermocouple
These Temperature Sensors Thermocouple type K are an economy item, The price is cheaper than the MISUMI standard product.They offer a wide variety of sizes to choose from.
[Feature]
● Temperature Sensors : Thermocouple Type K
● Screw Size: M6 X 1.0
● Wire Length (m.): 1, 2, and 5
● Temperature Range (°C) : 0-300
● Crimp Terminal Type: Y-Shaped 2 sets
[Application]
It is used in a variety of application such as heat treatment, packaging industry , plastic industry , and so on.
Part Number
Configured Part Number is shown.
C-MSNDML6-5
For more information on product dimensional drawings, please refer to the Temperature Sensors product catalog.
Temperature Sensors Precautions for use
The sheath type can be bent (minimum bending radius: sheath diameter × 5), but the part in the temperature detection range (20 mm of the front end) cannot be bent. The protective tube type cannot be bent, otherwise the temperature cannot be measured correctly.
To extend the thermocouple lead wire, please use the compensation lead wire.
Please strictly observe the heat resistant temperature of each part in product page. Please note that even the upper limit of the temperature measurement is very high, malfunctions such as wire breakage may occur if the heat-resistant Temperature Sensors is exceeded.
Do not apply large external force or vibration.
Please note the heat resistance temperature of the sleeve part.
Please keep the upper limit of the temperature below the temperature measurement range of the product. If the bushing temperature exceeds the heat-resistant temperature, it is very easy to cause the breakage of the temperature measurement wire.
If the temperature of heat generating parts exceeds 100°C, please choose the specification with a front end as long as possible.
Economy Thermocouple Temperature Sensor
Temperature MeasurementEasy InstallationMultiple Lead Wire Length
- This sensor offers a wide temperature range, making it suitable for various applications in different industries.
- The screw mount design allows for quick and simple installation into a pre-drilled hole, saving time and effort during setup.
- Built with a robust design, this sensor ensures reliable performance and longevity in harsh industrial environments.
- Thermocouple with multiple lead wire length options
- Delivers reliable and precise temperature readings for optimal process control.
MISUMI Standard
Cheaper Price
Product Variety
3D CAD Support
Temperature Sensors Dimensional Drawing
For more information on product dimensional drawings, please refer to the Temperature Sensors product catalog.
Temperature Sensors Specification Table
| Temperature Sensors Type | F(m) | Screw Size | L(mm) | Shape | Temperature Range |
| C-MSNDML6 | 1 | M6×1.0 | 65 | K type thermocouples | 0 to 300℃ |
| 2 | |||||
| 5 |
Temperature Sensors Product Overview
Temperature Sensors, Thermocouple Sensor
The thermocouple consists of two wires made of different materials, which are welded together at the end. After the ambient temperature of the unheated part is measured, the temperature of the heating point can be accurately known. Because it must have the conductor made of two different materials, it is called the thermocouple. The thermocouples made of different materials can be used in different temperature ranges, and their sensitivities are different from each other. The sensitivity of a thermocouple refers to the change in the output potential difference when the temperature of the heating point changes by 1°C. For most metal-supported thermocouples, this value is between 5-40 µV/°C.
PT100
Pt100 is a platinum thermal resistance, and its resistance value is proportional to the change of temperature. 100 after PT means that its resistance value is 100 ohms at 0°C and about 138.5 ohms at 100°C.
The thermocouple consists of two wires made of different materials, which are welded together at the end. After the ambient temperature of the unheated part is measured, the temperature of the heating point can be accurately known. Because it must have the conductor made of two different materials, it is called the thermocouple. The thermocouples made of different materials can be used in different temperature ranges, and their sensitivities are different from each other. The sensitivity of a thermocouple refers to the change in the output potential difference when the temperature of the heating point changes by 1°C. For most metal-supported thermocouples, this value is between 5-40 µV/°C.
PT100
Pt100 is a platinum thermal resistance, and its resistance value is proportional to the change of temperature. 100 after PT means that its resistance value is 100 ohms at 0°C and about 138.5 ohms at 100°C.
Temperature Sensors Product Feature
Temperature Sensors Related Products
 |  |  |  |
| Temperature Sensors High-temperature thermocouples | Temperature Sensors Screw-mounting thermocouples | Temperature Sensors Screw mount bendable PT100 | Round terminal thermocouples |
Temperature Sensors Precautions
Temperature Sensors Precautions for use
The sheath type can be bent (minimum bending radius: sheath diameter × 5), but the part in the temperature detection range (20 mm of the front end) cannot be bent. The protective tube type cannot be bent, otherwise the temperature cannot be measured correctly.To extend the thermocouple lead wire, please use the compensation lead wire.Please strictly observe the heat resistant temperature of each part in product page. Please note that even the upper limit of the temperature measurement is very high, malfunctions such as wire breakage may occur if the heat-resistant Temperature Sensors is exceeded.Do not apply large external force or vibration.Please note the heat resistance temperature of the sleeve part.Please keep the upper limit of the temperature below the temperature measurement range of the product. If the bushing temperature exceeds the heat-resistant temperature, it is very easy to cause the breakage of the temperature measurement wire.If the temperature of heat generating parts exceeds 100°C, please choose the specification with a front end as long as possible.Temperature Sensors Usage Method
Couples should not be installed too close to the door and heating place, and the insertion depth should be at least 8 to 10 times the diameter of the protection tube; the interval between the thermocouple protection bushing and the wall is not filled with insulation material, resulting in furnace heat overflow or cold air intrusion. Therefore, the interval between the thermocouple protection bushing and the furnace wall hole should be blocked with refractory mud or asbestos cord or other insulation materials so that the accuracy of temperature measurement will not be affected by hot and cold air convection; The cold end of the thermocouple is too close to the furnace, causing the temperature to rise above 100℃; thermocouples should be as far away as possible from strong magnetic and electric fields, so the thermocouples and power cable should not be installed in the same conduit to avoid deviation caused by interference; thermocouples can not be installed in the area where the measured medium rarely flow. Thermocouples must be installed against the direction of the flow and in full contact with the gas when the tube gas Temperature Sensors is measured by thermocouples.
Temperature Sensors Brand introduction
MISUMI, the head office company, has been providing customers with various high-quality parts such as automation parts, mold parts, electronic parts, tool & consumables, etc. quickly and accurately since its establishment in Japan in 1963. By compiling product catalogs independently and establishing a marketing system for direct sales of products, a low-cost business operation mode has been created, and by making annual product plans according to customers' opinions and requirements, MISUMI brand-name products with high quality level have been continuously developed
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| C-MSNDML6-5 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Lead Wire Length (F) (m) |
|---|---|---|---|---|---|
MYR 60.44 | 1 Piece(s) | Available | 1 Day(s) | 5 |
Loading...
For more information on product dimensional drawings, please refer to the product catalog.
Dimensional Drawing
For more information on product dimensional drawings, please refer to the product catalog.
Specification Table
| Type | F(m) | Screw Size | L(mm) | Shape | Temperature Range |
| C-MSNDML6 | 1 | M6×1.0 | 65 | K type thermocouples | 0 to 300℃ |
| 2 | |||||
| 5 |
Basic Information
| Type of Temperature Sensor | Thermocouple | Type of Thermocouple | K Thermocouple | Sheath, Protection Tube Diameter(Ø) | 3 |
|---|---|---|---|---|---|
| Sheath, Protecting Tube Length L(mm) | 65 | Measurement Object | Temperature Sensor | Temperature Measurement Contact Point | Grounded Type |
| Operating Temperature Range(°C) | 0::300 |
Please check the type/dimensions/specifications of the part C-MSNDML6-5 in the Temperature Sensors Standard Screw Mount K-Thermocouple series.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Frequently asked question (FAQ)
- Question: What are the main types of sensors currently sold by MISUMI?
- Answer: Photoelectric sensors, proximity sensors, pressure sensors, temperature sensors, etc.
- Question: What is a photo microsensors?
- Answer: With an amplifier, an emitter and a receiver built in its integrated main body, it is a sensor that is easy to install and adjust, usually designed for detecting the passage of workpieces on the conveying line and for positioning workpieces, etc.
- Question: What are the features of the photoelectric sensor?
-
Answer:
1. The action (response time) is very fast because light is used as the medium.
2. It has a longer detection distance than the light sensor and allows for remote detection.
3. Objects made of almost any material can be detected as long as they reflect light. - Question: What are the detection methods of the photoelectric sensor?
- Answer: Transmittance type, regression reflection type, diffusion reflection type, limited reflection type, etc.
Products like this...
| Part Number |
|---|
| C-MSNDML6-1 |
| C-MSNDML6-2 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Lead Wire Length (F) (m) |
|---|---|---|---|---|---|
MYR 34.28 | 1 Piece(s) | Available | 6 Day(s) | 1 | |
MYR 40.80 | 1 Piece(s) | Available | 1 Day(s) | 2 |
Additional Products in this Category
- Temperature Sensors/L-Shape/K-Thermocouple
- Temperature Sensor - Double Element Type (K Thermocouple / Temperature Measuring Resistor)
- Temperature Sensors - Compact, K-Thermocouple / Temperature-Resistor
- Temperature Sensors High Temperature K-Thermocouple
- Temperature Sensors Round Terminal K-Thermocouple
- General-Purpose Temperature Sensor, TN5 Series, Lead Wire Type Thermocouple, Not Grounded
- General-Purpose Temperature Sensor TN6 Series, Thermocouple With Screw, Not Grounded
- Small terminal box K thermocouple
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy