[Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Locating Pins for Fixtures - Standard grade h7, Short Set Screw, Tip Shape Selectable (Circumference Groove)

[Applications]Jig positioning pin, medium class, set screw thread section short type. [Features]Since the set screw thread section is short, it can be used for thin locators. 2 types of tip shapes are available.

(i)Caution

Please check the content on our website as the PDF does not contain the most up-to-date information.

Part Number

Configured Part Number is shown.

Locating Pins for Fixtures - Standard Grade, Short Set Screw, Tip Shape Selectable, Circumference Groove:Related Image

[ ! ] For Diamond Shapes, a step will be produced at the base of the P dimension.

Type			[ M ]Material	[ H ]Hardness
Shouldered	No Shoulder	Shape
ELASA#	ELNSA#	Round	SCM435eel	Treated Hardness 35~40HRC
ELASD#	ELNSD#	Diamond
TELASA#	TELNSA#	Round	SCM415	Carburized Treated Hardness: 55HRC~ (Depth: 0.7 ~ 0.8)
TELASD#	TELNSD#	Diamond

Specifications

Part Number			-	P	-	B	-	L	-	A	-	E

Type	Tip Shape	D
ELASA	A	6	-	P5.0	-	B10	-	L5	-	A60	-	E5

■Circumference Groove Shape

D	ℓ₁	d	Applicable Set Screw
6	6	4	M5
8		5
10		7
12	8	9	M6
16		13
20		17

■Shouldered

Part Number					P 0.1mm Increment	B 1mm Increment	L	A Selection	E (Shape A) 1mm Increment	H	R	W
Type		Tip Shape	D_h7				Circumference Groove Shape 1mm Increment
[Circumference Groove]
Hardened (Round) ELASA (Diamond) ELASD	Hardened (Round) TELASA (Diamond) TELASD	A (Tapered) B (Taper R)	6	0 -0.012	3.0~7.0	2~30 (B≤Px4)	5~10	*30 60 90 120	1~10	9	1	1~2
			8	0 -0.015	3.0~9.0					11	1.5	1~2
			10	0 -0.015	4.5~12.0					13	2	1~3
			12	0 -0.018	9.0~13.0					15	3	4
			16	0 -0.018	13.0~16.0					19	4	5

[ ! ]W Dimension D6, D8: W=2 when P>5.0 D10: W=1 when P<5.0, W=2 when 5.0≤P≤7.0, W=3 when P>7.0 [ NG ]Angle A*30 is not applicable to Tip Shape B of Circumference Groove. Select from Circumference Groove Type (P.1699).
[ ! ]Conventional RC alteration (change of angle) can be substituted with Tip Shape B.

■No Shoulder

Part Number					P 0.1mm Increment	B 1mm Increment	L	A Selection	E (Shape A) 1mm Increment	R	W
Type		Tip Shape	D_h7				Circumference Groove Shape 1mm Increment
[Circumference Groove]
Hardened (Round) ELNSA (Diamond) ELNSD	Hardened (Round) TELNSA (Diamond) TELNSD	A (Tapered) B (Taper R)	6	0 -0.012	8.0~12.0	[ ! ]2~30	5~10	*30 60 90 120	1~10	3	3
			8	0 -0.015	10.0~16.0					4	3.5
			10	0 -0.015	12.0~20.0					4	4
			12	0 -0.018	14.0~25.0					6	6
			16	0 -0.018	18.0~32.0					8	8
			20	0 -0.021	22.0~35.0					8	9

[ NG ]Angle A*30 is not applicable to Tip Shape B of Circumference Groove. Select from Circumference Groove Type (P.1699). [ ! ]Conventional RC alteration (change of angle) can be substituted with Tip Shape B.
[ ! ]B Dimension is selectable from 5 mm ~ for Diamond Shape.

Alterations

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 45; 60

Part Number
ELASAA6-P[3-8/0.1]-B[2-30/1]-L[5-10/1]-A[30,60,90,120]-E[1-10/1]
ELASAA8-P[3-10/0.1]-B[2-30/1]-L[5-10/1]-A[30,60,90,120]-E[1-10/1]
ELASAA10-P[4.5-12/0.1]-B[2-30/1]-L[5-10/1]-A[30,60,90,120]-E[1-10/1]
ELASAA12-P[9-14/0.1]-B[2-30/1]-L[5-10/1]-A[30,60,90,120]-E[1-10/1]
ELASAA16-P[13-18/0.1]-B[2-30/1]-L[5-10/1]-A[30,60,90,120]-E[1-10/1]
ELASAB6-P[3-8/0.1]-B[2-30/1]-L[5-10/1]-A[60,90,120]
ELASAB8-P[3-10/0.1]-B[2-30/1]-L[5-10/1]-A[60,90,120]
ELASAB10-P[4.5-12/0.1]-B[2-30/1]-L[5-10/1]-A[60,90,120]
ELASAB12-P[9-14/0.1]-B[2-30/1]-L[5-10/1]-A[60,90,120]
ELASAB16-P[13-18/0.1]-B[2-30/1]-L[5-10/1]-A[60,90,120]
ELASDA6-P[3-8/0.1]-B[2-30/1]-L[5-10/1]-A[30,60,90,120]-E[1-10/1]
ELASDA8-P[3-10/0.1]-B[2-30/1]-L[5-10/1]-A[30,60,90,120]-E[1-10/1]
ELASDA10-P[4.5-12/0.1]-B[2-30/1]-L[5-10/1]-A[30,60,90,120]-E[1-10/1]
ELASDA12-P[9-14/0.1]-B[2-30/1]-L[5-10/1]-A[30,60,90,120]-E[1-10/1]
ELASDA16-P[13-18/0.1]-B[2-30/1]-L[5-10/1]-A[30,60,90,120]-E[1-10/1]
ELASDB6-P[3-8/0.1]-B[2-30/1]-L[5-10/1]-A[60,90,120]
ELASDB8-P[3-10/0.1]-B[2-30/1]-L[5-10/1]-A[60,90,120]
ELASDB10-P[4.5-12/0.1]-B[2-30/1]-L[5-10/1]-A[60,90,120]
ELASDB12-P[9-14/0.1]-B[2-30/1]-L[5-10/1]-A[60,90,120]
ELASDB16-P[13-18/0.1]-B[2-30/1]-L[5-10/1]-A[60,90,120]
ELNSAA6-P[8-12/0.1]-B[2-30/1]-L[5-10/1]-A[30,60,90,120]-E[1-10/1]
ELNSAA8-P[10-16/0.1]-B[2-30/1]-L[5-10/1]-A[30,60,90,120]-E[1-10/1]
ELNSAA10-P[12-20/0.1]-B[2-30/1]-L[5-10/1]-A[30,60,90,120]-E[1-10/1]
ELNSAA12-P[14-25/0.1]-B[2-30/1]-L[5-10/1]-A[30,60,90,120]-E[1-10/1]
ELNSAA16-P[18-32/0.1]-B[2-30/1]-L[5-10/1]-A[30,60,90,120]-E[1-10/1]
ELNSAA20-P[22-35/0.1]-B[2-30/1]-L[5-10/1]-A[30,60,90,120]-E[1-10/1]
ELNSAB6-P[8-12/0.1]-B[2-30/1]-L[5-10/1]-A[60,90,120]
ELNSAB8-P[10-16/0.1]-B[2-30/1]-L[5-10/1]-A[60,90,120]
ELNSAB10-P[12-20/0.1]-B[2-30/1]-L[5-10/1]-A[60,90,120]
ELNSAB12-P[14-25/0.1]-B[2-30/1]-L[5-10/1]-A[60,90,120]
ELNSAB16-P[18-32/0.1]-B[2-30/1]-L[5-10/1]-A[60,90,120]
ELNSAB20-P[22-35/0.1]-B[2-30/1]-L[5-10/1]-A[60,90,120]
ELNSDA6-P[8-12/0.1]-B[5-30/1]-L[5-10/1]-A[30,60,90,120]-E[1-10/1]
ELNSDA8-P[10-16/0.1]-B[5-30/1]-L[5-10/1]-A[30,60,90,120]-E[1-10/1]
ELNSDA10-P[12-20/0.1]-B[5-30/1]-L[5-10/1]-A[30,60,90,120]-E[1-10/1]
ELNSDA12-P[14-25/0.1]-B[5-30/1]-L[5-10/1]-A[30,60,90,120]-E[1-10/1]
ELNSDA16-P[18-32/0.1]-B[5-30/1]-L[5-10/1]-A[30,60,90,120]-E[1-10/1]
ELNSDA20-P[22-35/0.1]-B[5-30/1]-L[5-10/1]-A[30,60,90,120]-E[1-10/1]
ELNSDB6-P[8-12/0.1]-B[5-30/1]-L[5-10/1]-A[30,60,90,120]
ELNSDB8-P[10-16/0.1]-B[5-30/1]-L[5-10/1]-A[30,60,90,120]
ELNSDB10-P[12-20/0.1]-B[5-30/1]-L[5-10/1]-A[30,60,90,120]
ELNSDB12-P[14-25/0.1]-B[5-30/1]-L[5-10/1]-A[30,60,90,120]
ELNSDB16-P[18-32/0.1]-B[5-30/1]-L[5-10/1]-A[30,60,90,120]
ELNSDB20-P[22-35/0.1]-B[5-30/1]-L[5-10/1]-A[12,30,60,90,120]
TELASAA6-P[3-8/0.1]-B[2-30/1]-L[5-10/1]-A[30,60,90,120]-E[1-10/1]
TELASAA8-P[3-10/0.1]-B[2-30/1]-L[5-10/1]-A[30,60,90,120]-E[1-10/1]
TELASAA10-P[4.5-12/0.1]-B[2-30/1]-L[5-10/1]-A[30,60,90,120]-E[1-10/1]
TELASAA12-P[9-14/0.1]-B[2-30/1]-L[5-10/1]-A[30,60,90,120]-E[1-10/1]
TELASAA16-P[13-18/0.1]-B[2-30/1]-L[5-10/1]-A[30,60,90,120]-E[1-10/1]
TELASAB6-P[3-8/0.1]-B[2-30/1]-L[5-10/1]-A[30,60,90,120]
TELASAB8-P[3-9/0.1]-B[2-30/1]-L[5-10/1]-A[30,60,90,120]
TELASAB10-P[4.5-12/0.1]-B[2-30/1]-L[5-10/1]-A[30,60,90,120]
TELASAB12-P[9-14/0.1]-B[2-30/1]-L[5-10/1]-A[30,60,90,120]
TELASAB16-P[13-18/0.1]-B[2-30/1]-L[5-10/1]-A[30,60,90,120]
TELASDA6-P[3-8/0.1]-B[2-30/1]-L[5-10/1]-A[30,60,90,120]-E[1-10/1]
TELASDA8-P[3-10/0.1]-B[2-30/1]-L[5-10/1]-A[30,60,90,120]-E[1-10/1]
TELASDA10-P[4.5-12/0.1]-B[2-30/1]-L[5-10/1]-A[30,60,90,120]-E[1-10/1]
TELASDA12-P[9-14/0.1]-B[2-30/1]-L[5-10/1]-A[30,60,90,120]-E[1-10/1]
TELASDA16-P[13-18/0.1]-B[2-30/1]-L[5-10/1]-A[30,60,90,120]-E[1-10/1]
TELASDB6-P[3-8/0.1]-B[2-30/1]-L[5-10/1]-A[30,60,90,120]

Standard Unit Price	Minimum order quantity	Days to Ship	RoHS	Basic Shape	Insertion Guide Tip Type	Insertion Guide Tip Shape	Insertion Guide Outer Dia. P (Ø)	Mounting Side Outer Dia. D (Ø)	Material	Heat Treatment	A	B	E	L
-	1 Piece(s)	7 Day(s)	10	Pin for Fixtures - Shouldered	Tapered (Shape A)	Round	3 ～ 8	6	[Steel] SCM435	Directly Quenching	30 ～ 60	2 ～ 30	1 ～ 10	5 ～ 10
-	1 Piece(s)	7 Day(s)	10	Pin for Fixtures - Shouldered	Tapered (Shape A)	Round	3 ～ 10	8	[Steel] SCM435	Directly Quenching	30 ～ 60	2 ～ 30	1 ～ 10	5 ～ 10
-	1 Piece(s)	7 Day(s)	10	Pin for Fixtures - Shouldered	Tapered (Shape A)	Round	4.5 ～ 12	10	[Steel] SCM435	Directly Quenching	30 ～ 120	2 ～ 30	1 ～ 10	5 ～ 10
-	1 Piece(s)	7 Day(s)	10	Pin for Fixtures - Shouldered	Tapered (Shape A)	Round	9 ～ 14	12	[Steel] SCM435	Directly Quenching	30 ～ 60	2 ～ 30	1 ～ 10	5 ～ 10
-	1 Piece(s)	7 Day(s)	10	Pin for Fixtures - Shouldered	Tapered (Shape A)	Round	13 ～ 18	16	[Steel] SCM435	Directly Quenching	30 ～ 60	2 ～ 30	1 ～ 10	5 ～ 10
-	1 Piece(s)	7 Day(s)	10	Pin for Fixtures - Shouldered	Tip R (Shape B)	Round	3 ～ 8	6	[Steel] SCM435	Directly Quenching	60	2 ～ 30	-	5 ～ 10
-	1 Piece(s)	7 Day(s)	10	Pin for Fixtures - Shouldered	Tip R (Shape B)	Round	3 ～ 10	8	[Steel] SCM435	Directly Quenching	60	2 ～ 30	-	5 ～ 10
-	1 Piece(s)	7 Day(s)	10	Pin for Fixtures - Shouldered	Tip R (Shape B)	Round	4.5 ～ 12	10	[Steel] SCM435	Directly Quenching	60 ～ 120	2 ～ 30	-	5 ～ 10
-	1 Piece(s)	7 Day(s)	10	Pin for Fixtures - Shouldered	Tip R (Shape B)	Round	9 ～ 14	12	[Steel] SCM435	Directly Quenching	60	2 ～ 30	-	5 ～ 10
-	1 Piece(s)	7 Day(s)	10	Pin for Fixtures - Shouldered	Tip R (Shape B)	Round	13 ～ 18	16	[Steel] SCM435	Directly Quenching	60	2 ～ 30	-	5 ～ 10
-	1 Piece(s)	7 Day(s)	10	Pin for Fixtures - Shouldered	Tapered (Shape A)	Diamond	3 ～ 8	6	[Steel] SCM435	Directly Quenching	30 ～ 60	2 ～ 30	1 ～ 10	5 ～ 10
-	1 Piece(s)	7 Day(s)	10	Pin for Fixtures - Shouldered	Tapered (Shape A)	Diamond	3 ～ 10	8	[Steel] SCM435	Directly Quenching	30 ～ 60	2 ～ 30	1 ～ 10	5 ～ 10
-	1 Piece(s)	7 Day(s)	10	Pin for Fixtures - Shouldered	Tapered (Shape A)	Diamond	4.5 ～ 12	10	[Steel] SCM435	Directly Quenching	30 ～ 120	2 ～ 30	1 ～ 10	5 ～ 10
-	1 Piece(s)	7 Day(s)	10	Pin for Fixtures - Shouldered	Tapered (Shape A)	Diamond	9 ～ 14	12	[Steel] SCM435	Directly Quenching	30 ～ 60	2 ～ 30	1 ～ 10	5 ～ 10
-	1 Piece(s)	7 Day(s)	10	Pin for Fixtures - Shouldered	Tapered (Shape A)	Diamond	13 ～ 18	16	[Steel] SCM435	Directly Quenching	30 ～ 60	2 ～ 30	1 ～ 10	5 ～ 10
-	1 Piece(s)	7 Day(s)	10	Pin for Fixtures - Shouldered	Tip R (Shape B)	Diamond	3 ～ 8	6	[Steel] SCM435	Directly Quenching	60	2 ～ 30	-	5 ～ 10
-	1 Piece(s)	7 Day(s)	10	Pin for Fixtures - Shouldered	Tip R (Shape B)	Diamond	3 ～ 10	8	[Steel] SCM435	Directly Quenching	60	2 ～ 30	-	5 ～ 10
-	1 Piece(s)	7 Day(s)	10	Pin for Fixtures - Shouldered	Tip R (Shape B)	Diamond	4.5 ～ 12	10	[Steel] SCM435	Directly Quenching	60 ～ 120	2 ～ 30	-	5 ～ 10
-	1 Piece(s)	7 Day(s)	10	Pin for Fixtures - Shouldered	Tip R (Shape B)	Diamond	9 ～ 14	12	[Steel] SCM435	Directly Quenching	60	2 ～ 30	-	5 ～ 10
-	1 Piece(s)	7 Day(s)	10	Pin for Fixtures - Shouldered	Tip R (Shape B)	Diamond	13 ～ 18	16	[Steel] SCM435	Directly Quenching	60	2 ～ 30	-	5 ～ 10
-	1 Piece(s)	7 Day(s)	10	Pin for Fixtures - No Shoulder	Tapered (Shape A)	Round	8 ～ 12	6	[Steel] SCM435	Directly Quenching	30 ～ 120	2 ～ 30	1 ～ 10	5 ～ 10
-	1 Piece(s)	7 Day(s)	10	Pin for Fixtures - No Shoulder	Tapered (Shape A)	Round	10 ～ 16	8	[Steel] SCM435	Directly Quenching	30 ～ 120	2 ～ 30	1 ～ 10	5 ～ 10
-	1 Piece(s)	7 Day(s)	10	Pin for Fixtures - No Shoulder	Tapered (Shape A)	Round	12 ～ 20	10	[Steel] SCM435	Directly Quenching	30 ～ 120	2 ～ 30	1 ～ 10	5 ～ 10
-	1 Piece(s)	7 Day(s)	10	Pin for Fixtures - No Shoulder	Tapered (Shape A)	Round	14 ～ 25	12	[Steel] SCM435	Directly Quenching	30 ～ 120	2 ～ 30	1 ～ 10	5 ～ 10
-	1 Piece(s)	7 Day(s)	10	Pin for Fixtures - No Shoulder	Tapered (Shape A)	Round	18 ～ 32	16	[Steel] SCM435	Directly Quenching	30 ～ 120	2 ～ 30	1 ～ 10	5 ～ 10
-	1 Piece(s)	7 Day(s)	10	Pin for Fixtures - No Shoulder	Tapered (Shape A)	Round	22 ～ 35	20	[Steel] SCM435	Directly Quenching	30 ～ 120	2 ～ 30	1 ～ 10	5 ～ 10
-	1 Piece(s)	7 Day(s)	10	Pin for Fixtures - No Shoulder	Tip R (Shape B)	Round	8 ～ 12	6	[Steel] SCM435	Directly Quenching	60 ～ 120	2 ～ 30	-	5 ～ 10
-	1 Piece(s)	7 Day(s)	10	Pin for Fixtures - No Shoulder	Tip R (Shape B)	Round	10 ～ 16	8	[Steel] SCM435	Directly Quenching	60 ～ 120	2 ～ 30	-	5 ～ 10
-	1 Piece(s)	7 Day(s)	10	Pin for Fixtures - No Shoulder	Tip R (Shape B)	Round	12 ～ 20	10	[Steel] SCM435	Directly Quenching	60 ～ 120	2 ～ 30	-	5 ～ 10
-	1 Piece(s)	7 Day(s)	10	Pin for Fixtures - No Shoulder	Tip R (Shape B)	Round	14 ～ 25	12	[Steel] SCM435	Directly Quenching	60 ～ 120	2 ～ 30	-	5 ～ 10
-	1 Piece(s)	7 Day(s)	10	Pin for Fixtures - No Shoulder	Tip R (Shape B)	Round	18 ～ 32	16	[Steel] SCM435	Directly Quenching	60 ～ 120	2 ～ 30	-	5 ～ 10
-	1 Piece(s)	7 Day(s)	10	Pin for Fixtures - No Shoulder	Tip R (Shape B)	Round	22 ～ 35	20	[Steel] SCM435	Directly Quenching	60 ～ 120	2 ～ 30	-	5 ～ 10
-	1 Piece(s)	7 Day(s)	10	Pin for Fixtures - No Shoulder	Tapered (Shape A)	Diamond	8 ～ 12	6	[Steel] SCM435	Directly Quenching	30 ～ 120	5 ～ 30	1 ～ 10	5 ～ 10
-	1 Piece(s)	7 Day(s)	10	Pin for Fixtures - No Shoulder	Tapered (Shape A)	Diamond	10 ～ 16	8	[Steel] SCM435	Directly Quenching	30 ～ 120	5 ～ 30	1 ～ 10	5 ～ 10
-	1 Piece(s)	7 Day(s)	10	Pin for Fixtures - No Shoulder	Tapered (Shape A)	Diamond	12 ～ 20	10	[Steel] SCM435	Directly Quenching	30 ～ 120	5 ～ 30	1 ～ 10	5 ～ 10
-	1 Piece(s)	7 Day(s)	10	Pin for Fixtures - No Shoulder	Tapered (Shape A)	Diamond	14 ～ 25	12	[Steel] SCM435	Directly Quenching	30 ～ 120	5 ～ 30	1 ～ 10	5 ～ 10
-	1 Piece(s)	7 Day(s)	10	Pin for Fixtures - No Shoulder	Tapered (Shape A)	Diamond	18 ～ 32	16	[Steel] SCM435	Directly Quenching	30 ～ 120	5 ～ 30	1 ～ 10	5 ～ 10
-	1 Piece(s)	7 Day(s)	10	Pin for Fixtures - No Shoulder	Tapered (Shape A)	Diamond	22 ～ 35	20	[Steel] SCM435	Directly Quenching	30 ～ 120	5 ～ 30	1 ～ 10	5 ～ 10
-	1 Piece(s)	7 Day(s)	10	Pin for Fixtures - No Shoulder	Tip R (Shape B)	Diamond	8 ～ 12	6	[Steel] SCM435	Directly Quenching	30 ～ 60	5 ～ 30	-	5 ～ 10
-	1 Piece(s)	7 Day(s)	10	Pin for Fixtures - No Shoulder	Tip R (Shape B)	Diamond	10 ～ 16	8	[Steel] SCM435	Directly Quenching	30 ～ 60	5 ～ 30	-	5 ～ 10
-	1 Piece(s)	7 Day(s)	10	Pin for Fixtures - No Shoulder	Tip R (Shape B)	Diamond	12 ～ 20	10	[Steel] SCM435	Directly Quenching	30 ～ 60	5 ～ 30	-	5 ～ 10
-	1 Piece(s)	7 Day(s)	10	Pin for Fixtures - No Shoulder	Tip R (Shape B)	Diamond	14 ～ 25	12	[Steel] SCM435	Directly Quenching	30 ～ 60	5 ～ 30	-	5 ～ 10
-	1 Piece(s)	7 Day(s)	10	Pin for Fixtures - No Shoulder	Tip R (Shape B)	Diamond	18 ～ 32	16	[Steel] SCM435	Directly Quenching	30 ～ 60	5 ～ 30	-	5 ～ 10
-	1 Piece(s)	7 Day(s)	10	Pin for Fixtures - No Shoulder	Tip R (Shape B)	Diamond	22 ～ 35	20	[Steel] SCM435	Directly Quenching	12 ～ 60	5 ～ 30	-	5 ～ 10
-	1 Piece(s)	9 Day(s)	10	Pin for Fixtures - Shouldered	Tapered (Shape A)	Round	3 ～ 8	6	[Steel] SCM415	Carburized	30 ～ 60	2 ～ 30	1 ～ 10	5 ～ 10
-	1 Piece(s)	9 Day(s)	10	Pin for Fixtures - Shouldered	Tapered (Shape A)	Round	3 ～ 10	8	[Steel] SCM415	Carburized	30 ～ 60	2 ～ 30	1 ～ 10	5 ～ 10
-	1 Piece(s)	9 Day(s)	10	Pin for Fixtures - Shouldered	Tapered (Shape A)	Round	4.5 ～ 12	10	[Steel] SCM415	Carburized	30 ～ 60	2 ～ 30	1 ～ 10	5 ～ 10
-	1 Piece(s)	9 Day(s)	10	Pin for Fixtures - Shouldered	Tapered (Shape A)	Round	9 ～ 14	12	[Steel] SCM415	Carburized	30 ～ 60	2 ～ 30	1 ～ 10	5 ～ 10
-	1 Piece(s)	9 Day(s)	10	Pin for Fixtures - Shouldered	Tapered (Shape A)	Round	13 ～ 18	16	[Steel] SCM415	Carburized	30 ～ 60	2 ～ 30	1 ～ 10	5 ～ 10
-	1 Piece(s)	9 Day(s)	10	Pin for Fixtures - Shouldered	Tip R (Shape B)	Round	3 ～ 8	6	[Steel] SCM415	Carburized	30 ～ 60	2 ～ 30	-	5 ～ 10
-	1 Piece(s)	9 Day(s)	10	Pin for Fixtures - Shouldered	Tip R (Shape B)	Round	3 ～ 9	8	[Steel] SCM415	Carburized	30 ～ 120	2 ～ 30	-	5 ～ 10
-	1 Piece(s)	9 Day(s)	10	Pin for Fixtures - Shouldered	Tip R (Shape B)	Round	4.5 ～ 12	10	[Steel] SCM415	Carburized	30 ～ 60	2 ～ 30	-	5 ～ 10
-	1 Piece(s)	9 Day(s)	10	Pin for Fixtures - Shouldered	Tip R (Shape B)	Round	9 ～ 14	12	[Steel] SCM415	Carburized	30 ～ 60	2 ～ 30	-	5 ～ 10
-	1 Piece(s)	9 Day(s)	10	Pin for Fixtures - Shouldered	Tip R (Shape B)	Round	13 ～ 18	16	[Steel] SCM415	Carburized	30 ～ 60	2 ～ 30	-	5 ～ 10
-	1 Piece(s)	9 Day(s)	10	Pin for Fixtures - Shouldered	Tapered (Shape A)	Diamond	3 ～ 8	6	[Steel] SCM415	Carburized	30 ～ 60	2 ～ 30	1 ～ 10	5 ～ 10
-	1 Piece(s)	9 Day(s)	10	Pin for Fixtures - Shouldered	Tapered (Shape A)	Diamond	3 ～ 10	8	[Steel] SCM415	Carburized	30 ～ 60	2 ～ 30	1 ～ 10	5 ～ 10
-	1 Piece(s)	9 Day(s)	10	Pin for Fixtures - Shouldered	Tapered (Shape A)	Diamond	4.5 ～ 12	10	[Steel] SCM415	Carburized	30 ～ 60	2 ～ 30	1 ～ 10	5 ～ 10
-	1 Piece(s)	9 Day(s)	10	Pin for Fixtures - Shouldered	Tapered (Shape A)	Diamond	9 ～ 14	12	[Steel] SCM415	Carburized	30 ～ 60	2 ～ 30	1 ～ 10	5 ～ 10
-	1 Piece(s)	9 Day(s)	10	Pin for Fixtures - Shouldered	Tapered (Shape A)	Diamond	13 ～ 18	16	[Steel] SCM415	Carburized	30 ～ 60	2 ～ 30	1 ～ 10	5 ～ 10
-	1 Piece(s)	9 Day(s)	10	Pin for Fixtures - Shouldered	Tip R (Shape B)	Diamond	3 ～ 8	6	[Steel] SCM415	Carburized	30 ～ 60	2 ～ 30	-	5 ～ 10

Product TOP

Basic Information

Mounting Side Shape	Circumference Groove (Set Screw)	Insertion Guide Tolerance	Standard Grade 0/-0.05	Concentricity	Standard Grade Ø0.03
Surface Treatment	Not Provided

Configure

88 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Basic Shape
- Pin for Fixtures - Shouldered
- Pin for Fixtures - No Shoulder
Clear
Insertion Guide Tip Type
- Tapered (Shape A)
- Tip R (Shape B)
Clear
Insertion Guide Tip Shape
- Round
- Diamond
Clear
Insertion Guide Outer Dia. P(Ø)
[3-35/0.1Ø Unit(s)]
Clear
Mounting Side Outer Dia. D(Ø)
6

8

10

12

16

20
Clear
Material
- Steel
  - SCM415
  - SCM435
Clear
Heat Treatment
- Directly Quenching
- Carburized
Clear
A
12

30

60

90

120
Clear
B
[2-30/1]
Clear
E
[1-10/1]
Clear
L
[5-10/1]
Clear
type
- ELASAA
- ELASAB
- ELASDA
- ELASDB
- ELNSAA
- ELNSAB
- ELNSDA
- ELNSDB
- TELASAA
- TELASAB
- TELASDA
- TELASDB
- TELNSAA
- TELNSAB
- TELNSDA
- TELNSDB
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

7 Day(s) or Less

9 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Additional Products in this Category

Complementary Products

[High Precision] X-Axis Cross Roller - Micrometer Head
MISUMI Standard Price : MYR 804.71- Days to Ship : 6 Day(s) or more
Angles - Resin
MISUMI Days to Ship : -
Bushings for Locating Pins - Copper Alloy, Flanged
MISUMI Days to Ship : 8 Day(s) or more
Sheet Metal Bracket For 5 Series (Slot Width 6mm) Aluminum Frames - Bent-Shaped
MISUMI Standard Price : MYR 5.78- Days to Ship : 1 Day(s) or more

Customers Who Viewed This Item Also Viewed

Locating Pins for Fixtures - Tip Shape Selectable, Standard Grade, No Shoulder - Set Screw
MISUMI

Days to Ship : 6 Day(s) or more
Locating Pins for Fixtures - Standard grade h7, Short Set Screw, Tip Shape Selectable (Notched)
MISUMI

Days to Ship : 7 Day(s) or more
Locating Pins for Fixtures - Standard h6 (Shoulder-Bolt Fixing)
MISUMI

Days to Ship : 7 Day(s) or more
Locating Pins for Fixtures - Tip Shape Selectable, Standard Grade, Shouldered - Threaded
MISUMI

Days to Ship : 6 Day(s) or more
Locating Pins for Fixtures Height Adjusting Pins - Threaded
MISUMI

Days to Ship : 9 Day(s)
Locating Pins for Fixtures - Tip Shape Selectable, Standard Grade, Shouldered - Set Screw
MISUMI

Days to Ship : 6 Day(s) or more
Locating Pins for Fixtures - Tip Shape Selectable, Standard Grade, No Shoulder - Threaded
MISUMI

Days to Ship : 6 Day(s) or more
Locating Pins for Fixtures - Standard Grade, Shouldered - Set Screw
MISUMI

Days to Ship : 6 Day(s) or more
Locating Pins for Fixtures - Standard Grade, Short Set Screw
MISUMI

Days to Ship : 6 Day(s) or more
Locating Pins for Fixtures - Standard Grade, Shouldered - Threaded
MISUMI

Days to Ship : 6 Day(s) or more
Locating Pins for Fixtures - Oval, Precision/Standard Grade - Shouldered / No Shoulder - Set Screw
MISUMI

Days to Ship : 6 Day(s) or more
Locating Pins for Jig, Standard Set Screw, Short Type, No Flange
MISUMI

Days to Ship : 6 Day(s) or more

back next

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations): Tel：(60) 3 7890 6399; 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday); Technical Inquiry

How can we improve?

Locating Pins for Fixtures - Standard grade h7, Short Set Screw, Tip Shape Selectable (Circumference Groove)

(i)Caution

Specifications

Alterations

Part Number

Basic Information

Configure

Specification/Dimensions

Basic Shape

Insertion Guide Tip Type

Insertion Guide Tip Shape

Insertion Guide Outer Dia. P(Ø)

Mounting Side Outer Dia. D(Ø)

Material

Heat Treatment

A

B

E

L

type

CAD

Days to Ship

Specify Alterations

Additional Products in this Category

Complementary Products

Customers Who Viewed This Item Also Viewed

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm