[Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

8 Series R-Shape Aluminum Frame - 80x80x40mm

Aluminum Frame 8 Series/slot width 10/80x80x40mm.
Aluminium Profile is a device used to build machine structures for build a corner of machine structures, available in various sizes,cross section shapes and with different types of surfaces treatment to choose from.
[Feature]
● Shape : Square fillet corner
● Slot width : 10 mm. / 1 slot only 2 side and the others are blind
● Cross-section : Overall 80 mm. x 80 mm., Aluminium Profile size 40x40 mm.
● Overall length :The size is configurable between 50 to 4000 mm, and the minimum length can be increased by increments 0.5 mm.
● Material : Aluminium grade A6N01SS-T5 and A6063S-T5
● Surface treatment: Clear Anodize
[Application]
Used for automatic machine structures in various industries such as automotive industry, electronics industry, etc.

(i)Caution

Additional freight and delivery charge are added to items longer than 2000.1mm

Part Number

Configured Part Number is shown.

HFSR8-808040-[50-4000/0.5]

Dimensional Drawing of Aluminum Frames

HFS (standard type)

8 Series Aluminum Frames

Groove details (HFS)

Groove bottom details

(HFS type)

Enlarged view of part A

■Aluminum Frames, The 8 Series is an aluminum extrusion with a groove width of 10±0.36 mm. Suitable for M8 bolts.
[ ! ]Aluminum Frames, The cut surfaces and additionally machined areas are not surface treated.
[ ! ]If you request additional tapped holes, the processing will be performed on the red circled areas in the aluminumextrusion outline drawing.
[ ! ]Aluminum Frames, Frame caps are not available for this product. We do not offer services outside of the catalog specifications.

Specified Length Aluminum Frames Specifications Table (Additional Processing: Possible)

Model Aluminum Frames	−	L
HFSR8−808040	−	800

type	Material	Surface Treatment	Model	L specified in 0.5mm increments (tolerance ±0.5mm)	Mass kg/m	Cross-sectional area mm ²	Moment of inertia mm ⁴
							ℓx	ℓy
HFS	A6005CSS-T5	White anodized aluminum	HFSR 8-808040	5 0 to 4 0 0 0	3.61	1339	80.99× ¹⁰⁴	80.99× ¹⁰⁴

[ ! ]Aluminum Frames, If you require non-anodized or black anodized aluminum, or a length of 4000 mm or more,

Alterations of Aluminum Frames (Specified Length Only, Fixed Length Not Possible)

[ ! ]Aluminum Frames, By using the various alterations listed below, MISUMI's specified length aluminum frames can be assembled with greaterflexibility.
Some frames cannot be applied depending on the type and size. Please check the price list on each alteration page tosee if it is applicable.
Aluminum Frames, Items marked with "-" in the price list cannot be applied.

classification	Additional Work name	Alteration code example	Content
End face tapping	End face tap (center hole)	LTP/RTP/TPW LHP/RHP/HPW	The frame is tapped. 　LTP/RTP/TPW: M12 depth 36mm 　LHP/RHP/HPW: M8 depth 15mm (with helical insert inserted) Aluminum Frames, This processing is required for blind joints ( screw joints / simple joints ).
Change cutting method	High-precision cutting	SC	Aluminum Frames, The tolerance of the overall length L has been changed from L±0.5 to L±0.2, allowing for high-precision cutting. *Only applicable to L≦1500
Drilling holes specifically for blind joints	L hole	JLP○○-H△ KLP○○-H△	Drill holes required for connecting parallel joints. ( Parallel joints )
Other processing	C-chamfered end	CW	Aluminum Frames, The outer periphery of the frame end face is chamfered.
Other processing	Sticking stickers	ZZZ	A sticker printed with the catalog number etc. is attached to the aluminum frame. Aluminum Frames, There are restrictions on the number of characters etc., but it is also possible to print the customer's serialnumber and unit number.

8 Series Related Parts of Aluminum Frames

■ Aluminum Frames accessories

Product name	bracket	Blind Joint	nut	Frame cap	Groove cover
photograph Aluminum Frames
Product page	Here	Here	Here	Here	Here

Specifications

Part Number	-	L
HFSR8-808040	-	800

■Configurable Length Extrusion

Type	[ M ]Material	[ S ]Surface Treatment	Part Number	L 0.5mm Increment	Mass kg/m	Sectional Area mm²	Cross Sectional Moment of Inertia mm⁴
Type	[ M ]Material	[ S ]Surface Treatment	Part Number	L 0.5mm Increment	Mass kg/m	Sectional Area mm²	ℓx	ℓy
NFS	A6063-T5	Clear Anodize	NFSR8-808040	50~4000	3.61	1339	80.99x10⁴	80.99x10⁴
HFS	A6N01SS-T5	Clear Anodize	HFSR8-808040	50~4000	3.61	1339	80.99x10⁴	80.99x10⁴

[ ! ]For some product types, up to 6,000mm length is available.
[ ! ]Some extrusions are not applicable. For details, refer to "Information about Non-FA Catalog Standard Product Services" (P.131) and contact the relevant person in charge at MISUMI.

Alterations

Aluminum Extrusion 8 Series/slot width 10/80x80x40mm:Related Image

By using MISUMI's Long Aluminum Frame specification from the following additions, the high structure reassembling is freely possible.
Depending on classifications and sizes, there are some inapplicable frames.
For more information, please read the inapplicable listed on each page description table.
Inside the page description table, the items with "-" mark indicates the inapplicable.

Please see the alteration details >> Click here

Category	Alteration Names	Codes	Explanations	Catalog Page
Aluminum Frame Alteration Summary/Chamfer/Part# Labeling Service				P2-755&756
End Tapping	End Tapping on Center Hole	LTP/RTP/TPW LHP/RHP/HPW	Add tappings on frame ends.	P2-757
End Tapping	End Tapping 4 Corner Holes	LSP/RSP/SPW	Add tappings on frame ends.	P2-768
Specify How to Cut	Precision Cut	SC	Change total length tolerance. (Ｌ±0.5→Ｌ±0.2) [ ! ]Available only for Ｌ≦1500	P2-758
Specify How to Cut	45 deg Cut	L_T45/R_T45	Cut at 45 deg angle.	P2-758
Wrench Access Holes	Wrench Access Hole at Fixed Position	LWP/RWP	Add wrench access holes at fixed position for blind joints.	P2-759&760
Wrench Access Holes	Wrench Access Hole at Specified Position	AH/BH/AV/BV	Add wrench access holes at specified position for blind joints.	P2-761&762
Counterbores	Counterbores at Specified Position	Z6/XA100	Add counterbores at specified position. Use the holes for connecting the frames and a table top.	P2-763
Holes for Specific Blind Joint Type	D Hole	LDH/RDH	Add holes needed for Single Joint connection.	P2-764
	S Hole	LSH/RSH	Add holes needed for pre-assembly double joint connection.	P2-765
	M Hole	LMH/RMH	Add holes needed for post-assembly double joint connection.	P2-766
	L Hole	JLP/KLP	Add holes needed for parallel joint connection.	P2-767
Other Alterations	GNFS/GFS Series End Tapping	LTS/RTS/TSW	Add end tappings on high rigidity frames.	P2-768
Other Alterations	HFSR Series End Tapping	LTS/RTS/TSW	Add end tappings needed for adding a protection cover on the end fo HFSR series frame.	P2-768

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 45; 60

Part Number
HFSR8-808040-[50-4000/0.5]

Part Number	Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	RoHS	Overall Length L (mm)
	-	1 Piece(s)		10 Day(s) or more	10	50 ～ 4000

Product TOP

Basic Information

Standard Extrusion Size(mm)	40	Extrusion Type_	HFS (Standard)	Surface Treatment	Clear Anodize Processing
Extrusion Series	8 Series	Extrusion Type	L/R Shape	Surface Milled	Not Provided
Material	A6005CSS-T5	Extrusion Size: Width (A)(mm)	80	Extrusion Size: Thickness (T)(mm)	80
L Dimension Fixed, Specified	Configurable	Extrusion Size: L-Shaped Width(mm)	40	Alterations	40

Configure

1 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Overall Length L(mm)
[50-4000/0.5mm Unit(s)]
Clear
type
- HFSR8-808040
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

10 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Additional Products in this Category

Complementary Products

Reversing Bracket with Protrusion - 8 Series, 10mm Groove, 1-Row Groove (90 Degree)
MISUMI Standard Price : MYR 4.57- Days to Ship : 1 Day(s) or more
Aluminum Frame (6 and 8) Series/Mixed Base/(Y Style)
MISUMI Days to Ship : 10 Day(s) or more

Customers Who Viewed This Item Also Viewed

8 Series R-Shape Aluminum Frame - 40x40mm Cross-Section
MISUMI

Days to Ship : 10 Day(s) or more
8 Series L-Shape Aluminum Frame - 80x80x40mm
MISUMI

Days to Ship : 10 Day(s) or more
Aluminum Frame 8-90 Series/slot width 10/Shape R, 90x90x45mm
MISUMI

Days to Ship : 10 Day(s) or more
Aluminum Frame 6 series R shape 60 × 60 × 30 mm
MISUMI

Days to Ship : 10 Day(s) or more
8-45 Series Aluminum Frame - R Shape 45x45mm, Slot Width 10mm, A6N01SS-T5 Aluminum
MISUMI

Days to Ship : 10 Day(s) or more
Aluminum Frame 5 series R shape 40 × 40 × 20 mm
MISUMI

Days to Ship : 10 Day(s) or more
Aluminum Frame 8 Series/slot width 10/80x80x40mm, Parallel Surfacing
MISUMI

Days to Ship : 12 Day(s) or more
Aluminum Frame 8 Series/slot width 10/45 Degree
MISUMI

Days to Ship : 10 Day(s) or more
Aluminum Frame 8 Series/slot width 10/30, 45, 60-Degree
MISUMI

Days to Ship : 10 Day(s) or more

back next

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations): Tel：(60) 3 7890 6399; 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday); Technical Inquiry

How can we improve?

8 Series R-Shape Aluminum Frame - 80x80x40mm

(i)Caution

Dimensional Drawing of Aluminum Frames

Specified Length Aluminum Frames Specifications Table (Additional Processing: Possible)

Alterations of Aluminum Frames (Specified Length Only, Fixed Length Not Possible)

8 Series Related Parts of Aluminum Frames

Specifications

Alterations

Part Number

Basic Information

Configure

Specification/Dimensions

Overall Length L(mm)

type

CAD

Days to Ship

Specify Alterations

Additional Products in this Category

Complementary Products

Customers Who Viewed This Item Also Viewed

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm