[Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
[Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Bushings for Locating Pins - Configurable, Shouldered, Standard / Thin Wall

MISUMI

This is a straight type bushing for positioning pins. Custom dimensions are available.

(i)Caution

Please check the content on our website as the PDF does not contain the most up-to-date information.

Part Number

Configured Part Number is shown.

■Standard

[ ! ]

Bushing for Locating Pin, Configurable with Shoulder: Related Image

■Thin-wall type

[ ! ]

■Standard

[M] Material	[S] Surface Treatment	[H] Hardness	Type
[M] Material	[S] Surface Treatment	[H] Hardness	p6	m6	h7
SKS3 Equivalent	—	56 to 60HRC	JBHFP	JBHF	JBHFH
SKS3 Equivalent	Black Oxide	56 to 60HRC	JBHFBP	JBHFB	JBHFBH
SKS3 Equivalent	Electroless Nickel Plating	56 to 60HRC	JBHFMP	JBHFM	JBHFMH
SUS304	—	—	JBHFSP	JBHFS	JBHFSH
SUS440C or 13Cr Stainless Steel	—	50 to 55HRC	JBHFCP	JBHFC	JBHFCH

[ ! ] For hole machining, please note that inner diameter shrinkage of p6 Type is more than that of m6 Type.
■Thin-wall type

[M] Material	[S] Surface Treatment	[H] Hardness	Type
[M] Material	[S] Surface Treatment	[H] Hardness	p6	m6	h7
SKS3 Equivalent	—	56 to 60HRC	JBHUFP	JBHUF	JBHUFH
SKS3 Equivalent	Black Oxide	56 to 60HRC	JBHUFBP	JBHUFB	JBHUFBH
SKS3 Equivalent	Electroless Nickel Plating	56 to 60HRC	JBHUFMP	JBHUFM	JBHUFMH
SUS440C or 13Cr Stainless Steel	—	50 to 55HRC	JBHUFCP	JBHUFC	JBHUFCH

[ ! ] For hole machining, please note that inner diameter shrinkage of p6 Type is more than that of m6 Type.

Specification Table

Part Number	—	P	—	L
JBHFM25	—	P14.00	—	L20.0
JBHUFM15	—	P11.00	—	L20.0

■Standard

Part Number					P 0.01 mm Increments	L 0.1 mm Increments	Thickness (N)	R	H	T
Type	D	D Tolerance
		p6	m6	h7
(p6) JBHFP JBHFBP JBHFMP JBHFSP JBHFCP (m6) JBHF JBHFB JBHFM JBHFS JBHFC (h7) JBHFH JBHFBH JBHFMH JBHFSH JBHFCH	5	+0.020 +0.012	+0.012 +0.004	0 －0.012	2.20 to 2.50	3.0 to 3.5	1.25 to 1.40	0.8	9	2.5
	6						1.75 to 2.50
	7	+0.024 +0.015	+0.015 +0.006	0 －0.015	2.20 to 3.50	3.0 to 6.0	1.75 to 2.50	0.8	11
	8				3.00 to 4.50	3.0 to 10.0	1.75 to 2.50	1.0	12	3
	9				3.00 to 4.50	3.0 to 15.0	1.75 to 2.50		13.5
	10				4.00 to 6.50		1.75 to 3.00		14
	11	+0.029 +0.018	+0.018 +0.007	0 －0.018	4.00 to 6.50	3.0 to 15.0	1.75 to 3.00	1.0	15
	12				6.00 to 8.50		1.75 to 3.00	2.0	16	4
	13								17
	14								18
	15				8.00 to 10.50	5.0 to 35.0	2.25 to 3.50	2.0	19
	16								20
	17								21
	18				10.00 to 12.50		2.75 to 4.00		22
	19	+0.035 +0.022	+0.021 +0.008	0 －0.021	10.00 to 12.50	5.0 to 35.0	2.75 to 4.00		24
	20				12.00 to 13.50		3.25 to 4.00		26	5
	21
	22						4.25 to 5.00		26
	23								28
	24
	25				13.00 to 15.50		4.75 to 6.00		30
	26				15.00 to 16.50		4.75 to 5.50		30
	27								33
	28
	29				16.00 to 16.50
	30				16.00 to 20.50	5.0 to 50.0	4.75 to 7.00	3.0	35	6
	31	+0.042 +0.026	+0.025 +0.009	0 －0.025	16.00 to 20.50	5.0 to 50.0	4.75 to 7.00		36
	32
	33								38
	34
	35				20.00 to 25.00		5.00 to 7.50		40
[ ! ] L + T ≤ P × 2.5 when P ≤ 3.59, L + T ≤ P × 3.0 when P ≥ 3.60 [ ! ] For (D-P)/2≤2, R≤2.

■Thin-wall type

Part Number					P 0.01 mm Increments	L 0.1 mm Increments	Thickness (N)	R	H	T
Type	D	D Tolerance
		p6	m6	h7
(p6) JBHUFP JBHUFBP JBHUFMP JBHUFCP (m6) JBHUF JBHUFB JBHUFM JBHUFC (h7) JBHUFH JBHUFBH JBHUFMH JBHUFCH	5	+0.020 +0.012	+0.012 +0.004	0 －0.012	2.20 to 3.00	3.0 to 5.0	1.00 to 1.40	0.5 or Less	9	2.5
	6				3.00 to 4.00	3.0 to 5.5	1.00 to 1.50
	7	+0.024 +0.015	+0.015 +0.006	0 －0.015	3.51 to 5.00	3.0 to 6.0	1.00 to 1.74	0.5	11
	8				4.51 to 6.00	3.0 to 10.0			12	3
	9				4.51 to 7.00		1.00 to 2.24		13.50
	10				6.51 to 8.00	3.0 to 15.0	1.00 to 1.74		14
	11	+0.029 +0.018	+0.018 +0.007	0 －0.018	8.00 to 9.00	3.0 to 15.0	1.00 to 1.50		15
	12				8.51 to 9.00		1.50 to 1.74		16	4
	13				8.51 to 10.00	5.0 to 35.0	1.50 to 2.24		17
	14				9.00 to 11.00		1.50 to 2.50		18
	15				10.51 to 12.00		1.50 to 2.24		19
	16				10.51 to 12.50		1.75 to 2.75	1.0	20
	17				10.51 to 13.00		2.00 to 3.24		21	5
	18				10.51 to 14.00		2.00 to 2.74		22
	19	+0.035 +0.022	+0.021 +0.008	0 －0.021	12.51 to 14.00	5.0 to 35.0	2.50 to 3.25		24
	20				13.51 to 15.00		2.50 to 3.24		26
	21				13.51 to 15.00		3.00 to 3.75
	22				13.51 to 17.00		2.50 to 4.24
	23				13.51 to 18.00		2.50 to 4.75		28
	24				13.51 to 19.00		2.50 to 5.25
	25				15.51 to 19.00		3.00 to 4.74		30
	26				16.51 to 20.00		3.00 to 4.74
	27				17.51 to 21.00		3.00 to 4.75		33
	28				18.01 to 22.00		3.00 to 5.00
	29				19.01 to 23.00		3.00 to 5.00
	30				20.51 to 24.00		3.00 to 4.74	1.5	35	6
	31	+0.042 +0.026	+0.025 +0.009	0 －0.025	20.51 to 24.00	5.0 to 35.0	3.50 to 5.24		36
	32				22.01 to 25.00		3.50 to 5.00
	33				23.01 to 26.00		3.50 to 5.00		38
	34				24.01 to 27.00		3.50 to 5.00
	35				25.01 to 29.00	5.0 to 50.0	3.00 to 4.99		40
[ ! ] L + T ≤ P × 2.5 when P ≤ 3.59, L + T ≤ P × 3.0 when P ≥ 3.60 [ ! ] For (D-P)/2≤2, R≤2.

Alterations

■Standard

Part Number	—	P	—	L	—	(RC·TC)
JBHFM12	—	P8.00	—	L12.0	—	RC

Alterations	Code	Spec.
I.D. Radius R	RC	Machines Radius R on both sides. Thickness 1.5 mm or more Size of R will be the same as R on shoulder side with D dimension 10 or more. Ordering Code RC [ ! ] When (D-P)/2 ≤ 2, the upper limit is R1.5.
Shoulder Thickness	TC	1 mm Increments Ordering Code TC4 3 ≤ TC < T [ ! ] O.A.L. becomes short as much as T - TC. [ ! ] Applicable when D ≥ 12
Adhesive Groove Machining When L ≤ 13.0 When L > 13.0	RS	Adds an adhesive groove. [ ! ] Number of O.D. Grooves ·When L ≤ 13.0, Adds two grooves ·When L > 13.0, Adds three grooves Ordering Code RS [ ! ] When D ≤ 13, D-P ≥ 3 When D ≥ 14, D-P ≥ 4 [ NG ] Not applicable when L < 9.0

■Thin-wall type

Part Number	—	P	—	L	—	(RC·TC)
JBHUFM11	—	P8.00	—	L12.0	—	RC

Alterations	Code	Spec.
I.D. Radius R	RC	Machines Radius R on both sides. Thickness 1.5 mm or more Size of R will be the same as R on shoulder side with D dimension 10 or more. Ordering Code RC [ ! ] When (D-P)/2 ≤ 2, the upper limit is R1.5.
Shoulder Thickness	TC	1 mm Increments Ordering Code TC4 3 ≤ TC < T [ ! ] O.A.L. becomes short as much as T - TC. [ ! ] Applicable when D ≥ 12

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 45; 60

1
2
3
4
5
Next >>

Part Number
JBHF5-P[2-2.5/0.01]-L[3-3.7/0.1]
JBHF7-P[2-3.5/0.01]-L[3-6.2/0.1]
JBHF8-P[3-4.5/0.01]-L[3-10.5/0.1]
JBHF10-P[4-6.5/0.01]-L[3-15/0.1]
JBHF12-P[6-8.5/0.01]-L[3-15/0.1]
JBHF15-P[8-10.5/0.01]-L[5-35/0.1]
JBHF18-P[10-12.5/0.01]-L[5-35/0.1]
JBHF20-P[12-13.5/0.01]-L[5-35/0.1]
JBHF22-P[12-13.5/0.01]-L[5-35/0.1]
JBHF25-P[13-15.5/0.01]-L[5-35/0.1]
JBHF26-P[15-16.5/0.01]-L[5-35/0.1]
JBHF30-P[16-20.5/0.01]-L[5-50/0.1]
JBHF35-P[20-25/0.01]-L[5-50/0.1]
JBHFB5-P[2.2-2.5/0.01]-L[3-3.5/0.1]
JBHFB7-P[2.2-3.5/0.01]-L[3-6/0.1]
JBHFB8-P[3-4.5/0.01]-L[3-10/0.1]
JBHFB10-P[4-6.5/0.01]-L[3-15/0.1]
JBHFB12-P[6-8.5/0.01]-L[3-15/0.1]
JBHFB15-P[8-10.5/0.01]-L[5-35/0.1]
JBHFB18-P[10-12.5/0.01]-L[5-35/0.1]
JBHFB20-P[12-13.5/0.01]-L[5-35/0.1]
JBHFB22-P[12-13.5/0.01]-L[5-35/0.1]
JBHFB25-P[13-15.5/0.01]-L[5-35/0.1]
JBHFB26-P[15-16.5/0.01]-L[5-35/0.1]
JBHFB30-P[16-20.5/0.01]-L[5-50/0.1]
JBHFB35-P[20-25/0.01]-L[5-50/0.1]
JBHFBP5-P[2.2-2.5/0.01]-L[3-3.5/0.1]
JBHFBP7-P[2-3.5/0.01]-L[3-6/0.1]
JBHFBP8-P[3-4.5/0.01]-L[3-10/0.1]
JBHFBP10-P[4-6.5/0.01]-L[3-15/0.1]
JBHFBP12-P[6-8.5/0.01]-L[3-15/0.1]
JBHFBP15-P[8-10.5/0.01]-L[5-35/0.1]
JBHFBP18-P[10-12.5/0.01]-L[5-35/0.1]
JBHFBP20-P[12-13.5/0.01]-L[5-35/0.1]
JBHFBP22-P[12-13.5/0.01]-L[5-35/0.1]
JBHFBP25-P[13-15.5/0.01]-L[5-35/0.1]
JBHFBP26-P[15-16.5/0.01]-L[5-35/0.1]
JBHFBP30-P[16-20.5/0.01]-L[5-50/0.1]
JBHFBP35-P[20-25/0.01]-L[5-50/0.1]
JBHFC5-P[2.2-2.5/0.01]-L[3-3.5/0.1]
JBHFC7-P[2.2-3.5/0.01]-L[3-6/0.1]
JBHFC8-P[3-4.5/0.01]-L[3-10/0.1]
JBHFC10-P[4-6.5/0.01]-L[3-15/0.1]
JBHFC12-P[6-8.5/0.01]-L[3-15/0.1]
JBHFC15-P[8-10.5/0.01]-L[5-35/0.1]
JBHFC18-P[10-12.5/0.01]-L[5-35/0.1]
JBHFC20-P[12-13.5/0.01]-L[5-35/0.1]
JBHFC22-P[12-13.5/0.01]-L[5-35/0.1]
JBHFC25-P[13-15.5/0.01]-L[5-35/0.1]
JBHFC26-P[15-16.5/0.01]-L[5-35/0.1]
JBHFC30-P[16-20.5/0.01]-L[5-50/0.1]
JBHFC35-P[20-25/0.01]-L[5-50/0.1]
JBHFCP5-P[2.2-2.5/0.01]-L[3-3.5/0.1]
JBHFCP7-P[2.2-3.5/0.01]-L[3-6/0.1]
JBHFCP8-P[3-4.5/0.01]-L[3-10/0.1]
JBHFCP10-P[4-6.5/0.01]-L[3-15/0.1]
JBHFCP12-P[6-8.5/0.01]-L[3-15/0.1]
JBHFCP15-P[8-10.5/0.01]-L[5-35/0.1]
JBHFCP18-P[10-12.5/0.01]-L[5-35/0.1]
JBHFCP20-P[12-13.5/0.01]-L[5-35/0.1]

Standard Unit Price	Minimum order quantity	Days to Ship	RoHS	Inner Diameter (mm)	Outer Diameter (mm)	O.D. Tolerance	Material	Surface Treatment	Material Details	L (mm)
-	1 Piece(s)	7 Day(s)	10	2 ～ 2.5	5	m6	[Steel] SKS3 Equivalent	Not Provided	SKS3 Equiv.	3 ～ 3.7
-	1 Piece(s)	7 Day(s)	10	2 ～ 3.5	7	m6	[Steel] SKS3 Equivalent	Not Provided	SKS3 Equiv.	3 ～ 6.2
-	1 Piece(s)	7 Day(s)	10	3 ～ 4.5	8	m6	[Steel] SKS3 Equivalent	Not Provided	SKS3 Equiv.	3 ～ 10.5
-	1 Piece(s)	7 Day(s)	10	4 ～ 6.5	10	m6	[Steel] SKS3 Equivalent	Not Provided	SKS3 Equiv.	3 ～ 15
-	1 Piece(s)	7 Day(s)	10	6 ～ 8.5	12	m6	[Steel] SKS3 Equivalent	Not Provided	SKS3 Equiv.	3 ～ 15
-	1 Piece(s)	7 Day(s)	10	8 ～ 10.5	15	m6	[Steel] SKS3 Equivalent	Not Provided	SKS3 Equiv.	5 ～ 35
-	1 Piece(s)	7 Day(s)	10	10 ～ 12.5	18	m6	[Steel] SKS3 Equivalent	Not Provided	SKS3 Equiv.	5 ～ 35
-	1 Piece(s)	7 Day(s)	10	12 ～ 13.5	20	m6	[Steel] SKS3 Equivalent	Not Provided	SKS3 Equiv.	5 ～ 35
-	1 Piece(s)	7 Day(s)	10	12 ～ 13.5	22	m6	[Steel] SKS3 Equivalent	Not Provided	SKS3 Equiv.	5 ～ 35
-	1 Piece(s)	7 Day(s)	10	13 ～ 15.5	25	m6	[Steel] SKS3 Equivalent	Not Provided	SKS3 Equiv.	5 ～ 35
-	1 Piece(s)	7 Day(s)	10	15 ～ 16.5	26	m6	[Steel] SKS3 Equivalent	Not Provided	SKS3 Equiv.	5 ～ 35
-	1 Piece(s)	7 Day(s)	10	16 ～ 20.5	30	m6	[Steel] SKS3 Equivalent	Not Provided	SKS3 Equiv.	5 ～ 50
-	1 Piece(s)	7 Day(s)	10	20 ～ 25	35	m6	[Steel] SKS3 Equivalent	Not Provided	SKS3 Equiv.	5 ～ 50
-	1 Piece(s)	7 Day(s)	10	2.2 ～ 2.5	5	m6	[Steel] SKS3 Equivalent	Black Oxide	SKS3 Equiv.	3 ～ 3.5
-	1 Piece(s)	7 Day(s)	10	2.2 ～ 3.5	7	m6	[Steel] SKS3 Equivalent	Black Oxide	SKS3 Equiv.	3 ～ 6
-	1 Piece(s)	7 Day(s)	10	3 ～ 4.5	8	m6	[Steel] SKS3 Equivalent	Black Oxide	SKS3 Equiv.	3 ～ 10
-	1 Piece(s)	7 Day(s)	10	4 ～ 6.5	10	m6	[Steel] SKS3 Equivalent	Black Oxide	SKS3 Equiv.	3 ～ 15
-	1 Piece(s)	7 Day(s)	10	6 ～ 8.5	12	m6	[Steel] SKS3 Equivalent	Black Oxide	SKS3 Equiv.	3 ～ 15
-	1 Piece(s)	7 Day(s)	10	8 ～ 10.5	15	m6	[Steel] SKS3 Equivalent	Black Oxide	SKS3 Equiv.	5 ～ 35
-	1 Piece(s)	7 Day(s)	10	10 ～ 12.5	18	m6	[Steel] SKS3 Equivalent	Black Oxide	SKS3 Equiv.	5 ～ 35
-	1 Piece(s)	7 Day(s)	10	12 ～ 13.5	20	m6	[Steel] SKS3 Equivalent	Black Oxide	SKS3 Equiv.	5 ～ 35
-	1 Piece(s)	7 Day(s)	10	12 ～ 13.5	22	m6	[Steel] SKS3 Equivalent	Black Oxide	SKS3 Equiv.	5 ～ 35
-	1 Piece(s)	7 Day(s)	10	13 ～ 15.5	25	m6	[Steel] SKS3 Equivalent	Black Oxide	SKS3 Equiv.	5 ～ 35
-	1 Piece(s)	7 Day(s)	10	15 ～ 16.5	26	m6	[Steel] SKS3 Equivalent	Black Oxide	SKS3 Equiv.	5 ～ 35
-	1 Piece(s)	7 Day(s)	10	16 ～ 20.5	30	m6	[Steel] SKS3 Equivalent	Black Oxide	SKS3 Equiv.	5 ～ 50
-	1 Piece(s)	7 Day(s)	10	20 ～ 25	35	m6	[Steel] SKS3 Equivalent	Black Oxide	SKS3 Equiv.	5 ～ 50
-	1 Piece(s)	7 Day(s)	10	2.2 ～ 2.5	5	p6	[Steel] SKS3 Equivalent	Black Oxide	SKS3 Equiv.	3 ～ 3.5
-	1 Piece(s)	7 Day(s)	10	2 ～ 3.5	7	p6	[Steel] SKS3 Equivalent	Black Oxide	SKS3 Equiv.	3 ～ 6
-	1 Piece(s)	7 Day(s)	10	3 ～ 4.5	8	p6	[Steel] SKS3 Equivalent	Black Oxide	SKS3 Equiv.	3 ～ 10
-	1 Piece(s)	7 Day(s)	10	4 ～ 6.5	10	p6	[Steel] SKS3 Equivalent	Black Oxide	SKS3 Equiv.	3 ～ 15
-	1 Piece(s)	7 Day(s)	10	6 ～ 8.5	12	p6	[Steel] SKS3 Equivalent	Black Oxide	SKS3 Equiv.	3 ～ 15
-	1 Piece(s)	7 Day(s)	10	8 ～ 10.5	15	p6	[Steel] SKS3 Equivalent	Black Oxide	SKS3 Equiv.	5 ～ 35
-	1 Piece(s)	7 Day(s)	10	10 ～ 12.5	18	p6	[Steel] SKS3 Equivalent	Black Oxide	SKS3 Equiv.	5 ～ 35
-	1 Piece(s)	7 Day(s)	10	12 ～ 13.5	20	p6	[Steel] SKS3 Equivalent	Black Oxide	SKS3 Equiv.	5 ～ 35
-	1 Piece(s)	7 Day(s)	10	12 ～ 13.5	22	p6	[Steel] SKS3 Equivalent	Black Oxide	SKS3 Equiv.	5 ～ 35
-	1 Piece(s)	7 Day(s)	10	13 ～ 15.5	25	p6	[Steel] SKS3 Equivalent	Black Oxide	SKS3 Equiv.	5 ～ 35
-	1 Piece(s)	7 Day(s)	10	15 ～ 16.5	26	p6	[Steel] SKS3 Equivalent	Black Oxide	SKS3 Equiv.	5 ～ 35
-	1 Piece(s)	7 Day(s)	10	16 ～ 20.5	30	p6	[Steel] SKS3 Equivalent	Black Oxide	SKS3 Equiv.	5 ～ 50
-	1 Piece(s)	7 Day(s)	10	20 ～ 25	35	p6	[Steel] SKS3 Equivalent	Black Oxide	SKS3 Equiv.	5 ～ 50
-	1 Piece(s)	7 Day(s)	10	2.2 ～ 2.5	5	m6	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	SUS440C or 13Cr Stainless Steel	3 ～ 3.5
-	1 Piece(s)	7 Day(s)	10	2.2 ～ 3.5	7	m6	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	SUS440C or 13Cr Stainless Steel	3 ～ 6
-	1 Piece(s)	7 Day(s)	10	3 ～ 4.5	8	m6	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	SUS440C or 13Cr Stainless Steel	3 ～ 10
-	1 Piece(s)	7 Day(s)	10	4 ～ 6.5	10	m6	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	SUS440C or 13Cr Stainless Steel	3 ～ 15
-	1 Piece(s)	7 Day(s)	10	6 ～ 8.5	12	m6	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	SUS440C or 13Cr Stainless Steel	3 ～ 15
-	1 Piece(s)	7 Day(s)	10	8 ～ 10.5	15	m6	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	SUS440C or 13Cr Stainless Steel	5 ～ 35
-	1 Piece(s)	7 Day(s)	10	10 ～ 12.5	18	m6	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	SUS440C or 13Cr Stainless Steel	5 ～ 35
-	1 Piece(s)	7 Day(s)	10	12 ～ 13.5	20	m6	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	SUS440C or 13Cr Stainless Steel	5 ～ 35
-	1 Piece(s)	7 Day(s)	10	12 ～ 13.5	22	m6	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	SUS440C or 13Cr Stainless Steel	5 ～ 35
-	1 Piece(s)	7 Day(s)	10	13 ～ 15.5	25	m6	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	SUS440C or 13Cr Stainless Steel	5 ～ 35
-	1 Piece(s)	7 Day(s)	10	15 ～ 16.5	26	m6	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	SUS440C or 13Cr Stainless Steel	5 ～ 35
-	1 Piece(s)	7 Day(s)	10	16 ～ 20.5	30	m6	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	SUS440C or 13Cr Stainless Steel	5 ～ 50
-	1 Piece(s)	7 Day(s)	10	20 ～ 25	35	m6	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	SUS440C or 13Cr Stainless Steel	5 ～ 50
-	1 Piece(s)	7 Day(s)	10	2.2 ～ 2.5	5	p6	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	SUS440C or 13Cr Stainless Steel	3 ～ 3.5
-	1 Piece(s)	7 Day(s)	10	2.2 ～ 3.5	7	p6	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	SUS440C or 13Cr Stainless Steel	3 ～ 6
-	1 Piece(s)	7 Day(s)	10	3 ～ 4.5	8	p6	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	SUS440C or 13Cr Stainless Steel	3 ～ 10
-	1 Piece(s)	7 Day(s)	10	4 ～ 6.5	10	p6	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	SUS440C or 13Cr Stainless Steel	3 ～ 15
-	1 Piece(s)	7 Day(s)	10	6 ～ 8.5	12	p6	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	SUS440C or 13Cr Stainless Steel	3 ～ 15
-	1 Piece(s)	7 Day(s)	10	8 ～ 10.5	15	p6	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	SUS440C or 13Cr Stainless Steel	5 ～ 35
-	1 Piece(s)	7 Day(s)	10	10 ～ 12.5	18	p6	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	SUS440C or 13Cr Stainless Steel	5 ～ 35
-	1 Piece(s)	7 Day(s)	10	12 ～ 13.5	20	p6	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	SUS440C or 13Cr Stainless Steel	5 ～ 35

1
2
3
4
5
Next >>

Product TOP

Basic Information

Basic Shape	Aluminum	Environmentally Friendly	RoHS compliant (10 substances)	I.D. Shape	Circular
Properties / applications	Not Applicable	Fixing Support	Not Provided	Type	Bushing

Configure

267 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Inner Diameter(mm)
[2-29/0.01mm Unit(s)]
Clear
Outer Diameter(mm)
5

7

8

9

10

11

12

13

14

15

17

18

20

22

25

26

30

35
Clear
O.D. Tolerance
p6

m6
Clear
Material
- Steel
  - SKS3 Equivalent
- Stainless Steel
  - SUS304
  - SUS440C or 13Cr stainless
Clear
Surface Treatment
- Not Provided
- Electroless Nickel Plating
- Black Oxide
Clear
Material Details
- SKS3 Equiv.
- SUS304
- SUS440C or 13Cr Stainless Steel
Clear
L(mm)
[3-50/0.1mm Unit(s)]
Clear
type
- JBHF
- JBHFB
- JBHFBP
- JBHFC
- JBHFCP
- JBHFM
- JBHFMP
- JBHFP
- JBHFS
- JBHFSP
- JBHUF
- JBHUFB
- JBHUFBP
- JBHUFC
- JBHUFCP
- JBHUFM
- JBHUFMP
- JBHUFP
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

7 Day(s) or Less

8 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Additional Products in this Category

Complementary Products

[High Precision] X-Axis Cross Roller - Micrometer Head
MISUMI Standard Price : MYR 804.71- Days to Ship : 6 Day(s) or more
Angles - Resin
MISUMI Days to Ship : -
Sheet Metal Bracket For 5 Series (Slot Width 6mm) Aluminum Frames - Bent-Shaped
MISUMI Standard Price : MYR 5.78- Days to Ship : 1 Day(s) or more

Customers Who Viewed This Item Also Viewed

Bushings for Locating Pins - Shouldered, Standard / Thin Wall
MISUMI

Standard Price : MYR 20.01-

Days to Ship : 1 Day(s) or more
Bushings for Locating Pins - Configurable, Straight, Standard / Thin Wall
MISUMI

Days to Ship : 7 Day(s) or more
Bushings for Locating Pins - Straight, Standard / Thin Wall
MISUMI

Standard Price : MYR 11.58-

Days to Ship : 1 Day(s) or more
Bushings for Locating Pins - Ceramic Abrasion Data - Shouldered Type
MISUMI

Standard Price : MYR 19.26-

Days to Ship : 1 Day(s) or more
Bushings for Locating Pins - Oval - Shouldered (Dowel Pin)
MISUMI

Days to Ship : 9 Day(s)
Bushings for Locating Pins - Notched, Retaining
MISUMI

Days to Ship : 7 Day(s)
Bushings for Locating Pins - Ceramic Abrasion Data - Straight Type
MISUMI

Standard Price : MYR 16.97-

Days to Ship : 1 Day(s) or more
Locating Pins - Small Head, Round Tapered - Press Fit
MISUMI

Days to Ship : 3 Day(s) or more
Bushings for Locating Pins-High Hardness Stainless Steel
MISUMI

Days to Ship : 6 Day(s) or more
Bushings for Locating Pins - Compact Flange
MISUMI

Days to Ship : 1 Day(s) or more
Bushings for Locating Pins - Shouldered, Retaining
MISUMI

Days to Ship : 7 Day(s)
Locating Pins - Large Head, Tapered - Threaded, Hex Socket
MISUMI

Days to Ship : 3 Day(s) or more

back next

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations): Tel：(60) 3 7890 6399; 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday); Technical Inquiry

How can we improve?

Bushings for Locating Pins - Configurable, Shouldered, Standard / Thin Wall

(i)Caution

Specification Table

Alterations

Part Number

Basic Information

Configure

Specification/Dimensions

Inner Diameter(mm)

Outer Diameter(mm)

O.D. Tolerance

Material

Surface Treatment

Material Details

L(mm)

type

CAD

Days to Ship

Specify Alterations

Additional Products in this Category

Complementary Products

Customers Who Viewed This Item Also Viewed

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm