(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Pivot Pins Shouldered With Retaining Ring Groove (C-HCDG5-10)
- Volume Discount
- RoHS
Part Number
Configured Part Number is shown.
C-HCDG5-10
Product Overview of Hinge Pins
The Hinge Pins can be used as the pivot point of various rotary connection mechanisms. The pivot point is similar to the axis of a hinge, and the connected parts can make rotary movements.
Product Feature of Hinge Pins
Feature 1: Hinge Pins has a tolerance of -0.02 and is used in conjunction with bearings.
Feature 2: About 50% cheaper than MISUMI standard (high quality) Hinge Pins.
Feature 3: Appropriate specifications can be selected according to the conditions of use.
Feature 2: About 50% cheaper than MISUMI standard (high quality) Hinge Pins.
Feature 3: Appropriate specifications can be selected according to the conditions of use.
Dimensional Drawing of Hinge Pins
D tolerance is limited to the L dimension range. Others are general tolerances.Specifications Overview of Hinge Pins
・Material Specification table of Hinge Pins
The product of Hinge Pins does not come with a retaining ring. For retaining ring models, please refer to Dimension specification table.
If there are requirements for rust prevention, give priority to high-quality hinge pins.
| Type of Hinge Pins | D[Φ:mm] |  Material |  Hardness |  Surface Treatment |  Accessories |
| C-HCDG | 3~10 | S45C Equivalent | - | Ferroferric Oxide Protective Film | - |
The product of Hinge Pins does not come with a retaining ring. For retaining ring models, please refer to Dimension specification table.If there are requirements for rust prevention, give priority to high-quality hinge pins.Precautions of Hinge Pins
① D tolerance is limited to the L dimension range. Others are general tolerances.
② Anti-rust specification selection and maintenance
If there are requirements for rust prevention, give priority to high-quality hinge pins.
Products without surface treatment need to be applied antirust oil regularly for maintenance.
③ This product of Hinge Pins does not come with retaining rings.
② Anti-rust specification selection and maintenance
If there are requirements for rust prevention, give priority to high-quality hinge pins.
Products without surface treatment need to be applied antirust oil regularly for maintenance.
③ This product of Hinge Pins does not come with retaining rings.
Example Use of Hinge Pins
Equipment Name:
Rotary type stopper mechanism
Design Purpose:
The use of a connecting rod mechanism can reduce the size of the stopper on the conveyor for transmission.
Parts Application Description:
Hinge Pins and hinge base are used in conjunction to realize the swing motion of the connecting rod mechanism.
Rotary type stopper mechanism
Design Purpose:
The use of a connecting rod mechanism can reduce the size of the stopper on the conveyor for transmission.
Parts Application Description:
Hinge Pins and hinge base are used in conjunction to realize the swing motion of the connecting rod mechanism.
Application Industries of Hinge Pins
| Electronic & Electrical Appliances | Automotive | Lithium battery | ||
 |  |  | ||
| Robotics | Smart phone | Semiconductor | ||
 |  |  |
Related Products of Hinge Pins
| Adjustment Screw Components Hex Socket on Head | Single Bearing Type with Retaining Ring Embedded | Packed Gasket Ring Fixed/Gasket Ring | ||
 |  |  | ||
| Typical model of Hinge Pins: ANB8-40 | Typical model of Hinge Pins: BGRR6000ZZ | Typical model of Hinge Pins: PCIMR6-12-0.1 |
Specification Table of Hinge Pins
 | Part Number of Hinge Pins | - | L | |
| C-HCDG8 | - | 30 |
Material Specification Table of Hinge Pins
| Type of Hinge Pins | Equivalent material | Hardness | Surface Treatment | Accessories |
| C-HCDG | S45C | - | Ferroferric Oxide Protective Film | - |
Dimension Specification Table of Hinge Pins
| Part Number of Hinge Pins |  L(Fixed Size Selection) | M | N | u | (n) | d | T | H | Retaining ring | |||||||||||||||
 Type |  D | |||||||||||||||||||||||
| Tolerance | Shape | JIS Nominal Specifications | ||||||||||||||||||||||
| C-HCDG | 3 | 0 -0.02 | 8 | 10 | 12 | 15 | 16 | 18 | 0.5 | 2 | 2.9 | 1.5 | 2 | 1.5 | 5.5 | E Type | No.2 | |||||||
| 4 | 8 | 10 | 12 | 15 | 16 | 18 | 20 | 0.7 | 3.9 | 3 | 6.5 | No.3 | ||||||||||||
| 5 | 10 | 12 | 15 | 16 | 18 | 20 | 4.9 | 4 | 8 | No.4 | ||||||||||||||
| 6 | 15 | 16 | 18 | 20 | 22 | 24 | 25 | 30 | 5.8 | 5 | 9 | No.5 | ||||||||||||
| 8 | 20 | 22 | 24 | 25 | 30 | 35 | 40 | 0.9 | 3 | 7.8 | 7 | 2 | 12 | No.7 | ||||||||||
| 10 | 25 | 30 | 35 | 40 | 1.15 | 9.8 | 9.6 | 14 | C Type | No.10 | ||||||||||||||
For JIS engineering specifications of the supplied retaining ring, refer to Retaining Ring Specifications.Specification Table
 | Part Number | - | L | |
| C-HCDG8 | - | 30 |
Material Specification Table
| Type |  Equivalent material |  Hardness |  Surface Treatment |  Accessories |
| C-HCDG | S45C | - | Ferroferric Oxide Protective Film | - |
Dimension Specification Table
| Part Number |  L(Fixed Size Selection) | M | N | u | (n) | d | T | H | Retaining ring | |||||||||||||||
 Type |  D | |||||||||||||||||||||||
| Tolerance | Shape | JIS Nominal Specifications | ||||||||||||||||||||||
| C-HCDG | 3 | 0 -0.02 | 8 | 10 | 12 | 15 | 16 | 18 | 0.5 | 2 | 2.9 | 1.5 | 2 | 1.5 | 5.5 | E Type | No.2 | |||||||
| 4 | 8 | 10 | 12 | 15 | 16 | 18 | 20 | 0.7 | 3.9 | 3 | 6.5 | No.3 | ||||||||||||
| 5 | 10 | 12 | 15 | 16 | 18 | 20 | 4.9 | 4 | 8 | No.4 | ||||||||||||||
| 6 | 15 | 16 | 18 | 20 | 22 | 24 | 25 | 30 | 5.8 | 5 | 9 | No.5 | ||||||||||||
| 8 | 20 | 22 | 24 | 25 | 30 | 35 | 40 | 0.9 | 3 | 7.8 | 7 | 2 | 12 | No.7 | ||||||||||
| 10 | 25 | 30 | 35 | 40 | 1.15 | 9.8 | 9.6 | 14 | C Type | No.10 | ||||||||||||||
For JIS engineering specifications of the supplied retaining ring, refer to Retaining Ring Specifications.Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Basic Information
| Environmentally friendly | RoHS Compliant (10 Substances) | Mounting Method | Retaining Ring | Characteristics/Applications | Not Applicable |
|---|---|---|---|---|---|
| Basic Shape | Shouldered | Material | Steel | Hardness | Not Spec-designed |
| Surface Treatment | Black Oxide | Material Details | S45C Equivalent | Material Detail | S45C Equivalent |
| Type | L Dimension Fixed | Hex Socket | N/A | Surface Treatment | Ferroferric Oxide Protective Film |
Please check the type/dimensions/specifications of the part C-HCDG5-10 in the Pivot Pins Shouldered With Retaining Ring Groove series.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Frequently asked question (FAQ)
- Question: How to avoid rusting of hinge pins?
-
Answer:
If there are requirements for rust prevention, give priority to high-quality hinge pins
Products without surface treatment need to be applied antirust oil regularly for maintenance, so as to extend antirust time. - Question: Can you provide the accessory retaining ring model?
- Answer: For specifications of the supplied retaining ring, please refer to Retaining Ring Specifications.
- Question: Does the width dimension of the relief groove on the shoulder and neck exceed the tolerance?
- Answer: The dimension of the relief groove on the shoulder and neck is a reference value.
- Question: Why are retaining rings missing in the delivered hinge pins?
- Answer: Economy series hinge pins do not come with retaining rings.
Products like this...
| Part Number |
|---|
| C-HCDG10-40 |
| C-HCDG3-10 |
| C-HCDG3-12 |
| C-HCDG5-12 |
| C-HCDG5-15 |
| C-HCDG5-16 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Shaft Dia. D (mm) | L Dimension (mm) |
|---|---|---|---|---|---|---|
MYR 6.00 | 1 Piece(s) | Available | 1 Day(s) | 10 | 40 | |
MYR 2.57 | 1 Piece(s) | Available | 1 Day(s) | 3 | 10 | |
MYR 2.57 | 1 Piece(s) | Available | 1 Day(s) | 3 | 12 | |
MYR 4.13 | 1 Piece(s) | Available | 1 Day(s) | 5 | 12 | |
MYR 4.13 | 1 Piece(s) | Available | 1 Day(s) | 5 | 15 | |
MYR 4.13 | 1 Piece(s) | Available | 1 Day(s) | 5 | 16 |
Additional Products in this Category
- Pivot Pins - Lock Nut with Hex Socket Head
- Pivot Pins - Both Ends Tapped
- Pivot Pins - Both Ends Threaded
- Precision Pivot Pins - Retaining Rings
- Pivot Pins Straight With Retaining Ring Grooves
- [Clean & Pack] Pivot Pin - Hex Socket, Shouldered, Lock Nut
- Pivot Pins Shaft Diameter Tolerance Selectable
- Forged Pivot Pin - Shouldered, Retaining Ring [RoHS Compliant]
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy