[Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

8-50 Series Aluminum Frame - Square 50x50mm, 4 Side Slots, A6N01SS-T5 Aluminum

Aluminum Frame 8-50 Series/ Slot width 10/50x50mm.
Aluminium Profile is a device used to build machine structures, available in various sizes,cross section shapes and with different types of surfaces treatment to choose from.
[Feature]
● Shape : Square
● Slot width : 10 mm. /1 slot
● Cross-section : 50 mm. X 50 mm.
● Overall length :The size is configurable between 50 to 4000 mm, and the minimum length can be increased by increments 0.5 mm.
● Material : Aluminium grade A6N01SS-T5, A6061SS-T6 Equivalent, A6063S-T5 and A6063S-T6 Equivalent
● Surface treatment: Clear Anodize and Black Anodize
[Application]
Used for automatic machine structures in various industries such as automotive industry, electronics industry, etc.

(i)Caution

Additional freight and delivery charge are added to items longer than 2000.1mm

Part Number

Configured Part Number is shown.

Dimensional Drawing of Aluminum Frames

EFS (standard type)		HFS (standard type)		GFS (high rigidity type)

8-45 Series

*There is no tolerance for the L dimension of the fixed length Aluminum Frames.
For other dimensional tolerances,

Groove details (HFS/GFS)

Groove details (EFS)

Groove bottom details

(HFS
type)

(GFS
type)

(EFS
type)

Enlarged view of part A

■The 8-45 series has
a groove width of 10±0.36 mm and is suitable for M8 bolts.
[ ! ]No surface treatment is applied to cut surfaces or additionally machined areas.
[ ! ]If an end tap is specified, it will be machined in the area circled in red.

Specified Length Aluminum Frames Specifications Table (Additional Processing: Possible)

Model	−	L
HFS8-5050	−	800

type	Material	Surface Treatment	Model	L specified in 0.5mm increments (tolerance ±0.5mm)	Mass kg/m	Cross-sectional area mm ²	Moment of inertia mm ⁴
type	Material	Surface Treatment	Model	L specified in 0.5mm increments (tolerance ±0.5mm)	Mass kg/m	Cross-sectional area mm ²	ℓx	ℓy
HFS	A6005CSS-T5	White anodized aluminum	HFS8-5050	5 0 to 4 0 0 0	3.43	1150	26.64× ¹⁰⁴	26.64× ¹⁰⁴
HFS	A6005CSS-T5	Black anodized aluminum	HFSB8-5050	5 0 to 4 0 0 0	3.43	1150	26.64× ¹⁰⁴	26.64× ¹⁰⁴
EFS	A6005CSS-T5	White anodized aluminum	EFS8-5050	5 0 to 4 0 0 0	2.84	1053	26.98× ¹⁰⁴	26.98× ¹⁰⁴
EFS	A6005CSS-T5	Black anodized aluminum	E F S B 8 －5 0 5 0	5 0 to 4 0 0 0	2.84	1053	26.98× ¹⁰⁴	26.98× ¹⁰⁴
GFS	A6061SS-T6 equivalent	White anodized aluminum	GFS8-5050	5 0 to 4 0 0 0	4.4	1633	38.16× ¹⁰⁴	38.16× ¹⁰⁴

[ ! ]If you require a length of 4000 mm or more without anodizing

Fixed Length Aluminum Frames Specifications Table (Effective Length 4000mm)

[ ! ]Fixed-length Aluminum Frames have a format with K at the beginning of the format code for each Aluminum Frames.

Model	−	L
KHFS8-5050	−	4000

type	Material	Surface Treatment	Model	Lmm (no tolerance specified)*2	Cross-sectional area mm ²	Moment of inertia mm ⁴
type	Material	Surface Treatment	Model	Lmm (no tolerance specified)*2	Cross-sectional area mm ²	ℓx	ℓy
HFS	A6005CSS-T5	White anodized aluminum	K H F S 8 －5 0 5 0	4 0 0 0	1150	26.64× ¹⁰⁴	26.64× ¹⁰⁴
HFS	A6005CSS-T5	Black anodized aluminum	K H F S B 8 －5 0 5 0	4 0 0 0	1150	26.64× ¹⁰⁴	26.64× ¹⁰⁴
EFS	A6005CSS-T5	White anodized aluminum	K E F S 8 －5 0 5 0	4 0 0 0	1053	26.98× ¹⁰⁴	26.98× ¹⁰⁴
EFS	A6005CSS-T5	Black anodized aluminum	K E F S B 8 －5 0 5 0	4 0 0 0	1053	26.98× ¹⁰⁴	26.98× ¹⁰⁴
GFS	A6061SS-T6 equivalent	White anodized aluminum	K G F S 8 －5 0 5 0	4 0 0 0	1633	38.16× ¹⁰⁴	38.16× ¹⁰⁴

[ ! ] An effective length of 4000 mm means that the Aluminum Frames has an effectivelength of 4000 mm or more that can actually be used.
The actual size, including the gripping allowance, is 4000 mm or more (it will be several tens of mm longer).
The fixed-length Aluminum Frames is a Aluminum Frames that the customer cuts to their own use, so the exact lengthcannot be specified.
[ ! ]A heat resistance temperature of up to 70°C is recommended. Continuing temperatures above 100°C will cause bendingdue to the load.
However, temporary high temperatures such as steam can tolerate up to 100°C.

Alterations of Aluminum Frames (Specified Length Only, Fixed Length Not Possible)

[ ! ]By using the various alterations listed below, MISUMI's specified length Aluminum Frames can be assembled with greaterflexibility.
Some Aluminum Frames cannot be applied depending on the type and size. Please check the price list on eachalteration page to see if it is applicable.
Items marked with "-" in the price list cannot be applied.

classification	Additional Work name	Alteration code example	Content
> End face tapping	End face tap (center hole)	LTP/RTP/TPW LHP/RHP/HPW	The Aluminum Frames is tapped. 　 ■HFS/EFS type 　 LTP/RTP/TPW: M12 depth 18 mm (helisert inserted) 　LHP/RHP/HPW: M10 depth 18 mm (helisert inserted) 　 ■GFS type 　 LTP/RTP/TPW: M12 depth 36 mm 　LHP/RHP/HPW: M8 depth 15 mm (helisert inserted) Blind joints (screw joints simple joints) hat require this processing
> Change cutting method	High-precision cutting	SC	The tolerance of the overall length L has been changed from L±0.5 to L±0.2, allowing for high-precision cutting. *Only applicable to L≦1500
> Change cutting method	45 degree cut	L□T45 R□T45	The cut is made at a 45-degree angle. 45-degree cuts cannot be specified in the same direction with otheralterations. Example: HFS6-3030-500- L TP- LAT45 ⇒ ✖ (alterations in the same direction (left)) HFS6-3030-500-LTP- R AT45 ⇒ 〇 (separate alterations on left and right) [ ! ]If you would like to cut at an angle other than 45 degrees
> Wrench Drilling	Fixed position wrench hole	LCH/LCV/LCP RCH/RCV/RCP	This additional processing is required to drill a wrench hole (φ8) in accordance with the position of the tap onthe end face of the mating Aluminum Frames when fastening a blind joint that assembles Aluminum Frames into an Lshape. Blind joints that require this processing ( screw joints / single joints / tapping joints)
	Hole position shifted by the thickness of the Aluminum Frames cap	FL FR	The hole position for the additional fixed position wrench hole is moved by the thickness of the Aluminum Framescap (3 mm). This prevents the Aluminum Frames cap from protruding when assembled at a corner.
	Wrench holes at specified positions	AH/BH/CH/DH/EH AV/BV/CV/DV/EV AP/BP/CP/DP/EP	This is an additional process to drill a wrench hole (φ8) at any position. It can be used when fastening blindjoints at locations other than the Aluminum Frames end. ・ Up to five holes can be drilled in each of thehorizontal, vertical, and cross directions. [!] If you require six or morewrench holes.
> Counterbore Drilling	Specified position counterbored hole	Z8-XA○○ Z12-YA○○	This is an additional process to drill a counterbore hole (select from Z6, Z8, or Z12) at any position. 　Z6: Through hole φ6.5, counterbore φ11, Z8: Through hole φ9, counterbore φ14, Z12: Through hole φ13,counterbore φ19 . Up to five holes can be drilled in one direction. For Aluminum Frames with multiplerows of grooves on one surface, counterbore holes will be machined in all grooves. [ ! ]If you require more than six counterbore holes or to change the direction of the counterbore holes.
> Drilling holes specifically for blind joints	D hole	LDH/LDV RDH/RDV	Drill the holes required for fastening a single joint. ( Single joint)
	S hole	LSH/LSV RSH/RSV	Drills holes required for fastening first-in-place double joints ( first-in-place double joints).
	M hole	LMH/LMV RMH/RMV	Drills holes required for connecting post-assembly double joints and center joints. ( Post-assembly double joints / center joints)
> Other processing	GFS series end face tap	LTS/RTS/TSW	We perform the tapping required to attach end plates specifically for high-rigidity Aluminum Frames. ( High-rigidity plates )
	C-chamfered end	CW	The outer periphery of the Aluminum Frames end face is chamfered.
	Sticking stickers	ZZZ	A sticker printed with the catalog number etc. is attached to the Aluminum Frames. There are restrictions on the number of characters etc., but it is also possible to print the customer'sserial number and unit number.

8-45 Series Related Parts of Aluminum Frames

■Aluminum Frames accessories

Product name	bracket	Blind Joint	nut	Aluminum Frames cap	Groove cover	Conductive washer
photograph
Product page	Here	Here	Here	Here	Here	Here

■List of compatible Aluminum Frames caps

Aluminum Frames model number	Compatible Aluminum Frames caps
Aluminum Frames model number	Product Type		color	Thickness	Model number	Number of uses
HFS8-5050 HFSB8-5050 EFS8-5050 EFSB8-5050 fixed length Aluminum Frames (model numbers starting with K) are also the same.		Cap stopper	black	3	HFC8-5050-B	1
		Cap stopper	Light gray	3	HFC8-5050-S	1
		bolted	black	3	HFCB8-5050-B	1
			Light gray	3	HFCB8-5050-S	1
			yellow	3	HFCB8-5050-Y	1
The same applies to the GFS8-5050 fixed length Aluminum Frames (model number starting with K).		Cap stopper	black	3	GFC8-5050-B	1
		Cap stopper	Light gray	3	GFC8-5050-S	1
		Bolt mounting (high rigidity plate type) requires special additional processing.	silver color	2	HFCD8-5050	1

Selection Support Information of Aluminum Frames

■Aluminum Frames connection methods
Aluminum Frames connection methods can be broadly divided into the following two types. >> various connectionexamples .

	bracket	Blind Joint
Connection example
Features	- Connects outside the Aluminum Frames - Can be moved to any position - Not aesthetically pleasing	・Connects inside the Aluminum Frames ・Aesthetically pleasing ・Requires processing of the AluminumFrames

■Additional tapping of end faces (8-45 series □50)
Center section (no corner section)

type	Size and Position	left	Right side	both sides	cross section
NEFS EFS HFS	M12 depth 18 (φ12.5 is helical insert)	LTP	RTP	TPW
NEFS EFS HFS	M10 depth 18 (helisert inserted)	LHP	RHP	HPW
GFS GNFS	M12 depth 36	LTP	RTP	TPW
GFS GNFS	M8 depth 15 (helisert inserted)	LHP	RHP	HPW
Tap position

■How to think about the allowable guideline load (deflection) for Aluminum Frames
[!] The allowable guideline load is the load that causes the Aluminum Frames todeflect within 1 mm per 1000 mm of length.
Deflection exceeding this will not cause damage, but it should be considered the maximum practical deflection. (Theallowable guideline deflection is proportional to the length. For example, 500 mm = 0.5 mm, 2000 mm = 2 mm.)
the simplified deflection calculation table/deflection calculation formula for your reference.
Aluminum Frames

■Related products

Product name	General-purpose area sensor	Ultra-thin area sensor
photograph
Product page	Here	Here
General information page	Details page	Details page

Specifications

Part Number	-	L
HFS8-5050	-	800
KHFS8-5050	-	4000

■Configurable Length Extrusion

Type	[ M ]Material	[ S ]Surface Treatment	Part Number	L 0.5mm Increment	Mass kg/m	Sectional Area mm²	Cross Sectional Moment of Inertia mm⁴
Type	[ M ]Material	[ S ]Surface Treatment	Part Number	L 0.5mm Increment	Mass kg/m	Sectional Area mm²	ℓx	ℓy
HFS	A6N01SS-T5	Clear Anodize	HFS8-5050	50~4000	3.43	1150	26.64x10⁴	26.64x10⁴
HFS	A6N01SS-T5	Black Anodize	HFSB8-5050	50~4000	3.43	1150	26.64x10⁴	26.64x10⁴
EFS	A6N01SS-T5	Clear Anodize	EFS8-5050	50~4000	2.84	1053	26.98x10⁴	26.98x10⁴
EFS	A6N01SS-T5	Black Anodize	EFSB8-5050	50~4000	2.84	1053	26.98x10⁴	26.98x10⁴
GNFS	A6063S-T6 Equivalent	Clear Anodize	GNFS8-5050	50~4000	4.4	1633	38.16x10⁴	38.16x10⁴
GFS	A6061SS-T6 Equivalent	Clear Anodize	GFS8-5050	50~4000	4.4	1633	38.16x10⁴	38.16x10⁴
NEFS	A6063S-T5	Clear Anodize	NEFS8-5050	50~4000	2.84	1053	26.98x10⁴	26.98x10⁴
NEFS	A6063S-T5	Black Anodize	NEFSB8-5050	50~4000	2.84	1053	26.98x10⁴	26.98x10⁴

[ ! ]For some product types, up to 6,000mm length is available.
[ ! ]Some extrusions are not applicable. For details, refer to "Information about Non-FA Catalog Standard Product Services" (P.131) and contact the relevant person in charge at MISUMI.
■Fixed Length Extrusion (Effective Length 4000mm)
[ ! ]Part numbers beginning with the character "K" indicate Fixed Length Extrusion.

Type	[ M ]Material	[ S ]Surface Treatment	Part Number	L mm	Sectional Area mm²	Cross Sectional Moment of Inertia mm⁴
Type	[ M ]Material	[ S ]Surface Treatment	Part Number	L mm	Sectional Area mm²	ℓx	ℓy
HFS	A6N01SS-T5	Clear Anodize	KHFS8-5050	4000	1150	26.64x10⁴	26.64x10⁴
HFS	A6N01SS-T5	Black Anodize	KHFSB8-5050	4000	1150	26.64x10⁴	26.64x10⁴
EFS	A6N01SS-T5	Clear Anodize	KEFS8-5050	4000	1053	26.98x10⁴	26.98x10⁴
EFS	A6N01SS-T5	Black Anodize	KEFSB8-5050	4000	1053	26.98x10⁴	26.98x10⁴
GNFS	A6063S-T6 Equivalent	Clear Anodize	KGNFS8-5050	4000	1633	38.16x10⁴	38.16x10⁴
GFS	A6061SS-T6 Equivalent	Clear Anodize	KGFS8-5050	4000	1633	38.16x10⁴	38.16x10⁴
NEFS	A6063S-T5	Clear Anodize	KNEFS8-5050	4000	1053	26.98x10⁴	26.98x10⁴
NEFS	A6063S-T5	Black Anodize	KNEFSB8-5050	4000	1053	26.98x10⁴	26.98x10⁴

[ ! ]Effective length of 4000mm indicates extrusions with an effective length of 4000mm or more. The actual length including marginal grip is more than 4000mm (several dozen mm). Fixed Length Extrusions must be cut by users thus the exact length cannot be specified.

Alterations

Aluminum Extrusion 8-50 Series/slot width 10/50x50mm:Related Image
By using MISUMI's Long Aluminum Frame specification from the following additions, the high structure reassembling is freely possible.
Depending on classifications and sizes, there are some inapplicable frames.
For more information, please read the inapplicable listed on each page description table.
Inside the page description table, the items with "-" mark indicates the inapplicable.

Please see the alteration details >> Click here

Category	Alteration Names	Codes	Explanations	Catalog Page
Aluminum Frame Alteration Summary/Chamfer/Part# Labeling Service				P2-755&756
End Tapping	End Tapping on Center Hole	LTP/RTP/TPW LHP/RHP/HPW	Add tappings on frame ends.	P2-757
End Tapping	End Tapping 4 Corner Holes	LSP/RSP/SPW	Add tappings on frame ends.	P2-768
Specify How to Cut	Precision Cut	SC	Change total length tolerance. (Ｌ±0.5→Ｌ±0.2) [ ! ]Available only for Ｌ≦1500	P2-758
Specify How to Cut	45 deg Cut	L_T45/R_T45	Cut at 45 deg angle.	P2-758
Wrench Access Holes	Wrench Access Hole at Fixed Position	LWP/RWP	Add wrench access holes at fixed position for blind joints.	P2-759&760
Wrench Access Holes	Wrench Access Hole at Specified Position	AH/BH/AV/BV	Add wrench access holes at specified position for blind joints.	P2-761&762
Counterbores	Counterbores at Specified Position	Z6/XA100	Add counterbores at specified position. Use the holes for connecting the frames and a table top.	P2-763
Holes for Specific Blind Joint Type	D Hole	LDH/RDH	Add holes needed for Single Joint connection.	P2-764
	S Hole	LSH/RSH	Add holes needed for pre-assembly double joint connection.	P2-765
	M Hole	LMH/RMH	Add holes needed for post-assembly double joint connection.	P2-766
	L Hole	JLP/KLP	Add holes needed for parallel joint connection.	P2-767
Other Alterations	GNFS/GFS Series End Tapping	LTS/RTS/TSW	Add end tappings on high rigidity frames.	P2-768
Other Alterations	HFSR Series End Tapping	LTS/RTS/TSW	Add end tappings needed for adding a protection cover on the end fo HFSR series frame.	P2-768

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 45; 60

Part Number
EFS8-5050-[50-4000/0.5]
EFSB8-5050-[50-4000/0.5]
GFS8-5050-[50-4000/0.5]
HFS8-5050-[50-4000/0.5]
HFSB8-5050-[50-4000/0.5]

Standard Unit Price	Minimum order quantity	Days to Ship	RoHS	Extrusion Type_	Surface Treatment	Material	Overall Length L (mm)
-	1 Piece(s)	10 Day(s) or more	10	EFS (Standard Type)	Clear Anodize Processing	A6005CSS-T5	50 ～ 4000
-	1 Piece(s)	10 Day(s) or more	10	EFS (Standard Type)	Black Anodize Treatment	A6005CSS-T5	50 ～ 4000
-	1 Piece(s)	10 Day(s) or more	10	GFS (High Rigidity)	Clear Anodize Processing	A6061SS-T6 Equivalent	50 ～ 4000
-	1 Piece(s)	7 Day(s)	10	HFS (Standard)	Clear Anodize Processing	A6005CSS-T5	50 ～ 4000
-	1 Piece(s)	10 Day(s) or more	10	HFS (Standard)	Black Anodize Treatment	A6005CSS-T5	50 ～ 4000

Product TOP

Basic Information

Standard Extrusion Size(mm)	50	Number of Slotted Surfaces	Four-Side Slots	Extrusion Size	50x50
Extrusion Series	MISUMI 8-45 Series (10 mm Groove Width)	Extrusion Type	Square Shape	Number of Extrusion Slots	1 Slot x 1 Slot
Surface Milled	Not Provided	Extrusion Size: Width (A)(mm)	50	Extrusion Size: Thickness (T)(mm)	50
L Dimension Fixed, Specified	Configurable

Configure

5 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Extrusion Type_
- HFS (Standard)
- GFS (High Rigidity)
- EFS (Standard Type)
Clear
Surface Treatment
Clear Anodize Processing

Black Anodize Treatment
Clear
Material
- A6005CSS-T5
- A6061SS-T6 Equivalent
Clear
Overall Length L(mm)
[50-4000/0.5mm Unit(s)]
Clear
type
- EFS8-5050
- EFSB8-5050
- GFS8-5050
- HFS8-5050
- HFSB8-5050
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

7 Day(s) or Less

10 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Additional Products in this Category

Complementary Products

Frame Cap For 8-45 Series (Slot Width 10 mm) Aluminum Frame
MISUMI Standard Price : MYR 9.91- Days to Ship : 1 Day(s) or more
Reversing Bracket with Protrusion - 8-45 Series, 10mm Groove, 1-Row Groove (90 Degree)
MISUMI Standard Price : MYR 4.84- Days to Ship : 2 Day(s) or more
Free Angle Brackets - For 8-45 Series (Slot Width 10mm) Aluminum Frames
MISUMI Standard Price : MYR 24.14- Days to Ship : 4 Day(s) or more

Customers Who Viewed This Item Also Viewed

8 Series Aluminum Frame - Square 40x40mm, 4 Side Slots, A6N01SS-T5 Aluminum
MISUMI

Days to Ship : 4 Day(s) or more
Reversing Bracket with Protrusion - 8-45 Series, 10mm Groove, 1-Row Groove (90 Degree)
MISUMI

Standard Price : MYR 4.84-

Days to Ship : 2 Day(s) or more
Reversing Bracket with Protrusion - 8 Series, 10mm Groove, 1-Row Groove (90 Degree)
MISUMI

Standard Price : MYR 4.57-

Days to Ship : 1 Day(s) or more
6 Series Aluminum Frame - Square 30x30mm, 4 Side Slots, A6N01SS-T5 Aluminum
MISUMI

Days to Ship : 2 Day(s) or more
Pre-Assembly Insertion Nuts for Aluminum Frames - Standard - For 8 Series (Slot Width 10mm)
MISUMI

Standard Price : MYR 1.95-

Days to Ship : 1 Day(s) or more
Frame Cap For 8-45 Series (Slot Width 10 mm) Aluminum Frame
MISUMI

Standard Price : MYR 9.91-

Days to Ship : 1 Day(s) or more
For 8 Series (Slot Width 10mm) - Post-Assembly Insertion - Stopper Nuts
MISUMI

Standard Price : MYR 2.04-

Days to Ship : 1 Day(s) or more
Post-Assembly Insertion Spring Nuts for Aluminum Frames with Temporary Holding Function For 8 Series (Slot Width 10mm)
MISUMI

Standard Price : MYR 1.55-

Days to Ship : 1 Day(s) or more
8-50 Series Aluminum Frame - 50x100mm, 10mm Slot Width
MISUMI

Days to Ship : 10 Day(s) or more
5 Series Aluminum Frame - Square 20x20mm, 4 Side Slots, A6N01SS-T5 Aluminum
MISUMI

Days to Ship : 2 Day(s) or more
8-45 Series Aluminum Frame - Square 45x45mm, 4 Side Slots, A6N01SS-T5 Aluminum
MISUMI

Days to Ship : 10 Day(s) or more
6 Series Aluminum Frame - Square 50x50mm, 4 Side Slots, A6N01SS-T5 Aluminum
MISUMI

Days to Ship : 10 Day(s) or more

back next

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations): Tel：(60) 3 7890 6399; 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday); Technical Inquiry

How can we improve?

8-50 Series Aluminum Frame - Square 50x50mm, 4 Side Slots, A6N01SS-T5 Aluminum

(i)Caution

Dimensional Drawing of Aluminum Frames

Specified Length Aluminum Frames Specifications Table (Additional Processing: Possible)

Fixed Length Aluminum Frames Specifications Table (Effective Length 4000mm)

Alterations of Aluminum Frames (Specified Length Only, Fixed Length Not Possible)

8-45 Series Related Parts of Aluminum Frames

Selection Support Information of Aluminum Frames

Specifications

Alterations

Part Number

Basic Information

Configure

Specification/Dimensions

Extrusion Type_

Surface Treatment

Material

Overall Length L(mm)

type

CAD

Days to Ship

Specify Alterations

Additional Products in this Category

Complementary Products

Customers Who Viewed This Item Also Viewed

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm