(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Heavy Load Aluminum Hinges Tapered Hole Asymmetric Type (C-HHDLS8-5)
- Volume Discount
- RoHS
Part Number
Configured Part Number is shown.
C-HHDLS8-5
Product Overview of Flat Hinges
Economy series Heavy load aluminum Flat Hinges Countersunk hole Special-shaped hole type This series products are heavy load aluminum Flat Hinges, countersunk hole and special-shaped hole type butterfly hinges, with clear anodizing surface treatment.
Note: Among Flat Hinges with the same dimensions and specifications in this series, there are small aluminum ones with lighter loads available for selection. For details, refer to the relevant products
Note: Among Flat Hinges with the same dimensions and specifications in this series, there are small aluminum ones with lighter loads available for selection. For details, refer to the relevant products
Usage Method of Flat Hinges
According to the weight of the door body where the hinge is mounted, the load-carrying capacity of the Flat Hinges can be calculated.
Determine the utilization direction first, and calculate according to the length and width of the door body.
Determine the utilization direction first, and calculate according to the length and width of the door body.
| Utilization Method of Flat Hinges | Lengthwise Utilization | Lateral Utilization | |
| A=2XB | A≠2XB | - | |
 |  |  | |
| Allowable Load Calculation Formula | Allowable Load =W | Allowable Load =W(B/A)*2 | Allowable Load =W |
Specifications Overview of Flat Hinges
Product Material and Surface Treatment Overview of Flat Hinges:
| Type of Flat Hinges |  Material |  Surface Treatment |
| C-HHDLS | A6063-T5 Bushing: Stainless Steel | Alumite Treatment |
Example Use of Flat Hinges
Depending on the profile to be fixed, the selectable of Flat Hinges specifications can be determined by the allowable load weight.For details, refer to the following table for the applicable hinge model.
Flat Hinges Common combinations of aluminum profiles can be confirmed and found from the table below.
Flat Hinges Common combinations of aluminum profiles can be confirmed and found from the table below.
| Representative Dimensional Drawing | Type of Matching Profile | Suitable Profile | * Allowable Load | Product Model | Surface Treatment | Mounting Pitch S mm | |
| KG | N | ||||||
 | Profile of the Same Size on Two Sides | Link 20/20 Profile | 8 | 78 | C-HHFL5 | Clear Anodized | 21 |
| C-HHBFL5 | Black Anodized | ||||||
| 10 | 98 | HHPSN5 | Clear Anodized | ||||
| HHPBSN5 | Black Anodized | ||||||
| 20 | 196 | C-HHDL5 | Clear Anodized | ||||
| C-HHBDL5 | Black Anodized | ||||||
| Link 30/30 Profile | 8 | 78 | C-HHFL6 | Clear Anodized | 32 | ||
| C-HHBFL6 | Black Anodized | ||||||
| 10 | 98 | HHPSN6 | Clear Anodized | ||||
| HHPBSN6 | Black Anodized | ||||||
| 20 | 196 | C-HHDL6 | Clear Anodized | ||||
| C-HHBDL6 | Black Anodized | ||||||
| Link 40/40 Profile | 8 | 78 | C-HHFL8 | Clear Anodized | 42 | ||
| C-HHBFL8 | Black Anodized | ||||||
| 10 | 98 | HHPSN8 | Clear Anodized | ||||
| HHPBSN8 | Black Anodized | ||||||
| 20 | 196 | C-HHDL8 | Clear Anodized | ||||
| C-HHBDL8 | Black Anodized | ||||||
| Link 45/45 Profile | 12 | 118 | C-HHFL8-45 | Clear Anodized | 47 | ||
| C-HHBFL8-45 | Black Anodized | ||||||
| 15 | 147 | HHPSN8-45 | Clear Anodized | ||||
| HHPBSN8-45 | Black Anodized | ||||||
| 30 | 294 | C-HHDL8-45 | Clear Anodized | ||||
| C-HHBDL8-45 | Black Anodized | ||||||
Profile with Different Sizes on Two Sides | Link 20/30 Profile | 8 | 78 | C-HHFLS6-5 | Clear Anodized | 26.5 | |
| 10 | 98 | HHPSF6-5 | |||||
| 20 | 196 | C-HHDLS6-5 | |||||
| Link 30/40 Profile | 8 | 78 | C-HHFLS8-5 | 31.5 | |||
| 10 | 98 | HHPSF8-5 | |||||
| 20 | 196 | C-HHDLS8-5 | |||||
| Link 20/45 Profile | 8 | 78 | C-HHFLS845-5 | 34 | |||
| 10 | 98 | HHPSF845-5 | |||||
| 20 | 196 | C-HHDLS845-5 | |||||
| Link 20/40 Profile | 12 | 118 | C-HHFLS8-6 | 37 | |||
| 15 | 147 | HHPSF8-6 | |||||
| 30 | 294 | C-HHDLS8-6 | |||||
| Link 30/45 Profile | 12 | 118 | C-HHFLS845-6 | 39 | |||
| 15 | 147 | HHPSF845-6 | |||||
| 30 | 294 | C-HHDLS845-6 | |||||
Precautions of Flat Hinges
To install the hinge on the panel, etc., it is recommended to choose the nut for the butterfly Flat Hinges. For details, you can search TPYE: HHPNT or HHPFNT in the website to choose according to the size requirements.
Product Feature of Flat Hinges
of Flat Hinges, This series products are interchangeable with light load products in size to meet the structural requirements of different parts of the equipment.
Dimensional Drawing of Flat Hinges
Refer to the Specification Table below for detailed product dimensions
Specification Table of Flat Hinges
| Part Number | * Allowable Load | Weight | L | W | K | P | J | S | N | T | E | R | |||
| Type | No. | kg | N | Through Hole | Counterbored Hole | ||||||||||
| C-HHDLS Clear Anodized | 6-5 | 8 | 78 | 33 | 47 | 44 | 8.5 | 30 | 8 | 26.5 | 5.5 | 11 | 3.5 | 6 | 5.5 |
| 6.5 | 13 | ||||||||||||||
| 8-5 | 8 | 78 | 52 | 63 | 55 | 13 | 37 | 10 | 31.5 | 5.5 | 11 | 3.5 | 6 | 5.5 | |
| 6.5 | 13 | ||||||||||||||
| 845-5 | 8 | 78 | 52 | 63 | 55 | 13 | 37 | 7.5 | 34 | 5.5 | 11 | 3.5 | 6 | 5.5 | |
| 6.5 | 13 | ||||||||||||||
| 8-6 | 12 | 118 | 55 | 63 | 62 | 13 | 37 | 10 | 37 | 6.5 | 13 | 3.5 | 6 | 5.5 | |
| 845-6 | 12 | 118 | 55 | 63 | 62 | 13 | 37 | 8 | 39 | 6.5 | 13 | 3.5 | 5.5 | ||
Dimensional Drawing
Refer to the Specification Table below for detailed product dimensions
Specification Table
| Part Number | * Allowable Load | Weight | L | W | K | P | J | S | N | T | E | R | |||
| Type | No. | kg | N | Through Hole | Counterbored Hole | ||||||||||
| C-HHDLS Clear Anodized | 6-5 | 8 | 78 | 33 | 47 | 44 | 8.5 | 30 | 8 | 26.5 | 5.5 | 11 | 3.5 | 6 | 5.5 |
| 6.5 | 13 | ||||||||||||||
| 8-5 | 8 | 78 | 52 | 63 | 55 | 13 | 37 | 10 | 31.5 | 5.5 | 11 | 3.5 | 6 | 5.5 | |
| 6.5 | 13 | ||||||||||||||
| 845-5 | 8 | 78 | 52 | 63 | 55 | 13 | 37 | 7.5 | 34 | 5.5 | 11 | 3.5 | 6 | 5.5 | |
| 6.5 | 13 | ||||||||||||||
| 8-6 | 12 | 118 | 55 | 63 | 62 | 13 | 37 | 10 | 37 | 6.5 | 13 | 3.5 | 6 | 5.5 | |
| 845-6 | 12 | 118 | 55 | 63 | 62 | 13 | 37 | 8 | 39 | 6.5 | 13 | 3.5 | 5.5 | ||
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Basic Information
| Flat Hinge Type | Square Plate Type | Body Material | A6063 | Main Body Type | Flag Hinge |
|---|---|---|---|---|---|
| Operating Environment | Standard | Mounting Method | Screw Mounting | Additional Function | Not Provided |
| Mounting Screw Hole Type | Countersink | Main Body Surface Treatment | Clear Anodizing |
Please check the type/dimensions/specifications of the part C-HHDLS8-5 in the Heavy Load Aluminum Hinges Tapered Hole Asymmetric Type series.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Frequently asked question (FAQ)
- Question: What are the differences between standard-shaped and special-shaped hole products, and how to distinguish them in use?
- Answer: Standard-shaped products are those with the same opening sizes on the left and right pages, while the special-shaped hole is the structure with different opening sizes on the left and right pages, one large and one small. The purpose of the special-shaped hole structure is to flexibly use when connecting aluminum profiles of different sizes. For detailed description, refer to examples of use.
- Question: Are the nuts for butterfly hinge mentioned in the Precautions necessarily required?
- Answer: When installed on aluminum profiles, the recommended nuts are not necessarily required and separate small nuts can be used for fixing. However, the nuts are required as fixing parts for support when installed on panels, because generally panels are relatively thin and screws cannot be used for locking and fixing.
Products like this...
| Part Number |
|---|
| C-HHDLS6-5 |
| C-HHDLS8-6 |
| C-HHDLS845-5 |
| C-HHDLS845-6 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Length (mm) | Width (W) (mm) | Allowable Load (N) | Mounting Pitch S (mm) |
|---|---|---|---|---|---|---|---|---|
MYR 16.56 | 1 Piece(s) | Available | 1 Day(s) | 47 | 44 | 196 | 26.5 | |
MYR 19.33 | 1 Piece(s) | Available | 5 Day(s) | 63 | 62 | 294 | 37 | |
MYR 19.33 | 1 Piece(s) | Available | 1 Day(s) | 63 | 55 | 196 | 34 | |
MYR 19.33 | 1 Piece(s) | Available | 1 Day(s) | 63 | 62 | 294 | 39 |
Additional Products in this Category
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy