(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Heavy Load Hinges, Weld-Mounting
- Volume Discount
- RoHS
Part Number
Configured Part Number is shown.
Product Overview
Economy series Welded butterfly Flat Hinges for heavy object
Flat Hinges,This series of products are butterfly Flat Hinges for heavy objects, which can reach an allowable load of up to 90KG depending on the dimensions (the value when using 2 pcs)
The product is made of stainless steel, and there is no hole in the product body. It is fixed to the object by welding. The fixed object must be kept flat and clean to avoid poor welding.
Flat Hinges,This series of products are butterfly Flat Hinges for heavy objects, which can reach an allowable load of up to 90KG depending on the dimensions (the value when using 2 pcs)
The product is made of stainless steel, and there is no hole in the product body. It is fixed to the object by welding. The fixed object must be kept flat and clean to avoid poor welding.
Dimensional Drawing
Economy series Welded butterfly Flat Hinges for heavy object Dimensional drawing
Refer to the Specification Table below for detailed product dimensions
Material Table
Product Material, Surface Treatment Overview :
・Flat Hinges Material Table
・Flat Hinges Material Table
| Type | Material | Surface Treatment |
| C-HHSYZN | SUS304 | Fog pearlescent grinding |
Specification Table
| Part Number (Type·L) |
| C-HHSYZN50 |
| Part Number | W | R | t | ＊Allowable Load (N) | |
| Type | L | ||||
| C-HHSYZN | 50 | 50 | 6 | 3 | 196 |
| 60 | 64 | 245 | |||
| 75 | 70 | 294 | |||
| 100 | 100 | 10 | 4 | 588 | |
| 125 | 100 | 686 | |||
| 150 | 120 | 882 | |||
Product Features
【Features】
Butterfly Flat Hinges for heavy objects can achieve high allowable loads, and when used with high-hardness bolts,
they can reach a load capacity of up to 90KG (the value when using 2 pcs).
It is recommended to use only two products for each door. Multiple products cannot achieve the effect of increasing the load. At the same time, multiple hinges will cause other interference problems caused by insufficient center-axisstraightness of the hinge.
Butterfly Flat Hinges for heavy objects can achieve high allowable loads, and when used with high-hardness bolts,
they can reach a load capacity of up to 90KG (the value when using 2 pcs).
It is recommended to use only two products for each door. Multiple products cannot achieve the effect of increasing the load. At the same time, multiple hinges will cause other interference problems caused by insufficient center-axisstraightness of the hinge.
Precautions
The flat head bolt type and the ultra-low head bolt type have the same product specifications, only the mounting holes are different. Please refer to the Specification Table for details.
Butterfly Flat Hinges can't increase the allowable load by adding more products. On the contrary, during installation, it is easy to cause eccentric load due to the fact that three center axes can not be on the same horizontal line at the sametime.
It is easy for the door panel to be in a non-displacement state when standing still.
Butterfly Flat Hinges can't increase the allowable load by adding more products. On the contrary, during installation, it is easy to cause eccentric load due to the fact that three center axes can not be on the same horizontal line at the sametime.
It is easy for the door panel to be in a non-displacement state when standing still.
Example of Use
Butterfly Flat Hinges for heavy object Example of use
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| C-HHSYZN50 |
| C-HHSYZN60 |
| C-HHSYZN75 |
| C-HHSYZN100 |
| C-HHSYZN125 |
| C-HHSYZN150 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Length (mm) | Width (W) (mm) | Allowable Load (N) |
|---|---|---|---|---|---|---|---|
MYR 14.87 | 1 Piece(s) | Available | 1 Day(s) | 50 | 50 | 196 | |
MYR 18.86 | 1 Piece(s) | Available | 5 Day(s) | 60 | 64 | 245 | |
MYR 25.98 | 1 Piece(s) | Available | 1 Day(s) | 75 | 70 | 294 | |
MYR 45.11 | 1 Piece(s) | Available | 1 Day(s) | 100 | 100 | 588 | |
MYR 52.08 | 4 Piece(s) | Available | 10 Day(s) | 125 | 100 | 686 | |
MYR 78.33 | 1 Piece(s) | Available | 1 Day(s) | 150 | 120 | 882 |
Loading...
Basic Information
| Flat Hinge Type | Square Plate Type | Main Body Type | Flag Hinge | Operating Environment | Standard |
|---|---|---|---|---|---|
| Mounting Method | Weld-On | Additional Function | Not Provided |
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Frequently asked question (FAQ)
- Question: What is the difference between welded hinges and ordinary hinges? What needs to be paid attention to in the selection?
- Answer: Welded hinges are fixed by electric welding or heat welding. Unlike ordinary hinges which need to be fixed by screws and nuts, objects to be fixed can also be welded. In addition, please pay attention to the hinge surface width when selecting, and do not exceed the width of the fixed object, otherwise the allowable load may not be reached.
- Question: What are the effects of bolts with different head shapes on hinge opening and closing?
- Answer: Depending on the height of the bolt head, the exposed height of the bolt may be too high when the hinge is at 0°, which will lead to the failure of the hinge to open and close from 180° to 0°. For the specific calculation, you may refer to the E value in the specification table, which is the value of the circumferential radius. If the hinge needs to reach 0°, the total height of the exposed part must be less than the E value.
Additional Products in this Category
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy