(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Press Fit Ball Plungers【10-20 Pieces Per Package】 (C-PFSSN8-10P)
Click this image to zoom it.
Move the mouse over the image to zoom
- Volume Discount
- Economy series Press Fit Ball Plungers
- Part number are series: C-PFSSN, C-PFSSR, C-PFPSN and C-PFPPN.
- Press Fit Ball Plungers type: Light Load and Heavy Load.
- Main Body Material: SUS303 and POM.
- Ball Material: SUS440C and POM.
- Ball Hardness: 50HRC.
- Spring Material: Stainless Steel SUS304.
- Press Fit Plungers Mounting Method: Press Fit.
- Coarse Thread Size (M): 3, 4, 5, 6, 8 and 10.
- Package Quantity: 10 and 20 PCS (Please check before order)
- No threaded hole required Short and light Easy to install.
- RoHS
Part Number
Configured Part Number is shown.
C-PFSSN8-10P
Economy Press Fit Ball Plunger (Stainless/POM)
- Wide Range Of Specifications For Different Needs
- High-Quality Stainless Steel Or Polyacetal Material
- Suitable For Equipment With High Surface Requirements
- Simple Installation With Press Fit Design
- Cost-Effective And Durable Solution
MISUMI Standard
Cheaper Price
Product Variety
3D CAD Support
Product Overview of Ball Plungers
·Ball Plungers, also known as ball point set screws, ball screws, positioning balls, touch balls, steel ball tightening spring screws, etc., can be used for temporary positioning and index adjustment of workpieces, relying on the spring to push out the front ball through a fixed stroke.
·The plunger body and ball are made of either stainless steel or polyacetal, available in four combinations.
·Note that the appearance and dimensional tolerances of the stainless steel body and the polyacetal body are slightly different. See the Specification Table for details.
Product Feature of Ball Plungers
·With no painting or coloring, they are suitable for more equipment with higher surface requirements.
·The Ball Plungers has a simple structure: the front ball is pushed out through a fixed stroke by the internal spring and it can be released by pressing in the ball against the elastic force.
·Flexible installation: Suitable for linear motion and rotary motion mechanisms with positioning requirements, the Ball Plungers can be installed using general threads, which facilitates assembly and disassembly.
·Suitable for fixture indexing, positioning, stop limit and other occasions.
Example Use of Ball Plungers
Usage Method of Ball Plungers
Ball Plungers, Apply adhesive before use to prevent it from falling off.
Precautions of Ball Plungers
·Ball Plungers, No anti-loosening treatment.
Related products of Ball Plungers
| (Economy series) Stainless Steel Standard Ball Plungers | (Economy series) Stainless Steel Long Ball Plungers | (Economy series) White Zinc-Plated Ball Plungers |
 |  |  |
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
| Part Number |
|---|
| C-PFSSN8-10P |
| Part Number | Standard Unit Price | Number of pc(s). included in pkg. | Minimum order quantity | Volume Discount | Days to Ship | Outer Dia. M (mm) | Stroke (S) (mm) | Ball Material | Body Material | Initial Load (N) | Max. Load (N) | Length L (mm) | Sale Type |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 23.32 | 10 Pieces Per Package | 1 Pack(s) | Available | 1 Day(s) | 8 | 2 | [Stainless Steel] SUS440C | [Stainless Steel] SUS303 | 7 | 11 | 9 | 10 pieces/bag |
Loading...
| Type | Body | Ball | Spring | ||
 Material | Material |  Hardness | Material | ||
| Light Load | C-PFSSN | SUS303 | SUS440C | 50HRC | SUS304 |
| Heavy Load | C-PFSSR | ||||
| Light Load | C-PFPSN | POM | |||
| C-PFPPN | POM | - | |||
Product Drawings
| Part Number | D1 | L | S | d | c | Light Load (N) | Heavy Load (N) | |||||
| Type | D | Package Quantity | SUS303 Body | POM Body | min. | max. | min. | max. | ||||
| C-PFSSN C-PFSSR C-PFPSN C-PFPPN | 3 | 20P | 3.6 | 4 | 0.8 | 0.6 | 2.38 | 0.8 | 2 | 4 | - | - |
| 4 | 4.6 | 5 | 1.1 | 0.9 | 3 | 0.8 | 3 | 5 | 3 | 10 | ||
| 5 | 5.6 | 6 | 1.4 | 1.2 | 4 | 1 | 4 | 7 | 5 | 10 | ||
| 6 | 10P | 6.5 | 7 | 1.8 | 1.6 | 5 | 1 | 5 | 9 | 5 | 12 | |
| 8 | 8.5 | 9 | 2 | 1.8 | 6 | 1.2 | 7 | 11 | 6 | 15 | ||
| 10 | 11 | 13 | 2.8 | 2.6 | 8 | 1.5 | 9 | 15 | 6 | 20 | ||
Basic Information
| Mounting Method | Press Fit | Thread Locking Treatment | Not Provided | Initial Load (Range)(N) | 0.01~50 |
|---|---|---|---|---|---|
| Tip Heat Treatment | Not Provided | Main Body Surface Treatment | Not Provided | Pin Surface Treatment | Not Provided |
Please check the type/dimensions/specifications of the part C-PFSSN8-10P in the Press Fit Ball Plungers series.
Specification/Dimensions
-
type
- C-PFPPN
- C-PFPSN
- C-PFSSN
- C-PFSSR
-
Outer Dia. M(mm)
-
Stroke (S)(mm)
-
Ball Material
- Stainless Steel
- Others / Ceramics
- Stainless Steel
-
Body Material
- Stainless Steel
- Others
- Stainless Steel
-
Initial Load(N)
-
Length L(mm)
-
Sale Type
- 10 pieces/bag
- 20 pieces/bag
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 1 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Frequently asked question (FAQ)
- Question: What role does a ball plunger play?
- Answer: It specifies the stroke of the front ball and can be used for temporary positioning and indexing of workpieces.
- Question: What is the anti-loosening treatment of a ball plunger?
- Answer: It refers to fixation using anaerobic adhesives filled in microcapsules. A ball plunger will fail once it becomes loosened, so it is necessary to use anaerobic adhesives for threads. An ideal anti-loosening effect will be achieved when placed at a temperature above 25℃ for 72 hours.
- Question: What is the meaning of max load and min load?
- Answer: It refers to the load of the spring in the product. The min load represents the initial load value, and the max load represents the load value at the maximum press-in limit.
- Question: What is the difference between a ball plunger and a spring plunger?
- Answer: A ball plunger is headed with a steel ball and its stroke is the displacement of the ball. A spring plunger has a pin-shaped front section and the displacement stroke of the pin is used for such purposes as temporary positioning and indexing of workpieces.
Products like this...
| Part Number |
|---|
| C-PFPPN5-20P |
| C-PFPPN6-10P |
| C-PFPPN8-10P |
| C-PFSSR10-10P |
| C-PFSSR4-20P |
| C-PFSSR5-20P |
| Part Number | Standard Unit Price | Number of pc(s). included in pkg. | Minimum order quantity | Volume Discount | Days to Ship | Outer Dia. M (mm) | Stroke (S) (mm) | Ball Material | Body Material | Initial Load (N) | Max. Load (N) | Length L (mm) | Sale Type |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 32.66 | 20 Pieces Per Package | 1 Pack(s) | Available | 1 Day(s) | 5 | 1.2 | [Others / Ceramics] Resin | [Others] Resin | 4 | 7 | 6 | 20 pieces/bag | |
MYR 18.08 | 10 Pieces Per Package | 1 Pack(s) | Available | 1 Day(s) | 6 | 1.6 | [Others / Ceramics] Resin | [Others] Resin | 5 | 9 | 7 | 10 pieces/bag | |
MYR 23.32 | 10 Pieces Per Package | 1 Pack(s) | Available | 1 Day(s) | 8 | 1.8 | [Others / Ceramics] Resin | [Others] Resin | 7 | 11 | 9 | 10 pieces/bag | |
MYR 28.57 | 10 Pieces Per Package | 1 Pack(s) | Available | 1 Day(s) | 10 | 2.8 | [Stainless Steel] SUS440C | [Stainless Steel] SUS303 | 6 | 20 | 13 | 10 pieces/bag | |
MYR 29.17 | 20 Pieces Per Package | 1 Pack(s) | Available | 1 Day(s) | 4 | 1.1 | [Stainless Steel] SUS440C | [Stainless Steel] SUS303 | 3 | 10 | 5 | 20 pieces/bag | |
MYR 32.66 | 20 Pieces Per Package | 1 Pack(s) | Available | 1 Day(s) | 5 | 1.4 | [Stainless Steel] SUS440C | [Stainless Steel] SUS303 | 5 | 10 | 6 | 20 pieces/bag |
Additional Products in this Category
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy