[Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Bushings for Locating Pins - Configurable, Straight, Standard / Thin Wall (Part Numbers)

MISUMI

This is a shoulder type bushing for positioning pins. Custom dimensions are available.

Part Number

Configured Part Number is shown.

■Standard

[ ! ]

■Thin-wall type

[ ! ]

■Standard

[M] Material	[S] Surface Treatment	[H] Hardness	Type
[M] Material	[S] Surface Treatment	[H] Hardness	p6	m6	h7
SKS3 Equivalent	—	56 to 60HRC	JBAFP	JBAF	JBAFH
SKS3 Equivalent	Black Oxide	56 to 60HRC	JBAFBP	JBAFB	JBAFBH
SKS3 Equivalent	Electroless Nickel Plating	56 to 60HRC	JBAFMP	JBAFM	JBAFMH
SUS304	—	—	JBAFSP	JBAFS	JBAFSH
SUS440C or 13Cr Stainless Steel	—	50 to 55HRC	JBAFCP	JBAFC	JBAFCH

[!] For hole machining, please note that inner diameter shrinkage of p6 Type is more than that of m6 Type.
■Thin-wall type

[M] Material	[S] Surface Treatment	[H] Hardness	Type
[M] Material	[S] Surface Treatment	[H] Hardness	p6	m6	h7
SKS3 Equivalent	—	56 to 60HRC	JBAUFP	JBAUF	JBAUFH
SKS3 Equivalent	Black Oxide	56 to 60HRC	JBAUFBP	JBAUFB	JBAUFBH
SKS3 Equivalent	Electroless Nickel Plating	56 to 60HRC	JBAUFMP	JBAUFM	JBAUFMH
SUS440C or 13Cr Stainless Steel	—	50 to 55HRC	JBAUFCP	JBAUFC	JBAUFCH

[!] For hole machining, please note that inner diameter shrinkage of p6 Type is more than that of m6 Type.

Specification Table

Part Number	—	P	—	L
JBAF10 JBAUFC10	— —	P4.00 P8.00	— —	L8.5 L15.0

■Standard

Part Number					P 0.01 mm Increments	L 0.1 mm Increments	Thickness (N)	R
Type	D	D Tolerance
Type	D	p6	m6	h7
(p6) JBAFP JBAFBP JBAFMP JBAFSP JBAFCP (m6) JBAF JBAFB JBAFM JBAFS JBAFC (h7) JBAFH JBAFBH JBAFMH JBAFSH JBAFCH	5	+0.020 +0.012	+0.012 +0.004	0 －0.012	2.00 to 2.50	5.0 to 6.0	1.25 to 1.50	0.8
	6	+0.020 +0.012	+0.012 +0.004	0 －0.012	2.00 to 3.00	5.0 to 8.0	1.50 to 2.00	0.8
	7	+0.024 +0.015	+0.015 +0.006	0 －0.015	2.00 to 3.50	5.0 to 8.0	1.75 to 2.50	0.8
	8				3.00 to 4.50	5.0 to 13.0	1.75 to 2.50	1.0
	9				3.00 to 4.50	5.0 to 20.0	2.25 to 3.00
	10				4.00 to 6.50	5.0 to 20.0	1.75 to 3.00
	11	+0.029 +0.018	+0.018 +0.007	0 －0.018	6.00 to 8.00	5.0 to 20.0	1.50 to 2.50	1.0
	12				6.00 to 8.50		1.75 to 3.00	2.0
	13				6.00 to 8.50		2.25 to 3.50
	14				6.00 to 9.00		2.50 to 4.00
	15				8.00 to 10.50	5.0 to 40.0	2.25 to 3.50	2.0
	16				8.00 to 10.50		2.75 to 4.00	2.0
	17				9.00 to 11.50		3.25 to 4.00	2.0
	18				10.00 to 12.50		2.75 to 4.00	2.0
	19	+0.035 +0.022	+0.021 +0.008	0 －0.021	10.00 to 12.50	5.0 to 40.0	3.25 to 4.50	2.0
	20				12.00 to 13.50		3.25 to 4.00
	21				12.00 to 13.50		3.75 to 4.50
	22				12.00 to 13.50		4.25 to 5.00
	23				13.00 to 13.50		4.75 to 5.00
	24				13.00 to 13.50		5.25 to 5.50
	25				13.00 to 15.50		4.75 to 6.00
	26				15.00 to 16.50		4.75 to 5.50
	27				15.00 to 17.50		4.75 to 6.00
	28				15.00 to 18.00		5.00 to 6.50
	29				16.00 to 19.00		5.00 to 6.50
	30				16.00 to 20.50	5.0 to 60.0	4.75 to 7.00	3.0
	31	+0.042 +0.026	+0.025 +0.009	0 －0.025	16.00 to 20.50	5.0 to 60.0	5.25 to 7.50	3.0
	32				17.00 to 22.00		5.00 to 7.50
	33				18.00 to 23.00		5.00 to 7.50
	34				19.00 to 24.00		5.00 to 7.50
	35				20.00 to 25.00		5.00 to 7.50
[!] L ≤ P × 2.5 when P ≤ 3.59, L ≤ P × 3.0 when P ≥ 3.60 [!] For (D-P)/2≤2, R≤2.

■Thin-wall type

Part Number					P 0.01 mm Increments	L 0.1 mm Increments	Thickness (N)	R
TYPE	D	D Tolerance
TYPE	D	p6	m6	h7
(p6) JBAUFP JBAUFBP JBAUFMP JBAUFCP (m6) JBAUF JBAUFB JBAUFM JBAUFC (h7) JBAUFH JBAUFBH JBAUFMH JBAUFCH	5	+0.020 +0.012	+0.012 +0.004	0 －0.012	2.20 to 3.00	5.0 to 7.5	1.00 to 1.40	0.5 or Less
	6	+0.020 +0.012	+0.012 +0.004	0 －0.012	3.00 to 4.00	5.0 to 8.0	1.00 to 1.50	0.5 or Less
	7	+0.024 +0.015	+0.015 +0.006	0 －0.015	3.51 to 5.00	5.0 to 8.0	1.00 to 1.74	0.5
	8				4.51 to 6.00	5.0 to 13.0	1.00 to 1.74
	9				4.51 to 7.00	5.0 to 20.0	1.00 to 2.24
	10				6.51 to 8.00	5.0 to 20.0	1.00 to 1.74
	11	+0.029 +0.018	+0.018 +0.007	0 －0.018	8.00 to 9.00	5.0 to 20.0	1.00 to 1.50	0.5
	12				8.51 to 9.00		1.50 to 1.74
	13				8.51 to 10.00		1.50 to 2.24
	14				9.00 to 11.00		1.50 to 2.50
	15				10.51 to 12.00	5.0 to 40.0	1.50 to 2.24	0.5
	16				10.51 to 12.50		1.75 to 2.75	1.0
	17				10.51 to 13.00		2.00 to 3.24
	18				10.51 to 14.00		2.00 to 2.74
	19	+0.035 +0.022	+0.021 +0.008	0 －0.021	12.51 to 14.00	5.0 to 40.0	2.50 to 3.25	1.0
	20				13.51 to 15.00		2.50 to 3.24
	21				13.51 to 15.00		3.00 to 3.75
	22				13.51 to 17.00		2.50 to 4.24
	23				13.51 to 18.00		2.50 to 4.75
	24				13.51 to 19.00		2.50 to 5.25
	25				15.51 to 19.00		3.00 to 4.74
	26				16.51 to 20.00		3.00 to 4.74
	27				17.51 to 21.00		3.00 to 4.75
	28				18.01 to 22.00		3.00 to 5.00
	29				19.01 to 23.00		3.00 to 5.00
	30				20.51 to 24.00	5.0 to 40.0	3.00 to 4.74	1.5
	31	+0.042 +0.026	+0.025 +0.009	0 －0.025	20.51 to 24.00	5.0 to 40.0	3.50 to 5.24	1.5
	32				22.01 to 25.00		3.50 to 5.00
	33				23.01 to 26.00		3.50 to 5.00
	34				24.01 to 27.00		3.50 to 5.00
	35				25.01 to 29.00	5.0 to 60.0	3.00 to 4.99
[!] L ≤ P × 2.5 when P ≤ 3.59, L ≤ P × 3.0 when P ≥ 3.60 [!] For (D-P)/2≤2, R≤2.

Part Number	—	P	—	L	—	(RS)
JBAFP20	—	P12.00	—	L20.0	—	RS

Alteration	Code	Spec.
Adhesive Groove Machining When L ≤ 13.0 When L > 13.0	RS	Adds an adhesive groove. [ ! ] Number of O.D. Grooves ·When L ≤ 13.0, Adds two grooves ·When L > 13.0, Adds three grooves Ordering Code RS [ ! ] When D ≤ 13, D-P ≥ 3 When D ≥ 14, D-P ≥ 4 [ NG ] Not applicable when L < 9.0

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 60; 90

Part Number

Part Number	Minimum order quantity	Volume Discount	Days to Ship	RoHS	Inner Diameter (mm)	Outer Diameter (mm)	O.D. Tolerance	Material	Surface Treatment	Material Details	L (mm)

Product TOP

Basic Information

Basic Shape	Straight	Environmentally Friendly	RoHS compliant (10 substances)	I.D. Shape	Circular
Properties / applications	Not Applicable	Fixing Support	Not Provided	Type	Bushing

Configure

268 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Inner Diameter(mm)
[2-29/0.01mm Unit(s)]
Clear
Outer Diameter(mm)
5

7

8

9

10

11

12

13

14

15

17

18

20

22

25

26

30

35
Clear
O.D. Tolerance
p6

m6

h7
Clear
Material
- Steel
  - SKS3 Equivalent
- Stainless Steel
  - SUS304
  - SUS440C or 13Cr stainless
Clear
Surface Treatment
- Not Provided
- Electroless Nickel Plating
- Black Oxide
Clear
Material Details
- SKS3 Equiv.
- SUS304
- SUS440C or 13Cr Stainless Steel
Clear
L(mm)
[5-60/0.1mm Unit(s)]
Clear
type
- JBAF
- JBAFB
- JBAFBP
- JBAFC
- JBAFCP
- JBAFH
- JBAFM
- JBAFMH
- JBAFMP
- JBAFP
- JBAFS
- JBAFSP
- JBAUF
- JBAUFB
- JBAUFBP
- JBAUFC
- JBAUFCP
- JBAUFM
- JBAUFMP
- JBAUFP
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

7 Day(s) or Less

8 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Additional Products in this Category

Complementary Products

[High Precision] X-Axis Cross Roller - Micrometer Head
MISUMI Standard Price : MYR 804.71- Days to Ship : 6 Day(s) or more
Angles - Resin
MISUMI Days to Ship : -
Sheet Metal Bracket For 5 Series (Slot Width 6mm) Aluminum Frames - Bent-Shaped
MISUMI Standard Price : MYR 5.78- Days to Ship : 1 Day(s) or more

Customers Who Viewed This Item Also Viewed

Bushings for Locating Pins - Straight, Standard / Thin Wall
MISUMI

Standard Price : MYR 11.58-

Days to Ship : 1 Day(s) or more
Bushings for Locating Pins - Ceramic Abrasion Data - Straight Type
MISUMI

Standard Price : MYR 16.97-

Days to Ship : 1 Day(s) or more
Bushings for Locating Pins-High Hardness Stainless Steel
MISUMI

Days to Ship : 6 Day(s) or more
Bushings for Locating Pins - Configurable, Shouldered, Standard / Thin Wall
MISUMI

Days to Ship : 7 Day(s) or more
Bushings for Locating Pins - Shouldered, Standard / Thin Wall
MISUMI

Standard Price : MYR 20.01-

Days to Ship : 1 Day(s) or more
Locating Pins - Large Head, Tapered (Press Fit)
MISUMI

Days to Ship : 1 Day(s) or more
Locating Pins - Tip Shape Selectable (Threaded)
MISUMI

Days to Ship : 3 Day(s) or more
Locating Pins - Small Head, Tapered (Press Fit)
MISUMI

Days to Ship : 1 Day(s) or more
Bushings for Locating Pins - Oval - Shouldered (Dowel Pin)
MISUMI

Days to Ship : 9 Day(s)
Locating Pins - Sphere Large Head (Press Fit)
MISUMI

Days to Ship : 2 Day(s) or more
Locating Pins - Small Head, Round Tapered - Press Fit
MISUMI

Days to Ship : 3 Day(s) or more
Bushings for Locating Pins - Retaining
MISUMI

Days to Ship : 7 Day(s)

back next

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations): Tel：(60) 3 7890 6399; 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday); Technical Inquiry

How can we improve?

Bushings for Locating Pins - Configurable, Straight, Standard / Thin Wall (Part Numbers)

Specification Table

Part Number

Basic Information

Configure

Specification/Dimensions

Inner Diameter(mm)

Outer Diameter(mm)

O.D. Tolerance

Material

Surface Treatment

Material Details

L(mm)

type

CAD

Days to Ship

Specify Alterations

Additional Products in this Category

Complementary Products

Customers Who Viewed This Item Also Viewed

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm