[Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Aluminum Frame 8 Series Rectangular 40 × 80 mm 3 Side Slots - A6N01SS-T5 Aluminum

Volume Discount

Aluminum Frame Series 8, Square shape 40 x 80mm, 3- Side Slots with Slot width 10mm
Surface treatment is not applied to cut surfaces and additional machining parts.

(i)Caution

Additional freight and delivery charge are added to items longer than 2000.1mm
Please check the content on our website as the PDF does not contain the most up-to-date information.

Part Number

Configured Part Number is shown.

Dimensional Drawing of Aluminum Frames

HFS (standard type)

Aluminum Frames

EFS (standard type)

Aluminum Frames

		8 Series Aluminum Frames

Groove details (common to NFS, HFS, CAF, GNFS, and GFS types)

Groove details (EFS type)

Groove bottom details

(HFS/CAF type)

(GFS type)

(GNFS type)

(EFS type)

Enlarged view of part A

■Aluminum Frames, The 8 Series is an aluminum extrusion with a groove width of 10±0.36 mm. Suitable for M8 bolts.
[ ! ]Aluminum Frames, The cut surfaces and additionally machined areas are not surface treated.
[ ! ]If you request additional tapped holes, the processing will be performed in the red circled areas on the aluminumextrusion outline drawing.

Specified Length Aluminum Frames Specifications Table (Additional Processing: Possible)

Model Aluminum Frames	−	L
HFSF8 −4080	−	800

type	Material	Surface Treatment	Model	L specified in 0.5mm increments	Mass kg/m	Cross-sectional area mm ²	Moment of inertia mm ⁴
type	Material	Surface Treatment	Model	L specified in 0.5mm increments	Mass kg/m	Cross-sectional area mm ²	ℓx	ℓy
HFS	A6005CSS-T5	White anodized aluminum	H F S F 8 －4 0 8 0	5 0 to 4 0 0 0	2.98	1104	20.3× ¹⁰⁴	70.5× ¹⁰⁴
EFS	A6005CSS-T5	White anodized aluminum	E F S F 8 －4 0 8 0	5 0 to 4 0 0 0	2.81	1041	20.37× ¹⁰⁴	72.20× ¹⁰⁴

[ ! ]Aluminum Frames, If you require non-anodized aluminum, black anodized aluminum, or a length between 4000mm and 6000mm,

Fixed Length Aluminum Frames Specifications Table (Effective Length 4000mm)

[ ! ]Aluminum Frames, Fixed-length frames have a format with K at the beginning of the format code for each frame.

Model Aluminum Frames	−	L
KHFSF8−4080	−	4000

type	Material	Surface Treatment	Model	Lmm	Cross-sectional area mm ²	Moment of inertia mm ⁴
type	Material	Surface Treatment	Model	Lmm	Cross-sectional area mm ²	ℓx	ℓy
HFS	A6005CSS-T5	White anodized aluminum	K H F S F 8 －4 0 8 0	4 0 0 0	1104	20.3× ¹⁰⁴	70.5× ¹⁰⁴
EFS	A6005CSS-T5	White anodized aluminum	K E F S F 8 －4 0 8 0	4 0 0 0	1041	20.37× ¹⁰⁴	72.20× ¹⁰⁴

[ ! ]Aluminum Frames, An effective length of 4000 mm means that the actual usable length of the frame is 4000 mm or more.
The actual length including the gripping allowance will be 4000 mm or more (it will be several tens of mm longer).
Aluminum Frames, As fixed-length frames are frames that are cut by the customer, the exact length cannot be specified.

Alterations of Aluminum Frames (Specified Length Only, Fixed Length Not Possible)

[ ! ]Aluminum Frames, By using the various alterations listed below, MISUMI's specified length aluminum frames can be assembled with greaterflexibility.
Some frames cannot be applied depending on the type and size. Please check the price list on each alteration page tosee if it is applicable.
Aluminum Frames, Items marked with "-" in the price list cannot be applied.

classification	Additional Work name	Alteration code example	Content
End face tapping	End face tap (center hole)	LTP/RTP/TPW LHP/RHP/HPW	The frame is tapped. 　LTP/RTP/TPW: M12 depth 36mm 　LHP/RHP/HPW: M8 depth 15mm (with helical insert inserted) Aluminum Frames, This processing is required for blind joints ( screw joints / simple joints ).
Change cutting method	High-precision cutting	SC	Aluminum Frames, The tolerance of the overall length L has been changed from L±0.5 to L±0.2, allowing for high-precision cutting. *Only applicable to L≦1500
Change cutting method	45 degree cut	L□T45 R□T45	Aluminum Frames, The cut is made at a 45-degree angle. 45-degree cuts cannot be specified in the same direction with other alterations. Example: HFS6-3030-500- L TP- LAT45 ⇒ ✖ (alterations in the same direction (left)) HFS6-3030-500- L TP- RAT45 ⇒ 〇 (separate alterations on left and right) [ ! ]Aluminum Frames, If you would like to cut at an angle other than 45 degrees, please contact our catalog non-standard product service .
Wrench Drilling	Fixed position wrench hole	LCH/LCV/LCP RCH/RCV/RCP	Aluminum Frames, This additional processing is required to drill a wrench hole (φ8) in accordance with the position of the tap onthe end face of the mating frame when fastening a blind joint that assembles frames into an L shape. Blind joints that require this processing ( screw joints / single joints / tapping joints )
	Hole position shifted by the thickness of the frame cap	FL FR	Aluminum Frames, The hole position for the additional fixed position wrench hole is moved by the thickness of the frame cap (3mm). This prevents the frame cap from protruding when assembled at a corner.
	Wrench holes at specified positions	AH/BH/CH/DH/EH AV/BV/CV/DV/EV AP/BP/CP/DP/EP	Aluminum Frames, This is an additional process to drill a wrench hole (φ8) at any position. It can be used when fastening blindjoints at locations other than the frame end. ・ Up to five holes can be drilled in each of the horizontal, vertical, and cross directions. [!] If you require six or more wrench holes, please contact our catalog non-standard product service .
Counterbore Drilling	Specified position counterbored hole	Z8-XA○○	Aluminum Frames, This is an additional process to drill a counterbore hole (select from Z6, Z8, or Z12) at any position. 　Z6: Through hole φ6.5, counterbore φ11, Z8: Through hole φ9, counterbore φ14, Z12: Through hole φ13,counterbore φ19 . Up to five holes can be drilled in one direction. For frames with multiple rows of grooves on one surface, counterbore holes will be machined in all grooves. [ ! ]If you require more than six counterbore holes or to change the direction of the counterbore holes, please contact our non-standard product service .
Drilling holes specifically for blind joints	D hole	LDH/LDV RDH/RDV	Drill the holes required for fastening a single joint. ( Single joint )
	S hole	LSV RSV	Drills holes required for fastening first-in-place double joints ( first-in-place double joints ) .
	M hole	LMH/LMV RMH/RMV	Drills holes required for connecting post-assembly double joints and center joints. ( Post-assembly double joints / center joints )
	L hole	JLP○○-H△ KLP○○-H△	Drill holes required for connecting parallel joints. ( Parallel joints )
Other processing	C-chamfered end	CW	Aluminum Frames, The outer periphery of the frame end face is chamfered.
Other processing	Sticking stickers	ZZZ	A sticker printed with the catalog number etc. is attached to the aluminum frame. Aluminum Frames, There are restrictions on the number of characters etc., but it is also possible to print the customer's serialnumber and unit number.

8 Series Related Parts of Aluminum Frames

■Aluminum Frames accessories

Product name	bracket	Blind Joint	nut	Frame cap	Groove cover
photograph
Product page	Here	Here	Here	Here	Here

■Aluminum Frames, List of compatible frame caps

Frame model number	Compatible frame caps
Frame model number	Product Type		color	Thickness	Model number	Number of uses
HFSF8-4080 and EFSF8-4080 Aluminum Frames, fixed length frames (model numbers starting with K) are also the same.		Cap stopper	black	3	HFC8-4080-B	1
		Cap stopper	Light gray	3	HFC8-4080-S	1
		Cap stopper (long leg type)	black	3	HFCL8-4080-B	1
		Cap stopper (long leg type)	Light gray	3	HFCL8-4080-S	1
		Cap stopper (long leg type)	black	3	HFCB8-4080-B	1
		Cap stopper (long leg type)	Light gray	3	HFCB8-4080-S	1
		bolted	black	3	HFCB8-4040-B	2
			Light gray	3	HFCB8-4040-S	2
			yellow	3	HFCB8-4040-Y	2

Selection Support Information of Aluminum Frames

■Frame connection methods of Aluminum Frames
Frame connection methods can be broadly divided into the following two types.

	bracket	Blind Joint
Connection example
Features	- Connects outside the frame - Can be moved to any position - Not aesthetically pleasing	・Connects inside the frame ・Aesthetically pleasing ・Requires processing of the frame

■How to think about the allowable guideline load (deflection) for Aluminum Frames
[!]The allowable guideline load is the load that causes the frame to deflect within 1 mm per 1000 mm of length.
Deflection exceeding this will not cause damage, but it should be considered the maximum practical deflection. (Theallowable guideline deflection is proportional to the length. For example, 500 mm = 0.5 mm, 2000 mm = 2 mm.) Pleaserefer to
the Aluminum Frames strength guideline table or the simplified deflection calculation table/deflection calculation formula for your reference.

Type Overview of Aluminum Frames

		Standard Aluminum Frames			Lightweight Aluminum Frames		High-rigidity Aluminum Frames
		HFS Type	EFS type	NFS (NEFS) type	HFSL type	NFSL type	GFS type	GNFS type

Cross-sectional photo
Material		A6005CSS-T5	A6005CSS-T5	A6063S-T5	A6005CSS-T5	A6063S-T5	A6061SS-T6 equivalent	A6063S-T6 equivalent
Features		Standard cross-sectional shape.	Aluminum Frames, This frame maintains the same rigidity as the HFS series while achieving lighter weight and lower cost.	A significant price reduction has been achieved by changing the material. Strength (*) is the same as the HFSand EFS series.	Aluminum Frames, This frame is designed to be lightweight and inexpensive. It is suitable for situations where lightweight andinexpensiveness are prioritized over strength.	By changing the material from HFSL, we have achieved a further price reduction. Strength (*) is the same as theHFSL series.	Aluminum Frames, A thick frame that is designed for high rigidity, suitable for enclosures that are subject to high loads.	A significant price reduction has been achieved by changing the material of the load-bearing and rigid frame.Strength (*) is the same as the GFS series.
Surface Treatment		White anodized , black anodized , clear coated , baked finish (yellow)	White anodized aluminum Black anodized aluminum	White anodized aluminum Black anodized aluminum	White anodized aluminum Black anodized aluminum	White anodized aluminum	White anodized aluminum	White anodized aluminum
Compatible Series	5	○	-	○	-	-	-	-
	6		○		○	○	○	○
	8
	8-45

Specifications

Part Number	-	L
HFSF8-4080	-	800
KHFSF8-4080	-	4000

■Configurable Length Extrusion

Type	[ M ]Material	[ S ]Surface Treatment	Part Number	L 0.5mm Increment	Mass kg/m	Sectional Area mm²	Cross Sectional Moment of Inertia mm⁴
Type	[ M ]Material	[ S ]Surface Treatment	Part Number	L 0.5mm Increment	Mass kg/m	Sectional Area mm²	ℓx	ℓy
HFS	A6N01SS-T5	Clear Anodize	HFSF8-4080	50~4000	2.98	1104	20.3x10⁴	70.5x10⁴
EFS	A6N01SS-T5	Clear Anodize	EFSF8-4080	50~4000	2.81	1041	20.37x10⁴	72.20x10⁴
NEFS	A6063S-T5	Clear Anodize	NEFSF8-4080	50~4000	2.81	1041	20.37x10⁴	72.20x10⁴

[ ! ]For some product types, up to 6,000mm length is available.
[ ! ]Some extrusions are not applicable. For details, refer to "Information about Non-FA Catalog Standard Product Services" (P.131) and contact the relevant person in charge at MISUMI.
■Fixed Length Extrusion (Effective Length 4000mm)
[ ! ]Part numbers beginning with the character "K" indicate Fixed Length Extrusion.

Type	[ M ]Material	[ S ]Surface Treatment	Part Number	Lmm	Sectional Area mm²	Cross Sectional Moment of Inertia mm⁴
Type	[ M ]Material	[ S ]Surface Treatment	Part Number	Lmm	Sectional Area mm²	ℓx	ℓy
HFS	A6N01SS-T5	Clear Anodize	KHFSF8-4080	4000	1104	20.3x10⁴	70.5x10⁴
EFS	A6N01SS-T5	Clear Anodize	KEFSF8-4080	4000	1041	20.37x10⁴	72.20x10⁴
NEFS	A6063S-T5	Clear Anodize	KNEFSF8-4080	4000	1041	20.37x10⁴	72.20x10⁴

[ ! ]Effective length of 4000mm indicates extrusions with an effective length of 4000mm or more. The actual length including marginal grip is more than 4000mm (several dozen mm). Fixed Length Extrusions must be cut by users thus the exact length cannot be specified.

Alterations

Aluminum Extrusion 8 Series/slot width 10/40x80mm:Related Image

By using MISUMI's Long Aluminum Frame specification from the following additions, the high structure reassembling is freely possible.
Depending on classifications and sizes, there are some inapplicable frames.
For more information, please read the inapplicable listed on each page description table.
Inside the page description table, the items with "-" mark indicates the inapplicable.

Please see the alteration details >> Click here

Category	Alteration Names	Codes	Explanations	Catalog Page
Aluminum Frame Alteration Summary/Chamfer/Part# Labeling Service				P2-755&756
End Tapping	End Tapping on Center Hole	LTP/RTP/TPW LHP/RHP/HPW	Add tappings on frame ends.	P2-757
End Tapping	End Tapping 4 Corner Holes	LSP/RSP/SPW	Add tappings on frame ends.	P2-768
Specify How to Cut	Precision Cut	SC	Change total length tolerance. (Ｌ±0.5→Ｌ±0.2) [ ! ]Available only for Ｌ≦1500	P2-758
Specify How to Cut	45 deg Cut	L_T45/R_T45	Cut at 45 deg angle.	P2-758
Wrench Access Holes	Wrench Access Hole at Fixed Position	LWP/RWP	Add wrench access holes at fixed position for blind joints.	P2-759&760
Wrench Access Holes	Wrench Access Hole at Specified Position	AH/BH/AV/BV	Add wrench access holes at specified position for blind joints.	P2-761&762
Counterbores	Counterbores at Specified Position	Z6/XA100	Add counterbores at specified position. Use the holes for connecting the frames and a table top.	P2-763
Holes for Specific Blind Joint Type	D Hole	LDH/RDH	Add holes needed for Single Joint connection.	P2-764
	S Hole	LSH/RSH	Add holes needed for pre-assembly double joint connection.	P2-765
	M Hole	LMH/RMH	Add holes needed for post-assembly double joint connection.	P2-766
	L Hole	JLP/KLP	Add holes needed for parallel joint connection.	P2-767
Other Alterations	GNFS/GFS Series End Tapping	LTS/RTS/TSW	Add end tappings on high rigidity frames.	P2-768
Other Alterations	HFSR Series End Tapping	LTS/RTS/TSW	Add end tappings needed for adding a protection cover on the end fo HFSR series frame.	P2-768

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 45; 60

Part Number
EFSF8-4080-[50-4000/0.5]
HFSF8-4080-[50-4000/0.5]
KEFSF8-4080-4000
KHFSF8-4080-4000

Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	RoHS	Extrusion Type_	L Dimension Fixed, Specified	Overall Length L (Effective Length) (mm)	Overall Length L (mm)
-	1 Piece(s)		10 Day(s) or more	10	EFS (Standard Type)	Configurable	-	50 ～ 4000
-	1 Piece(s)		10 Day(s) or more	10	HFS (Standard)	Configurable	-	50 ～ 4000
MYR 1,101.33	1 Piece(s)	Available	10 Day(s) or more	10	EFS (Standard Type)	Fixed	4000	-
MYR 1,188.81	1 Piece(s)	Available	10 Day(s) or more	10	HFS (Standard)	Fixed	4000	-

Product TOP

Basic Information

Standard Extrusion Size(mm)	40	Number of Slotted Surfaces	Three-Side Slots	Surface Treatment	Clear Anodize Processing
Extrusion Size	40x80	Extrusion Series	8 Series	Extrusion Type	Rectangle Shape
Number of Extrusion Slots	1 Slot x 2 Slots	Surface Milled	Not Provided	Material	A6005CSS-T5
Extrusion Size: Width (A)(mm)	40	Extrusion Size: Thickness (T)(mm)	80

Configure

4 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Extrusion Type_
- HFS (Standard)
- EFS (Standard Type)
Clear
L Dimension Fixed, Specified
- Configurable
- Fixed
Clear
Overall Length L (Effective Length)(mm)
- 4000
Clear
Overall Length L(mm)
[50-4000/0.5mm Unit(s)]
Clear
type
- EFSF8-4080
- HFSF8-4080
- KEFSF8-4080
- KHFSF8-4080
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

10 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Additional Products in this Category

Complementary Products

Reversing Bracket with Protrusion - 8 Series, 10mm Groove, 1-Row Groove (90 Degree)
MISUMI Standard Price : MYR 4.57- Days to Ship : 1 Day(s) or more
Aluminum Frame (6 and 8) Series/Mixed Base/(Y Style)
MISUMI Days to Ship : 10 Day(s) or more
8 Series Blind Bracket - 10mm Slot Width
MISUMI Standard Price : MYR 23.62- Days to Ship : 1 Day(s) or more

Customers Who Viewed This Item Also Viewed

8 Series Aluminum Frame - Square 40x40mm, 3 Side Slots, A6N01SS-T5 Aluminum
MISUMI

Days to Ship : 10 Day(s) or more
Aluminum Frame 8 Series Rectangular 40 × 80 mm 2 Side Slots
MISUMI

Days to Ship : 10 Day(s) or more
8 Series Aluminum Frame - Square 40x40mm, 2 Side Slots, A6N01SS-T5 Aluminum
MISUMI

Days to Ship : 10 Day(s) or more
Aluminum Frame 8 Series Rectangular 40 × 80 mm 2 Side Slots (Opposing)
MISUMI

Days to Ship : 10 Day(s) or more
Aluminum Frame 6 Series Rectangular 30 × 60 mm 3 Side Slot - A6N01SS-T5 Aluminum
MISUMI

Days to Ship : 10 Day(s) or more
Aluminum Frame 8 Series/slot width 10/40x80mm, Parallel Surfacing
MISUMI

Days to Ship : 12 Day(s) or more
Aluminum Frame 8 Series Square 80 × 80 mm 1 Side Slot
MISUMI

Days to Ship : 10 Day(s) or more
8 Series L-Shape Aluminum Frame - 80x80x40mm
MISUMI

Days to Ship : 10 Day(s) or more
Aluminum Frame 6 Series Rectangular 30 × 60 mm 2 Side Slots - A6N01SS-T5 Aluminum
MISUMI

Days to Ship : 10 Day(s) or more
Aluminum Frame 8-45 series Rectangular 45 × 90 mm 3 Side Slots
MISUMI

Days to Ship : 10 Day(s) or more
Aluminum Frame 8 Series Square 40 × 40 mm 1 Side Slot
MISUMI

Days to Ship : 10 Day(s) or more
Aluminum Frame 5 Series/slot width 6/ 40x80mm, Parallel Surfacing
MISUMI

Days to Ship : 12 Day(s) or more

back next

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations): Tel：(60) 3 7890 6399; 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday); Technical Inquiry

How can we improve?

Aluminum Frame 8 Series Rectangular 40 × 80 mm 3 Side Slots - A6N01SS-T5 Aluminum

(i)Caution

Dimensional Drawing of Aluminum Frames

Specified Length Aluminum Frames Specifications Table (Additional Processing: Possible)

Fixed Length Aluminum Frames Specifications Table (Effective Length 4000mm)

Alterations of Aluminum Frames (Specified Length Only, Fixed Length Not Possible)

8 Series Related Parts of Aluminum Frames

Selection Support Information of Aluminum Frames

Type Overview of Aluminum Frames

Specifications

Alterations

Part Number

Basic Information

Configure

Specification/Dimensions

Extrusion Type_

L Dimension Fixed, Specified

Overall Length L (Effective Length)(mm)

Overall Length L(mm)

type

CAD

Days to Ship

Specify Alterations

Additional Products in this Category

Complementary Products

Customers Who Viewed This Item Also Viewed

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm