[Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

5 Series R-Shape Aluminum Frame - 20x20mm Cross-Section (Part Numbers)

Volume Discount

Aluminum Frame Series 5, R shape 20 x 20mm
Surface treatment is not applied to cut surfaces and additional machining parts.
Surface treatment is not applied to cut surfaces and additional machining parts.

(i)Caution

Additional freight and delivery charge are added to items longer than 2000.1mm

Part Number

Configured Part Number is shown.

Dimensional Drawing of Aluminum Frames

HFS (standard type)
Aluminum Frames

5 Series

Groove details
(common to all series)

Groove bottom details
(HFS, CAF, HFSY types)

Enlarged view of part A

■Aluminum Frames, The 5 Series is an aluminum extrusion with a groove width of 6±0.30 mm. Suitable for M5 bolts.
[ ! ]The cut surfaces and additionally machined areas are not surface treated.
[ ! ]If you request additional tapped holes, the processing will be performed in the red circled areas on the aluminumextrusion outline drawing.

Specified Length Aluminum Frames Specifications Table (Additional Processing: Possible)

Model Aluminum Frames	−	L
HFSR5-2020	−	800

type	Material	Surface Treatment	Model	L specified in 0.5mm increments	Mass kg/m	Cross-sectional area mm ²	Moment of inertia mm ⁴
							ℓlx	ℓly
HFS	A6005CSS-T5	White anodized aluminum	HFSR5-2020	50 to 4,000	0.42	153	0.57× ¹⁰⁴	0.57× ¹⁰⁴

[ ! ]If you require non-anodized or black anodized aluminum with a length of 6000 mm,

Fixed Length Aluminum Frames Specifications Table (Effective Length 4000mm)

[ ! ]Aluminum Frames, Fixed-length frames have a format with K at the beginning of the format code for each frame.

Model	−	L
KHFSR5−2020	−	4000

type	Material	Surface Treatment	Model	Lmm	Cross-sectional area mm ²	Moment of inertia mm ⁴
						ℓx	ℓy
HFS	A6005CSS-T5	White anodized aluminum	KHF SR5-2020	4000	153	0.57× ¹⁰⁴	0.57× ¹⁰⁴

[ ! ]Aluminum Frames, An effective length of 4000 mm means that the actual usable length of the frame is 4000 mm or more.
The actual length including the gripping allowance will be 4000 mm or more (it will be several tens of mmlonger).
As fixed-length frames are frames that are cut by the customer, the exact length cannot be specified.

Alterations of Aluminum Frames (Specified Length Only, Fixed Length Not Possible)

[ ! ]Aluminum Frames, By using the various alterations listed below, MISUMI's specified length aluminum frames can be assembled withgreater flexibility.
Some frames cannot be applied depending on the type and size. Please check the price list on each alteration page tosee if it is applicable.
Items marked with "-" in the price list cannot be applied.

classification	Additional Work name	Alteration code example	Content
End face tapping	End face tap (center hole)	LTP/RTP/TPW	Tap the frame. 　LTP/RTP/TPW: M4 depth 12mm. This tapping is required for blind joints ( screw joints / simple joints ).
Change cutting method	High-precision cutting	SC	The tolerance of the overall length L has been changed from L±0.5 to L±0.2, allowing for high-precision cutting. *Only applicable to L≦1500
Change cutting method	45 degree cut	L□T45 R□T45	The cut is made at a 45-degree angle. 45-degree cuts cannot be specified in the same direction with other alterations. Example: HFS6-3030-500- L TP- LAT45 ⇒ ✖ (alterations in the same direction (left)) HFS6-3030-500- L TP- RAT45 ⇒ 〇 (separate alterations on left and right) [ ! ]If you would like to cut at an angle other than 45 degrees, please contact our catalog non-standard product service .
Drilling holes specifically for blind joints	L hole	KLP○○-H△	Drill holes required for connecting parallel joints. ( Parallel joints )
Other processing	HFSR End Face Tap	LTS/RTS/TSW	This is a necessary process when using the HFSR series end face protection plate .
	C-chamfered end	CW	The outer periphery of the frame end face is chamfered.
	Sticking stickers	ZZZ	A sticker printed with the catalog number etc. is attached to the aluminum frame. There are restrictions on the number of characters etc., but it is also possible to print the customer's serialnumber and unit number.

5 Series Related Parts of Aluminum Frames

■Aluminum Frames accessories

Product name	bracket	Blind Joint	nut	Frame cap	Groove cover
photograph
Product page	Here	Here	Here	Here	Here

Specifications

Part Number	-	L
HFSR5-2020	-	800
KHFSR5-2020	-	4000

■Configurable Length Extrusion

Type	[ M ]Material	[ S ]Surface Treatment	Part Number	L 0.5mm Increment	Mass kg/m	Sectional Area mm²	Cross Sectional Moment of Inertia mm⁴
Type	[ M ]Material	[ S ]Surface Treatment	Part Number	L 0.5mm Increment	Mass kg/m	Sectional Area mm²	ℓlx	ℓly
HFS	A6N01SS-T5	Clear Anodize	HFSR5-2020	50~4000	0.42	153	0.57x10⁴	0.57x10⁴
NFS	A6063S-T5	Clear Anodize	NFSR5-2020	50~4000	0.42	153	0.57x10⁴	0.57x10⁴

[ ! ]For some product types, up to 6,000mm length is available.
[ ! ]Some extrusions are not applicable. For details, refer to "Information about Non-FA Catalog Standard Product Services" (P.103) and contact the relevant person in charge at MISUMI.
■Fixed Length Extrusion (Effective Length 4000mm)
[ ! ]Part numbers beginning with the character "K" indicate Fixed Length Extrusion.

Type	[ M ]Material	[ S ]Surface Treatment	Part Number	Lmm	Sectional Area mm²	Cross Sectional Moment of Inertia mm⁴
Type	[ M ]Material	[ S ]Surface Treatment	Part Number	Lmm	Sectional Area mm²	ℓx	ℓy
HFS	A6N01SS-T5	Clear Anodize	KHFSR5-2020	4000	153	0.57x10⁴	0.57x10⁴
NFS	A6063S-T5	Clear Anodize	KNFSR5-2020	4000	153	0.57x10⁴	0.57x10⁴

[ ! ]Effective length of 4000mm indicates extrusions with an effective length of 4000mm or more. The actual length including marginal grip is more than 4000mm (several dozen mm). Fixed Length Extrusions must be cut by users thus the exact length cannot be specified.

Alterations

Aluminum Extrusion 5 Series/slot width 6/20x20mm:Related Image

By using MISUMI's Long Aluminum Frame specification from the following additions, the high structure reassembling is freely possible.
Depending on classifications and sizes, there are some inapplicable frames.
For more information, please read the inapplicable listed on each page description table.
Inside the page description table, the items with "-" mark indicates the inapplicable.

Please see the alteration details >> Click here

Category	Alteration Names	Codes	Explanations	Catalog Page
Aluminum Frame Alteration Summary/Chamfer/Part# Labeling Service				P2-755&756
End Tapping	End Tapping on Center Hole	LTP/RTP/TPW LHP/RHP/HPW	Add tappings on frame ends.	P2-757
End Tapping	End Tapping 4 Corner Holes	LSP/RSP/SPW	Add tappings on frame ends.	P2-768
Specify How to Cut	Precision Cut	SC	Change total length tolerance. (Ｌ±0.5→Ｌ±0.2) [ ! ]Available only for Ｌ≦1500	P2-758
Specify How to Cut	45 deg Cut	L_T45/R_T45	Cut at 45 deg angle.	P2-758
Wrench Access Holes	Wrench Access Hole at Fixed Position	LWP/RWP	Add wrench access holes at fixed position for blind joints.	P2-759&760
Wrench Access Holes	Wrench Access Hole at Specified Position	AH/BH/AV/BV	Add wrench access holes at specified position for blind joints.	P2-761&762
Counterbores	Counterbores at Specified Position	Z6/XA100	Add counterbores at specified position. Use the holes for connecting the frames and a table top.	P2-763
Holes for Specific Blind Joint Type	D Hole	LDH/RDH	Add holes needed for Single Joint connection.	P2-764
	S Hole	LSH/RSH	Add holes needed for pre-assembly double joint connection.	P2-765
	M Hole	LMH/RMH	Add holes needed for post-assembly double joint connection.	P2-766
	L Hole	JLP/KLP	Add holes needed for parallel joint connection.	P2-767
Other Alterations	GNFS/GFS Series End Tapping	LTS/RTS/TSW	Add end tappings on high rigidity frames.	P2-768
Other Alterations	HFSR Series End Tapping	LTS/RTS/TSW	Add end tappings needed for adding a protection cover on the end fo HFSR series frame.	P2-768

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 60; 90

Part Number
HFSR5-2020-[50-4000/0.5]
KHFSR5-2020-4000

Part Number	Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	RoHS	L Dimension Fixed, Specified	Overall Length L (Effective Length) (mm)	Overall Length L (mm)
	-	1 Piece(s)		10 Day(s) or more	10	Configurable	-	50 ～ 4000
	MYR 618.28	1 Piece(s)	Available	10 Day(s) or more	10	Stationary	4000	-

Product TOP

Basic Information

Standard Extrusion Size(mm)	20	Extrusion Type_	HFS (Standard)	Surface Treatment	Clear Anodize Processing
Extrusion Series	5 Series	Extrusion Type	R Shape	Surface Milled	Not Provided
Material	A6N01SS-T5	Extrusion Size: Width (A)(mm)	20	Extrusion Size: Thickness (T)(mm)	20

Configure

2 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

L Dimension Fixed, Specified
- Configurable
- Stationary
Clear
Overall Length L (Effective Length)(mm)
- 4000
Clear
Overall Length L(mm)
[50-4000/0.5mm Unit(s)]
Clear
type
- HFSR5-2020
- KHFSR5-2020
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

10 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Additional Products in this Category

Complementary Products

Frame End Caps For 5 Series (Slot Width 6mm) Aluminum Frames
MISUMI Standard Price : MYR 7.70- Days to Ship : 1 Day(s) or more

Customers Who Viewed This Item Also Viewed

5 Series Aluminum Frame Corner Bracket/Corner Blind Bracket - 6mm Slot, 20 Square
MISUMI

Standard Price : MYR 18.19-

Days to Ship : 2 Day(s) or more
5 Series Aluminum Frame - Square 20x20mm, 3 Side Slots, A6N01SS-T5 Aluminum
MISUMI

Days to Ship : 10 Day(s) or more
5 Series Aluminum Frame - Square 20x20mm, 2 Side Slots, A6N01SS-T5 Aluminum
MISUMI

Days to Ship : 10 Day(s) or more
5 Series Aluminum Frame Blind Bracket - 6mm Slot
MISUMI

Standard Price : MYR 18.91-

Days to Ship : 1 Day(s) or more
6 Series R-Shape Aluminum Frame - 30x30mm Cross-Section
MISUMI

Days to Ship : 10 Day(s) or more
Aluminum Frame 3 Series/Base 15/Configurable Length
MISUMI

Days to Ship : 10 Day(s) or more
Aluminum Frame 5 series R shape 40 × 40 × 20 mm
MISUMI

Days to Ship : 10 Day(s) or more
8 Series R-Shape Aluminum Frame - 40x40mm Cross-Section
MISUMI

Days to Ship : 10 Day(s) or more
Aluminum Frame 5 Series/slot width 6/Curved Aluminum Frames
MISUMI

Days to Ship : 14 Day(s) or more
Aluminum Frame 5 Series Square 20 × 20 mm 1 Side Slot
MISUMI

Days to Ship : 10 Day(s) or more
Thick Bracket (Perpendicular Machining) - 5 Series, 6mm Slot, 1 Slot (90 Degree)
MISUMI

Standard Price : MYR 6.28-

Days to Ship : 2 Day(s) or more
Aluminum Frame 5 Series/slot width 6/20x20mm, Parallel Surfacing
MISUMI

Days to Ship : 12 Day(s) or more

back next

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations): Tel：(60) 3 7890 6399; 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday); Technical Inquiry

How can we improve?

5 Series R-Shape Aluminum Frame - 20x20mm Cross-Section (Part Numbers)

(i)Caution

Dimensional Drawing of Aluminum Frames

Specified Length Aluminum Frames Specifications Table (Additional Processing: Possible)

Fixed Length Aluminum Frames Specifications Table (Effective Length 4000mm)

Alterations of Aluminum Frames (Specified Length Only, Fixed Length Not Possible)

5 Series Related Parts of Aluminum Frames

Specifications

Alterations

Part Number

Basic Information

Configure

Specification/Dimensions

L Dimension Fixed, Specified

Overall Length L (Effective Length)(mm)

Overall Length L(mm)

type

CAD

Days to Ship

Specify Alterations

Additional Products in this Category

Complementary Products

Customers Who Viewed This Item Also Viewed

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm