(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Thermal Insulation Washers / Collars - (Heat Insulation Material) (DJC8-3-10)
- Volume Discount
[Features]·This washer collar provides high heat insulation as well as insulation
Part Number
Configured Part Number is shown.
DJC8-3-10
| Type | [ M ]Material | |
| Washers | DJW | Thermal Insulation Material |
| Collar | DJC | |
Specification Table
| Part Number | — | V | — | T |
| DJW10 | — | 3 | — | 5 |
| Part Number | — | V | — | L |
| DJC8 | — | 3 | — | 10 |
| Part Number | V Selection | T Selection | |||||||
| Type | D | ||||||||
| DJW | 10 | 3 | 4 | 5 | 3 5 | ||||
| 12 | 4 | 5 | 6 | 3 5 | |||||
| 16 | 5 | 6 | 8 | 3 5 | |||||
| 20 | 5 | 6 | 8 | 3 5 | |||||
| 25 | 5 | 6 | 8 | 10 | 3 5 | ||||
| 30 | 10 | 12 | 3 5 | ||||||
Part Number | Mass (g) (Reference Values) | ||||||||||||||
Type | D | V3 | V4 | V5 | V6 | V8 | V10 | V12 | V3 | V4 | V5 | V6 | V8 | V10 | V12 |
T3 | T5 | ||||||||||||||
| DJW | 10 | 0.4 | 0.4 | 0.4 | — | — | — | — | 0.7 | 0.7 | 0.6 | — | — | — | — |
| 12 | — | 0.6 | 0.6 | 0.5 | — | — | — | — | 1.0 | 0.9 | 0.8 | — | — | — | |
| 16 | — | — | 1.1 | 1.0 | 0.9 | — | — | — | — | 1.8 | 1.7 | 1.5 | — | — | |
| 20 | — | — | 1.8 | 1.7 | 1.6 | — | — | — | — | 2.9 | 2.9 | 2.6 | — | — | |
| 25 | — | — | 2.8 | 2.8 | 2.6 | 2.5 | — | — | — | 4.9 | 4.6 | 4.4 | 4.1 | — | |
| 30 | — | — | — | — | — | 3.8 | 3.6 | — | — | — | — | — | 6.3 | 5.9 | |
| Part Number | V Selection | L | ||||||
| Type | D | |||||||
| DJC | 8 | 3 | 4 | 5 | 10 20 30 | |||
| 10 | 4 | 5 | 6 | |||||
| 12 | 4 | 5 | 6 | 8 | ||||
| 16 | 5 | 6 | 8 | |||||
| 20 | 5 | 6 | 8 | 10 | ||||
| 25 | 5 | 6 | 8 | 10 | ||||
Part Number | Mass (g) (Reference Values) | ||||||||||||||||||
Type | D | V3 | V4 | V5 | V6 | V8 | V10 | V3 | V4 | V5 | V6 | V8 | V10 | V3 | V4 | V5 | V6 | V8 | V10 |
L10 | L20 | L30 | |||||||||||||||||
| DJC | 8 | 0.9 | 0.8 | 0.6 | — | — | — | 1.7 | 1.5 | 1.2 | — | — | — | 3.0 | 3.0 | 3.0 | — | — | — |
| 10 | — | 1.3 | 1.2 | 1.0 | — | — | — | 2.6 | 2.4 | 2.0 | — | — | — | 4.6 | 4.6 | 3.0 | — | — | |
| 12 | — | 2.0 | 1.9 | 1.7 | 1.3 | — | — | 4.0 | 3.7 | 3.4 | 2.5 | — | — | 6.7 | 6.7 | 6.7 | 6.7 | — | |
| 16 | — | — | 3.6 | 3.5 | 3.0 | — | — | — | 7.3 | 6.9 | 6.0 | — | — | — | 11.8 | 11.9 | 11.9 | — | |
| 20 | — | — | 5.9 | 5.7 | 5.3 | 4.7 | — | — | 11.8 | 11.4 | 10.6 | 9.4 | — | — | 18.5 | 18.5 | 18.5 | 18.6 | |
| 25 | — | — | 9.4 | 9.3 | 8.8 | 8.2 | — | — | 18.8 | 18.5 | 17.6 | 16.5 | — | — | 28.3 | 27.8 | 26.4 | 24.7 | |
| ■Properties of thermal insulation material (The values are for reference, and not guaranteed.) | ||||||
| Mechanical Properties | Thermal and Electrical Characteristics | |||||
| Tensile Strength | Mpa | 108 | Deflection Temperature under Load (1.82Mpa) | °C | 400 or more | |
| Elongation | % | 0.7 | Linear Expansion Coefficient | 1/°C | 2.6 to 3.5 × 10−5*2 | |
| Bending Strength | Vertical | Mpa | 145 to 130*1 | Thermal Conductivity | W/m·K (cal/cm·sec·°C) | 0.24 (5.7 × 10−4) |
| Dielectric Constant (1MHz) | — | 3.8 | ||||
| Flexural Modulus | 17900 | Dissipation Factor (1MHz) | — | 0.005 | ||
| Compression Strength | Vertical | 439 to 410*1 | Volume Resistivity | Ω·cm | 1.0 × 1014 | |
| Parallel | 98 to 90*1 | Dielectric Breakdown Strength (Breakdown Voltage) | kV/mm | 15 | ||
| Izod Impact Strength (Notched) | J/cm | 2.9 | Arc Resistance | sec | 345 | |
| Rockwell Hardness | R | R113 | Water Absorption Ratio (23°C underwater × 24h) | % | 0.05 | |
| Glass Fiber Content | — | Available | Operating Ambient Temperature | °C | Up to 400 | |
| Specific Gravity | — | 2.0 | ||||
| [ ! ] * 1 Bending Strength maintains the minimum value even at 400°C. [ ! ] *2 2.6 = ambient temperature up to 200°C, 3.5 = ambient temperature up to 400°C. | ||||||
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
| Part Number |
|---|
| DJC8-3-10 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | O.D. (mm) | Inner Dia. (mm) | Thickness/Length |
|---|---|---|---|---|---|---|---|---|
MYR 26.45 | 1 Piece(s) | Available | 4 Day(s) or more | 10 | 8 | 3 | 10 |
Loading...
More Information
| Mechanical Properties | Thermal and Electrical Characteristics | |||||
| Tensile Strength | MPa | 108 | Deflection Temperature under Load (1.82Mpa) | °C | 400~ | |
| Elongation | % | 0.7 | Linear Expansion Coefficient | 1/°C | 2.6~3.5x10-5 *2 | |
| Bending Strength | Vertical | MPa | 145~130 *1 | Thermal Conductivity | W/m • K (cal/cm/sec/°C) | 0.24 (5.7x10-4) |
| Dielectric Constant (1MHz) | - | 3.8 | ||||
| Flexural Modulus | 17900 | Dissipation Factor (1MHz) | - | 0.005 | ||
| Compression Strength | Vertical | 439~410 *1 | Volume Resistivity | Ω-cm | 1.0x1014 | |
| Parallel | 98 ~ 90 *1 | Dielectric Breakdown Strength (Breakdown Voltage) | kV/mm | 15 | ||
| Izot Impact Strength (Notched) | J/cm | 2.9 | Arc Resistance | sec | 345 | |
| Rockwell Hardness | R | R113 | Moisture Absorption (At 23°Cx24h) | % | 0.05 | |
| Glass Fiber Content | - | Available | Ambient Operating Temperature | °C | ~400 | |
| Specific Gravity | - | 2.0 | ||||
| [ ! ] *1 Bending Strength maintains the minimum value even at 400 degrees Celsius. [ ! ] *2 2.6 = ambient temperature ~ 200°C, 3.5 = ambient temperature ~ 400°C. | ||||||
Basic Information
| Shape | Standard | Material | Thermal Insulation Material | Material Detail | Main Base Material: Glass Fiber Main Material: Calcium Silicate Base Binder |
|---|---|---|---|---|---|
| Hole Type | Through Hole | Sale Type | Sold Separately |
Please check the type/dimensions/specifications of the part DJC8-3-10 in the Thermal Insulation Washers / Collars - (Heat Insulation Material) series.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Products like this...
| Part Number |
|---|
| DJC10-5-30 |
| DJC10-6-10 |
| DJC10-6-30 |
| DJC8-3-30 |
| DJC8-4-10 |
| DJC8-4-30 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | O.D. (mm) | Inner Dia. (mm) | Thickness/Length |
|---|---|---|---|---|---|---|---|---|
MYR 61.72 | 1 Piece(s) | Available | 4 Day(s) or more | 10 | 10 | 5 | 30 | |
MYR 30.86 | 1 Piece(s) | Available | 4 Day(s) or more | 10 | 10 | 6 | 10 | |
MYR 61.72 | 1 Piece(s) | Available | 4 Day(s) or more | 10 | 10 | 6 | 30 | |
MYR 49.59 | 1 Piece(s) | Available | 4 Day(s) or more | 10 | 8 | 3 | 30 | |
MYR 26.45 | 1 Piece(s) | Available | 4 Day(s) or more | 10 | 8 | 4 | 10 | |
MYR 49.59 | 1 Piece(s) | Available | 4 Day(s) or more | 10 | 8 | 4 | 30 |
Additional Products in this Category
- Resin Washers - POM/MC Nylon/Bakelite/PEEK/Epoxy Glass
- [Clean & Pack]Resin Washers - Flanged Solid / Flanged
- Nylon Washer NN
- Fiber Washer (Red/White) EE-R/EE-W
- Bake, Washer XX
- Insulation Sleeve (for Bolts, PTFE)
- ABS Spacer (Hollow) / CA-B
- Bake Spacer (Hollow) CX/CX-B
Complementary Products
-
Hex Socket Head Cap Screws with Hole
MISUMI Standard Price : MYR 11.55- Days to Ship : 4 Day(s) or more
-
Plastic Cross Recessed Pan Head Screws - Pkg. / Small Box
MISUMI Standard Price : MYR 112.75- Days to Ship : 4 Day(s) or more
Customers Who Viewed This Item Also Viewed
-
Collar with Flange (Heat Insulation Material)MISUMI
Standard Price : MYR 71.64-
Days to Ship : 2 Day(s) or more
-
-
-
-
Heat Insulating Plates/High Strength/High Temperature Resistant GradeMISUMI
Days to Ship : 5 Day(s) or more
-
-
Resin Collar - Flanged - POM/MC Nylon/Bakelite/PEEK/Epoxy GlassMISUMI
Days to Ship : 5 Day(s) or more
-
Heat Insulating Plates/High Temperature Insulating/Super Insulating GradeMISUMI
Days to Ship : 6 Day(s) or more
-
-
-
Collars - Fluororesin with FlangeMISUMI
Standard Price : MYR 15.94-
Days to Ship : 2 Day(s) or more
-
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy