[Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Panel Clamp for Aluminum Frames (NSCP1H-S-6)

Volume Discount

Clamps (NSCP□H) for attaching panels to MISUMI aluminum extrusions. Up to 85% more economical than similar products (HSCP□H). Can be easily cut with scissors or a utility knife, etc.

Part Number

Configured Part Number is shown.

NSCP1H-S-6

Drawing/Specifications
3D Preview
Part Numbers
Catalog

Dimensional Drawing of Panel Mounts

・For Panel Mounts with a thickness of 5 mm

5 Series

NSCP1H

S(light gray)
Panel Mounts

6 Series

NSCP3H

S(light gray)
Panel Mounts

8・8－45 Series

NSCP5H

S(light gray)
Panel Mounts

・For Panel Mounts with a thickness of 3 mm

5 Series

NSCP3H

S(light gray)
Panel Mounts

6 Series

NSCP5HN

S(light gray)
Panel Mounts

8・8－45 Series

NSCP7H

S(light gray)
Panel Mounts

Type	color	[M] Material	Heat Resistance Temperature
NSCP	Light Grey	PVC Polyvinyl chloride	-25 to 80°C

[ ! ]NSCP3H is compatible with both the 5 and 6 series.
[ ! ]The material is different from HSCP and HSCPF, so the light gray color is different. There is also a thin groove at the bottom of the back for identification.

Specification Table of Panel Mounts

Model	−	color	−	length
NSCP3H	−	S	−	12

■Fixed size
・The price list below is currentas of April 2011.
・After confirming the model number, please click the "Check Price" button to check the latest price.

Model		color	Length m	Compatible Frames (Series)	Compatible Panel Mounts thickness
Type	No.

NSCP	1H	S (Light Gray)	6 12	5 Series	5
	3H				3
				6 Series	5
	5HN				3
	5H			8 Series 8-45 Series	5
	7H				3

Product Overview of Panel Mounts

It is inserted into the frame groove when installing the Panel Mounts.
It is only compatible with joint bracket connections.

Economy Panel Mounts Clamp Related Image 1_Product Overview

■ Panel Mounts Product type

Panel Mounts clamp	Economy Panel Mounts Clamp	Post-insertion Panel Mounts hold clamp (used as a set)		Soft Groove Cover Resin
Panel Mounts clamp	Economy Panel Mounts Clamp	Panel Mounts Hold	Clamp	Soft Groove Cover Resin

EPDM rubber, olefin elastomer	PVC Polyvinyl chloride	aluminum	EPDM rubber	polyethylene

Overview

This method involves fitting the Panel Mounts into the groove of the frame. This method
is recommended for those who value design, as it does not require drilling holes in the Panel Mounts or fastening with screws. It can only be used when assembling with
screw joints, center joints, single joints, first-in double joints, and last-in double joints.

How to Use	Electrical equipment covers, FA equipment covers, safety covers
Easy Panel Mounts removal	△
Gap between frame	be
Appearance	usually
Panel Mounts size calculation	easy
Panel Mounts thickness (mm)	3mm (5 series)
Panel Mounts thickness (mm)	5mm (6/8/8-45 series)

■ Installation method

The Panel Mounts size must be determined so that the fastening members do not interfere with the Panel Mounts.
(1) Fasten the three frames with blind joint parts.
(2) Insert the Panel Mounts into the frame groove.
(3) Cut the Panel Mounts clamp or inverted groove cover to the frame size and insert it into the gap.

Economy Panel Mounts Clamp Related Image 2_Installation Method

Insert the Panel Mounts clamp into the 6 series gap.

Parts Selection Method of Panel Mounts

Components	①Aluminum frame	②Aluminum frame	③Blind joint	④ Panel Mounts	⑤Panel Mounts clamp
Components
Model example	HFS6-3030-400-LCV-RCV	HFS6-3030-340-LDH-RDH	HSJNS6	ACAE-356-356-5-FS6-ES6-JS6-KS6	HSCP5HN-S-6
quantity	2	2	4	1	1

①Aluminum frame: Additional machining for blind joints (single joint: wrench hole machining)
②Aluminum frame: Additional machining for blind joints (single joint: D hole machining)
③Blind joint
④Panel Mounts: Additional machining for cutouts

Thickness3mm (5 series)
5mm (6/8/8-45 series)
Size
1mm clearance on each side.
Panel Mounts vertical width (A) = Frame inner dimension (X) + Frame groove inner depth - Clearance (1mm x 2)
Panel Mounts horizontal width (B) = Frame inner dimension (L2) + Frame groove inner depth - Clearance (1mm x 2)

Economy Panel Mounts Clamp Related Image 1_Panel Mounts Thickness

Groove Internal Depth

5 Series	6 Series	8 Series	8-45 Series
6mm x 2	9mm x 2	12.5mm x 2	13mm x 2

Alterations	Aluminum frame blind joint cutout
Alterations
Code	F□□・E□□・J□□・K□□
Spec.	We provide a relief cut for the blind joint of the aluminum frame. [ ! ]No allowance is taken into account for expansion and contraction of the plate due to temperature differences. [ ! ]The longitudinal direction of the cutout is always on the A dimension side. [ ! ]Only applicable to T=3 and 5 How to specifyFS 6 Frame type Joint Type Notch position (from the diagram above) [ ! ]Only applicable to standard size

Joint-specific
cutout
shape

Simple joint
kit

Single joint kit
Screw joint kit

Pre-assembled double joint kit

Center joint

Post-insertion double joint

Single joint
kit standard type

Single joint
kit narrow type,
screw joint
kit

Panel Mounts Standard Type

Eccentric nut type

(Example 1)

(Example 2)

In example 2, no cutout in the Panel Mounts is required.

[ ! ]The illustration shows a single joint kit narrow type.

(Example 1)

(Example 2)

Example) Panel Mounts size calculation
A = L1 (400-30-30) + groove depth (9mm x 2) - clearance (2mm) = 356mm
B = L2 (340) + groove depth (9mm x 2) - clearance (2mm) = 356mm
thickness 5mm
6 series single joint cutout (-FS6-ES6-JS6-KS6)
↓
ACAE-356-356-5-FS6-ES6-JS6-KS6

⑤ Panel Mounts clamp (post-insertion Panel Mounts hold/Panel Mounts hold clamp also acceptable)
Length: ① Frame inside vertical -1mm, ② Frame inside horizontal -17mm (-1mm if corners are cut at 45 degrees)
Thickness: Select a Panel Mounts clamp with a thickness equal to the frame groove width minus the Panel Mounts thickness.
Additional work: Corners cut at 45 degrees (you can also cut them yourself with scissors, etc.)

Economy Panel Mounts Clamp Related Image 1_Panel Mounts Clamp

Insert the Panel Mounts clamp into the 6 series gap.

How to Use: The Panel Mounts can be
easily cut with scissors or a cutter . Cutting the corners at a 45-degree angle will improve the appearance.

Economy Panel Mounts Clamp Related Image 2_Panel Mounts Clamp

Select the Panel Mounts clamp model based on the thickness of the aluminum frame and Panel Mounts.

series	Groove Width	Panel Mounts Thickness
series	Groove Width	3mm	5mm
5	6mm	HSCP3H HSCPF3H NSCP3H	HSCP1H HSCPF1H NSCP1H
6	8mm	HSCP5H HSCPF5HN NSCP5HN	HSCP3H HSCPF3H NSCP3H
8	10mm	HSCP7H HSCPF7H NSCP7H	HSCP5H HSCPF5HN NSCP5HN
8-45	10mm	HSCP7H HSCPF7H NSCP7H	HSCP5H HSCPF5HN NSCP5HN

Representative Model	color	Material	Heat resistance temperature (℃)
HSCP3H	black	EDPM Rubber	-40～+120
HSCPF3H	Light Grey	Olefin elastomer	-20～+80
NSCP3H	Light Grey	PVC Polyvinyl chloride	-25～+80

*If you use the post-insertion Panel Mounts hold and Panel Mounts hold clamp instead of the Panel Mounts clamp, you can attach the Panel Mounts after assembling the frame.
*The plate or Panel Mounts can be inserted by turning the groove cover resin soft on the other side and inserting it inside the groove.

Before installation

After installation

Panel Mounts Hold Side

Clamp side

Economy Panel Mounts Clamp Related Image 1_Panel Mounts Clamp Model

・Panel Mounts can be installed after the frame is assembled.
・Panel Mounts can be replaced without disassembling the frame.
[ ! ]Panel Mounts holding clamps can be cut with a cutter.

(Installation Procedure)

Economy Panel Mounts Clamp Related Image 2_Panel Mounts Clamp Model

HFS6-3030

①Insert the Panel Mounts hold into the groove of the frame.

HFS6-3030

②Insert the Panel Mounts onto the Panel Mounts hold.

HFS6-3030

③Insert the Panel Mounts hold clamp into the gap.

・Example of using a groove cover

・Example of using the frame support cover

■Panel Mounts Features of HSCL/HSCLS (soft resin)
Compared to HSCA/HSCAS (resin), it is softer.
It is easy to insert into grooves and can be easily cut with scissors.

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 45; 60

Part Number
NSCP1H-S-6

Part Number	Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	Compatible Frame (Series)	Insertion Width	Length L (m)	Compatible Panel Plate Thickness
	MYR 37.84	1 Piece(s)	Available	4 Day(s) or more	5 Series	1H (1mm Width)	6	5

Product TOP

Basic Information

Material	Resin	Material	PVC (Polyvinyl Chloride)	Color	S (Light Gray)

Please check the type/dimensions/specifications of the part NSCP1H-S-6 in the Panel Clamp for Aluminum Frames series.

Configure

1 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

type
- NSCP1H
- NSCP3H
- NSCP5H
- NSCP5HN
- NSCP7H
Clear
Compatible Frame (Series)
5 Series

5 Series,6 Series

6 Series

8 Series,8-45 Series
Clear
Insertion Width
- 1H (1mm Width)
- 3H (3mm Width)
- 5H (5mm Width)
- 5HN (5mm Width)
- 7H (7mm Width)
Clear
Length L(m)
- 6
- 12
Clear
Compatible Panel Plate Thickness
- 3
- 3(5 Series), 5(6 Series)
- 5
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

2 Day(s) or Less

4 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Products like this...

Part Number
NSCP1H-S-12
NSCP3H-S-12
NSCP3H-S-6
NSCP5H-S-12
NSCP5H-S-6
NSCP5HN-S-12

Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	Compatible Frame (Series)	Insertion Width	Length L (m)	Compatible Panel Plate Thickness
MYR 63.15	1 Piece(s)	Available	4 Day(s) or more	5 Series	1H (1mm Width)	12	5
MYR 65.72	1 Piece(s)	Available	2 Day(s)	5 Series,6 Series	3H (3mm Width)	12	3(5 Series), 5(6 Series)
MYR 39.50	1 Piece(s)	Available	4 Day(s) or more	5 Series,6 Series	3H (3mm Width)	6	3(5 Series), 5(6 Series)
MYR 118.87	1 Piece(s)	Available	4 Day(s) or more	8 Series,8-45 Series	5H (5mm Width)	12	5
MYR 71.17	1 Piece(s)	Available	4 Day(s) or more	8 Series,8-45 Series	5H (5mm Width)	6	5
MYR 65.72	1 Piece(s)	Available	4 Day(s) or more	6 Series	5HN (5mm Width)	12	3

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Standard/Configurable Length Panel Clamp for Aluminum Frames
MISUMI

Days to Ship : 1 Day(s) or more
Plastic Panel Bracket - 90° Rotational Installation
MISUMI

Standard Price : MYR 8.49-

Days to Ship : 1 Day(s) or more
Resin/Soft Resin Slot Cover for Aluminum Frames
MISUMI

Standard Price : MYR 9.70-

Days to Ship : 1 Day(s) or more
Clamp for Post-Assembly Panel Holder
MISUMI

Days to Ship : 2 Day(s) or more
Aluminum Extrusion Panel Spacer - 3-5mm Plate Compatible
MISUMI

Days to Ship : 6 Day(s) or more
Aluminum T-Stopper Panel Bracket, 3-5mm Panel Compatible
MISUMI

Standard Price : MYR 8.49-

Days to Ship : 1 Day(s) or more
Post-Assembly Panel Holder for HSDP Clamp
MISUMI

Days to Ship : 11 Day(s) or more
EPDM Aluminum Extrusion Sealing Cover
MISUMI

Days to Ship : 9 Day(s) or more
Aluminum Doors Unit
MISUMI

Days to Ship : 14 Day(s) or more
Soft PVC Aluminum Extrusion Slot Cover - Dust Resistant
MISUMI

Standard Price : MYR 31.52-

Days to Ship : 2 Day(s)
LED Line Lights - For Aluminum Frame Slot
MISUMI

Standard Price : MYR 191.55-

Days to Ship : 4 Day(s) or more
Panel Clamping Bracket - 3mm and 5mm Panel Compatible
MISUMI

Standard Price : MYR 10.12-

Days to Ship : 4 Day(s) or more

back next

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations): Tel：(60) 3 7890 6399; 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday); Technical Inquiry

How can we improve?

Panel Clamp for Aluminum Frames (NSCP1H-S-6)

Dimensional Drawing of Panel Mounts

Specification Table of Panel Mounts

Product Overview of Panel Mounts

Parts Selection Method of Panel Mounts

Part Number

Basic Information

Configure

Specification/Dimensions

type

Compatible Frame (Series)

Insertion Width

Length L(m)

Compatible Panel Plate Thickness

CAD

Days to Ship

Specify Alterations

Products like this...

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm