[Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Polyacetal Plates-Standard / Antistatic Grade

Polyacetal is a general-purpose engineering plastic used for various industrial purposes. Superior dimensional stability compared to MC nylon.

(i)Caution

Following a change in material standards, the 6-mm plate thickness (T dimension) of the PACA type has an updated T dimension tolerance (+0 mm or more).Orders have been suspended due to the possibility of it becoming the same standard as the 9-mm T dimension as a result of the change.If a T dimension of 6 mm is required, select PACA2F, the upper-lower surface finished product as the recommended alternative.The PACA type's 6-mm T dimension will have its standards integrated with the 9-mm T dimension going forward.
Please check the content on our website as the PDF does not contain the most up-to-date information.

Part Number

Configured Part Number is shown.

Drawing/Specifications
3D Preview
Part Numbers
More Information
Catalog
Technical Information

[ M ] Material: Polyacetal

Type	[ M ]Grade	Color	Operating Ambient Temperature
PAA	Standard	White	-45~95°C
PABA	Standard	Black	-45~95°C
PACA	Electric Conductivity	Ocher	Ambient Temperature: ~ 80°C

Specifications

■Pre-drilled Type

Part Number	-	A	-	B	-	T	-	F	-	G	-	Screw Nominal Dia.	-	L
PABA4H PABA4H	- -	400 500	- -	325 300	- -	15 10	- -	F300 F300	- -	G200 G200	- -	Z6 M5	-	L7.5

■Standard Type

Part Number	-	A	-	B	-	T
PAA PAANTQ PAA4FN PAA6FMM PAA2FQ	- - - - -	300 200.5 150.5 100.3 80	- - - - -	200 100.5 100.3 90.5 50	- - - - -	40 10 15 10.5 5

• Circular Sawing
• Guaranteed Perpendicularity of Circular Saw Cuts
• 4-side Milling
• 6-surface Milling
• Upper-lower Surface Milling

Dimension Tolerance of A and B

T	A, B	A, B Dimension Tolerance
T	Unit: mm	A, B Dimension Tolerance
5~30	~99	±0.5
	100~250	±0.75
	251~	±1.0
40~60	~300	0~+5

T Dimension Tolerance, Rate of Camber and Torsion

T	T Dimension Tolerance	Rates of Camber and Torsion
T	T Dimension Tolerance	per 1,000mm
5~12	+0.2~+1.5	1.0% or Less
15~30	+0.3~+2.5	0.5% or Less
35~50	0~+3.0
60~70	+0.5~+3.5
80~100	+0.5~+5.0

Precision Guarantee

Finish	Width Parallelism	Perpendicularity of Reference Plane
	per 100mm
Guaranteed Perpendicularity of Circular Saw Cuts (NT)	0.1	0.1
4-side Milling (4F)
6-surface Milling (6F)

[ ! ]Reference plane stickers are attached to 4-side milled plates.

■Standard Type

Part Number							T Dimension Range by Material	A	B	T
Type	Finish	T Dimension Tolerance	A, B Dimension Tolerance
PAA (Standard White) PABA (Standard Black) PACA (Conductive Grade)	Circular Sawing							1mm Increment		Selection
	-	Not available	Not available				PAA	20~500	20~400	5, 6, 8, 10, 12, 15, 20, 25, 30
								40~300	40~300	40, 50, 60
							PABA	20~500	20~400	5, 6, 8, 10, 12, 15, 20, 25, 30
							PACA	20~500	20~400	6, 9, 12, 19, 25
	Guaranteed Perpendicularity of Circular Sawing (NT)							0.5mm Increment		Selection
	NT	Not available		T5, 6, 8, 9, 10	T12, 15, 19, 20	T25, 30	PAA PABA	20~500	20~400	5, 6, 8, 10, 12, 15, 20, 25, 30
			Q	0~+0.3	0~+0.4	0~+0.5
			N	±0.2	±0.3	±0.4
			M	-0.3~0	-0.4~0	-0.5~0	PACA	20~500	20~400	6, 9, 12, 19, 25
	4-side Milling (4F)							0.1mm Increment		Selection
	4F	Not available	Q 0~+0.2 N ±0.1 M -0.2~0				PAA PABA	10~400	10~200	5, 6, 8, 10, 12, 15, 20, 25, 30
							PACA	10~400	10~200	6, 9, 12, 19, 25
	6-surface Milling (6F)							0.1mm Increment		0.1mm Increment
	6F	Q 0~+0.2 N ±0.1 M -0.2~0	Q 0~+0.2 N ±0.1 M -0.2~0				PAA PABA	10~400	10~200	5~29
							PACA	10~400	10~200	5~24
	Upper-lower Surface Milling (2F)							1mm Increment		0.1mm Increment
	2F	Q 0~+0.2 N ±0.1 M -0.2~0	Not available				PAA PABA	20~400	20~250	5~29
							PACA	20~400	20~250	5~24
[ ! ]T40, 50 and 60 may have steps on cut surfaces.

[ ! ]For T0.5, 1.0, 1.5, 2.0, see P.973.

■Pre-drilled Type

Part Number			A	B	T Dimension Range by Material	T	F	G
Type	T Dimension Tolerance	Number of Holes
PAA (Standard White) PABA (Standard Black) PACA (Conductive Grade)	Circular Sawing		1mm Increment			Selection	0.5mm Increment
	Not available	2H (Horizontal) 2HL (Vertical) 4H 6H	20~500	20~400	PAA PABA	5, 6, 8, 10, 12, 15, 20, 25, 30	6~491.5	4.5~395.5 (2H) 6~391.5 (2HL, 4H, 6H)
							(2H, 4H)
							4.5~395.5
							(2HL)
							6~245.5
					PACA	6, 9, 12, 19, 25	(6H)
	Upper-lower Surface Milling (2F)		1mm Increment			T Dimension Configurable: 0.1mm Increment	0.5mm Increment
	2FQ 0~+0.2 2FN ±0.1 2FM -0.2~0	2H (Horizontal) 2HL (Vertical) 4H 6H	20~400	20~250	PAA PABA	5~29	6~391.5	4.5~245.5 (2H) 6~241.5 (2HL, 4H, 6H)
							(2H, 4H)
							4.5~395.5
							(2HL)
							6~195.5
					PACA	5~24	(6H)

T Dimension	Pre-drilled Hole Nominal Dia.
	Through Hole	Counterbore Hole					Threaded Insert
	N	Z					M						L
5	3 4 5 6 8 10	-					3	4					Select from Table 1 Selectable
6, 7		3					3	4	5	6
8		3	4	5			3	4	5	6
9			4	5	6		3	4	5	6	8
10, 11			4	5	6		3	4	5	6	8	10
12~14			4	5	6		3	4	5	6	8	10
15~30			4	5	6	8	3	4	5	6	8	10

[ ! ]Dimension F Specification Range: For 2H and 4H, d(d₁)+2.5≤F≤A-d(d₁)-5; for 2HL, d(d₁)/2+2.5≤F≤A-d(d₁)/2-2.5; for 6H, d(d₁)+2.5≤F≤(A-d(d₁)-5)/2.
[ ! ]Dimension G Specification Range: For 2H, d(d₁)/2+2.5≤G≤B-d(d₁)/2-2.5; for 2HL, 4H and 6H, d(d₁)+2.5≤G≤B-d(d₁)-5. (d for through hole and threaded insert, d₁ for counterbore)
[ ! ]For Pre-drilled Type, select N (through hole) or Z (counterbore hole); for Threaded Insert Type, select M (threaded insert) or L (insertion length).

Alterations

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 45; 60

Part Number
PAA2FM2H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[4.5-245.5/0.5]-M[3,4,5,6,8,10]
PAA2FM2H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[4.5-245.5/0.5]-N[3,4,5,6,8,10]
PAA2FM2H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[4.5-245.5/0.5]-Z[3,4,5,6,8,10]
PAA2FM2HL-[20-400/1]-[20-250/1]-[5-29/0.1]-F[4.5-395.5/0.5]-G[6-245.5/0.5]-M[3,4,5,6,8,10]
PAA2FM2HL-[20-400/1]-[20-250/1]-[5-29/0.1]-F[4.5-395.5/0.5]-G[6-245.5/0.5]-N[3,4,5,6,8,10]
PAA2FM2HL-[20-400/1]-[20-250/1]-[5-29/0.1]-F[4.5-395.5/0.5]-G[6-245.5/0.5]-Z[3,4,5,6,8]
PAA2FM4H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[6-245.5/0.5]-M[3,4,5,6,8,10]
PAA2FM4H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[6-245.5/0.5]-N[3,4,5,6,8,10]
PAA2FM4H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[6-245.5/0.5]-Z[3,4,5,6,8,10]
PAA2FM6H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-195.5/0.5]-G[6-245.5/0.5]-M[3,4,5,6,8,10]
PAA2FM6H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-195.5/0.5]-G[6-245.5/0.5]-N[3,4,5,6,8,10]
PAA2FM6H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-195.5/0.5]-G[6-245.5/0.5]-Z[3,4,5,6,8,10]
PAA2FM-[20-400/1]-[20-250/1]-[5-29/0.1]
PAA2FN2H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[4.5-245.5/0.5]-M[3,4,5,6,8,10]
PAA2FN2H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[4.5-245.5/0.5]-N[3,4,5,6,8,10]
PAA2FN2H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[4.5-245.5/0.5]-Z[3,4,5,6,8,10]
PAA2FN2HL-[20-400/1]-[20-250/1]-[5-29/0.1]-F[4.5-395.5/0.5]-G[6-245.5/0.5]-M[3,4,5,6,8,10]
PAA2FN2HL-[20-400/1]-[20-250/1]-[5-29/0.1]-F[4.5-395.5/0.5]-G[6-245.5/0.5]-N[3,4,5,6,8,10]
PAA2FN2HL-[20-400/1]-[20-250/1]-[5-29/0.1]-F[4.5-395.5/0.5]-G[6-245.5/0.5]-Z[3,4,5,6,8]
PAA2FN4H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[6-245.5/0.5]-M[3,4,5,6,8,10]
PAA2FN4H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[6-245.5/0.5]-N[3,4,5,6,8,10]
PAA2FN4H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[6-245.5/0.5]-Z[3,4,5,6,8,10]
PAA2FN6H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-195.5/0.5]-G[6-245.5/0.5]-M[3,4,5,6,8,10]
PAA2FN6H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-195.5/0.5]-G[6-245.5/0.5]-N[3,4,5,6,8,10]
PAA2FN6H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-195.5/0.5]-G[6-245.5/0.5]-Z[3,4,5,6,8,10]
PAA2FN-[20-400/1]-[20-250/1]-[5-29/0.1]
PAA2FQ2H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[4.5-245.5/0.5]-M[3,4,5,6,8,10]
PAA2FQ2H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[4.5-245.5/0.5]-N[3,4,5,6,8,10]
PAA2FQ2H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[4.5-245.5/0.5]-Z[3,4,5,6,8,10]
PAA2FQ2HL-[20-400/1]-[20-250/1]-[5-29/0.1]-F[4.5-395.5/0.5]-G[6-245.5/0.5]-M[3,4,5,6,8,10]
PAA2FQ2HL-[20-400/1]-[20-250/1]-[5-29/0.1]-F[4.5-395.5/0.5]-G[6-245.5/0.5]-N[3,4,5,6,8,10]
PAA2FQ2HL-[20-400/1]-[20-250/1]-[5-29/0.1]-F[4.5-395.5/0.5]-G[6-245.5/0.5]-Z[3,4,5,6,8]
PAA2FQ4H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[6-245.5/0.5]-M[3,4,5,6,8,10]
PAA2FQ4H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[6-245.5/0.5]-N[3,4,5,6,8,10]
PAA2FQ4H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-391.5/0.5]-G[6-245.5/0.5]-Z[3,4,5,6,8,10]
PAA2FQ6H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-195.5/0.5]-G[6-245.5/0.5]-M[3,4,5,6,8,10]
PAA2FQ6H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-195.5/0.5]-G[6-245.5/0.5]-N[3,4,5,6,8,10]
PAA2FQ6H-[20-400/1]-[20-250/1]-[5-29/0.1]-F[6-195.5/0.5]-G[6-245.5/0.5]-Z[3,4,5,6,8,10]
PAA2FQ-[20-400/1]-[20-250/1]-[5-29/0.1]
PAA2H-[20-600/1]-[20-500/1]-[5,6,8,10,12,15,20,25,30]-F[6-591.5/0.5]-G[4.5-495.5/0.5]-M[3,4,5,6,8,10]
PAA2H-[20-600/1]-[20-500/1]-[5,6,8,10,12,15,20,25,30]-F[6-591.5/0.5]-G[4.5-495.5/0.5]-N[3,4,5,6,8,10]
PAA2H-[20-600/1]-[20-500/1]-[5,6,8,10,12,15,20,25,30]-F[6-591.5/0.5]-G[4.5-495.5/0.5]-Z[3,4,5,6,8,10]
PAA2HL-[20-600/1]-[20-500/1]-[5,6,8,10,12,15,20,25,30]-F[4.5-595.5/0.5]-G[6-491.5/0.5]-M[3,4,5,6,8,10]
PAA2HL-[20-600/1]-[20-500/1]-[5,6,8,10,12,15,20,25,30]-F[4.5-595.5/0.5]-G[6-491.5/0.5]-N[3,4,5,6,8,10]
PAA2HL-[20-600/1]-[20-500/1]-[5,6,8,10,12,15,20,25,30]-F[4.5-595.5/0.5]-G[6-491.5/0.5]-Z[3,4,5,6,8]
PAA4FM-[10-400/0.1]-[10-200/0.1]-[5,6,8,10,12,15,20,25,30]
PAA4FN-[10-400/0.1]-[10-200/0.1]-[5,6,8,10,12,15,20,25,30]
PAA4FQ-[10-400/0.1]-[10-200/0.1]-[5,6,8,10,12,15,20,25,30]
PAA4H-[20-600/1]-[20-500/1]-[5,6,8,10,12,15,20,25,30]-F[6-591.5/0.5]-G[6-491.5/0.5]-M[3,4,5,6,8,10]
PAA4H-[20-600/1]-[20-500/1]-[5,6,8,10,12,15,20,25,30]-F[6-591.5/0.5]-G[6-491.5/0.5]-N[3,4,5,6,8,10]
PAA4H-[20-600/1]-[20-500/1]-[5,6,8,10,12,15,20,25,30]-F[6-591.5/0.5]-G[6-491.5/0.5]-Z[3,4,5,6,8,10]
PAA6FMM-[10-400/0.1]-[10-200/0.1]-[5-29/0.1]
PAA6FMN-[10-400/0.1]-[10-200/0.1]-[5-29/0.1]
PAA6FMQ-[10-400/0.1]-[10-200/0.1]-[5-29/0.1]
PAA6FNM-[10-400/0.1]-[10-200/0.1]-[5-29/0.1]
PAA6FNN-[10-400/0.1]-[10-200/0.1]-[5-30/0.1]
PAA6FNQ-[10-400/0.1]-[10-200/0.1]-[5-29/0.1]
PAA6FQM-[10-400/0.1]-[10-200/0.1]-[5-29/0.1]
PAA6FQN-[10-400/0.1]-[10-200/0.1]-[5-29/0.1]
PAA6FQQ-[10-400/0.1]-[10-200/0.1]-[5-29/0.1]

Standard Unit Price	Minimum order quantity	Days to Ship	RoHS	Color	Hole Drilling	Finishing	T Dimension Tolerance	AB Dimension Tolerance	A (mm)	B (mm)	Counterbore Hole Z (mm)	F	G	M	N	T (mm)
-	1 Piece(s)	8 Day(s) or more	10	White	2H	Upper-lower Surface Milling	M (0/-0.2)	-	20 ～ 400	20 ～ 250	-	6 ～ 391.5	4.5 ～ 245.5	3 ～ 10	-	5 ～ 29
-	1 Piece(s)	8 Day(s) or more	10	White	2H	Upper-lower Surface Milling	M (0/-0.2)	-	20 ～ 400	20 ～ 250	-	6 ～ 391.5	4.5 ～ 245.5	-	3 ～ 10	5 ～ 29
-	1 Piece(s)	8 Day(s) or more	10	White	2H	Upper-lower Surface Milling	M (0/-0.2)	-	20 ～ 400	20 ～ 250	3 ～ 10	6 ～ 391.5	4.5 ～ 245.5	-	-	5 ～ 29
-	1 Piece(s)	8 Day(s) or more	10	White	2HL	Upper-lower Surface Milling	M (0/-0.2)	-	20 ～ 400	20 ～ 250	-	4.5 ～ 395.5	6 ～ 245.5	3 ～ 10	-	5 ～ 29
-	1 Piece(s)	8 Day(s) or more	10	White	2HL	Upper-lower Surface Milling	M (0/-0.2)	-	20 ～ 400	20 ～ 250	-	4.5 ～ 395.5	6 ～ 245.5	-	3 ～ 10	5 ～ 29
-	1 Piece(s)	8 Day(s) or more	10	White	2HL	Upper-lower Surface Milling	M (0/-0.2)	-	20 ～ 400	20 ～ 250	3 ～ 8	4.5 ～ 395.5	6 ～ 245.5	-	-	5 ～ 29
-	1 Piece(s)	8 Day(s) or more	10	White	4H	Upper-lower Surface Milling	M (0/-0.2)	-	20 ～ 400	20 ～ 250	-	6 ～ 391.5	6 ～ 245.5	3 ～ 10	-	5 ～ 29
-	1 Piece(s)	8 Day(s) or more	10	White	4H	Upper-lower Surface Milling	M (0/-0.2)	-	20 ～ 400	20 ～ 250	-	6 ～ 391.5	6 ～ 245.5	-	3 ～ 10	5 ～ 29
-	1 Piece(s)	8 Day(s) or more	10	White	4H	Upper-lower Surface Milling	M (0/-0.2)	-	20 ～ 400	20 ～ 250	3 ～ 10	6 ～ 391.5	6 ～ 245.5	-	-	5 ～ 29
-	1 Piece(s)	8 Day(s) or more	10	White	6H	Upper-lower Surface Milling	M (0/-0.2)	-	20 ～ 400	20 ～ 250	-	6 ～ 195.5	6 ～ 245.5	3 ～ 10	-	5 ～ 29
-	1 Piece(s)	8 Day(s) or more	10	White	6H	Upper-lower Surface Milling	M (0/-0.2)	-	20 ～ 400	20 ～ 250	-	6 ～ 195.5	6 ～ 245.5	-	3 ～ 10	5 ～ 29
-	1 Piece(s)	8 Day(s) or more	10	White	6H	Upper-lower Surface Milling	M (0/-0.2)	-	20 ～ 400	20 ～ 250	3 ～ 10	6 ～ 195.5	6 ～ 245.5	-	-	5 ～ 29
-	1 Piece(s)	6 Day(s) or more	10	White	No Drilling Alteration	Upper-lower Surface Milling	M (0/-0.2)	-	20 ～ 400	20 ～ 250	-	-	-	-	-	5 ～ 29
-	1 Piece(s)	8 Day(s) or more	10	White	2H	Upper-lower Surface Milling	N (±0.1)	-	20 ～ 400	20 ～ 250	-	6 ～ 391.5	4.5 ～ 245.5	3 ～ 10	-	5 ～ 29
-	1 Piece(s)	8 Day(s) or more	10	White	2H	Upper-lower Surface Milling	N (±0.1)	-	20 ～ 400	20 ～ 250	-	6 ～ 391.5	4.5 ～ 245.5	-	3 ～ 10	5 ～ 29
-	1 Piece(s)	8 Day(s) or more	10	White	2H	Upper-lower Surface Milling	N (±0.1)	-	20 ～ 400	20 ～ 250	3 ～ 10	6 ～ 391.5	4.5 ～ 245.5	-	-	5 ～ 29
-	1 Piece(s)	8 Day(s) or more	10	White	2HL	Upper-lower Surface Milling	N (±0.1)	-	20 ～ 400	20 ～ 250	-	4.5 ～ 395.5	6 ～ 245.5	3 ～ 10	-	5 ～ 29
-	1 Piece(s)	8 Day(s) or more	10	White	2HL	Upper-lower Surface Milling	N (±0.1)	-	20 ～ 400	20 ～ 250	-	4.5 ～ 395.5	6 ～ 245.5	-	3 ～ 10	5 ～ 29
-	1 Piece(s)	8 Day(s) or more	10	White	2HL	Upper-lower Surface Milling	N (±0.1)	-	20 ～ 400	20 ～ 250	3 ～ 8	4.5 ～ 395.5	6 ～ 245.5	-	-	5 ～ 29
-	1 Piece(s)	8 Day(s) or more	10	White	4H	Upper-lower Surface Milling	N (±0.1)	-	20 ～ 400	20 ～ 250	-	6 ～ 391.5	6 ～ 245.5	3 ～ 10	-	5 ～ 29
-	1 Piece(s)	8 Day(s) or more	10	White	4H	Upper-lower Surface Milling	N (±0.1)	-	20 ～ 400	20 ～ 250	-	6 ～ 391.5	6 ～ 245.5	-	3 ～ 10	5 ～ 29
-	1 Piece(s)	8 Day(s) or more	10	White	4H	Upper-lower Surface Milling	N (±0.1)	-	20 ～ 400	20 ～ 250	3 ～ 10	6 ～ 391.5	6 ～ 245.5	-	-	5 ～ 29
-	1 Piece(s)	8 Day(s) or more	10	White	6H	Upper-lower Surface Milling	N (±0.1)	-	20 ～ 400	20 ～ 250	-	6 ～ 195.5	6 ～ 245.5	3 ～ 10	-	5 ～ 29
-	1 Piece(s)	8 Day(s) or more	10	White	6H	Upper-lower Surface Milling	N (±0.1)	-	20 ～ 400	20 ～ 250	-	6 ～ 195.5	6 ～ 245.5	-	3 ～ 10	5 ～ 29
-	1 Piece(s)	8 Day(s) or more	10	White	6H	Upper-lower Surface Milling	N (±0.1)	-	20 ～ 400	20 ～ 250	3 ～ 10	6 ～ 195.5	6 ～ 245.5	-	-	5 ～ 29
-	1 Piece(s)	6 Day(s) or more	10	White	No Drilling Alteration	Upper-lower Surface Milling	N (±0.1)	-	20 ～ 400	20 ～ 250	-	-	-	-	-	5 ～ 29
-	1 Piece(s)	8 Day(s) or more	10	White	2H	Upper-lower Surface Milling	Q (+0.2/0)	-	20 ～ 400	20 ～ 250	-	6 ～ 391.5	4.5 ～ 245.5	3 ～ 10	-	5 ～ 29
-	1 Piece(s)	8 Day(s) or more	10	White	2H	Upper-lower Surface Milling	Q (+0.2/0)	-	20 ～ 400	20 ～ 250	-	6 ～ 391.5	4.5 ～ 245.5	-	3 ～ 10	5 ～ 29
-	1 Piece(s)	8 Day(s) or more	10	White	2H	Upper-lower Surface Milling	Q (+0.2/0)	-	20 ～ 400	20 ～ 250	3 ～ 10	6 ～ 391.5	4.5 ～ 245.5	-	-	5 ～ 29
-	1 Piece(s)	8 Day(s) or more	10	White	2HL	Upper-lower Surface Milling	Q (+0.2/0)	-	20 ～ 400	20 ～ 250	-	4.5 ～ 395.5	6 ～ 245.5	3 ～ 10	-	5 ～ 29
-	1 Piece(s)	8 Day(s) or more	10	White	2HL	Upper-lower Surface Milling	Q (+0.2/0)	-	20 ～ 400	20 ～ 250	-	4.5 ～ 395.5	6 ～ 245.5	-	3 ～ 10	5 ～ 29
-	1 Piece(s)	8 Day(s) or more	10	White	2HL	Upper-lower Surface Milling	Q (+0.2/0)	-	20 ～ 400	20 ～ 250	3 ～ 8	4.5 ～ 395.5	6 ～ 245.5	-	-	5 ～ 29
-	1 Piece(s)	8 Day(s) or more	10	White	4H	Upper-lower Surface Milling	Q (+0.2/0)	-	20 ～ 400	20 ～ 250	-	6 ～ 391.5	6 ～ 245.5	3 ～ 10	-	5 ～ 29
-	1 Piece(s)	8 Day(s) or more	10	White	4H	Upper-lower Surface Milling	Q (+0.2/0)	-	20 ～ 400	20 ～ 250	-	6 ～ 391.5	6 ～ 245.5	-	3 ～ 10	5 ～ 29
-	1 Piece(s)	8 Day(s) or more	10	White	4H	Upper-lower Surface Milling	Q (+0.2/0)	-	20 ～ 400	20 ～ 250	3 ～ 10	6 ～ 391.5	6 ～ 245.5	-	-	5 ～ 29
-	1 Piece(s)	8 Day(s) or more	10	White	6H	Upper-lower Surface Milling	Q (+0.2/0)	-	20 ～ 400	20 ～ 250	-	6 ～ 195.5	6 ～ 245.5	3 ～ 10	-	5 ～ 29
-	1 Piece(s)	8 Day(s) or more	10	White	6H	Upper-lower Surface Milling	Q (+0.2/0)	-	20 ～ 400	20 ～ 250	-	6 ～ 195.5	6 ～ 245.5	-	3 ～ 10	5 ～ 29
-	1 Piece(s)	8 Day(s) or more	10	White	6H	Upper-lower Surface Milling	Q (+0.2/0)	-	20 ～ 400	20 ～ 250	3 ～ 10	6 ～ 195.5	6 ～ 245.5	-	-	5 ～ 29
-	1 Piece(s)	6 Day(s) or more	10	White	No Drilling Alteration	Upper-lower Surface Milling	Q (+0.2/0)	-	20 ～ 400	20 ～ 250	-	-	-	-	-	5 ～ 29
-	1 Piece(s)	8 Day(s) or more	10	White	2H	Circular Sawing	-	-	20 ～ 600	20 ～ 500	-	6 ～ 591.5	4.5 ～ 495.5	3 ～ 10	-	5 ～ 30
-	1 Piece(s)	8 Day(s) or more	10	White	2H	Circular Sawing	-	-	20 ～ 600	20 ～ 500	-	6 ～ 591.5	4.5 ～ 495.5	-	3 ～ 10	5 ～ 30
-	1 Piece(s)	8 Day(s) or more	10	White	2H	Circular Sawing	-	-	20 ～ 600	20 ～ 500	3 ～ 10	6 ～ 591.5	4.5 ～ 495.5	-	-	5 ～ 30
-	1 Piece(s)	8 Day(s) or more	10	White	2HL	Circular Sawing	-	-	20 ～ 600	20 ～ 500	-	4.5 ～ 595.5	6 ～ 491.5	3 ～ 10	-	5 ～ 30
-	1 Piece(s)	8 Day(s) or more	10	White	2HL	Circular Sawing	-	-	20 ～ 600	20 ～ 500	-	4.5 ～ 595.5	6 ～ 491.5	-	3 ～ 10	5 ～ 30
-	1 Piece(s)	8 Day(s) or more	10	White	2HL	Circular Sawing	-	-	20 ～ 600	20 ～ 500	3 ～ 8	4.5 ～ 595.5	6 ～ 491.5	-	-	5 ～ 30
-	1 Piece(s)	6 Day(s) or more	10	White	No Drilling Alteration	4-side Milling	-	M (0/-0.2)	10 ～ 400	10 ～ 200	-	-	-	-	-	5 ～ 30
-	1 Piece(s)	6 Day(s) or more	10	White	No Drilling Alteration	4-side Milling	-	N (±0.1)	10 ～ 400	10 ～ 200	-	-	-	-	-	5 ～ 30
-	1 Piece(s)	6 Day(s) or more	10	White	No Drilling Alteration	4-side Milling	-	Q (+0.2/0)	10 ～ 400	10 ～ 200	-	-	-	-	-	5 ～ 30
-	1 Piece(s)	8 Day(s) or more	10	White	4H	Circular Sawing	-	-	20 ～ 600	20 ～ 500	-	6 ～ 591.5	6 ～ 491.5	3 ～ 10	-	5 ～ 30
-	1 Piece(s)	8 Day(s) or more	10	White	4H	Circular Sawing	-	-	20 ～ 600	20 ～ 500	-	6 ～ 591.5	6 ～ 491.5	-	3 ～ 10	5 ～ 30
-	1 Piece(s)	8 Day(s) or more	10	White	4H	Circular Sawing	-	-	20 ～ 600	20 ～ 500	3 ～ 10	6 ～ 591.5	6 ～ 491.5	-	-	5 ～ 30
-	1 Piece(s)	6 Day(s) or more	10	White	No Drilling Alteration	6-surface Milling	M (0/-0.2)	M (0/-0.2)	10 ～ 400	10 ～ 200	-	-	-	-	-	5 ～ 29
-	1 Piece(s)	6 Day(s) or more	10	White	No Drilling Alteration	6-surface Milling	M (0/-0.2)	N (±0.1)	10 ～ 400	10 ～ 200	-	-	-	-	-	5 ～ 29
-	1 Piece(s)	6 Day(s) or more	10	White	No Drilling Alteration	6-surface Milling	M (0/-0.2)	Q (+0.2/0)	10 ～ 400	10 ～ 200	-	-	-	-	-	5 ～ 29
-	1 Piece(s)	6 Day(s) or more	10	White	No Drilling Alteration	6-surface Milling	N (±0.1)	M (0/-0.2)	10 ～ 400	10 ～ 200	-	-	-	-	-	5 ～ 29
-	1 Piece(s)	6 Day(s) or more	10	White	No Drilling Alteration	6-surface Milling	N (±0.1)	N (±0.1)	10 ～ 400	10 ～ 200	-	-	-	-	-	5 ～ 30
-	1 Piece(s)	6 Day(s) or more	10	White	No Drilling Alteration	6-surface Milling	N (±0.1)	Q (+0.2/0)	10 ～ 400	10 ～ 200	-	-	-	-	-	5 ～ 29
-	1 Piece(s)	6 Day(s) or more	10	White	No Drilling Alteration	6-surface Milling	Q (+0.2/0)	M (0/-0.2)	10 ～ 400	10 ～ 200	-	-	-	-	-	5 ～ 29
-	1 Piece(s)	6 Day(s) or more	10	White	No Drilling Alteration	6-surface Milling	Q (+0.2/0)	N (±0.1)	10 ～ 400	10 ～ 200	-	-	-	-	-	5 ～ 29
-	1 Piece(s)	6 Day(s) or more	10	White	No Drilling Alteration	6-surface Milling	Q (+0.2/0)	Q (+0.2/0)	10 ～ 400	10 ～ 200	-	-	-	-	-	5 ～ 29

More Information

[ ! ]Properties >> P.953

[ ! ]For Plastic Blocks, see P.1024.

Product TOP

Basic Information

Material	Polyacetal	Grade	Standard	Material Name	Polyacetal (POM, Duracon)

Configure

134 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Color
- White
- Black
Clear
Hole Drilling
No Drilling Alteration

2H

2HL

4H

6H
Clear
Finishing
- 4-side Milling
- 6-surface Milling
- Circular Sawing
- Guaranteed Perpendicularity of Circular Sawing
- Upper-lower Surface Milling
Clear
T Dimension Tolerance
- M (0/-0.2)
- N (±0.1)
- Q (+0.2/0)
Clear
AB Dimension Tolerance
- M (0/-0.2)
- N (±0.1)
- Q (+0.2/0)
Clear
A(mm)
[10-400/0.1mm Unit(s)][20-500/0.5mm Unit(s)][20-600/1mm Unit(s)]
Clear
B(mm)
[10-200/0.1mm Unit(s)][20-400/0.5mm Unit(s)][20-500/1mm Unit(s)]
Clear
Counterbore Hole Z(mm)
3

4

5

6

8

10
Clear
F
[4.5-595.5/0.5]
Clear
G
[4.5-495.5/0.5]
Clear
M
3

4

5

6

8

10
Clear
N
3

4

5

6

8

10
Clear
T(mm)
5

6

8

10

12

15

20

25

30

40

50

60
[5-30/0.1mm Unit(s)]
Clear
type
- PAA
- PABA
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

6 Day(s) or Less

8 Day(s) or Less

10 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Additional Products in this Category

Complementary Products

Plastic Cover Plates - L-Shaped
MISUMI Days to Ship : 5 Day(s) or more

Customers Who Viewed This Item Also Viewed

MC Nylon® Plates-Standard / Sliding / High Strength / Conductivity / Weather Resistance Grade
MISUMI

Days to Ship : 6 Day(s) or more
ABS Plates
MISUMI

Days to Ship : 8 Day(s) or more
Bakelite Plates-Paper Type, Cloth Type
MISUMI

Days to Ship : 6 Day(s) or more
Plastic Blocks
MISUMI

Standard Price : MYR 30.81-

Days to Ship : 4 Day(s) or more
Fluororesin Plates-Standard
MISUMI

Days to Ship : 8 Day(s) or more
Configurable Plates - Aluminum - A5052P (Aℓ-Mg Aluminum Alloy)
MISUMI

Days to Ship : 8 Day(s) or more
Acrylic Plate -Cast Type -Custom Size
MISUMI

Days to Ship : 6 Day(s) or more
Ultra High-Molecular-Weight Polyethylene Plates-Standard / Conductive Grade
MISUMI

Days to Ship : 8 Day(s) or more
Resin Rods - Exterior Surface Unfinished
MISUMI

Days to Ship : 6 Day(s) or more
PEEK Plates-Standard / Sliding / Conductive Grade
MISUMI

Days to Ship : 6 Day(s) or more
Polycarbonate Plates -High Impact Resistance
MISUMI

Days to Ship : 10 Day(s) or more
Resin Rods - Exterior Surface Finished - Standard/ O.D. Configurable
MISUMI

Days to Ship : 5 Day(s) or more

back next

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations): Tel：(60) 3 7890 6399; 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday); Technical Inquiry

How can we improve?

Polyacetal Plates-Standard / Antistatic Grade

(i)Caution

Specifications

Alterations

Part Number

More Information

Basic Information

Configure

Specification/Dimensions

Color

Hole Drilling

Finishing

T Dimension Tolerance

AB Dimension Tolerance

A(mm)

B(mm)

Counterbore Hole Z(mm)

F

G

M

N

T(mm)

type

CAD

Days to Ship

Specify Alterations

Additional Products in this Category

Complementary Products

Customers Who Viewed This Item Also Viewed

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm