[Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

PET Plates (Part Numbers)

MISUMI

[Standard large quantity available] 10% discount for 21 to 100 pieces without the need for an estimate.

(i)Caution

Due to the discontinuation of production at the material manufacturer, the sales of 4 mm thickness PYBA had ended at the end of March 2026. The recommended alternative is 5 mm thickness PYBA.
Please check the content on our website as the PDF does not contain the most up-to-date information.

Part Number

Configured Part Number is shown.

Drawing/Specifications
3D Preview
Part Numbers
More Information
Catalog
Technical Information

Drawing

■Number of Holes Combination Type (With Corner Holes Pre-Drilled)

■Number of Holes Combination Table ■Part Number Ordering Codes

Ex. If the number of holes on the A-side is 3 and the number of holes on the B-side is 3, then PYA33W8.
[!] The formula for calculating the total number of holes is 2a + 2b - 4. When a and b are 1, then a × b.

	Machining Method	Surface texture
4 Sides	Circular sawing
Upper-Lower Surface	Material

[ ! ] The roughness values of the material surface are for reference only.

[!] The pitch between holes is equally divided. The formula for calculating the pitch is ap = (A - 2C)/(a - 1), bp = (B - 2D)/(b - 1).
[!] When the number of holes per side is 1, the (C) and (D) dimensions are not applied to the holes from the end face. (Asymmetrical machining)

[ ! ] Only burrs generated on the cut part are removed.
To prevent cuts on the corners, please specify additional machining for 4 corners of the same size.

Hole Machining Details

N (Through Hole)

P (Countersink)

M (Threaded Insert)

Hole Machining Conditions (N・P·M)

Ordering Code (Example) M4-L6
[ ! ]L ≤ T－1

Bolt Nominal Dia.	3	4	5	6	8	10
d	3.5	4.5	5.5	6.5	9	11
d₁	7.5	9.5	11.5	13.5	19	—
h	2	2.5	3	3.5	5	—

■Table 1

Bolt Nominal Dia.	3	4
d	3.5	4.5
L	3	4
	4.5	6
	6	8

Nominal Dia.	b (Min. Value)
3 to 10	2.5

Q (Keyhole)

Hole Machining Condition Q (Keyhole)

* Keyhole Reference Position

[ ! ] Keyhole Machining Condition c ≥ 5
PET Plates: Related Image

Keyhole Nominal Dia.	5	6	8
d₁	6	7	9
d₂	14	16	20
h	11	12	15

[ ! ] Use with
flat washers to
prevent damage to the resin.

"Keyhole Position"
(1): The center of bp dimension is consistent with the center of D dimension.
(2): When there are 3 or more holes on one side, the pitch is equally divided around d₁.
　
(3): The center of diameter d₁ for the keyhole is consistent with the value for the center of C(D).

■Number of Holes Combination Type (No Corner Drilling)

■Number of Holes Combination Table ■Part Number Ordering Codes

Ex. If the number of holes on the A-side is 2 and the number of holes on the B-side is 2, then PYA22W8.
[ ! ] The formula for calculating the total number of holes is 2a + 2b.

	Machining Method	Surface texture
4 Sides	Circular sawing
Upper-Lower Surface	Material

[ ! ] The roughness values of the material surface are for reference only.

[!] The pitch between holes is equally divided. The formula for calculating the pitch is ap = (A - 2C)/(a - 1), bp = (B - 2S)/(b - 1).

[ ! ] Only burrs generated on the cut part are removed.
To prevent cuts on the corners, please specify additional machining for 4 corners of the same size.

Hole Machining Details

N (Through Hole)

P (Countersink)

M (Threaded Insert)

Hole Machining Conditions (N・P·M)

Ordering Code (Example) M4-L6
[ ! ]L ≤ T－1

Bolt Nominal Dia.	3	4	5	6	8	10
d	3.5	4.5	5.5	6.5	9	11
d₁	7.5	9.5	11.5	13.5	19	—
h	2	2.5	3	3.5	5	—

■Table 1

Bolt Nominal Dia.	3	4
d	3.5	4.5
L	3	4
	4.5	6
	6	8

Nominal Dia.	b (Min. Value)
3 to 10	2.5

Q (Keyhole)

Hole Machining Condition Q (Keyhole)

* Keyhole Reference Position

[ ! ] Keyhole Machining Condition c ≥ 5
PET Plates: Related Image

Keyhole Nominal Dia.	5	6	8
d₁	6	7	9
d₂	14	16	20
h	11	12	15

[ ! ] Use with
flat washers to
prevent damage to the resin.

"Keyhole Position"
(1): The center of bp dimension is consistent with the center of D dimension.
(2): When there are 3 or more holes on one side, the pitch is equally divided around d₁.
　
(3): The center of the diameter d₁ for the keyhole is consistent with the value for the center of D(R).

■ Hole Machined Type

Finish	4 Sides		Upper-Lower Surface
Finish	Machining Method	Surface texture	Machining Method	Surface texture
Circular sawing	Circular sawing		Material

[ ! ] The roughness values of the material surface are for reference only.

2H2HL4H6H8H

[ ! ]A ≥ B

Hole Machining Details

N (Through Hole)

P (Countersink)

M (Threaded Insert)

Hole Machining Conditions (N·P·M)

Q (Keyhole)

Hole Machining Condition Q (Keyhole)

Ordering Code (Example) M4−L6
[ ! ]L ≤ T－1

* Keyhole Reference Position

[ ! ] Keyhole Machining Condition a ≥ 5 b ≥ 5 c ≥ 5

2H·4H·6H·8H2HL

"Keyhole Position"
(1): For 2H, the center of diameter d₁ is consistent with G..
(2): For 4H and 6H, the center of G dimension is consistent with the center of B dimension.
(3): For 8H, the center of diameter d₁ of the middle keyhole is consistent with the center of B dimension.

(4): For 2HL, keyholes turn sideways and the center of diameter d₁ is consistent with F.

Bolt Nominal Dia.	3	4	5	6	8	10
d	3.5	4.5	5.5	6.5	9	11
d₁	7.5	9.5	11.5	13.5	19	—
h	2	2.5	3	3.5	5	—

■Table 1

Bolt Nominal Dia.	3	4
d	3.5	4.5
L	3	4
	4.5	6
	6	8

Nominal Dia.	b (Min. Value)
3 to 10	2.5

Keyhole Nominal Dia.	5	6	8
d₁	6	7	9
d₂	14	16	20
h	11	12	15

[ ! ] Use with
flat washers to
prevent damage to the resin.

■ Standard Type

[ ! ]A ≥ B

Finish	4 Sides		Upper-Lower Surface
Finish	Machining Method	Surface texture	Machining Method	Surface texture
Circular sawing	Circular sawing		Material

[ ! ] The roughness values of the material surface are for reference only.

Product Specifications

Type	[M]Grade	Color	Light transmittance *	Operating Ambient Temperature
PYA	Standard	Transparent	87%	－15 to 55°C
PYBA	Standard	Brown Smoke	28%
PYDA	Standard	Orange	45%
PYTA	Antistatic	Transparent	77%
PYBTA	Antistatic	Brown Smoke	30%

* For transmittance data by wavelength, check

technical information at the
bottom for details.

			PET
Item	JIS testing method	Unit	Standard	Antistatic
Item	JIS testing method	Unit	PYA PYBA PYDA	PYTA PYBTA
Flame Resistance	—	—	Up to 2 t HB equivalent 3 t to V-2	—
Chemical Resistance
Oil	—	—	○	○
Acid	—	—	✖	✖
Alkali	—	—	✖～△	✖～△
Organic Solvent	—	—	✖	✖

[ ! ] Listed values are for reference, not guaranteed.

Part Number Display Method

■Number of Holes Combination Type (With Corner Holes Pre-Drilled)

Part Number	—	A	—	B	—	T	—	C	—	D	—	Screw Nominal Dia.
PYA33W8	—	200	—	100	—	5	—	C20	—	D10	—	N5

■Number of Holes Combination Type (No Corner Drilling)

Part Number	—	A	—	B	—	T	—	C	—	D	—	R	—	S	—	Screw Nominal Dia.
PYA22V8	—	200	—	100	—	5	—	C60	—	d₂ 0	—	R20	—	S60	—	N5

■ Hole Machined Type

Part Number	—	A	—	B	—	T	—	F	—	G	—	Screw Nominal Dia.	—	L
PYBA4H PYA4H	— —	900 850	— —	700 500	— —	4 5	— —	F750 F450	— —	G650 G300	— —	P4 M4	—	L4

■Standard Size

Part Number	—	A	—	B	—	T
PYA	—	1200	—	800	—	8

■Large Size

Part Number	—	A	—	B	—	T
L−PYA	—	1300	—	800	—	3

Specification Table

■Number of Holes Combination Type (With Corner Holes Pre-Drilled)

Part Number						A	B	T Selection			Hole position indication		Bolt Nominal Dia. Selection
Type	combination of holes										C	D	Through Hole	Countersunk Hole					Keyhole	Threaded Insert
	Side A Number of Holes	Side B Number of Holes	Hole Machining Shape	Number of Holes		1 mm Increments		PYA	PYBA	PYDA PYTA PYBTA	0.5 mm Increments Unit		N	P					Q	M		L
PYA PYBA PYDA PYTA PYBTA	1 2 3 4 5	1 2 3 4 5	W	1 3 5 8 12 16	2 4 6 10 14	20 ～ 1200	20 ～ 1000	1	—	—	6 ～ 1191.5	6 ～ 991.5	3 4 5 6 8 10	—					5 6 8	—		Select from Table 1
								2	—	—				—						—
								3	3	3				3						—
								4	4	—				3	4	5				3
								5	5	5				3	4	5	6			3	4
								8	—	—					4	5	6	8		3	4

[!] Dimension C and D Specification Range: Please specify after confirming the processing conditions in the drilling details.
When drilling through holes or countersunk holes, a distance of 2.5 mm or more is required between the holes or between the end faces and holes. A diameter of 5 mm or more is required for keyholes.
● T Dimension Tolerance

T	T Dimension Tolerance
1	±0.15
2·3	±0.2
4·5	±0.3
8	±0.6

● Dimension tolerance of A and B ±1.0
Same as standard type.

■Number of Holes Combination Type (No Corner Drilling)

Part Number					A	B	T Selection			Hole position indication				Bolt Nominal Dia. Selection
Type	combination of holes									C	D	R	S	Through Hole	Countersunk Hole					Keyhole	Threaded Insert
	Side A Number of Holes	Side B Number of Holes	Hole Machining Shape	Number of Holes	1 mm Increments		PYA	PYBA	PYDA PYTA PYBTA	0.5 mm Increments				N	P					Q	M		L
PYA PYBA PYDA PYTA PYBTA	1 2 3 4	1 2 3 4	V	4 6 8 10 12 14 16	20 ～ 1200	20 ～ 1000	1	—	—	6 ～ 1191.5	6 ～ 991.5	6 ～ 1191.5	6 ～ 991.5	3 4 5 6 8 10	—					5 6 8	—		Select from Table 1
							2	—	—						—						—
							3	3	3						3						—
							4	4	—						3	4	5				3
							5	5	5						3	4	5	6			3	4
							8	—	—							4	5	6	8		3	4

[!] Dimension C, D, R, and S Specification Range: Please specify after confirming the processing conditions in the drilling details.
When drilling through holes, countersunk holes or threaded inserts, a distance of 2.5 mm or more is required between the holes or between the end faces and holes. A diameter of 5 mm or more is required for keyholes.
● T Dimension Tolerance

T	T Dimension Tolerance
1	±0.15
2·3	±0.2
4·5	±0.3
8	±0.6

● Dimension tolerance of A and B ±1.0
Same as standard type.

■ Hole Machined Type

Part Number		A	B	T Selection			F	G	Bolt Nominal Dia. Selection
									Through Hole	Countersunk Hole					Keyhole	Threaded Insert
Type	Number of Holes	1 mm Increments		PYA	PYBA	PYDA PYTA PYBTA	0.5 mm Increments		N	P					Q	M		L
PYA (Standard, Transparent) PYBA (Standard, Smoke Brown) PYDA (Standard, Orange) PYTA (Antistatic, Transparent) PYBTA (Antistatic, Smoke Brown)	2H(Horizontal) 2HL(Vertical) 4H 6H 8H	20 to 1200	20 to 1000	1	—	—	6 to 1191.5 (2H·4H) 4.5 to 1195.5 (2HL) 6 to 595.5 (6H·8H)	4.5 to 995.5 (2H) 6 to 991.5 (2HL·4H·6H) 6 to 495.5 (8H)	3 4 5 6 8 10	—					5 6 8	—		Select from Table 1
				2	—	—				—						—
				3	3	3				3						—
				4	4	—				3	4	5				3
				5	5	5				3	4	5	6			3	4
				8	—	—					4	5	6	8		3	4

[!] Dimension F Specification Range – 2H/4H type selection: d (d₁) + 2.5 ≤ F ≤ A - d (d₁) - 5; for 2HL: d (d₁)/2 + 2.5 ≤ F ≤ A − d (d₁)/2 - 2.5;
for 6H and 8H: d (d₁) + 2.5 ≤ F ≤ (A - d (d₁) - 5)/2 is required.
[!]Dimension G Specification Range – 2H type selection: d (d₁)/2 + 2.5 ≤ G ≤ B - d (d₁)/2 - 2.5; for 2HL, 4H and 6H: d (d₁) + 2.5 ≤ G ≤ B - d (d₁) - 5;
for 8H: d (d₁) + 2.5 ≤ G ≤ (B - d (d₁) - 5)/2 is required. (d for through hole, d₁ for countersunk)
● T Dimension Tolerance

T	T Dimension Tolerance
1	±0.15
2·3	±0.2
4·5	±0.3
8	±0.6

● Dimension tolerance of A and B ±1.0

■ Standard Type

Part Number	A	B	T
Standard Size	1 mm Increments		Selection
PYA (Standard, Transparent)	20 to 1200	20 to 1000	1·2·3·4·5·8
PYBA (Standard, Smoke Brown)			3·4·5
PYDA (Standard, Orange) PYTA (Antistatic, Transparent) PYBTA (Antistatic, Smoke Brown)			3·5
Large Size	1201 to 2000	20 to 1000	3·5
L−PYA (Standard, Transparent) L−PYBA (Standard, Smoke Brown) L−PYDA (Standard, Orange) L−PYTA (Antistatic, Transparent) L−PYBTA (Antistatic, Smoke Brown)

● T Dimension Tolerance

T	T Dimension Tolerance
1	±0.15
2·3	±0.2
4·5	±0.3
8	±0.6

● Dimension tolerance of A and B ±1.0

Alterations

■Number of Holes Combination Type (With Corner Holes Pre-Drilled)

Part Number	—	A	—	B	—	T	—	C	—	D	—	Screw Nominal Dia.	—	(Alterations)
PYA33W8	—	200	—	100	—	5	—	C20	—	D10	—	N5	—	ACC

Alterations

Same Dimension Machining for 4 Corners

Code

ACC

ACR

Spec.

All four corners can be cut and
radius machined to the same dimensions (5 mm).
·ACC: Corner 5 mm Cut
·ACR: Corner 5 mm Radius Machining

[ ! ] For the machining conditions of the hole and plate end face, see
Hole Machining Conditions under Hole Machining Details
see hole machining conditions
under hole machining details

Hole Machining Type	b (Min. Value)
Through Hole / Countersunk Hole Threaded Insert	2.5
Keyhole	5

■Number of Holes Combination Type (No Corner Drilling)

Part Number	—	A	—	B	—	T	—	C	—	D	—	R	—	S	—	Screw Nominal Dia.	—	(Alterations)
PYA22V8	—	200	—	100	—	5	—	C60	—	D20	—	R20	—	S60	—	N5	—	ACR

Alterations

Same Dimension Machining for 4 Corners

Code

ACC

ACR

Spec.

All four corners can be cut and
radius machined to the same dimensions (5 mm).
·ACC: Corner 5 mm Cut
·ACR: Corner 5 mm Radius Machining

[ ! ] For the machining conditions of the hole and plate end face, see
Hole Machining Conditions under Hole Machining Details
see hole machining conditions
under hole machining details

Hole Machining Type	b (Min. Value)
Through Hole / Countersunk Hole Threaded Insert	2.5
Keyhole	5

■ Hole Machined Type

Part Number	—	A	—	B	—	T	—	F	—	G	—	Screw Nominal Dia.	—	(XC·YC)
PYA4H	—	200	—	100	—	4	—	F160	—	G50	—	N6	—	YC35

Alterations

Hole Position from Left

Hole Position from Bottom

Same Dimension Machining for 4 Corners

Code

ACC

ACR

Spec.

XC = 0.5 mm Increments

[ ! ] For the machining conditions of the hole and plate end face, see Hole Machining Conditions under Hole Machining Details
[ ! ] For the machining conditions of the hole and plate end face, see Hole Machining Conditions under Hole Machining Details
　

[ ! ] Can be specified only for Hole Machined Type (2H to 8H)

YC = 0.5 mm Increments

[ ! ] For the machining conditions of the hole and plate end face, see Hole Machining Conditions under Hole Machining Details 　

[ ! ] Can be specified only for Hole Machined Type (2H to 8H)

All four corners can be cut and
radius machined to the same dimensions (5 mm).
·ACC: Corner 5 mm Cut
·ACR: Corner 5 mm Radius Machining

[ ! ] For the machining conditions of the hole and plate end face, see
Hole Machining Conditions under Hole Machining Details
see hole machining conditions
under hole machining details

Hole Machining Type	b (Min. Value)
Through Hole / Countersunk Hole Threaded Insert	2.5
Keyhole	5

■ Standard Type

Alterations	Aluminum Extrusion Blind Joint Notch	Relief at 4 Corners	Corner Cut, Corner Radius Machining	Same Dimension Machining for 4 Corners

Code	F□□, E□□, J□□, K□□	CN	CCA·CCB·CCC·CCD CRA·CRB·CRC·CRD	ACC	ACR
Spec.	Machines relief for blind joints of aluminum extrusions. 　 [ ! ] Can only be specified for the standard sizes of standard types	Machines relief at 4 corners. CN = 1 mm Increments [ ! ]5 ≤ CN ≤ 50 　Ordering Code CN = 25→CN25 [ ! ] Can only be specified for the standard sizes of standard types	Machines any corner (ABCD) upon request. 5 mm increments ·CCA5 = A Corner 5 mm Cut ·CRB5 = B Corner 5 mm Radius Machining [ ! ] Can only be specified for the standard sizes of standard types [ ! ] Cannot be combined with Same Dimension Machining for 4 Corners	All four corners can be cut and radius machined to the same dimensions (5 mm). ·ACC: Corner 5 mm Cut ·ACR: Corner 5 mm Radius Machining [ ! ] For the machining conditions of the hole and plate end face, see Hole Machining Conditions under Hole Machining Details

[NG] Alterations are not available for Hole Machined Type.
[ ! ] Alteration can only be specified for the standard sizes

Technical Information

Transmittance Curve on Each Wavelength

Transmittance Curve on Each Wavelength (3 mm)Transmittance Curve on Each Wavelength (5 mm)

[ ! ] The above data are for reference, not guaranteed.

Specifications

■Standard Size

Part Number	-	A	-	B	-	T
PYA	-	1200	-	800	-	8

■Large Size

Part Number	-	A	-	B	-	T
L-PYA	-	1300	-	800	-	3

■Hole Machining

Part Number	-	A	-	B	-	T	-	F	-	G	-	Screw Nominal Dia.	-	L
PYBA4H PYA4H	- -	900 850	- -	700 500	- -	4 5	- -	F750 F450	- -	G650 G300	- -	P4 M4	-	L4

■Standard Type

Part Number	A	B	T
Standard Size	1mm Increment		Selection
PYA (Standard, Transparent)	20~1200	20~1000	1, 2, 3, 4, 5, 8
PYBA (Standard, Smoke Brown)			3, 4, 5
PYDA (Standard, Orange) PYTA (Antistatic, Transparent) PYBTA (Antistatic, Smoke Brown)			3, 5
Large Size	1201~2000	20~1000	3, 5
L-PYA (Standard, Transparent) L-PYBA (Standard, Smoke Brown) L-PYDA (Standard, Orange) L-PYTA (Antistatic, Transparent) L-PYBTA (Antistatic, Smoke Brown)

[ ! ]For T0.5 / 1.5, see P.973.

• T Dimension Tolerance

T	T Dimension Tolerance
1	±0.15
2, 3	±0.2
4, 5	±0.3
8	±0.6

• Dimension Tolerance of A and B ±1.0

■Pre-drilled Type

Part Number		A	B	T			F	G	Screw Nominal Dia.
									Through Hole	Countersink					Keyhole	Threaded Insert
Type	Number of Holes	1mm Increment		PYA	PYBA	PYDA PYTA PYBTA	0.5mm Increment		N	P					Q	M		L
PYA (Standard, Transparent) PYBA (Standard, Smoke Brown) PYDA (Standard, Orange) PYTA (Antistatic, Transparent) PYBTA (Antistatic, Smoke Brown)	2H (Horizontal) 2HL (Vertical) 4H 6H 8H	20~1200	20~1000	1	-	-	6~1191.5 (2H, 4H) 4.5~1195.5 (2HL) 6~595.5 (6H, 8H)	4.5~995.5 (2H) 6~991.5 (2HL, 4H, 6H) 6~495.5 (8H)	3 4 5 6 8 10	-					5 6 8	-		Select from Table 1
				2	-	-				-						-
				3	3	3				3						-
				4	4	-				3	4	5				3
				5	5	5				3	4	5	6			3	4
				8	-	-					4	5	6	8		3	4

[ ! ]Dimension F Specification Range For 2H and 4H: d(d₁)+2.5≤F≤A-d(d₁)-5; for 2HL: d(d₁)/2+2.5≤F≤A-d(d₁)/2-2.5;
for 6H and 8H: d(d₁)+2.5≤F≤(A-d(d₁)-5)/2.
[ ! ]Dimension G Specification Range For 2H: d(d₁)/2+2.5≤G≤B-d(d₁)/2-2.5; for 2HL, 4H and 6H: d(d₁)+2.5≤G≤B-d(d₁)-5;
for 8H: d(d₁)+2.5≤G≤(B-d(d₁)-5)/2. (d for through hole, d₁ for countersink.)

Alterations

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 60; 90

Part Number
L-PYA-[1201-2000/1]-[1-8/1]-[3,5]
L-PYBA-[1201-2000/1]-[1-8/1]-[3,5]
L-PYBTA-[1201-2000/1]-[1-8/1]-[3,5]
L-PYDA-[1201-2000/1]-[1-8/1]-[3,5]
L-PYTA-[1201-2000/1]-[1-8/1]-[3,5]
PYA2H-[20-1200/1]-[20-1000/1]-[1,2,3,4,5,8]-F[6-1191.5/0.5]-G[4.5-995.5/0.5]-M[3,4]
PYA2H-[20-1200/1]-[20-1000/1]-[1,2,3,4,5,8]-F[6-1191.5/0.5]-G[4.5-995.5/0.5]-N[3,4,5,6,8,10]
PYA2H-[20-1200/1]-[20-1000/1]-[1,2,3,4,5,8]-F[6-1191.5/0.5]-G[4.5-995.5/0.5]-P[3,4,5,6,8]
PYA2H-[20-1200/1]-[20-1000/1]-[1,2,3,4,5,8]-F[6-1191.5/0.5]-G[4.5-995.5/0.5]-Q[5,6,8]
PYA2HL-[20-1200/1]-[20-1000/1]-[1,2,3,4,5,8]-F[4.5-1195.5/0.5]-G[6-991.5/0.5]-M[3,4]
PYA2HL-[20-1200/1]-[20-1000/1]-[1,2,3,4,5,8]-F[4.5-1195.5/0.5]-G[6-991.5/0.5]-N[3,4,5,6,8,10]
PYA2HL-[20-1200/1]-[20-1000/1]-[1,2,3,4,5,8]-F[4.5-1195.5/0.5]-G[6-991.5/0.5]-P[3,4,5,6]
PYA2HL-[20-1200/1]-[20-1000/1]-[1,2,3,4,5,8]-F[4.5-1195.5/0.5]-G[6-991.5/0.5]-Q[5,6,8]
PYA4H-[20-1200/1]-[20-1000/1]-[1,2,3,4,5,8]-F[6-1191.5/0.5]-G[6-991.5/0.5]-M[3,4]
PYA4H-[20-1200/1]-[20-1000/1]-[1,2,3,4,5,8]-F[6-1191.5/0.5]-G[6-991.5/0.5]-N[3,4,5,6,8,10]
PYA4H-[20-1200/1]-[20-1000/1]-[1,2,3,4,5,8]-F[6-1191.5/0.5]-G[6-991.5/0.5]-P[3,4,5,6,8]
PYA4H-[20-1200/1]-[20-1000/1]-[1,2,3,4,5,8]-F[6-1191.5/0.5]-G[6-991.5/0.5]-Q[5,6,8]
PYA6H-[20-1200/1]-[20-1000/1]-[1,2,3,4,5,8]-F[6-595.5/0.5]-G[6-991.5/0.5]-M[3,4]
PYA6H-[20-1200/1]-[20-1000/1]-[1,2,3,4,5,8]-F[6-595.5/0.5]-G[6-991.5/0.5]-N[3,4,5,6,8,10]
PYA6H-[20-1200/1]-[20-1000/1]-[1,2,3,4,5,8]-F[6-595.5/0.5]-G[6-991.5/0.5]-P[3,4,5,6,8]
PYA6H-[20-1200/1]-[20-1000/1]-[1,2,3,4,5,8]-F[6-595.5/0.5]-G[6-991.5/0.5]-Q[5,6,8]
PYA8H-[20-1200/1]-[20-1000/1]-[1,2,3,4,5,8]-F[6-595.5/0.5]-G[6-495.5/0.5]-M[3,4]
PYA8H-[20-1200/1]-[20-1000/1]-[1,2,3,4,5,8]-F[6-595.5/0.5]-G[6-495.5/0.5]-N[3,4,5,6,8,10]
PYA8H-[20-1200/1]-[20-1000/1]-[1,2,3,4,5,8]-F[6-595.5/0.5]-G[6-495.5/0.5]-P[3,4,5,6,8]
PYA8H-[20-1200/1]-[20-1000/1]-[1,2,3,4,5,8]-F[6-595.5/0.5]-G[6-495.5/0.5]-Q[5,6,8]
PYA-[20-1200/1]-[20-1000/1]-[1,2,3,4,5,8]
PYBA2H-[20-1200/1]-[20-1000/1]-[3,4,5]-F[6-1191.5/0.5]-G[4.5-995.5/0.5]-M[3,4]
PYBA2H-[20-1200/1]-[20-1000/1]-[3,4,5]-F[6-1191.5/0.5]-G[4.5-995.5/0.5]-N[3,4,5,6,8,10]
PYBA2H-[20-1200/1]-[20-1000/1]-[3,4,5]-F[6-1191.5/0.5]-G[4.5-995.5/0.5]-P[3,4,5,6]
PYBA2H-[20-1200/1]-[20-1000/1]-[3,4,5]-F[6-1191.5/0.5]-G[4.5-995.5/0.5]-Q[5,6,8]
PYBA2HL-[20-1200/1]-[20-1000/1]-[3,4,5]-F[4.5-1195.5/0.5]-G[6-991.5/0.5]-M[3,4]
PYBA2HL-[20-1200/1]-[20-1000/1]-[3,4,5]-F[4.5-1195.5/0.5]-G[6-991.5/0.5]-N[3,4,5,6,8,10]
PYBA2HL-[20-1200/1]-[20-1000/1]-[3,4,5]-F[4.5-1195.5/0.5]-G[6-991.5/0.5]-P[3,4,5,6]
PYBA2HL-[20-1200/1]-[20-1000/1]-[3,4,5]-F[4.5-1195.5/0.5]-G[6-991.5/0.5]-Q[5,6,8]
PYBA4H-[20-1200/1]-[20-1000/1]-[3,4,5]-F[6-1191.5/0.5]-G[6-991.5/0.5]-M[3,4]
PYBA4H-[20-1200/1]-[20-1000/1]-[3,4,5]-F[6-1191.5/0.5]-G[6-991.5/0.5]-N[3,4,5,6,8,10]
PYBA4H-[20-1200/1]-[20-1000/1]-[3,4,5]-F[6-1191.5/0.5]-G[6-991.5/0.5]-P[3,4,5,6]
PYBA4H-[20-1200/1]-[20-1000/1]-[3,4,5]-F[6-1191.5/0.5]-G[6-991.5/0.5]-Q[5,6,8]
PYBA6H-[20-1200/1]-[20-1000/1]-[3,4,5]-F[6-595.5/0.5]-G[6-991.5/0.5]-M[3,4]
PYBA6H-[20-1200/1]-[20-1000/1]-[3,4,5]-F[6-595.5/0.5]-G[6-991.5/0.5]-N[3,4,5,6,8,10]
PYBA6H-[20-1200/1]-[20-1000/1]-[3,4,5]-F[6-595.5/0.5]-G[6-991.5/0.5]-P[3,4,5,6]
PYBA6H-[20-1200/1]-[20-1000/1]-[3,4,5]-F[6-595.5/0.5]-G[6-991.5/0.5]-Q[5,6,8]
PYBA8H-[20-1200/1]-[20-1000/1]-[3,4,5]-F[6-595.5/0.5]-G[6-495.5/0.5]-M[3,4]
PYBA8H-[20-1200/1]-[20-1000/1]-[3,4,5]-F[6-595.5/0.5]-G[6-495.5/0.5]-N[3,4,5,6,8,10]
PYBA8H-[20-1200/1]-[20-1000/1]-[3,4,5]-F[6-595.5/0.5]-G[6-495.5/0.5]-P[3,4,5,6]
PYBA8H-[20-1200/1]-[20-1000/1]-[3,4,5]-F[6-595.5/0.5]-G[6-495.5/0.5]-Q[5,6,8]
PYBA-[20-1200/1]-[20-1000/1]-[3,4,5]
PYBTA2H-[20-1200/1]-[20-1000/1]-[3,5]-F[6-1191.5/0.5]-G[4.5-995.5/0.5]-M[3,4]
PYBTA2H-[20-1200/1]-[20-1000/1]-[3,5]-F[6-1191.5/0.5]-G[4.5-995.5/0.5]-N[3,4,5,6,8,10]
PYBTA2H-[20-1200/1]-[20-1000/1]-[3,5]-F[6-1191.5/0.5]-G[4.5-995.5/0.5]-P[3,4,5,6]
PYBTA2H-[20-1200/1]-[20-1000/1]-[3,5]-F[6-1191.5/0.5]-G[4.5-995.5/0.5]-Q[5,6,8]
PYBTA2HL-[20-1200/1]-[20-1000/1]-[3,5]-F[4.5-1195.5/0.5]-G[6-991.5/0.5]-M[3,4]
PYBTA2HL-[20-1200/1]-[20-1000/1]-[3,5]-F[4.5-1195.5/0.5]-G[6-991.5/0.5]-N[3,4,5,6,8,10]
PYBTA2HL-[20-1200/1]-[20-1000/1]-[3,5]-F[4.5-1195.5/0.5]-G[6-991.5/0.5]-P[3,4,5,6]
PYBTA2HL-[20-1200/1]-[20-1000/1]-[3,5]-F[4.5-1195.5/0.5]-G[6-991.5/0.5]-Q[5,6,8]
PYBTA4H-[20-1200/1]-[20-1000/1]-[3,5]-F[6-1191.5/0.5]-G[6-991.5/0.5]-M[3,4]
PYBTA4H-[20-1200/1]-[20-1000/1]-[3,5]-F[6-1191.5/0.5]-G[6-991.5/0.5]-N[3,4,5,6,8,10]
PYBTA4H-[20-1200/1]-[20-1000/1]-[3,5]-F[6-1191.5/0.5]-G[6-991.5/0.5]-P[3,4,5,6]
PYBTA4H-[20-1200/1]-[20-1000/1]-[3,5]-F[6-1191.5/0.5]-G[6-991.5/0.5]-Q[5,6,8]
PYBTA6H-[20-1200/1]-[20-1000/1]-[3,5]-F[6-595.5/0.5]-G[6-991.5/0.5]-M[3,4]
PYBTA6H-[20-1200/1]-[20-1000/1]-[3,5]-F[6-595.5/0.5]-G[6-991.5/0.5]-N[3,4,5,6,8,10]
PYBTA6H-[20-1200/1]-[20-1000/1]-[3,5]-F[6-595.5/0.5]-G[6-991.5/0.5]-P[3,4,5,6]
PYBTA6H-[20-1200/1]-[20-1000/1]-[3,5]-F[6-595.5/0.5]-G[6-991.5/0.5]-Q[5,6,8]
PYBTA8H-[20-1200/1]-[20-1000/1]-[3,5]-F[6-595.5/0.5]-G[6-495.5/0.5]-M[3,4]
PYBTA8H-[20-1200/1]-[20-1000/1]-[3,5]-F[6-595.5/0.5]-G[6-495.5/0.5]-N[3,4,5,6,8,10]
PYBTA8H-[20-1200/1]-[20-1000/1]-[3,5]-F[6-595.5/0.5]-G[6-495.5/0.5]-P[3,4,5,6]
PYBTA8H-[20-1200/1]-[20-1000/1]-[3,5]-F[6-595.5/0.5]-G[6-495.5/0.5]-Q[5,6,8]
PYBTA-[20-1200/1]-[20-1000/1]-[3,5]
PYDA2H-[20-1200/1]-[20-1000/1]-[3,5]-F[6-1191.5/0.5]-G[4.5-995.5/0.5]-M[3,4]
PYDA2H-[20-1200/1]-[20-1000/1]-[3,5]-F[6-1191.5/0.5]-G[4.5-995.5/0.5]-N[3,4,5,6,8,10]
PYDA2H-[20-1200/1]-[20-1000/1]-[3,5]-F[6-1191.5/0.5]-G[4.5-995.5/0.5]-P[3,4,5,6]
PYDA2H-[20-1200/1]-[20-1000/1]-[3,5]-F[6-1191.5/0.5]-G[4.5-995.5/0.5]-Q[5,6,8]
PYDA2HL-[20-1200/1]-[20-1000/1]-[3,5]-F[4.5-1195.5/0.5]-G[6-991.5/0.5]-M[3,4]
PYDA2HL-[20-1200/1]-[20-1000/1]-[3,5]-F[4.5-1195.5/0.5]-G[6-991.5/0.5]-N[3,4,5,6,8,10]
PYDA2HL-[20-1200/1]-[20-1000/1]-[3,5]-F[4.5-1195.5/0.5]-G[6-991.5/0.5]-P[3,4,5,6]
PYDA2HL-[20-1200/1]-[20-1000/1]-[3,5]-F[4.5-1195.5/0.5]-G[6-991.5/0.5]-Q[5,6,8]
PYDA4H-[20-1200/1]-[20-1000/1]-[3,5]-F[6-1191.5/0.5]-G[6-991.5/0.5]-M[3,4]
PYDA4H-[20-1200/1]-[20-1000/1]-[3,5]-F[6-1191.5/0.5]-G[6-991.5/0.5]-N[3,4,5,6,8,10]
PYDA4H-[20-1200/1]-[20-1000/1]-[3,5]-F[6-1191.5/0.5]-G[6-991.5/0.5]-P[3,4,5,6]
PYDA4H-[20-1200/1]-[20-1000/1]-[3,5]-F[6-1191.5/0.5]-G[6-991.5/0.5]-Q[5,6,8]
PYDA6H-[20-1200/1]-[20-1000/1]-[3,5]-F[6-595.5/0.5]-G[6-991.5/0.5]-M[3,4]
PYDA6H-[20-1200/1]-[20-1000/1]-[3,5]-F[6-595.5/0.5]-G[6-991.5/0.5]-N[3,4,5,6,8,10]
PYDA6H-[20-1200/1]-[20-1000/1]-[3,5]-F[6-595.5/0.5]-G[6-991.5/0.5]-P[3,4,5,6]
PYDA6H-[20-1200/1]-[20-1000/1]-[3,5]-F[6-595.5/0.5]-G[6-991.5/0.5]-Q[5,6,8]
PYDA8H-[20-1200/1]-[20-1000/1]-[3,5]-F[6-595.5/0.5]-G[6-495.5/0.5]-M[3,4]
PYDA8H-[20-1200/1]-[20-1000/1]-[3,5]-F[6-595.5/0.5]-G[6-495.5/0.5]-N[3,4,5,6,8,10]
PYDA8H-[20-1200/1]-[20-1000/1]-[3,5]-F[6-595.5/0.5]-G[6-495.5/0.5]-P[3,4,5,6,8]
PYDA8H-[20-1200/1]-[20-1000/1]-[3,5]-F[6-595.5/0.5]-G[6-495.5/0.5]-Q[5,6,8]
PYDA-[20-1200/1]-[20-1000/1]-[3,5]
PYTA2H-[20-1200/1]-[20-1000/1]-[3,5]-F[6-1191.5/0.5]-G[4.5-995.5/0.5]-M[3,4]

Standard Unit Price	Minimum order quantity	Days to Ship	RoHS	Color	Grade	Hole Machining	Volume Resistivity Value (Ω･cm)	Shape	A (mm)	B (mm)	F (mm)	G (mm)	M (mm)	N (mm)	P (mm)	Q (mm)	T (mm)
-	1 Piece(s)	7 Day(s) or more	10	Transparent	Standard	No Drilling Alteration	＞10^11	No Hole Machining (Standard Type)	1201 ～ 2000	20 ～ 1000	-	-	-	-	-	-	3 ～ 5
-	1 Piece(s)	12 Day(s) or more	10	Smoke Brown	Standard	No Drilling Alteration	＞10^11	No Hole Machining (Standard Type)	1201 ～ 2000	20 ～ 1000	-	-	-	-	-	-	3 ～ 5
-	1 Piece(s)	12 Day(s) or more	10	Smoke Brown	Antistatic	No Drilling Alteration	＞10^17	No Hole Machining (Standard Type)	1201 ～ 2000	20 ～ 1000	-	-	-	-	-	-	3 ～ 5
-	1 Piece(s)	12 Day(s) or more	10	Orange	Standard	No Drilling Alteration	＞10^11	No Hole Machining (Standard Type)	1201 ～ 2000	20 ～ 1000	-	-	-	-	-	-	3 ～ 5
-	1 Piece(s)	12 Day(s) or more	10	Transparent	Antistatic	No Drilling Alteration	＞10^17	No Hole Machining (Standard Type)	1201 ～ 2000	20 ～ 1000	-	-	-	-	-	-	3 ～ 5
-	1 Piece(s)	12 Day(s) or more	10	Transparent	Standard	2H	＞10^11	Number of Holes Selection Type (With 2H to 8H Holes)	20 ～ 1200	20 ～ 1000	6 ～ 1191.5	4.5 ～ 995.5	3 ～ 4	-	-	-	1 ～ 8
-	1 Piece(s)	12 Day(s) or more	10	Transparent	Standard	2H	＞10^11	Number of Holes Selection Type (With 2H to 8H Holes)	20 ～ 1200	20 ～ 1000	6 ～ 1191.5	4.5 ～ 995.5	-	3 ～ 10	-	-	1 ～ 8
-	1 Piece(s)	12 Day(s) or more	10	Transparent	Standard	2H	＞10^11	Number of Holes Selection Type (With 2H to 8H Holes)	20 ～ 1200	20 ～ 1000	6 ～ 1191.5	4.5 ～ 995.5	-	-	3 ～ 8	-	1 ～ 8
-	1 Piece(s)	12 Day(s) or more	10	Transparent	Standard	2H	＞10^11	Number of Holes Selection Type (With 2H to 8H Holes)	20 ～ 1200	20 ～ 1000	6 ～ 1191.5	4.5 ～ 995.5	-	-	-	5 ～ 8	1 ～ 8
-	1 Piece(s)	12 Day(s) or more	10	Transparent	Standard	2HL	＞10^11	Number of Holes Selection Type (With 2H to 8H Holes)	20 ～ 1200	20 ～ 1000	4.5 ～ 1195.5	6 ～ 991.5	3 ～ 4	-	-	-	1 ～ 8
-	1 Piece(s)	12 Day(s) or more	10	Transparent	Standard	2HL	＞10^11	Number of Holes Selection Type (With 2H to 8H Holes)	20 ～ 1200	20 ～ 1000	4.5 ～ 1195.5	6 ～ 991.5	-	3 ～ 10	-	-	1 ～ 8
-	1 Piece(s)	12 Day(s) or more	10	Transparent	Standard	2HL	＞10^11	Number of Holes Selection Type (With 2H to 8H Holes)	20 ～ 1200	20 ～ 1000	4.5 ～ 1195.5	6 ～ 991.5	-	-	3 ～ 6	-	1 ～ 8
-	1 Piece(s)	12 Day(s) or more	10	Transparent	Standard	2HL	＞10^11	Number of Holes Selection Type (With 2H to 8H Holes)	20 ～ 1200	20 ～ 1000	4.5 ～ 1195.5	6 ～ 991.5	-	-	-	5 ～ 8	1 ～ 8
-	1 Piece(s)	12 Day(s) or more	10	Transparent	Standard	4H	＞10^11	Number of Holes Selection Type (With 2H to 8H Holes)	20 ～ 1200	20 ～ 1000	6 ～ 1191.5	6 ～ 991.5	3 ～ 4	-	-	-	1 ～ 8
-	1 Piece(s)	12 Day(s) or more	10	Transparent	Standard	4H	＞10^11	Number of Holes Selection Type (With 2H to 8H Holes)	20 ～ 1200	20 ～ 1000	6 ～ 1191.5	6 ～ 991.5	-	3 ～ 10	-	-	1 ～ 8
-	1 Piece(s)	12 Day(s) or more	10	Transparent	Standard	4H	＞10^11	Number of Holes Selection Type (With 2H to 8H Holes)	20 ～ 1200	20 ～ 1000	6 ～ 1191.5	6 ～ 991.5	-	-	3 ～ 8	-	1 ～ 8
-	1 Piece(s)	12 Day(s) or more	10	Transparent	Standard	4H	＞10^11	Number of Holes Selection Type (With 2H to 8H Holes)	20 ～ 1200	20 ～ 1000	6 ～ 1191.5	6 ～ 991.5	-	-	-	5 ～ 8	1 ～ 8
-	1 Piece(s)	12 Day(s) or more	10	Transparent	Standard	6H	＞10^11	Number of Holes Selection Type (With 2H to 8H Holes)	20 ～ 1200	20 ～ 1000	6 ～ 595.5	6 ～ 991.5	3 ～ 4	-	-	-	1 ～ 8
-	1 Piece(s)	12 Day(s) or more	10	Transparent	Standard	6H	＞10^11	Number of Holes Selection Type (With 2H to 8H Holes)	20 ～ 1200	20 ～ 1000	6 ～ 595.5	6 ～ 991.5	-	3 ～ 10	-	-	1 ～ 8
-	1 Piece(s)	12 Day(s) or more	10	Transparent	Standard	6H	＞10^11	Number of Holes Selection Type (With 2H to 8H Holes)	20 ～ 1200	20 ～ 1000	6 ～ 595.5	6 ～ 991.5	-	-	3 ～ 8	-	1 ～ 8
-	1 Piece(s)	12 Day(s) or more	10	Transparent	Standard	6H	＞10^11	Number of Holes Selection Type (With 2H to 8H Holes)	20 ～ 1200	20 ～ 1000	6 ～ 595.5	6 ～ 991.5	-	-	-	5 ～ 8	1 ～ 8
-	1 Piece(s)	12 Day(s) or more	10	Transparent	Standard	8H	＞10^11	Number of Holes Selection Type (With 2H to 8H Holes)	20 ～ 1200	20 ～ 1000	6 ～ 595.5	6 ～ 495.5	3 ～ 4	-	-	-	1 ～ 8
-	1 Piece(s)	12 Day(s) or more	10	Transparent	Standard	8H	＞10^11	Number of Holes Selection Type (With 2H to 8H Holes)	20 ～ 1200	20 ～ 1000	6 ～ 595.5	6 ～ 495.5	-	3 ～ 10	-	-	1 ～ 8
-	1 Piece(s)	12 Day(s) or more	10	Transparent	Standard	8H	＞10^11	Number of Holes Selection Type (With 2H to 8H Holes)	20 ～ 1200	20 ～ 1000	6 ～ 595.5	6 ～ 495.5	-	-	3 ～ 8	-	1 ～ 8
-	1 Piece(s)	12 Day(s) or more	10	Transparent	Standard	8H	＞10^11	Number of Holes Selection Type (With 2H to 8H Holes)	20 ～ 1200	20 ～ 1000	6 ～ 595.5	6 ～ 495.5	-	-	-	5 ～ 8	1 ～ 8
-	1 Piece(s)	4 Day(s) or more	10	Transparent	Standard	No Drilling Alteration	＞10^11	No Hole Machining (Standard Type)	20 ～ 1200	20 ～ 1000	-	-	-	-	-	-	1 ～ 8
-	1 Piece(s)	12 Day(s) or more	10	Smoke Brown	Standard	2H	＞10^11	Number of Holes Selection Type (With 2H to 8H Holes)	20 ～ 1200	20 ～ 1000	6 ～ 1191.5	4.5 ～ 995.5	3 ～ 4	-	-	-	3 ～ 5
-	1 Piece(s)	12 Day(s) or more	10	Smoke Brown	Standard	2H	＞10^11	Number of Holes Selection Type (With 2H to 8H Holes)	20 ～ 1200	20 ～ 1000	6 ～ 1191.5	4.5 ～ 995.5	-	3 ～ 10	-	-	3 ～ 5
-	1 Piece(s)	12 Day(s) or more	10	Smoke Brown	Standard	2H	＞10^11	Number of Holes Selection Type (With 2H to 8H Holes)	20 ～ 1200	20 ～ 1000	6 ～ 1191.5	4.5 ～ 995.5	-	-	3 ～ 6	-	3 ～ 5
-	1 Piece(s)	12 Day(s) or more	10	Smoke Brown	Standard	2H	＞10^11	Number of Holes Selection Type (With 2H to 8H Holes)	20 ～ 1200	20 ～ 1000	6 ～ 1191.5	4.5 ～ 995.5	-	-	-	5 ～ 8	3 ～ 5
-	1 Piece(s)	12 Day(s) or more	10	Smoke Brown	Standard	2HL	＞10^11	Number of Holes Selection Type (With 2H to 8H Holes)	20 ～ 1200	20 ～ 1000	4.5 ～ 1195.5	6 ～ 991.5	3 ～ 4	-	-	-	3 ～ 5
-	1 Piece(s)	12 Day(s) or more	10	Smoke Brown	Standard	2HL	＞10^11	Number of Holes Selection Type (With 2H to 8H Holes)	20 ～ 1200	20 ～ 1000	4.5 ～ 1195.5	6 ～ 991.5	-	3 ～ 10	-	-	3 ～ 5
-	1 Piece(s)	12 Day(s) or more	10	Smoke Brown	Standard	2HL	＞10^11	Number of Holes Selection Type (With 2H to 8H Holes)	20 ～ 1200	20 ～ 1000	4.5 ～ 1195.5	6 ～ 991.5	-	-	3 ～ 6	-	3 ～ 5
-	1 Piece(s)	12 Day(s) or more	10	Smoke Brown	Standard	2HL	＞10^11	Number of Holes Selection Type (With 2H to 8H Holes)	20 ～ 1200	20 ～ 1000	4.5 ～ 1195.5	6 ～ 991.5	-	-	-	5 ～ 8	3 ～ 5
-	1 Piece(s)	12 Day(s) or more	10	Smoke Brown	Standard	4H	＞10^11	Number of Holes Selection Type (With 2H to 8H Holes)	20 ～ 1200	20 ～ 1000	6 ～ 1191.5	6 ～ 991.5	3 ～ 4	-	-	-	3 ～ 5
-	1 Piece(s)	12 Day(s) or more	10	Smoke Brown	Standard	4H	＞10^11	Number of Holes Selection Type (With 2H to 8H Holes)	20 ～ 1200	20 ～ 1000	6 ～ 1191.5	6 ～ 991.5	-	3 ～ 10	-	-	3 ～ 5
-	1 Piece(s)	12 Day(s) or more	10	Smoke Brown	Standard	4H	＞10^11	Number of Holes Selection Type (With 2H to 8H Holes)	20 ～ 1200	20 ～ 1000	6 ～ 1191.5	6 ～ 991.5	-	-	3 ～ 6	-	3 ～ 5
-	1 Piece(s)	12 Day(s) or more	10	Smoke Brown	Standard	4H	＞10^11	Number of Holes Selection Type (With 2H to 8H Holes)	20 ～ 1200	20 ～ 1000	6 ～ 1191.5	6 ～ 991.5	-	-	-	5 ～ 8	3 ～ 5
-	1 Piece(s)	12 Day(s) or more	10	Smoke Brown	Standard	6H	＞10^11	Number of Holes Selection Type (With 2H to 8H Holes)	20 ～ 1200	20 ～ 1000	6 ～ 595.5	6 ～ 991.5	3 ～ 4	-	-	-	3 ～ 5
-	1 Piece(s)	12 Day(s) or more	10	Smoke Brown	Standard	6H	＞10^11	Number of Holes Selection Type (With 2H to 8H Holes)	20 ～ 1200	20 ～ 1000	6 ～ 595.5	6 ～ 991.5	-	3 ～ 10	-	-	3 ～ 5
-	1 Piece(s)	12 Day(s) or more	10	Smoke Brown	Standard	6H	＞10^11	Number of Holes Selection Type (With 2H to 8H Holes)	20 ～ 1200	20 ～ 1000	6 ～ 595.5	6 ～ 991.5	-	-	3 ～ 6	-	3 ～ 5
-	1 Piece(s)	12 Day(s) or more	10	Smoke Brown	Standard	6H	＞10^11	Number of Holes Selection Type (With 2H to 8H Holes)	20 ～ 1200	20 ～ 1000	6 ～ 595.5	6 ～ 991.5	-	-	-	5 ～ 8	3 ～ 5
-	1 Piece(s)	12 Day(s) or more	10	Smoke Brown	Standard	8H	＞10^11	Number of Holes Selection Type (With 2H to 8H Holes)	20 ～ 1200	20 ～ 1000	6 ～ 595.5	6 ～ 495.5	3 ～ 4	-	-	-	3 ～ 5
-	1 Piece(s)	12 Day(s) or more	10	Smoke Brown	Standard	8H	＞10^11	Number of Holes Selection Type (With 2H to 8H Holes)	20 ～ 1200	20 ～ 1000	6 ～ 595.5	6 ～ 495.5	-	3 ～ 10	-	-	3 ～ 5
-	1 Piece(s)	12 Day(s) or more	10	Smoke Brown	Standard	8H	＞10^11	Number of Holes Selection Type (With 2H to 8H Holes)	20 ～ 1200	20 ～ 1000	6 ～ 595.5	6 ～ 495.5	-	-	3 ～ 6	-	3 ～ 5
-	1 Piece(s)	12 Day(s) or more	10	Smoke Brown	Standard	8H	＞10^11	Number of Holes Selection Type (With 2H to 8H Holes)	20 ～ 1200	20 ～ 1000	6 ～ 595.5	6 ～ 495.5	-	-	-	5 ～ 8	3 ～ 5
-	1 Piece(s)	10 Day(s) or more	10	Smoke Brown	Standard	No Drilling Alteration	＞10^11	No Hole Machining (Standard Type)	20 ～ 1200	20 ～ 1000	-	-	-	-	-	-	3 ～ 5
-	1 Piece(s)	12 Day(s) or more	10	Smoke Brown	Antistatic	2H	＞10^17	Number of Holes Selection Type (With 2H to 8H Holes)	20 ～ 1200	20 ～ 1000	6 ～ 1191.5	4.5 ～ 995.5	3 ～ 4	-	-	-	3 ～ 5
-	1 Piece(s)	12 Day(s) or more	10	Smoke Brown	Antistatic	2H	＞10^17	Number of Holes Selection Type (With 2H to 8H Holes)	20 ～ 1200	20 ～ 1000	6 ～ 1191.5	4.5 ～ 995.5	-	3 ～ 10	-	-	3 ～ 5
-	1 Piece(s)	12 Day(s) or more	10	Smoke Brown	Antistatic	2H	＞10^17	Number of Holes Selection Type (With 2H to 8H Holes)	20 ～ 1200	20 ～ 1000	6 ～ 1191.5	4.5 ～ 995.5	-	-	3 ～ 6	-	3 ～ 5
-	1 Piece(s)	12 Day(s) or more	10	Smoke Brown	Antistatic	2H	＞10^17	Number of Holes Selection Type (With 2H to 8H Holes)	20 ～ 1200	20 ～ 1000	6 ～ 1191.5	4.5 ～ 995.5	-	-	-	5 ～ 8	3 ～ 5
-	1 Piece(s)	12 Day(s) or more	10	Smoke Brown	Antistatic	2HL	＞10^17	Number of Holes Selection Type (With 2H to 8H Holes)	20 ～ 1200	20 ～ 1000	4.5 ～ 1195.5	6 ～ 991.5	3 ～ 4	-	-	-	3 ～ 5
-	1 Piece(s)	12 Day(s) or more	10	Smoke Brown	Antistatic	2HL	＞10^17	Number of Holes Selection Type (With 2H to 8H Holes)	20 ～ 1200	20 ～ 1000	4.5 ～ 1195.5	6 ～ 991.5	-	3 ～ 10	-	-	3 ～ 5
-	1 Piece(s)	12 Day(s) or more	10	Smoke Brown	Antistatic	2HL	＞10^17	Number of Holes Selection Type (With 2H to 8H Holes)	20 ～ 1200	20 ～ 1000	4.5 ～ 1195.5	6 ～ 991.5	-	-	3 ～ 6	-	3 ～ 5
-	1 Piece(s)	12 Day(s) or more	10	Smoke Brown	Antistatic	2HL	＞10^17	Number of Holes Selection Type (With 2H to 8H Holes)	20 ～ 1200	20 ～ 1000	4.5 ～ 1195.5	6 ～ 991.5	-	-	-	5 ～ 8	3 ～ 5
-	1 Piece(s)	12 Day(s) or more	10	Smoke Brown	Antistatic	4H	＞10^17	Number of Holes Selection Type (With 2H to 8H Holes)	20 ～ 1200	20 ～ 1000	6 ～ 1191.5	6 ～ 991.5	3 ～ 4	-	-	-	3 ～ 5
-	1 Piece(s)	12 Day(s) or more	10	Smoke Brown	Antistatic	4H	＞10^17	Number of Holes Selection Type (With 2H to 8H Holes)	20 ～ 1200	20 ～ 1000	6 ～ 1191.5	6 ～ 991.5	-	3 ～ 10	-	-	3 ～ 5
-	1 Piece(s)	12 Day(s) or more	10	Smoke Brown	Antistatic	4H	＞10^17	Number of Holes Selection Type (With 2H to 8H Holes)	20 ～ 1200	20 ～ 1000	6 ～ 1191.5	6 ～ 991.5	-	-	3 ～ 6	-	3 ～ 5
-	1 Piece(s)	12 Day(s) or more	10	Smoke Brown	Antistatic	4H	＞10^17	Number of Holes Selection Type (With 2H to 8H Holes)	20 ～ 1200	20 ～ 1000	6 ～ 1191.5	6 ～ 991.5	-	-	-	5 ～ 8	3 ～ 5
-	1 Piece(s)	12 Day(s) or more	10	Smoke Brown	Antistatic	6H	＞10^17	Number of Holes Selection Type (With 2H to 8H Holes)	20 ～ 1200	20 ～ 1000	6 ～ 595.5	6 ～ 991.5	3 ～ 4	-	-	-	3 ～ 5
-	1 Piece(s)	12 Day(s) or more	10	Smoke Brown	Antistatic	6H	＞10^17	Number of Holes Selection Type (With 2H to 8H Holes)	20 ～ 1200	20 ～ 1000	6 ～ 595.5	6 ～ 991.5	-	3 ～ 10	-	-	3 ～ 5
-	1 Piece(s)	12 Day(s) or more	10	Smoke Brown	Antistatic	6H	＞10^17	Number of Holes Selection Type (With 2H to 8H Holes)	20 ～ 1200	20 ～ 1000	6 ～ 595.5	6 ～ 991.5	-	-	3 ～ 6	-	3 ～ 5
-	1 Piece(s)	12 Day(s) or more	10	Smoke Brown	Antistatic	6H	＞10^17	Number of Holes Selection Type (With 2H to 8H Holes)	20 ～ 1200	20 ～ 1000	6 ～ 595.5	6 ～ 991.5	-	-	-	5 ～ 8	3 ～ 5
-	1 Piece(s)	12 Day(s) or more	10	Smoke Brown	Antistatic	8H	＞10^17	Number of Holes Selection Type (With 2H to 8H Holes)	20 ～ 1200	20 ～ 1000	6 ～ 595.5	6 ～ 495.5	3 ～ 4	-	-	-	3 ～ 5
-	1 Piece(s)	12 Day(s) or more	10	Smoke Brown	Antistatic	8H	＞10^17	Number of Holes Selection Type (With 2H to 8H Holes)	20 ～ 1200	20 ～ 1000	6 ～ 595.5	6 ～ 495.5	-	3 ～ 10	-	-	3 ～ 5
-	1 Piece(s)	12 Day(s) or more	10	Smoke Brown	Antistatic	8H	＞10^17	Number of Holes Selection Type (With 2H to 8H Holes)	20 ～ 1200	20 ～ 1000	6 ～ 595.5	6 ～ 495.5	-	-	3 ～ 6	-	3 ～ 5
-	1 Piece(s)	12 Day(s) or more	10	Smoke Brown	Antistatic	8H	＞10^17	Number of Holes Selection Type (With 2H to 8H Holes)	20 ～ 1200	20 ～ 1000	6 ～ 595.5	6 ～ 495.5	-	-	-	5 ～ 8	3 ～ 5
-	1 Piece(s)	10 Day(s) or more	10	Smoke Brown	Antistatic	No Drilling Alteration	＞10^17	No Hole Machining (Standard Type)	20 ～ 1200	20 ～ 1000	-	-	-	-	-	-	3 ～ 5
-	1 Piece(s)	12 Day(s) or more	10	Orange	Standard	2H	＞10^11	Number of Holes Selection Type (With 2H to 8H Holes)	20 ～ 1200	20 ～ 1000	6 ～ 1191.5	4.5 ～ 995.5	3 ～ 4	-	-	-	3 ～ 5
-	1 Piece(s)	12 Day(s) or more	10	Orange	Standard	2H	＞10^11	Number of Holes Selection Type (With 2H to 8H Holes)	20 ～ 1200	20 ～ 1000	6 ～ 1191.5	4.5 ～ 995.5	-	3 ～ 10	-	-	3 ～ 5
-	1 Piece(s)	12 Day(s) or more	10	Orange	Standard	2H	＞10^11	Number of Holes Selection Type (With 2H to 8H Holes)	20 ～ 1200	20 ～ 1000	6 ～ 1191.5	4.5 ～ 995.5	-	-	3 ～ 6	-	3 ～ 5
-	1 Piece(s)	12 Day(s) or more	10	Orange	Standard	2H	＞10^11	Number of Holes Selection Type (With 2H to 8H Holes)	20 ～ 1200	20 ～ 1000	6 ～ 1191.5	4.5 ～ 995.5	-	-	-	5 ～ 8	3 ～ 5
-	1 Piece(s)	12 Day(s) or more	10	Orange	Standard	2HL	＞10^11	Number of Holes Selection Type (With 2H to 8H Holes)	20 ～ 1200	20 ～ 1000	4.5 ～ 1195.5	6 ～ 991.5	3 ～ 4	-	-	-	3 ～ 5
-	1 Piece(s)	12 Day(s) or more	10	Orange	Standard	2HL	＞10^11	Number of Holes Selection Type (With 2H to 8H Holes)	20 ～ 1200	20 ～ 1000	4.5 ～ 1195.5	6 ～ 991.5	-	3 ～ 10	-	-	3 ～ 5
-	1 Piece(s)	12 Day(s) or more	10	Orange	Standard	2HL	＞10^11	Number of Holes Selection Type (With 2H to 8H Holes)	20 ～ 1200	20 ～ 1000	4.5 ～ 1195.5	6 ～ 991.5	-	-	3 ～ 6	-	3 ～ 5
-	1 Piece(s)	12 Day(s) or more	10	Orange	Standard	2HL	＞10^11	Number of Holes Selection Type (With 2H to 8H Holes)	20 ～ 1200	20 ～ 1000	4.5 ～ 1195.5	6 ～ 991.5	-	-	-	5 ～ 8	3 ～ 5
-	1 Piece(s)	12 Day(s) or more	10	Orange	Standard	4H	＞10^11	Number of Holes Selection Type (With 2H to 8H Holes)	20 ～ 1200	20 ～ 1000	6 ～ 1191.5	6 ～ 991.5	3 ～ 4	-	-	-	3 ～ 5
-	1 Piece(s)	12 Day(s) or more	10	Orange	Standard	4H	＞10^11	Number of Holes Selection Type (With 2H to 8H Holes)	20 ～ 1200	20 ～ 1000	6 ～ 1191.5	6 ～ 991.5	-	3 ～ 10	-	-	3 ～ 5
-	1 Piece(s)	12 Day(s) or more	10	Orange	Standard	4H	＞10^11	Number of Holes Selection Type (With 2H to 8H Holes)	20 ～ 1200	20 ～ 1000	6 ～ 1191.5	6 ～ 991.5	-	-	3 ～ 6	-	3 ～ 5
-	1 Piece(s)	12 Day(s) or more	10	Orange	Standard	4H	＞10^11	Number of Holes Selection Type (With 2H to 8H Holes)	20 ～ 1200	20 ～ 1000	6 ～ 1191.5	6 ～ 991.5	-	-	-	5 ～ 8	3 ～ 5
-	1 Piece(s)	12 Day(s) or more	10	Orange	Standard	6H	＞10^11	Number of Holes Selection Type (With 2H to 8H Holes)	20 ～ 1200	20 ～ 1000	6 ～ 595.5	6 ～ 991.5	3 ～ 4	-	-	-	3 ～ 5
-	1 Piece(s)	12 Day(s) or more	10	Orange	Standard	6H	＞10^11	Number of Holes Selection Type (With 2H to 8H Holes)	20 ～ 1200	20 ～ 1000	6 ～ 595.5	6 ～ 991.5	-	3 ～ 10	-	-	3 ～ 5
-	1 Piece(s)	12 Day(s) or more	10	Orange	Standard	6H	＞10^11	Number of Holes Selection Type (With 2H to 8H Holes)	20 ～ 1200	20 ～ 1000	6 ～ 595.5	6 ～ 991.5	-	-	3 ～ 6	-	3 ～ 5
-	1 Piece(s)	12 Day(s) or more	10	Orange	Standard	6H	＞10^11	Number of Holes Selection Type (With 2H to 8H Holes)	20 ～ 1200	20 ～ 1000	6 ～ 595.5	6 ～ 991.5	-	-	-	5 ～ 8	3 ～ 5
-	1 Piece(s)	12 Day(s) or more	10	Orange	Standard	8H	＞10^11	Number of Holes Selection Type (With 2H to 8H Holes)	20 ～ 1200	20 ～ 1000	6 ～ 595.5	6 ～ 495.5	3 ～ 4	-	-	-	3 ～ 5
-	1 Piece(s)	12 Day(s) or more	10	Orange	Standard	8H	＞10^11	Number of Holes Selection Type (With 2H to 8H Holes)	20 ～ 1200	20 ～ 1000	6 ～ 595.5	6 ～ 495.5	-	3 ～ 10	-	-	3 ～ 5
-	1 Piece(s)	12 Day(s) or more	10	Orange	Standard	8H	＞10^11	Number of Holes Selection Type (With 2H to 8H Holes)	20 ～ 1200	20 ～ 1000	6 ～ 595.5	6 ～ 495.5	-	-	3 ～ 8	-	3 ～ 5
-	1 Piece(s)	12 Day(s) or more	10	Orange	Standard	8H	＞10^11	Number of Holes Selection Type (With 2H to 8H Holes)	20 ～ 1200	20 ～ 1000	6 ～ 595.5	6 ～ 495.5	-	-	-	5 ～ 8	3 ～ 5
-	1 Piece(s)	12 Day(s) or more	10	Orange	Standard	No Drilling Alteration	＞10^11	No Hole Machining (Standard Type)	20 ～ 1200	20 ～ 1000	-	-	-	-	-	-	3 ～ 5
-	1 Piece(s)	12 Day(s) or more	10	Transparent	Antistatic	2H	＞10^17	Number of Holes Selection Type (With 2H to 8H Holes)	20 ～ 1200	20 ～ 1000	6 ～ 1191.5	4.5 ～ 995.5	3 ～ 4	-	-	-	3 ～ 5

More Information

Product TOP

Basic Information

Material	PET	Continuous Operating Temperature (High Temperature)(℃)	55 to 70	Continuous Operating Temperature (Low Temperature)(℃)	-15
Oil	○	A/B Dimension Tolerance	±1.0

Configure

110 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Color
Transparent

Smoke Brown

Orange
Clear
Grade
- Standard
- Antistatic
Clear
Hole Machining
No Drilling Alteration

2H

2HL

4H

6H

8H
Clear
Volume Resistivity Value(Ω･cm)
- ＞10^11
- ＞10^17
Clear
Shape
- No Hole Machining (Standard Type)
- Number of Holes Selection Type (With 2H to 8H Holes)
Clear
A(mm)
[20-2000/1mm Unit(s)]
Clear
B(mm)
[20-1000/1mm Unit(s)]
Clear
F(mm)
[4.5-1195.5/0.5mm Unit(s)]
Clear
G(mm)
[4.5-995.5/0.5mm Unit(s)]
Clear
M(mm)
3

4
Clear
N(mm)
3

4

5

6

8

10
Clear
P(mm)
3

4

5

6

8
Clear
Q(mm)
5

6

8
Clear
T(mm)
1

2

3

4

5

8
Clear
type
- L-PYA
- L-PYBA
- L-PYBTA
- L-PYDA
- L-PYTA
- PYA
- PYA2H
- PYA2HL
- PYA4H
- PYA6H
- PYA8H
- PYBA
- PYBA2H
- PYBA2HL
- PYBA4H
- PYBA6H
- PYBA8H
- PYBTA
- PYBTA2H
- PYBTA2HL
- PYBTA4H
- PYBTA6H
- PYBTA8H
- PYDA
- PYDA2H
- PYDA2HL
- PYDA4H
- PYDA6H
- PYDA8H
- PYTA
- PYTA2H
- PYTA2HL
- PYTA4H
- PYTA6H
- PYTA8H
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

4 Day(s) or Less

7 Day(s) or Less

10 Day(s) or Less

12 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Additional Products in this Category

Complementary Products

Hex Socket Head Cap - Screws Configurable Length
MISUMI Days to Ship : 5 Day(s) or more
Sponge Washers - Temperature limit for seals is 80°C.
MISUMI Days to Ship : 4 Day(s) or more
Urethane / Rubber Baked Bumpers - Threaded Type
MISUMI Days to Ship : 1 Day(s) or more

Customers Who Viewed This Item Also Viewed

6 Series Aluminum Frame - Square 30x30mm, 4 Side Slots, A6N01SS-T5 Aluminum
MISUMI

Days to Ship : 2 Day(s) or more
Acrylic Plate -Cast Type -Custom Size
MISUMI

Days to Ship : 6 Day(s) or more
5 Series Aluminum Frame - Square 20x20mm, 4 Side Slots, A6N01SS-T5 Aluminum
MISUMI

Days to Ship : 2 Day(s) or more
Polycarbonate Plates -High Impact Resistance
MISUMI

Days to Ship : 10 Day(s) or more
Reversing Bracket with Protrusion - 6 Series, 8mm Groove, 1-Row (90 Degree)
MISUMI

Standard Price : MYR 3.64-

Days to Ship : 1 Day(s) or more
Frame End Caps - For 6 Series (Slot Width 8mm) Aluminum Frames
MISUMI

Standard Price : MYR 8.81-

Days to Ship : 1 Day(s) or more
MC Nylon® Plates-Standard / Sliding / High Strength / Conductivity / Weather Resistance Grade
MISUMI

Days to Ship : 6 Day(s) or more
Hexagon Socket Head Cap Bolt, Standard Connection
MISUMI

Standard Price : MYR 0.87-

Days to Ship : 1 Day(s) or more
For 6 Series (Slot Width 8mm) - Post-Assembly Insertion - Spring Nuts
MISUMI

Standard Price : MYR 2.06-

Days to Ship : 1 Day(s) or more
8 Series Aluminum Frame - Square 40x40mm, 4 Side Slots, A6N01SS-T5 Aluminum
MISUMI

Days to Ship : 4 Day(s) or more
Plastic Panel Bracket - 90° Rotational Installation
MISUMI

Standard Price : MYR 8.49-

Days to Ship : 1 Day(s) or more
Reversing Bracket with Protrusion - 8 Series, 10mm Groove, 1-Row Groove (90 Degree)
MISUMI

Standard Price : MYR 4.57-

Days to Ship : 1 Day(s) or more

back next

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations): Tel：(60) 3 7890 6399; 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday); Technical Inquiry

How can we improve?

PET Plates (Part Numbers)

(i)Caution

Drawing

■Number of Holes Combination Type (With Corner Holes Pre-Drilled)

■Number of Holes Combination Type (No Corner Drilling)

■ Hole Machined Type

■ Standard Type

Product Specifications

Part Number Display Method

Specification Table

Alterations

■Number of Holes Combination Type (With Corner Holes Pre-Drilled)

■Number of Holes Combination Type (No Corner Drilling)

■ Hole Machined Type

■ Standard Type

Technical Information

Specifications

Alterations

Part Number

More Information

Basic Information

Configure

Specification/Dimensions

Color

Grade

Hole Machining

Volume Resistivity Value(Ω･cm)

Shape

A(mm)

B(mm)

F(mm)

G(mm)

M(mm)

N(mm)

P(mm)

Q(mm)

T(mm)

type

CAD

Days to Ship

Specify Alterations

Additional Products in this Category

Complementary Products

Customers Who Viewed This Item Also Viewed

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm