(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Cam Followers Stainless Steel, Crown, Hex Socket (E-CFUAC3-10)
- Economy
- Volume Discount
- Cam Followers Stainless Steel, Hex Socket, C-CFMRS series from MISUMI.
- The roller outer diameter can be selected from 10 mm to 40 mm.
- The roller width can be selected from 7 mm to 20 mm.
- The allowable rotational speed of cam follower can be selectable up to 17200 RPM.
- The material of cam follower is made of Equivalent to SUS440.
- The turning accuracy of the outer wheel is ±0.2 mm.
- RoHS
Part Number
Configured Part Number is shown.
E-CFUAC3-10
Economy Cam Followers
- Made from stainless steel equivalent to SUS440. Offers high corrosion resistance, ideal for harsh environments, and ensures long-lasting performance.
- Crowned outer ring design. Helps distribute load evenly, reducing stress concentrations and prolonging the bearing's lifespan.
- Allows rotational speeds up to specified maximum RPM.
- Roller bearing with various size options
- Designed to withstand impact and heavy loads, making it suitable for demanding industrial environments.
MISUMI Standard
Cheaper Price
Product Variety
3D CAD Support
A cam follower is a high-performance shaft-type bearing with needle-shaped rollers, known as needle rollers, assembled inside. The needle rollers enhance rotational capability and can withstand high-speed rotation. In addition, the outer ring features a thicker wall design compared to standard bearings, making it suitable for applications subject to impact loads or heavy loads.
Note: For some models, the packaging has changed from box to bag. During the transition period, mixed shipments may occur, but this does not affect usage.
Specifications with d ≥ 10 are equipped with a grease nipple.Due to the large arc radius, the arc shape may not be visible on the actual product; this is not a product defect.
| Type | Material | Accessories | |
| Application | With seal | ||
| Standard type | C-CFMRS | Equivalent to SUS440 | 1 hex nut (SUS304) |
| Low dust generation | E-CFUAC | Equivalent to SUS440 | 1 hex nut (SUS304) |
| Type |  Roller Outer Diameter D | M × Pitch | Roller Width B | B1 | L | ℓ | r | f | *H | Basic Rated Load | Maximum Static Allowable Load (N) | Maximum Speed (rpm) | ||
 Type |  d | Cr (Dynamic) N | Cor (Static) N | |||||||||||
| C-CFMRS E-CFUAC | 3 | 10 | 3 × 0.5 | 7 | 8 | 17 | 5 | 0.5 | 7 | 2 | 1000 | 780 | 360 | 17200 |
| 4 | 12 | 4 × 0.7 | 8 | 9 | 20 | 6 | 8.8 | 2.5 | 1230 | 920 | 683 | 15300 | ||
| 5 | 13 | 5 × 0.8 | 9 | 10 | 23 | 7.5 | 10.1 | 3 | 1890 | 1620 | 890 | 11000 | ||
| 6 | 16 | 6 × 1.0 | 11 | 12 | 28 | 9 | 0.8 | 12 | 3(4) | 2580 | 1910 | 1100 | 9200 | |
| 8 | 19 | 8 × 1.25 | 32 | 11 | 14 | 4 | 2910 | 2440 | 1779 | 8600 | ||||
| 10 | 22 | 10 × 1.25 | 12 | 13 | 36 | 13 | 16.4 | 5(4) | 3875 | 3279 | 1862 | 6200 | ||
| 26 | 4300 | 3535 | 2218 | 4800 | ||||||||||
| 12 | 30 | 12 × 1.5 | 14 | 15 | 40 | 14 | 1 | 22.3 | 6 | 4630 | 3753 | 2534 | 4300 | |
| 32 | 4800 | 3981 | 2931 | 4100 | ||||||||||
| 16 | 35 | 16 × 1.5 | 18 | 19.5 | 52 | 18 | 1.2 | 27 | 5100 | 5010 | 3416 | 3700 | ||
| 18 | 40 | 18 × 1.5 | 20 | 21.5 | 58 | 20 | 1.5 | 31 | 6(8) | 5400 | 5210 | 3760 | 3500 | |
kgf = N × 0.101972*Low dust generation type reference () dimensions;E-CFUAC, d = 12/16/18 specifications are not currently available for sale■ Note
1. The low dust generation type cam follower is filled with low dust generation grease AFE-CA (THK). Its performance and operating temperature are as follows.
| Thickener | Urea-based compound |
| Base oil | Synthetic oil |
| Base oil kinematic viscosity (40°C, mm2/s) | 100 |
| Worked penetration (25°C·60W) | 260 |
| Dropping point (°C) | 258 |
| Evaporation: wt% (99°C·22h) | 0.1 |
| Oil separation: wt% (100°C·22h) | 0.8 |
| Operating temperature (°C) | -40 to +160 (atmospheric environment) |
2. Ideal for load-bearing applications!
3. Also suitable for high-speed rotation!
Standard Cam Follower Structure
Roller Guidance Method
Cam followers with cages are suitable for applications requiring low friction and high speed, while full complement cam followers are suitable for high-speed rotation and heavy load applications.
Seal structure
In non-sealed bearings, the gap between the outer ring and the end rod circumferential area, as well as between the outer ring and the side plate, is small, forming a labyrinth. In sealed bearings, a sealing gasket is installed in the shielded labyrinth section to prevent foreign matter from entering.
Outer ring outer diameter shape
Bearings with a spherical outer ring can alleviate uneven loads caused by installation issues. Bearings with an arc-shaped outer ring have a larger contact area with the guide rail, making them suitable for applications with heavy loads or guide rails with low hardness.
Comparison of slide rail load capacity
· When subjected to impact, even if there is no visible damage, functionality may still be impaired. Please take note.
· Cam followers are suitable for radial loads and are not well suited for thrust loads. Therefore, please avoid using them in applications that apply thrust loads.
Direction of movement
Installation Method
When installing, do not strike the flange of the cam bearing directly with a hammer, as this may cause poor rotation or breakage. Please use a hex wrench or a flathead screwdriver.
Secure the hex socket or screwdriver slot, then use a wrench to tighten the nut.
Bolt tightening torque
When installing the cam bearing follower, do not exceed the maximum tightening torque value of the screw. Otherwise, the threaded part may be damaged.
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
| Part Number |
|---|
| E-CFUAC3-10 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Roller Outer Dia. D (mm) | Width (mm) | Basic Load Rating: Dynamic Load (kN) | Basic Load Rating: Static Load (kN) | Allowable Rotational Speed (rpm) | Material Detail |
|---|---|---|---|---|---|---|---|---|---|---|
MYR 71.59 | 2 Piece(s) | Available | 6 Day(s) | 10 | 7 | 1000 | 780 | 17200 | SUS440C |
Loading...
Basic Information
| Product Category | Cam Followers | Tightening Method | Hex Socket on Head |
|---|
Please check the type/dimensions/specifications of the part E-CFUAC3-10 in the Cam Followers Stainless Steel, Crown, Hex Socket series.
Specification/Dimensions
-
type
- C-CFMRS
- E-CFUAC
-
Roller Outer Dia. D(mm)
-
Width(mm)
-
Allowable Rotational Speed(rpm)
-
Material Detail
- SUS440
- SUS440C
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 1 Day(s) or Less
- 6 Day(s) or Less
- 12 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Frequently asked question (FAQ)
- Question: Mounting Method
- Answer: Do not use a hammer to directly hit the flange of the cam bearing during installation, otherwise it will cause poor rotation or fracture. Fix the inner hexagon or screwdriver slot with a hex socket wrench or a slotted screwdriver, and then turn the nut with a wrench to tighten. Do not exceed the maximum screw tightening torque when installing the cam follower. Otherwise, the threaded portion may be damaged.
- Question: Applicable load of cam follower
- Answer: It is applicable to radial load, but not very applicable to thrust load, so avoid using methods such as applying thrust load.
- Question: Usage difference of different O.D. shapes of outer ring
- Answer: The bearing with spherical outer ring can alleviate uneven load caused by installation problems. The contact area between the bearing with arc outer ring and the slide rail surface is large, suitable for slide rail surfaces with large load or low hardness.
Products like this...
| Part Number |
|---|
| C-CFMRS12-32 |
| C-CFMRS16-35 |
| C-CFMRS18-40 |
| E-CFUAC4-12 |
| E-CFUAC5-13 |
| E-CFUAC6-16 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Roller Outer Dia. D (mm) | Width (mm) | Basic Load Rating: Dynamic Load (kN) | Basic Load Rating: Static Load (kN) | Allowable Rotational Speed (rpm) | Material Detail |
|---|---|---|---|---|---|---|---|---|---|---|
MYR 95.50 | 1 Piece(s) | Available | 12 Day(s) | 32 | 14 | 4.8 | 3.981 | 4100 | SUS440 | |
MYR 150.02 | 1 Piece(s) | Available | 1 Day(s) | 35 | 18 | 5.1 | 5.01 | 3700 | SUS440 | |
MYR 169.62 | 1 Piece(s) | Available | 1 Day(s) | 40 | 20 | 5.4 | 5.21 | 3500 | SUS440 | |
MYR 66.52 | 2 Piece(s) | Available | 6 Day(s) | 12 | 8 | 1230 | 920 | 15300 | SUS440C | |
MYR 64.83 | 2 Piece(s) | Available | 6 Day(s) | 13 | 9 | 1890 | 1620 | 11000 | SUS440C | |
MYR 63.13 | 2 Piece(s) | Available | 6 Day(s) | 16 | 11 | 2580 | 1910 | 9200 | SUS440C |
Additional Products in this Category
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy