(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Shaft Collars Clamp Type For Bearing Inner Mount
- Volume Discount
- RoHS
Part Number
Configured Part Number is shown.
Economy Aluminum Shaft Collar for Bearing Inner Mount
Lightweight Rust Resistant Secure
- Designed for shafts with a range of diameters, ensuring versatile use.
- Clamp design provides superior holding force compared to set screw types.
- Crafted from aluminum with a surface finish for lightweight and rust-resistant performance.
- Offered at a lower cost than standard products, making it a cost-effective solution.
- Available for same-day shipping to meet urgent needs.
MISUMI Standard
Cheaper Price
Product Variety
3D CAD Support
Product Overview of Shaft Collars
Shaft Collars can be used as the inner ring pressing ring of bearing. Compared with the special nut for the bearing, special tools are not required and the cost performance is high.
MISUMI Original Specifications of Shaft Collars: the outer ring is additionally grooved, and aluminum material can realize high holding force.
MISUMI Original Specifications of Shaft Collars: the outer ring is additionally grooved, and aluminum material can realize high holding force.
Product Feature of Shaft Collars
Feature 1: the Shaft Collars is fixed on one side of the rotating part and used for axial fixing of the rotating part.
Feature 2: the Shaft Collars is fixed at one end of the rotary shaft, and the boss part is tightly attached to inner ring of the bearing to play the role of bearing positioning.
Feature 3: two Shaft Collars are clamped and fixed at both ends of the part on the shaft, and the front and rear positions of the part are adjustable, so that the two Shaft Collars are used for axial positioning of the part.
Feature 4: the slit type has stronger fastening force than the set screw type Shaft Collars.
Feature 5: aluminum material is adopted to meet the lightweight requirements.
Feature 2: the Shaft Collars is fixed at one end of the rotary shaft, and the boss part is tightly attached to inner ring of the bearing to play the role of bearing positioning.
Feature 3: two Shaft Collars are clamped and fixed at both ends of the part on the shaft, and the front and rear positions of the part are adjustable, so that the two Shaft Collars are used for axial positioning of the part.
Feature 4: the slit type has stronger fastening force than the set screw type Shaft Collars.
Feature 5: aluminum material is adopted to meet the lightweight requirements.
Dimensional Drawing of Shaft Collars
Specifications Overview of Shaft Collars
| Type of Shaft Collars |  Material |  Surface Treatment |  Accessories | D (mm) | Ds selection (mm) | B (mm) |
| C-SCSBNAW | 6000 series aluminum | Clear Anodized | 1 hexagon socket head bolt (equivalent to SCM435) | 6~30 | 9~35 | 9~17.5 |
Usage Method of Shaft Collars
The bearing is fixed at one end ofthe shaft by a Shaft Collars, and the boss part abuts against the inner ring of bearing to play the role of positioning the bearing.Example Use of Shaft Collars
■Mechanism name of Shaft Collars
Cleaning mechanism with adjustable spray angle.
■Mechanism functions of Shaft Collars
1. A mechanism for washing the workpieces sent from the conveyor with a nozzle.
2. The Shaft Collars can spray angle can be easily adjusted by the hand wheel and can be fixed at any angle.
■Function of Shaft Collars for bearing mounting
Fixed to one end of the rotary Shaft Collars, it abuts against the inner ring of the bearing to position the bearing.
Cleaning mechanism with adjustable spray angle.
■Mechanism functions of Shaft Collars
1. A mechanism for washing the workpieces sent from the conveyor with a nozzle.
2. The Shaft Collars can spray angle can be easily adjusted by the hand wheel and can be fixed at any angle.
■Function of Shaft Collars for bearing mounting
Fixed to one end of the rotary Shaft Collars, it abuts against the inner ring of the bearing to position the bearing.
Related Industries of Shaft Collars
| Smart phone | Medical | Electronic & Electrical Appliances | ||
 |  |  | ||
| Solar cell | Semiconductor | Lithium battery | ||
 |  |  |
Precautions of Shaft Collars
① If there are requirements for rust prevention of Shaft Collars, give priority to products with surface treatment of electroless nickel plating or those made of SUS304.
② Because the Shaft Collars is not hard, scars easily occur after collision. Keep it properly after removing the external package.
② Because the Shaft Collars is not hard, scars easily occur after collision. Keep it properly after removing the external package.
Related Products of Shaft Collars
| (Economy series) Shaft Collars Set Screw Type For Bearing Fixing | (Economy series) Rotary Shaft Collars Straight bar type | (Economy series) Linear guide Shaft Collars | ||
 |  |  | ||
| Typical model of Shaft Collars: SCSBR10-14 | Typical model of Shaft Collars: PSFHR20-300 | Typical model of Shaft Collars: CPSFJT20-325-M8 | ||
| Advantages of Shaft Collars: matching with shafts, complete variety | Advantages of Shaft Collars: various alterations, short delivery time | Advantages of Shaft Collars: economy series products, min. shipped in 1 day at the earliest |
Dimensional Drawing of Shaft Collars
Specification Table of Shaft Collars
Please order of Shaft Collars after selecting part number and parameters according to the selection steps 
to 
.
to 
. | Part Number (Type of Shaft Collars· D) | − | Ds | |
| C-SCSBNAW8 | − | 11 |
| Part Number | Ds Selection | b | B | D1 | M (Coarse Thread) | d | H | X | Y | (W) | C | |
| Type | D | |||||||||||
| C-SCSBNAW | 6 | 9 | 8 | 9 | 20 | M3 | 3.4 | 6 | 6 | 4 | 1 | 0.5 |
| 8 | 11 | 10 | 11.5 | 25 | M4 | 4.5 | 7.5 | 7 | 5 | 1.5 | ||
| 10 | 14 | 30 | 9 | |||||||||
| 12 | 16 | 30 | 10 | |||||||||
| 15 | 18 | 34 | 11.5 | 6 | ||||||||
| 20 | 25 | 12 | 14 | 40 | M5 | 5.5 | 9 | 14 | 7 | |||
| 25 | 29 | 45 | 17 | 10 | ||||||||
| 30 | 35 | 15 | 17.5 | 55 | M6 | 6.6 | 12 | 20 | 2 | 1 | ||
Dimensional Drawing
Specification Table
Please order after selecting part number and parameters according to the selection steps 
to 
.
to 
. | Part Number (Type· D) | − | Ds | |
| C-SCSBNAW8 | − | 11 |
| Part Number | Ds Selection | b | B | D1 | M (Coarse Thread) | d | H | X | Y | (W) | C | |
| Type | D | |||||||||||
| C-SCSBNAW | 6 | 9 | 8 | 9 | 20 | M3 | 3.4 | 6 | 6 | 4 | 1 | 0.5 |
| 8 | 11 | 10 | 11.5 | 25 | M4 | 4.5 | 7.5 | 7 | 5 | 1.5 | ||
| 10 | 14 | 30 | 9 | |||||||||
| 12 | 16 | 30 | 10 | |||||||||
| 15 | 18 | 34 | 11.5 | 6 | ||||||||
| 20 | 25 | 12 | 14 | 40 | M5 | 5.5 | 9 | 14 | 7 | |||
| 25 | 29 | 45 | 17 | 10 | ||||||||
| 30 | 35 | 15 | 17.5 | 55 | M6 | 6.6 | 12 | 20 | 2 | 1 | ||
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| C-SCSBNAW6-9 |
| C-SCSBNAW8-11 |
| C-SCSBNAW10-14 |
| C-SCSBNAW12-16 |
| C-SCSBNAW15-18 |
| C-SCSBNAW20-24 |
| C-SCSBNAW25-29 |
| C-SCSBNAW30-35 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | I.D. (mm) | O.D. (mm) | Width (mm) |
|---|---|---|---|---|---|---|---|
MYR 10.06 | 1 Piece(s) | Available | 1 Day(s) | 6 | 20 | 9 | |
MYR 11.43 | 1 Piece(s) | Available | 1 Day(s) | 8 | 25 | 11.5 | |
MYR 12.58 | 1 Piece(s) | Available | 1 Day(s) | 10 | 30 | 11.5 | |
MYR 12.58 | 1 Piece(s) | Available | 1 Day(s) | 12 | 30 | 11.5 | |
MYR 13.30 | 1 Piece(s) | Available | 1 Day(s) | 15 | 34 | 11.5 | |
MYR 16.56 | 1 Piece(s) | Available | 1 Day(s) | 20 | 40 | 14 | |
MYR 18.41 | 1 Piece(s) | Available | 1 Day(s) | 25 | 45 | 14 | |
MYR 16.21 | 1 Piece(s) | Available | 1 Day(s) | 30 | 55 | 17.5 |
Loading...
Basic Information
| Fastening Method | Slit | Specifications | For Bearing Mounting | Material | 6000 Series Aluminum Alloy |
|---|---|---|---|---|---|
| Surface Treatment | Clear Anodize | Thickness | Standard Type | Side Milling | Not Provided |
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Frequently asked question (FAQ)
- Question: What is the purpose of the shaft collar?
- Answer: The shaft collar can be used for common applications such as stopper, positioning, pulley fixing, etc., and can also be used for fixing the inner ring of a bearing; various parts such as fixing plates can also be installed by opening various mounting holes, and the types of the holes include through holes, screw holes and counterbored holes; meanwhile, it can also be used for installing a sensor or serving as a buffer, so that metal sounds caused by contact between metal parts are avoided; and finally, it can also be used for fixing the shaft end of a screw shaft.
- Question: Types of shaft collars?
- Answer: According to the connection method, the types can be divided into set screw, slit, split and handle.
- Question: Are the set screws of shaft collars supplied or do they need to be purchased separately?
- Answer: At present, the standard products sold by MISUMI are all supplied with set screws and do not need to be purchased separately.
- Question: Which type of shaft collars is easy to install and can be removed frequently?
- Answer: Handle type shaft collars.
- Question: Which type of shaft collars can be installed later, easy to maintain, easy to remove?
- Answer: Split shaft collars.
- Question: In order to avoid shaft damage when fixing the shaft, which types of shaft collars are recommended?
- Answer: Slit, split, handle.
- Question: Which parts sold by MISUMI do the shaft collars generally work with?
- Answer: We recommend that you use them with guide shafts, rotating shafts, round type posts, mounting bases, timing pulleys, etc.
- Question: What are the outer diameter tolerances of the shaft collar, guide shaft and rotating shaft, respectively, when they are used in combination?
- Answer: Guide shaft: O.D. tolerance g6, h5, f8; rotating shaft: O.D. tolerance g6, h7.
- Question: Do you have recommended models of shaft collars that sell well?
-
Answer:
Split: SCS SSCCN
Set screw: SCCN PSCCN - Question: Advantages of the MISUMI shaft collars?
-
Answer:
Short delivery time: almost all of them are available in stock, and can be shipped in 1 day
Drawings: both CAD and 3D drawings can be downloaded.
Dimension: I.D. can be selected from 3 to 100mm
Additional Products in this Category
- Shaft Collar - Compact Type with Clamp Lever - D Cut
- Shaft Collars Clamp Type
- Shaft Bracket, Normal Type, for Round Shaft
- Standard Slit Collar With Key Relief Groove / With 3 Holes
- Standard Separate Collar With Damper
- Set Collar [Steel] EA966C-35
- Set Collar [Stainless Steel] EA966CA-35
- Slit Collar [Steel] EA966CB-3
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy