(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
8 Series Tapping Joint for Aluminum Frame Blind Joints
- Volume Discount
The only additional work to the frame is the wrench hole. This is the cheapest blind joint available.
Part Number
Configured Part Number is shown.
HTJ8
Dimensional Drawing of Blind Joint Parts
No tapping is required on the HTJ frame.>
[S] Surface treatment Trivalent chromate
*SWCH-18A (Carbon steel wire for cold heading)
Specification Table of Blind Joint Parts
| Blind Joint Parts Model |
| HTJ8 |
・To check the latest price, please click the "Check Price" button after confirming the model number.
| Blind Joint Parts Model | Torx Bit | Compatible frame (drill hole diameter) | Proper tightening torque (maximum) | |
| Blind Joint Parts Type | No. | |||
| H.T.J. | 8 | HTJXL40 | φ10.5 | 74N・m |
| Compatible frame number | [Exception] Unusable frames | |||
| 8−4040* | 8−4080 | 8−40120 | 8−40160 | *HFSR8-4040 with curved surfaces cannot be used as wrench holes cannot be machined. |
How to Connect of Blind Joint Parts
* A Torx bitis required to tighten the tapping Blind Joint Parts.
| procedure | 1 | 2 | 3 |
| explanation | Temporarily fasten the tapping Blind Joint Parts to the end of the frame. (See the appropriate tightening torque above.) | Insert the head of the tapping Blind Joint Parts into the groove of frame B and slide it to the underside of A. | Insert the Torx bit through the wrench hole and tighten with an electric screwdriver. |
| Tapping Blind Joint Parts |  * No tap holes are required. |  Side View |  |
The tapping Blind Joint Parts is used to fasten the screws while tapping.
It requires a lot of force because the aluminum is cut while it is inserted and fastened. A Torx bit is used instead of an electric drill bit to fasten the screws.
In addition, to fasten two aluminum frames in an L shape, a wrench hole is required in one of the aluminum frames. It
can also be fastened in a T shape by specifying a wrench hole in a specified position.
| 8 Series Model Example | Frame A | Frame B | Torx Bit | Tapping Blind Joint Parts |
|---|---|---|---|---|
| HFS8-4040-1000 | HFS8-4040-1000-LCV | HTJXL40 | HTJ8 |
Technical Information of Blind Joint Parts
■ How to make the frame cap flush
The length of the aluminum frame is shortened by the thickness of the frame cap.
*Alterations (FR/FL) for "2.5 mm thickness" are not currently supported.C
: For the frame cap thickness, specify the protruding
model HFS6-3030-300-RCV-LCV and 300 mm length with wrench holes on the left and right.D
: For the frame cap, specify the model HFS6-3030-294-RCV-LCV-FR-FL, which does not protrude and is flush with the surface
, shortened by the frame cap thickness, and specify wrench holes and wrench hole shifts on the left and right.
C Frame cap pops out
D Frame caps are flush and
do not protrude
Product Comparison Information of Blind Joint Parts
■ 8 Series Blind Joint Parts
| Product name | Tapping Blind Joint Parts | Screw Blind Joint Parts | Single Blind Joint Parts | Center Blind Joint Parts | Post-insertion double Blind Joint Parts | First-in double Blind Joint Parts | Parallel Blind Joint Parts |
|---|---|---|---|---|---|---|---|
| Product Photos |  |  |  |  |  |  |  |
| Installation Diagram |  |  |  |  |  |  |  |
| Blind Joint Parts Material | SWCH-18A | Iron or SUS304 | Iron or SUS304 | SCS13 | Equivalent to SCS13/SUS304 | SUS316 equivalent / SUS304 | SCS13/SUS304 |
| Blind Joint Parts Features | No additional tapping holes are required. This is the most inexpensive Blind Joint Parts. | The plate allows for reliable and inexpensive connection. | Since the additional D hole does not penetrate all the way to the flat surface, this is a Blind Joint Parts with particularly excellent aesthetics. | This is the most common blind joint that can be used with a wide range of aluminium frames. | Stable fastening is possible from two points. This is the strongest fastening possible with blind joints. | This Blind Joint Parts can be used for a variety of purposes, such as extending frames or attaching to plates. | The frames can be connected side-by-side. |
| 8 Series Product Page | Viewing | Product page | Product page | Product page | Product page | Product page | Product page |
Related Items of Blind Joint Parts
■8 series (groove width 10mm)
| Product name | Aluminum frame | Blind Joint Parts | Frame cap | Groove cover | nut |
|---|---|---|---|---|---|
| photograph |  |  |  |  |  |
| Product page | Here | Here | Here | Here | Here |
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
| Part Number |
|---|
| HTJ8 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS |
|---|---|---|---|---|---|
MYR 3.18 | 1 Piece(s) | Available | 2 Day(s) | 10 |
Loading...
Basic Information
| Material | SWCH-18A (Carburized) | Extrusion No. | 8 | Type | Tapping Joint Type |
|---|
Please check the type/dimensions/specifications of the part HTJ8 in the 8 Series Tapping Joint for Aluminum Frame Blind Joints series.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Screw Joint for 5 Series Aluminum Frame Blind Joints
- Aluminum Frames with Built-in Joints - Screw Joint Type
- 8 Series Center Joint Kit for Aluminum Frame Blind Joints
- Blind Joint Components - Nuts for Pre-Assembly Insertion Double Joints Joint Nut for 8 Series (Slot Width 10mm) Aluminum Frames
- 8-45 Series (Groove Width 10 mm) Pre-Assembly Insertion Double Joint Kit
- Blind Joint Components - Aluminum Frames with Built-in Center Joints for 6 Series (Slot Width 8mm)
- Blind Joint Components - Aluminum Frames with Built-in Screw Joints for 6 Series (Slot Width 8mm)
- Blind Joint Components - Post Assembly Insertion Double Joint Kits for 8 Series (Slot Width 10mm) Aluminum Frames
Customers Who Viewed This Item Also Viewed
-
Torx Bit for 6 Series Aluminum Frame Blind JointsMISUMI
Standard Price : MYR 46.14
Days to Ship : 4 Day(s) or more
-
Tapping Joint for 5 Series Aluminum Frame Blind JointsMISUMI
Standard Price : MYR 2.09-
Days to Ship : 2 Day(s) or more
-
Torx Bit Tool for Blind Joint FasteningMISUMI
Standard Price : MYR 45.05-
Days to Ship : 4 Day(s) or more
-
6 Series Tapping Joint for Aluminum Frame Blind JointsMISUMI
Standard Price : MYR 2.65
Days to Ship : 4 Day(s) or more
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy