(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Head, Threaded Part Both Sides Hex Socket on Head (Spherical Type with Nozzle) (C-CFFGH16-35)
- Volume Discount
MiSUMi Economy
- Cam follower with Hex Socket on Both Sides Head and Threaded Part, CFFH / CFUH series from MISUMI.
- The roller outer diameter can be selected from 30 mm to 52 mm.
- The roller width can be selected from 14 mm to 24 mm.
- The allowable rotational speed of cam follower can be selectable up to 5500 RPM.
- The material of cam follower is made of SUJ2.
- RoHS
Part Number
Configured Part Number is shown.
C-CFFGH16-35
Product Overview
Cam bearing is a kind of bearing with shaft, which has its needle roller mounted into the thick-wall outer ring and inner ring, most suitable for the transmission guide rail.
Cam follower is a high-performance bearing with shaft, which has a needle-shaped roller called needle roller mounted inside. The needle roller has the function of improving the rotating capacity and can withstand high-speed rotation. In addition, the outer ring is designed with a thicker wall than ordinary bearings, and can also be used in places subject to impact loads or heavy loads.
.jpg)
Cam follower is a high-performance bearing with shaft, which has a needle-shaped roller called needle roller mounted inside. The needle roller has the function of improving the rotating capacity and can withstand high-speed rotation. In addition, the outer ring is designed with a thicker wall than ordinary bearings, and can also be used in places subject to impact loads or heavy loads.
.jpg)
Product Feature
1. Equipped with a shaft for easy installation!
2. Ideal for places subject to loads!
3. Also suitable for high-speed rotation!
Standard Cam Follower Structure
Roller Guide Mode
The cam follower with cage is suitable for applications with low friction coefficient and high rotation speed, and the full complement roller cam follower is suitable for applications with high rotation speed and heavy load.
Structure of Sealing Part
For the non-sealed type bearing, the gap between the outer ring and the end rod peripheral ring and between the outer ring and the side plate is small, thus forming a labyrinth. For the sealed type bearing, a sealing gasket is mounted in the shielded type labyrinth, thus preventing intrusion of foreign matter.
Outer Ring O.D. Shape
The bearing with spherical outer ring can alleviate uneven load caused by installation problems. The contact area between the bearing with arc outer ring and the slide rail surface is large, suitable for slide rail surfaces with large load or low hardness.
Slide Rail Load Capacity Comparison
2. Ideal for places subject to loads!
3. Also suitable for high-speed rotation!
Standard Cam Follower Structure
Roller Guide Mode
The cam follower with cage is suitable for applications with low friction coefficient and high rotation speed, and the full complement roller cam follower is suitable for applications with high rotation speed and heavy load.
Structure of Sealing Part
For the non-sealed type bearing, the gap between the outer ring and the end rod peripheral ring and between the outer ring and the side plate is small, thus forming a labyrinth. For the sealed type bearing, a sealing gasket is mounted in the shielded type labyrinth, thus preventing intrusion of foreign matter.
Outer Ring O.D. Shape
The bearing with spherical outer ring can alleviate uneven load caused by installation problems. The contact area between the bearing with arc outer ring and the slide rail surface is large, suitable for slide rail surfaces with large load or low hardness.
Slide Rail Load Capacity Comparison
Dimensional Drawing
Arc Type
Specifications Overview
Product Accuracy (μm)
Allowable Tolerance
Allowable Tolerance of Outer Ring and Allowable Value
Allowable Tolerance
Allowable Tolerance of Outer Ring and Allowable Value
Example of Use
Moving Direction
Linear Motion
The surface on the matching side must be flat
and the cam follower moves in a straight line
Linear Motion
The surface on the matching side must be flat
and the cam follower moves in a straight line
Swing Direction
The surface on the matching side is curved, and
the cam follower moves in a curve
The surface on the matching side is curved, and
the cam follower moves in a curve
Attaching Method
Do not use a hammer to directly hit the flange of the cam bearing during installation, otherwise it will cause poor rotation or fracture. Use a hex socket wrench or a slotted screwdriver.
Secure the hexagon socket or screwdriver slot for fixing, and then turn the nut with a wrench to tighten.
Bolt Tightening Torque
Do not exceed the maximum screw tightening torque when installing the cam follower. Otherwise, the threaded portion may be damaged.
Precautions
· If the cam follower falls to the ground or is struck hard, it may be damaged.
· Attention should be paid to the fact that impact can cause functional damage, even if it is not visible.
· Cam followers are suitable for radial loads and less suitable for thrust loads, so avoid using methods such as applying thrust loads.
· Some cam followers are not filled with grease due to different sizes.
Please refer to the table below and add proper amount of grease to the products that are not filled with grease before use.
Cam Follower Grease Performance and Service Temperature
· Attention should be paid to the fact that impact can cause functional damage, even if it is not visible.
· Cam followers are suitable for radial loads and less suitable for thrust loads, so avoid using methods such as applying thrust loads.
· Some cam followers are not filled with grease due to different sizes.
Please refer to the table below and add proper amount of grease to the products that are not filled with grease before use.
Cam Follower Grease Performance and Service Temperature
Dimensional Drawing
Arc Type
Specification Table
| Part Number |
|---|
| C-CFFGH16-35 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Outer Dia. D (mm) | Width B (mm) | Roller Type | Cam Follower: Stud Screw (Fine Thread) (mm) | Basic Load Rating Cr (Dynamic) (kN) | Basic Load Rating Cor (Static) (kN) | Allowable Rotational Speed (rpm) | Application |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 70.12 | 1 Piece(s) | Available | 14 Day(s) | 35 | 18 | Flat Type | M16×1.5 | 9.8 | 14.1 | 3600 | Heavy Load |
Loading...
Basic Information
| Product Category | Cam Followers | Tightening Method | Hex Socket on Head | Cam Follower Type | Standard Type |
|---|---|---|---|---|---|
| Size Standards | Metric System | Roller Lining | Not Provided | Shaft | Provided |
| Roller Guiding Method | With Retainer | Seal | Provided |
Please check the type/dimensions/specifications of the part C-CFFGH16-35 in the Head, Threaded Part Both Sides Hex Socket on Head (Spherical Type with Nozzle) series.
Specification/Dimensions
-
type
- CFFGH
- CFFH
- CFUGH
- CFUH
-
Outer Dia. D(mm)
-
Width B(mm)
-
Roller Type
- Spherical Outer Ring
- Flat Type
- Spherical Outer Ring
-
Cam Follower: Stud Screw (Fine Thread)(mm)
-
Allowable Rotational Speed(rpm)
-
Application
- Heavy Load
- Regular
-
CAD
- 3D
Days to Ship
-
- All
- 14 Day(s) or Less
- 15 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Frequently asked question (FAQ)
- Question: Mounting Method
- Answer: Do not use a hammer to directly hit the flange of the cam bearing during installation, otherwise it will cause poor rotation or fracture. Fix the inner hexagon or screwdriver slot with a hex socket wrench or a slotted screwdriver, and then turn the nut with a wrench to tighten. Do not exceed the maximum screw tightening torque when installing the cam follower. Otherwise, the threaded portion may be damaged.
- Question: Applicable load of cam follower
- Answer: It is applicable to radial load, but not very applicable to thrust load, so avoid using methods such as applying thrust load.
- Question: Usage difference of different O.D. shapes of outer ring
- Answer: The bearing with spherical outer ring can alleviate uneven load caused by installation problems. The contact area between the bearing with arc outer ring and the slide rail surface is large, suitable for slide rail surfaces with large load or low hardness.
Products like this...
| Part Number |
|---|
| C-CFFGH12-30 |
| C-CFFGH12-32 |
| C-CFFGH18-40 |
| C-CFFGH20-52 |
| C-CFFH12-30 |
| C-CFFH12-32 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Outer Dia. D (mm) | Width B (mm) | Roller Type | Cam Follower: Stud Screw (Fine Thread) (mm) | Basic Load Rating Cr (Dynamic) (kN) | Basic Load Rating Cor (Static) (kN) | Allowable Rotational Speed (rpm) | Application |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 59.54 | 1 Piece(s) | Available | 14 Day(s) | 30 | 14 | Flat Type | M12×1.5 | 6.8 | 8.4 | 5500 | Heavy Load | |
MYR 61.34 | 1 Piece(s) | Available | 14 Day(s) | 32 | 14 | Flat Type | M12×1.5 | 6.8 | 8.4 | 5500 | Heavy Load | |
MYR 89.62 | 1 Piece(s) | Available | 14 Day(s) | 40 | 20 | Flat Type | M18×1.5 | 10.9 | 15.5 | 2900 | Heavy Load | |
MYR 124.08 | 1 Piece(s) | Available | 15 Day(s) | 52 | 24 | Flat Type | M20×1.5 | 16.7 | 29 | 2400 | Heavy Load | |
MYR 60.34 | 1 Piece(s) | Available | 14 Day(s) | 30 | 14 | Flat Type | M12×1.5 | 6.8 | 8.4 | 5500 | Regular | |
MYR 62.12 | 1 Piece(s) | Available | 14 Day(s) | 32 | 14 | Flat Type | M12×1.5 | 6.8 | 8.4 | 5500 | Regular |
Additional Products in this Category
- Cam Followers-With Female Thread Hole for Grease Fitting/Flat Type
- Cam Followers Straight Slot, Flat
- Nylon Coated Cam Followers
- Cam Followers Stainless Steel, Flat, Hex Socket
- Cam Followers-With Female Thread Hole for Grease Fitting/Flat Type, Economy series
- Cam FollowerCFH Type
- Eccentric Collar Cam Follower
- Inch Type Cam Follower (with Driver Groove)
Tech Support
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy