(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Flat Belts For General Use
MiSUMi Economy
Flat Belts For General Use
This conveyor belt is ideal for use in both general purpose and offer with a wide range of sizes available to choose from.
[Feature]
● Belt Width Minimum / Maximum (mm.) : 10 mm. and 500 mm. (can be increased by increments 1 mm.)
● Thickness (mm.): 0.9, 1.0, 1.1, 1.5 and 2
● Belt Length (m.) : The size is configurable between 0.7 to 20 m, and the minimum length can be increased by increments 0.01 m.
● Suitable for Minimum Pulley Belt Diameter Size (mm.) 10 and 30
● Surface Cover Material: PVC and Urethane
● Color: White, Green and Black
[Application]
It is used in conjunction with pulleys to transfer materials in a conveyor system.
- RoHS
Part Number
Configured Part Number is shown.
Economy Flat Belts for Sliding
Customizable Durable Quiet
- Perfect for transporting various materials with ease.
- Choose from customizable widths and lengths to fit your needs.
- Made from durable materials for reliable performance in various applications.
- Designed to minimize noise, enhancing the quietness of your system.
- Available in multiple colors and surface textures to match your requirements.
MISUMI Standard
Cheaper Price
Product Variety
3D CAD Support
Product Overview
A flat belt, Conveyor Belt is a belt with a rectangular cross-section. Depending on material features, number of layers, color, and surface shape, it can transfer workpieces such as food, electronic parts, and corrugated cardboards, and is widely used in various fields and industries.
Dimensional Drawing
Specification Overview
| Type |  Material | Color | Surface Shape | Number of Layers | Thickness mm | Minimum pulley diameter Φmm | Allowable tension N/mm | Unit weight kg/㎡ | Coefficient of friction (reference value for ground steel) | Knife edge | Continuous Operating Temperature °C | ||
| Surface | Rear | Surface | Rear | ||||||||||
| CFBUG | Polyurethane (PU) | Polyester canvas | Green | Glossy surface | 1 | 0.9 | 10 | 4 | 0.9 | 0.4 | 0.1 | R4 | -20~80 |
| CFBUM | Matt surface | 1 | 0.9 | 10 | 4 | 0.9 | 0.4 | 0.1 | R4 | -20~80 | |||
| CFBUW | White | 1 | 0.9 | 10 | 4 | 0.9 | 0.4 | 0.1 | R4 | -20~80 | |||
| CFBUWH | 1 | 1.1 | 10 | 4 | 1.2 | 0.4 | 0.1 | R4 | -20~80 | ||||
| CFBUGD | Green | 2 | 1.5 | 30 | 6 | 1.7 | 0.4 | 0.1 | - | -20~80 | |||
| CFBUBD | Black | 2 | 1.5 | 30 | 6 | 1.7 | 0.4 | 0.1 | - | -20~80 | |||
| CFBVG | Polyvinyl Chloride (PVC) | Polyester canvas | Green | Glossy surface | 1 | 1.0 | 10 | 4 | 1.1 | 0.5 | 0.2 | R5 | -5~80 |
| CFBVW | White | 1 | 1.0 | 10 | 4 | 1.1 | 0.5 | 0.2 | R5 | -5~80 | |||
| CFBVGD | Green | 2 | 2.0 | 30 | 6 | 2.3 | 0.5 | 0.2 | - | -5~80 | |||
| CFBVWD | White | Matt surface | 2 | 2.0 | 30 | 6 | 2.3 | 1.0 | 0.2 | - | -5~80 | ||
The permanent stretch rate of the Conveyor Belt is 1% relative to the total length. (Reference value)At the time of shipment, fitting processing has been performed on the ribbon Conveyor Belt.Set the inner diameter as the circumference length.Please select the pulley model after confirming the width tolerance between the pulley and the idler.■ Width tolerance
| Width (mm) | Tolerance |
| ～100 | 0 ~ -2 |
| 101~400 | 0 ~ -2 |
| 401~500 | 0 ~ -3 |
■ Thickness Tolerance
| Thickness (mm) | Tolerance | Fitting Part Tolerance |
| ～1.0 | ±0.1 | ±0.3 |
| 1.1~1.5 | ±0.2 | |
| 1.6~2.0 |
■ Length Tolerance
| Length (mm) | Tolerance |
| ～2000 | ±10 |
| 2001~7000 | ±20 |
| 7001~10000 | ±0.3% |
| 10001～ | ±0.3% |
Specification Table
Please order after selecting part number and parameters according to the selection steps 
to 
.
At the time of shipment, fitting processing has been performed on the ribbon belt.
to 
. | Part Number Type | - |  Belt Width W (mm) | - | Circumference Length L (m) | ||||
| CFBUG | - | 350 | - | 4.23 | |||||
| Part Number of Conveyor Belt | Circumference Length Ⅼ(m) | |
| Type of Conveyor Belt | Belt Width W (mm) Can be specified down to 1mm increments | Can be specified down to 0.01m increments |
| CFBUG | 10~500 | 0.70~20.00 |
| CFBUM | ||
| CFBUW | ||
| CFBUWH | ||
| CFBUGD | ||
| CFBUBD | ||
| CFBVG | ||
| CFBVW | ||
| CFBVGD | ||
| CFBVWD | ||
At the time of shipment, fitting processing has been performed on the ribbon belt.Product Features
Features 1: complete specifications, widely used, available in a variety of colors and surface shapes
For general use: suitable for general conveying purposes of food packaging, cardboard boxes, metal, and plastic, etc.
For electronic parts: anti-static specifications, suitable for the transmission of anti-static electronic parts. The surface resistivity value is 10⁶～10⁸Ω.
For sliding: canvas with sliding performance in longitudinal direction is used to make the conveying objects stay and be arranged above the Conveyor Belt.
For conveying bulk materials: The surface is of textured shape, which can be used in horizontal transportation of bulk objects.
Feature 2: Can prevent both sides of the belt from being raised
For 1 layer of flat belt, the back is made of weaving with stronger rigidity to effectively prevent the belt from being raised on both sides.* Problems of products circulating on the market.
Feature 3: more layers and types are availableThe results of MISUMI Conveyor Belt installation test are for reference only.
For general use: suitable for general conveying purposes of food packaging, cardboard boxes, metal, and plastic, etc.
For electronic parts: anti-static specifications, suitable for the transmission of anti-static electronic parts. The surface resistivity value is 10⁶～10⁸Ω.
For sliding: canvas with sliding performance in longitudinal direction is used to make the conveying objects stay and be arranged above the Conveyor Belt.
For conveying bulk materials: The surface is of textured shape, which can be used in horizontal transportation of bulk objects.
 |  |  |  |  |  |  |  | |||||||
For general use | For general use | For general use | For electronic parts | For sliding | For sliding | For conveying bulk materials | For conveying bulk materials |
Feature 2: Can prevent both sides of the belt from being raised
For 1 layer of flat belt, the back is made of weaving with stronger rigidity to effectively prevent the belt from being raised on both sides.* Problems of products circulating on the market.
Feature 3: more layers and types are available
The results of MISUMI Conveyor Belt installation test are for reference only.Precautions
■ Performance attribute reference
Excellent 
Applicable 〇 May be corroded 
Not applicable 
Not suitable for unpackaged food transportation.
■ Conveyor Belt appearance list
| Part Number | Chemical resistance of covering layer | Tolerance to animal and vegetable oils | Flame Retardance | Water and heat resistance | Static resistance |
| Type | |||||
| CFBUG | 〇 | 〇 |  |  | |
| CFBUM | 〇 | 〇 | | | |
| CFBUW | 〇 | 〇 | | | |
| CFBUWH | 〇 | 〇 | | | |
| CFBUGD | 〇 | 〇 | | | |
| CFBUBD | 〇 | 〇 | | | |
| CFBVG | 〇 | | | 〇 | |
| CFBVW | 〇 | | | 〇 | |
| CFBVGD | 〇 | | | 〇 | |
| CFBVWD | 〇 |  | | 〇 | |
Applicable 〇 May be corroded Not applicable Not suitable for unpackaged food transportation.■ Conveyor Belt appearance list
Usage Method
■ Conveyor Belt, Flat belt tension adjustment
The suitable tension force of the flat belt depends on the structure of the conveyor, material, the weight of the goods, etc., so it can not be determined as a few percent.
Please do not over-tension as it is permanently tensioned. Please refer to the following method for adjusting method.
① Select a length of 1000mm and draw a mark on an inconspicuous part of the Conveyor Belt.
② Slowly tension the Conveyor Belt until the marking line reaches 1002mm.
③ Drive the Conveyor Belt in this state and confirm that the flat belt is not slipping. (If the flat belt deflects, then adjust it)
Carry out the transmission test after confirming no problems. If the transmission is smooth, you can continue to use the belt.
If the flat belt slips after the item is put on, perform Step ④.
④ When the Conveyor Belt slips, please tighten the flat belt slightly. Every time you need to confirm the slip until the flat belt does not slip.
Adjust the deviation and carry out the transmission test. Confirm smooth transmission before use.
⑤ It is recommended to check the tension state regularly.
■ Simple selection steps for Conveyor Belt
① Determine the necessary conditions for selection. (Maximum total weight of workpiece, pulley diameter, transmission power, etc.)
② Calculate the stress borne by the Conveyor Belt.
③ Choose the Conveyor Belt whose allowable stress is greater than the stress calculated in ②.
④ Confirm the oil resistance and chemical resistance of the belt, and confirm the sliding properties based on the coefficient of friction.
⑤ Determine the belt.
The suitable tension force of the flat belt depends on the structure of the conveyor, material, the weight of the goods, etc., so it can not be determined as a few percent.
Please do not over-tension as it is permanently tensioned. Please refer to the following method for adjusting method.
① Select a length of 1000mm and draw a mark on an inconspicuous part of the Conveyor Belt.
② Slowly tension the Conveyor Belt until the marking line reaches 1002mm.
③ Drive the Conveyor Belt in this state and confirm that the flat belt is not slipping. (If the flat belt deflects, then adjust it)
Carry out the transmission test after confirming no problems. If the transmission is smooth, you can continue to use the belt.
If the flat belt slips after the item is put on, perform Step ④.
④ When the Conveyor Belt slips, please tighten the flat belt slightly. Every time you need to confirm the slip until the flat belt does not slip.
Adjust the deviation and carry out the transmission test. Confirm smooth transmission before use.
⑤ It is recommended to check the tension state regularly.
■ Simple selection steps for Conveyor Belt
① Determine the necessary conditions for selection. (Maximum total weight of workpiece, pulley diameter, transmission power, etc.)
② Calculate the stress borne by the Conveyor Belt.
③ Choose the Conveyor Belt whose allowable stress is greater than the stress calculated in ②.
④ Confirm the oil resistance and chemical resistance of the belt, and confirm the sliding properties based on the coefficient of friction.
⑤ Determine the belt.
Example of Use
■ Packaging, cardboard boxes, metal, plastic and other general conveying purposes
Equipment name: parallel (same direction) Conveyor Belt transfer device
Intended use: move the workpiece between parallel conveyor belts, and make it go forward in the same direction
Equipment name: parallel (same direction) Conveyor Belt transfer device
Intended use: move the workpiece between parallel conveyor belts, and make it go forward in the same direction
Application Industries
| Smart phone | Food | Electronic & Electrical Appliances | ||
 |  |  | ||
| Solar cell | Semiconductor | LCD | ||
 |  |  |
Related Products
| Urethane round Conveyor Belt, welded joint product, free end product, hollow rope type | Conveyor Belt, with anti-running rib | Conveyor Belt, flat belt with anti-running rib and single row middle drive, φ30 | ||
 |  |  | ||
| Typical model: MBT5-150 | Typical model: HBLTDS350-4.5 | Typical model: CVGP-100-1000-25-TA220-IM-25-H-A | ||
| Reasons for recommendation: rich specifications, excellent quality | Reasons for recommendation: anti-running rib design | Reasons for recommendation: anti-running rib models effectively prevent deviation |
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| CFBVG-[10-500/1]-[0.7-20/0.01] |
| CFBVGD-[10-500/1]-[0.7-20/0.01] |
| CFBVW-[10-500/1]-[0.7-20/0.01] |
| CFBVWD-[10-500/1]-[0.7-20/0.01] |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Surface Cover Material | Surface Cover Color | Surface Cover Shape | No. of Plies | Thickness (mm) | Belt Width W (mm) | Circumference Length L (m) |
|---|---|---|---|---|---|---|---|---|---|---|---|
- | 2 Piece(s) | 8 Day(s) | [Vinyl Chloride] PVC | [Green] Green | [Rough Top] Glossy Surface | 1-ply | 1 | 10 ～ 500 | 0.7 ～ 20 | ||
- | 2 Piece(s) | 8 Day(s) | [Vinyl Chloride] PVC | [Green] Green | [Rough Top] Glossy Surface | 2-ply | 2 | 10 ～ 500 | 0.7 ～ 20 | ||
- | 2 Piece(s) | 8 Day(s) | [Vinyl Chloride] PVC | White | [Rough Top] Glossy Surface | 1-ply | 1 | 10 ～ 500 | 0.7 ～ 20 | ||
- | 2 Piece(s) | 8 Day(s) | [Vinyl Chloride] PVC | White | Matte | 2-ply | 2 | 10 ～ 500 | 0.7 ～ 20 |
Loading...
Basic Information
| Belt Specifications | General Purpose / For Mini Belt Conveyor | Tension Member Material | Polyester Canvas |
|---|
Specification/Dimensions
-
Surface Cover Color
- White
- Green
- Black
-
Surface Cover Shape
- Matte
- Rough Top
-
Thickness(mm)
-
Belt Width W(mm)
-
Circumference Length L(m)
-
type
- CFBUG
- CFBUGD
- CFBUM
- CFBUW
- CFBUWH
- CFBVG
- CFBVGD
- CFBVW
- CFBVWD
-
Surface Cover Material
- Polyurethane
- Vinyl Chloride
- Polyurethane
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 8 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Frequently asked question (FAQ)
- Question: In what state is the flat belt shipped?
- Answer: All are shipped after joints are processed for the belts.
- Question: Flat belt joint will be thicker than the body part, is it normal?
- Answer: It is normal, the belt joint will become thicker due to processing.
- Question: How is the circumference length of the flat belt calculated?
- Answer: Set the inner diameter as the circumference length.
- Question: What is the width tolerance of the flat belt?
- Answer: For products with a width of less than 400mm, the tolerance is ±1mm, and for products with a width of 401 to 500mm, the tolerance is ±1.5mm.
- Question: The flat belt joint is broken and the crack is flush, is it a joint processing problem?
- Answer: If the joint is poorly processed, it will generally break along the gap. Generally, the crack is flush and it is considered to be the fracture caused by excessive tension. It is recommended that the customer adjust the tension.
Additional Products in this Category
- Flat Belts-Food Transfer
- Flat Belts with Crosspieces
- HabaFLOW, High Performance Conveyor Belt, H-4EMDT
- HabaFLOW, High Performance Conveyor Belt, H-6EHDT
- High Guard Anti-Bacteria and Anti-Mold Belt F-5EXWT+H15
- HabaFLOW Food Conveyor Belt FNT-5MRWH-P1
- Mamaline Tailorbelt-U Mirrored Surface, Low Shrinkage, Antibacterial, Antifungal
- Mamaline Tailorbelt-U Non-Adhesive, Fluorine Coating
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy