(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Urethane Coated Cam Followers
- Volume Discount
MiSUMi Economy
(i)Caution
- Products with d ≥ 10 are being gradually switched over to specifications with through holes in the L dimension. Please take this into account prior to purchasing.
Part Number
Configured Part Number is shown.
Roller Followers Allowable load is the value when the speed is 10 km/h.
kgf＝N×0.101972
Roller Followers Do not use a hammer to directly hit the flange of the cam bearing during installation, otherwise it will cause poor rotation or fracture. Fix the inner hexagon with a hex socket wrench, then turn the nut with a wrench to tighten.
Bolt Tightening Torque
Do not exceed the maximum screw tightening torque when installing the cam follower. Otherwise, the threaded portion may be damaged.
Allowable load is the value when the speed is 10 km/h.
kgf＝N×0.101972
Specification Table
Allowable load is the value when the speed is 10 km/h.
kgf＝N×0.101972
Dimensional Drawing
Economy Urethane Coated Cam Followers
Noise Reduction High Load Capacity Enhanced Wear Resistance
- Coated with high-quality urethane (Shore A90) for superior durability. This coating enhances impact absorption and reduces friction, extending the lifespan of the cam follower in demanding applications.
- Designed to handle significant radial loads. Allows up to specified maximum allowable load depending on size.
- Urethane coating offers excellent wear resistance compared to metal cam followers. The urethane material helps in maintaining performance even under high-frequency use.
- Roller bearing with multiple size options
- Effective in reducing noise during operation. The urethane coating helps in dampening noise, making it ideal for environments where noise control is crucial.
MISUMI Standard
Cheaper Price
Product Variety
3D CAD Support
Roller Followers Product Overview
The Roller Followers coated with resin material has certain elasticity. When used as a conveying roller, the elastic sleeve can protect devices that come into contact with the sleeve during high-speed rotation, so it is particularly suitable for conveying fragile devices (such as semiconductors and LCD devices); and resin material is superior in corrosion resistance and wear resistance compared with metal, and when the cam follower is used as a guide roller to substitute a bearing, resin material is more wear-resistant than metal material, and its service life is longer. When the mating side is a curved surface, the contact frictional force between the surface of the resin material and the curved surface is greater, thus allowing the cam follower to swing with respect to the curved surface more stably without sliding. For example, sleeves made of nylon and urethane materials, compared with those made of traditional resin material, have greatly improved hardness while retaining the original excellent properties of elasticity, wear resistance, etc., thereby substituting traditional all-metal cam followers to a certain extent to carry out higher precision operations.
Roller Followers Product Feature
MISUMI's new Roller Followers product with greatly improved performance
1. MISUMI's embedded "Grooving" cam follower technology (patent pending). The traditional processing method is changed, and the problem that the resin outer ring is easy to fall off under the conditions of heavy load, partial load and high rotating speed is solved.
2. The test results of multi-angle load running simulation show that the degumming performance of the product is improved by more than 7 times compared with that of similar existing products. (*MISUMI test equipment)
Roller Followers Test Method
Try to make the inclination of the cam follower with resin as zero as possible.
【Roller Followers Material Features】
1. MISUMI's embedded "Grooving" cam follower technology (patent pending). The traditional processing method is changed, and the problem that the resin outer ring is easy to fall off under the conditions of heavy load, partial load and high rotating speed is solved.
2. The test results of multi-angle load running simulation show that the degumming performance of the product is improved by more than 7 times compared with that of similar existing products. (*MISUMI test equipment)
Roller Followers Test Method
Try to make the inclination of the cam follower with resin as zero as possible.【Roller Followers Material Features】
| Item | Urethane | MC Nylon |
| Load Resistant | △ | ○ |
| Abrasion Resistant | ○ | △ |
| Mechanical Strength | ○ | ◎ |
| Heat Resistance | × | △ |
| Chemical-Resistant | × | ○ |
Roller Followers Dimensional Drawing
| Roller Followers Type |  Roller Followers Material |  Roller Followers Accessories | |
| With seal | Urethane | Cam follower | |
| C－CFFRUA | Shore A90 | SUJ2 | 1 hexagon socket nut (S45C·ferroferric oxide protective film) |
■Hex socket on head (d5 to 8)
Operating environment at ambient temperature below 80 ℃ (reference).
No grease replenishing hole is provided for d16 and below.
Operating environment at ambient temperature below 80 ℃ (reference).No grease replenishing hole is provided for d16 and below.■ Hex Socket on Head Thread (d10~20)
 Roller Followers Type |  dh7 Tolerance |  D Selection | M×Pitch | B | B1 | L | Allowable Load (N) | Allowable Rotational Speed (RPM) |
| C－CFFRUA | 3 | 10 | 3×0.5 | 7 | 8 | 17 | 46 | 1560 |
| 4 | 12 | 4×0.7 | 8 | 9 | 20 | 63 | 1520 | |
| 5 | 13 | 5×0.8 | 9 | 10 | 23 | 75 | 1500 | |
| 6 | 16 | 6×1.0 | 11 | 12 | 28 | 99 | 1300 | |
| 8 | 19 | 8×1.25 | 32 | 106 | 1180 | |||
| 10 | 22 | 10×1.0 | 12 | 13 | 36 | 121 | 1060 | |
| 26 | 10×1.0 | 130 | 930 | |||||
| 12 | 30 | 12×1.5 | 14 | 15 | 40 | 162 | 830 | |
| 32 | 12×1.5 | 166 | 800 | |||||
| 16 | 35 | 16×1.5 | 18 | 19.5 | 52 | 222 | 740 | |
| 18 | 40 | 18×1.5 | 20 | 21.5 | 58 | 270 | 673 | |
| 20 | 52 | 20×1.5 | 24 | 25.5 | 66 | 312 | 524 |
Roller Followers Allowable load is the value when the speed is 10 km/h.kgf＝N×0.101972Roller Followers Usage Method
■ Types of Cam Followers
| Roller Followers Intended Use | Noise Proof Transmission | |
| FEATURES | Nylon Coated Type | Urethane Coated Type |
| Product Description |  |  |
| Type with resin press-fit into cam follower. Resin absorbs the impact of the matching side and plays a role in suppressing noise during rotation. | Type with urethane sintered on cam follower. Urethane absorbs the impact of the matching side and plays a role in suppressing noise during rotation. | |
Roller Followers Example of Use
Roller Followers Do not use a hammer to directly hit the flange of the cam bearing during installation, otherwise it will cause poor rotation or fracture. Fix the inner hexagon with a hex socket wrench, then turn the nut with a wrench to tighten.
Bolt Tightening Torque
Do not exceed the maximum screw tightening torque when installing the cam follower. Otherwise, the threaded portion may be damaged.
| dh7 | Maximum tightening torque N·m |
| 3 | 0.392 |
| 4 | 0.98 |
| 5 | 1.96 |
| 6 | 2.94 |
| 8 | 7.84 |
| 10 | 16.7 |
| 12 | 29.4 |
| 16 | 70.6 |
| 18 | 98 |
| 20 | 137 |
| 24 | 245 |
Roller Followers Precautions
· If the cam follower falls to the ground or is struck hard, it may be damaged.
· Attention should be paid to the fact that impact can cause functional damage, even if it is not visible.
· Cam followers are suitable for radial loads and less suitable for thrust loads, so avoid using methods such as applying thrust loads.
· Try to make the inclination of the cam follower with resin as zero as possible.
Roller Followers Specification Table· Attention should be paid to the fact that impact can cause functional damage, even if it is not visible.
· Cam followers are suitable for radial loads and less suitable for thrust loads, so avoid using methods such as applying thrust loads.
· Try to make the inclination of the cam follower with resin as zero as possible.
| Type | dh7 Tolerance | D Selection | M x pitch | B | B1 | L | Allowable Load (N) | Allowable Rotational Speed (RPM) |
| C－CFFRUA | 3 | 10 | 3×0.5 | 7 | 8 | 17 | 46 | 1560 |
| 4 | 12 | 4×0.7 | 8 | 9 | 20 | 63 | 1520 | |
| 5 | 13 | 5×0.8 | 9 | 10 | 23 | 75 | 1500 | |
| 6 | 16 | 6×1.0 | 11 | 12 | 28 | 99 | 1300 | |
| 8 | 19 | 8×1.25 | 32 | 106 | 1180 | |||
| 10 | 22 | 10×1.0 | 12 | 13 | 36 | 121 | 1060 | |
| 26 | 10×1.0 | 130 | 930 | |||||
| 12 | 30 | 12×1.5 | 14 | 15 | 40 | 162 | 830 | |
| 32 | 12×1.5 | 166 | 800 | |||||
| 16 | 35 | 16×1.5 | 18 | 19.5 | 52 | 222 | 740 | |
| 18 | 40 | 18×1.5 | 20 | 21.5 | 58 | 270 | 673 | |
| 20 | 52 | 20×1.5 | 24 | 25.5 | 66 | 312 | 524 |
Allowable load is the value when the speed is 10 km/h.kgf＝N×0.101972Roller Followers Dimensional Drawing
| Roller Followers Type | Roller Followers Material | Roller Followers Accessories | |
| With seal | Urethane | Cam follower | |
| C－CFFRUA | Shore A90 | SUJ2 | 1 hexagon socket nut (S45C ferroferric oxide protective film) |
■Hex socket on head (d5 to 8)
Roller Followers Operating environment at ambient temperature below 80 ℃ (reference).
Roller Followers No grease replenishing hole is provided for d16 and below.
Roller Followers Operating environment at ambient temperature below 80 ℃ (reference).Roller Followers No grease replenishing hole is provided for d16 and below.■ Hex Socket on Head Thread (d10~20)
 Type |  dh7 Tolerance |  D Selection | M x pitch | B | B1 | L | Allowable Load (N) | Allowable Rotational Speed (RPM) |
| C－CFFRUA | 3 | 10 | 3×0.5 | 7 | 8 | 17 | 46 | 1560 |
| 4 | 12 | 4×0.7 | 8 | 9 | 20 | 63 | 1520 | |
| 5 | 13 | 5×0.8 | 9 | 10 | 23 | 75 | 1500 | |
| 6 | 16 | 6×1.0 | 11 | 12 | 28 | 99 | 1300 | |
| 8 | 19 | 8×1.25 | 32 | 106 | 1180 | |||
| 10 | 22 | 10×1.0 | 12 | 13 | 36 | 121 | 1060 | |
| 26 | 10×1.0 | 130 | 930 | |||||
| 12 | 30 | 12×1.5 | 14 | 15 | 40 | 162 | 830 | |
| 32 | 12×1.5 | 166 | 800 | |||||
| 16 | 35 | 16×1.5 | 18 | 19.5 | 52 | 222 | 740 | |
| 18 | 40 | 18×1.5 | 20 | 21.5 | 58 | 270 | 673 | |
| 20 | 52 | 20×1.5 | 24 | 25.5 | 66 | 312 | 524 |
Allowable load is the value when the speed is 10 km/h.kgf＝N×0.101972Dimensional Drawing
| Type |  Material |  Accessories | |
| With seal | Urethane | Cam follower | |
| C－CFFRUA | Shore A90 | SUJ2 | 1 hexagon socket nut (S45C ferroferric oxide protective film) |
■Hex socket on head (d5 to 8)
Operating environment at ambient temperature below 80 ℃ (reference).
No grease replenishing hole is provided for d16 and below.
Operating environment at ambient temperature below 80 ℃ (reference).No grease replenishing hole is provided for d16 and below.■ Hex Socket on Head Thread (d10~20)
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| C-CFFRUA3-10 |
| C-CFFRUA4-12 |
| C-CFFRUA5-13 |
| C-CFFRUA6-16 |
| C-CFFRUA8-19 |
| C-CFFRUA10-22 |
| C-CFFRUA10-26 |
| C-CFFRUA12-30 |
| C-CFFRUA12-32 |
| C-CFFRUA16-35 |
| C-CFFRUA18-40 |
| C-CFFRUA20-52 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Outer Dia. D (mm) | Width B (mm) | Tightening Method | Allowable Rotational Speed (rpm) | Allowable Load (N) | Stud Screw Nominal Thread (M) (mm) |
|---|---|---|---|---|---|---|---|---|---|---|
MYR 94.77 | 1 Piece(s) | Available | 1 Day(s) | 10 | 7 | Hex Socket on Head | 2080 | 46 | 3×0.5 | |
MYR 95.37 | 1 Piece(s) | Available | 1 Day(s) | 12 | 8 | Hex Socket on Head | 1830 | 63 | 4×0.7 | |
MYR 73.66 | 1 Piece(s) | Available | 1 Day(s) | 13 | 9 | Hex Socket on Head | 1650 | 75 | 5×0.8 | |
MYR 70.86 | 1 Piece(s) | Available | 1 Day(s) | 16 | 11 | Hex Socket on Head | 1430 | 99 | 6×1.0 | |
MYR 70.23 | 1 Piece(s) | Available | 1 Day(s) | 19 | 11 | Hex Socket on Head | 1298 | 106 | 8×1.25 | |
MYR 71.28 | 1 Piece(s) | Available | 1 Day(s) | 22 | 12 | Hex Socket on Head Thread | 1166 | 121 | 10×1.0 | |
MYR 82.84 | 1 Piece(s) | Available | 6 Day(s) | 26 | 12 | Hex Socket on Head Thread | 1023 | 130 | 10×1.0 | |
MYR 83.84 | 1 Piece(s) | Available | 1 Day(s) | 30 | 14 | Hex Socket on Head Thread | 913 | 162 | 12×1.5 | |
MYR 90.16 | 1 Piece(s) | Available | 6 Day(s) | 32 | 14 | Hex Socket on Head Thread | 880 | 166 | 12×1.5 | |
MYR 107.65 | 1 Piece(s) | Available | 1 Day(s) | 35 | 18 | Hex Socket on Head Thread | 814 | 222 | 16×1.5 | |
MYR 118.45 | 1 Piece(s) | Available | 1 Day(s) | 40 | 20 | Hex Socket on Head Thread | 673 | 270 | 18×1.5 | |
MYR 160.84 | 1 Piece(s) | Available | 1 Day(s) | 52 | 24 | Hex Socket on Head Thread | 524 | 312 | 20×1.5 |
Loading...
Basic Information
| Product Category | Cam Followers | Roller Type | Flat Type | Cam Follower Type | Plastic |
|---|---|---|---|---|---|
| Size Standards | Metric System | Roller Follower Type | Urethane | Shaft | Provided |
| Roller Guiding Method | With Retainer | Seal | Provided | Application | Rolling Transmission Buffer |
Specification/Dimensions
-
Outer Dia. D(mm)
-
Width B(mm)
-
Tightening Method
-
Hex Socket on Head -
Hex Socket on Head Thread
-
-
Allowable Rotational Speed(rpm)
-
Allowable Load(N)
-
Stud Screw Nominal Thread (M)(mm)
- 3×0.5
- 4×0.7
- 5×0.8
- 6×1.0
- 8×1.25
- 10×1.0
- 12×1.5
- 16×1.5
- 18×1.5
- 20×1.5
-
type
- C-CFFRUA
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 1 Day(s) or Less
- 6 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Frequently asked question (FAQ)
- Question: Mounting Method
- Answer: Do not use a hammer to directly hit the flange of the cam bearing during installation, otherwise it will cause poor rotation or fracture. Fix the inner hexagon with a hex socket wrench, then turn the nut with a wrench to tighten. Do not exceed the maximum screw tightening torque when installing the cam follower. Otherwise, the threaded portion may be damaged.
- Question: Applicable load of cam follower
- Answer: It is applicable to radial load, but not very applicable to thrust load, so avoid using methods such as applying thrust load.
- Question: Usage difference of different O.D. shapes of outer ring
- Answer: The bearing with spherical outer ring can alleviate uneven load caused by installation problems. The contact area between the bearing with arc outer ring and the slide rail surface is large, suitable for slide rail surfaces with large load or low hardness.
Additional Products in this Category
- Cam Follower - Hex Socket on Head, Crowned
- Cam Followers Urethane-With Hexagon Socket/Flat Type/With Seal/No Seal
- Cam Followers with Brackets-Block
- Roller Followers-Separate/Crowned Type/With Seal/No Seal
- Cam Followers Straight Slot, Crown
- Full Double Row Cylinder Roller Type Cam Follower NUKR
- Roller Follower NATV
- Roller Follower (Multi-Sequence Cylindrical Roller)
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy