[Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Height Adjusting Pins - Flat, Tip Set Screw - Threaded (Part Numbers)

MISUMI

With Wrench Flats. Locating is possible by attaching a pin on the tip or by Flat Tip adjustment.

Part Number

Configured Part Number is shown.

Support Pins - Flat, Tip Set Screw - Threaded:Related Image

[ ! ]The range of L dimension should be within 0.02 for same orders.

[ M ]Material	[ S ]Surface Treatment	[ H ]Hardness	Flat		Tip Set Screw Type
[ M ]Material	[ S ]Surface Treatment	[ H ]Hardness	Threaded	Threaded with Pilot	Threaded
①S45C Equivalent	Black Oxide	-	STPAB	STPDB	SPFAB
②S45C Equivalent	Hard Chrome Plating	Plating Hardness: 750HV ~	STPAR	STPDR	-
③S45C Equivalent	Black Oxide	Treated Hardness: 45 ~ 50HRC	STPAHB	STPDHB	-
④S45C Equivalent	Hard Chrome Plating	Treated Hardness: 45 ~ 50HRC / Plating Hardness: 750HV ~	STPAHR	STPDHR	-
⑤SUS304	-	-	STPASU	STPDSU	-
⑥SUS440C or 13Cr stainless	-	Treated Hardness: 50 ~ 55HRC	STPAC	STPDC	-

[ ! ]SUS304 may not be polished.

Specifications

Part Number	-	L	-	P	-	B
STPAB10 SPFAB12	- -	L20.03 L20.01	-	P6	-	B5	(Flat) (Tip Set Screw)

◆Threaded
Recommended Tightening Torque (Reference)

M (Coarse)	Tightening Torque N • cm
M3	98
M4	225
M5	461
M6	784
M8	1911
M10	3783
M12	6605
M16	16366
M20	32928

[ ! ]The tightening torque (ref. value) for hardened products is strength class 8.8. (See technical data on >> P.2297.) Not applicable when using locking materials or lock washers.

■Flat

Part Number			L 0.01mm Increment	M (Coarse)	d	M₃ (Coarse)	F	W	ℓ
Type		D	L 0.01mm Increment	M (Coarse)	d	M₃ (Coarse)	F	W	ℓ
Threaded STPAB STPAR STPAHB STPAHR STPASU STPAC	Threaded with Pilot STPDB STPDR STPDHB STPDHR STPDSU STPDC	6	10.00~50.00	M3	3	M3	1.5	5	8
		8	10.00~50.00	M5	5	M5	2	7	8
		10	20.00~80.00	M5	6	M6	3	8	8
		12		M5	8	M8	4	10	10
		15		M8	10	M10	5	13	10
		20		M8	12	M12	5	17	10

■Tip Set Screw

Part Number		L 0.01mm Increment	P Selection	B 0.5mm Increment	d	F	M₁ (Coarse)	W	ℓ	A	N (Coarse)
Type	D	L 0.01mm Increment	P Selection	B 0.5mm Increment	d	F	M₁ (Coarse)	W	ℓ	A	N (Coarse)
Threaded SPFAB	12	20.00~80.00	6	4.0~6.0	8	4	M8	10	10	10	M3
	15	20.00~80.00	8	5.0~10.0	10	5	M10	13	10	15	M4
	20	25.00~80.00	10 12	5.0~15.0	12	5	M12	17	10	20	M4
	25	30.00~80.00	12 16	5.0~19.0	16	5	M16	20	12	24	M4
	30	35.00~80.00	16 20	5.0~23.0	20	6	M20	24	18	28	M4

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 60; 90

Part Number
SPFAB12-L[20-80/0.01]-P6-B[4-6/0.5]
SPFAB15-L[20-80/0.01]-P8-B[5-10/0.5]
SPFAB20-L[20-80/0.01]-P[10,12]-B[5-15/0.5]
SPFAB25-L[30-80/0.01]-P[12,16]-B[5-19/0.5]
SPFAB30-L[30-80/0.01]-P[16,20]-B[5-23/0.5]
STPAB6-L[10-50/0.01]
STPAB8-L[10-50/0.01]
STPAB10-L[20-80/0.01]
STPAB12-L[20-80/0.01]
STPAB15-L[20-80/0.01]
STPAB20-L[20-80/0.01]
STPAC6-L[10-50/0.01]
STPAC8-L[10-50/0.01]
STPAC10-L[20-80/0.01]
STPAC12-L[20-80/0.01]
STPAC15-L[20-80/0.01]
STPAC20-L[20-80/0.01]
STPAHB6-L[10-50/0.01]
STPAHB8-L[10-50/0.01]
STPAHB10-L[20-80/0.01]
STPAHB12-L[20-80/0.01]
STPAHB15-L[20-80/0.01]
STPAHB20-L[20-80/0.01]
STPAHR6-L[10-50/0.01]
STPAHR8-L[10-50/0.01]
STPAHR10-L[20-80/0.01]
STPAHR12-L[20-80/0.01]
STPAHR15-L[20-80/0.01]
STPAHR20-L[20-80/0.01]
STPAR6-L[10-50/0.01]
STPAR8-L[10-50/0.01]
STPAR10-L[20-80/0.01]
STPAR12-L[20-80/0.01]
STPAR15-L[20-80/0.01]
STPAR20-L[20-80/0.01]
STPASU6-L[10-50/0.01]
STPASU8-L[10-50/0.01]
STPASU10-L[20-80/0.01]
STPASU12-L[20-80/0.01]
STPASU15-L[20-80/0.01]
STPASU20-L[20-80/0.01]
STPDB6-L[10-50/0.01]
STPDB8-L[10-50/0.01]
STPDB10-L[20-80/0.01]
STPDB12-L[20-80/0.01]
STPDB15-L[20-80/0.01]
STPDB20-L[20-80/0.01]
STPDC6-L[10-50/0.01]
STPDC8-L[10-50/0.01]
STPDC10-L[20-80/0.01]
STPDC12-L[20-80/0.01]
STPDC15-L[20-80/0.01]
STPDC20-L[20-80/0.01]
STPDHB6-L[10-50/0.01]
STPDHB8-L[10-50/0.01]
STPDHB10-L[20-80/0.01]
STPDHB12-L[20-80/0.01]
STPDHB15-L[20-80/0.01]
STPDHB20-L[20-80/0.01]
STPDHR6-L[10-50/0.01]
STPDHR8-L[10-50/0.01]
STPDHR10-L[20-80/0.01]
STPDHR12-L[20-80/0.01]
STPDHR15-L[20-80/0.01]
STPDHR20-L[20-80/0.01]
STPDR6-L[10-50/0.01]
STPDR8-L[10-50/0.01]
STPDR10-L[20-80/0.01]
STPDR12-L[20-80/0.01]
STPDR15-L[20-80/0.01]
STPDR20-L[20-80/0.01]
STPDSU6-L[10-50/0.01]
STPDSU8-L[10-50/0.01]
STPDSU10-L[20-80/0.01]
STPDSU12-L[20-80/0.01]
STPDSU15-L[20-80/0.01]
STPDSU20-L[20-80/0.01]

Standard Unit Price	Minimum order quantity	Days to Ship	RoHS	Tip Shape	Material	Surface Treatment	Hardening	Hardness	Outer Dia. D (mm)	B (mm)	L (mm)	P (mm)
-	1 Piece(s)	9 Day(s)	10	Tip Set Screw	[Steel] S45C Equivalent	Black Oxide	Not Provided	Not Provided	12	4 ～ 6	20 ～ 80	6
-	1 Piece(s)	9 Day(s)	10	Tip Set Screw	[Steel] S45C Equivalent	Black Oxide	Not Provided	Not Provided	15	5 ～ 10	20 ～ 80	8
-	1 Piece(s)	9 Day(s)	10	Tip Set Screw	[Steel] S45C Equivalent	Black Oxide	Not Provided	Not Provided	20	5 ～ 15	20 ～ 80	10 ～ 12
-	1 Piece(s)	9 Day(s)	10	Tip Set Screw	[Steel] S45C Equivalent	Black Oxide	Not Provided	Not Provided	25	5 ～ 19	30 ～ 80	12 ～ 16
-	1 Piece(s)	9 Day(s)	10	Tip Set Screw	[Steel] S45C Equivalent	Black Oxide	Not Provided	Not Provided	30	5 ～ 23	30 ～ 80	16 ～ 20
-	1 Piece(s)	7 Day(s)	10	Flat	[Steel] S45C Equivalent	Black Oxide	Not Provided	Not Provided	6	-	10 ～ 50	-
-	1 Piece(s)	7 Day(s)	10	Flat	[Steel] S45C Equivalent	Black Oxide	Not Provided	Not Provided	8	-	10 ～ 50	-
-	1 Piece(s)	7 Day(s)	10	Flat	[Steel] S45C Equivalent	Black Oxide	Not Provided	Not Provided	10	-	20 ～ 80	-
-	1 Piece(s)	7 Day(s)	10	Flat	[Steel] S45C Equivalent	Black Oxide	Not Provided	Not Provided	12	-	20 ～ 80	-
-	1 Piece(s)	7 Day(s)	10	Flat	[Steel] S45C Equivalent	Black Oxide	Not Provided	Not Provided	15	-	20 ～ 80	-
-	1 Piece(s)	7 Day(s)	10	Flat	[Steel] S45C Equivalent	Black Oxide	Not Provided	Not Provided	20	-	20 ～ 80	-
-	1 Piece(s)	7 Day(s)	10	Flat	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	Provided	Treated Hardness: 50 ~ 55HRC	6	-	10 ～ 50	-
-	1 Piece(s)	7 Day(s)	10	Flat	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	Provided	Treated Hardness: 50 ~ 55HRC	8	-	10 ～ 50	-
-	1 Piece(s)	7 Day(s)	10	Flat	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	Provided	Treated Hardness: 50 ~ 55HRC	10	-	20 ～ 80	-
-	1 Piece(s)	7 Day(s)	10	Flat	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	Provided	Treated Hardness: 50 ~ 55HRC	12	-	20 ～ 80	-
-	1 Piece(s)	7 Day(s)	10	Flat	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	Provided	Treated Hardness: 50 ~ 55HRC	15	-	20 ～ 80	-
-	1 Piece(s)	7 Day(s)	10	Flat	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	Provided	Treated Hardness: 50 ~ 55HRC	20	-	20 ～ 80	-
-	1 Piece(s)	7 Day(s)	10	Flat	[Steel] S45C Equivalent	Black Oxide	Provided	Treated Hardness: 45 ~ 50HRC	6	-	10 ～ 50	-
-	1 Piece(s)	7 Day(s)	10	Flat	[Steel] S45C Equivalent	Black Oxide	Provided	Treated Hardness: 45 ~ 50HRC	8	-	10 ～ 50	-
-	1 Piece(s)	7 Day(s)	10	Flat	[Steel] S45C Equivalent	Black Oxide	Provided	Treated Hardness: 45 ~ 50HRC	10	-	20 ～ 80	-
-	1 Piece(s)	7 Day(s)	10	Flat	[Steel] S45C Equivalent	Black Oxide	Provided	Treated Hardness: 45 ~ 50HRC	12	-	20 ～ 80	-
-	1 Piece(s)	7 Day(s)	10	Flat	[Steel] S45C Equivalent	Black Oxide	Provided	Treated Hardness: 45 ~ 50HRC	15	-	20 ～ 80	-
-	1 Piece(s)	7 Day(s)	10	Flat	[Steel] S45C Equivalent	Black Oxide	Provided	Treated Hardness: 45 ~ 50HRC	20	-	20 ～ 80	-
-	1 Piece(s)	7 Day(s)	10	Flat	[Steel] S45C Equivalent	Hard Chrome Plating	Provided	Treated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~	6	-	10 ～ 50	-
-	1 Piece(s)	7 Day(s)	10	Flat	[Steel] S45C Equivalent	Hard Chrome Plating	Provided	Treated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~	8	-	10 ～ 50	-
-	1 Piece(s)	7 Day(s)	10	Flat	[Steel] S45C Equivalent	Hard Chrome Plating	Provided	Treated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~	10	-	20 ～ 80	-
-	1 Piece(s)	7 Day(s)	10	Flat	[Steel] S45C Equivalent	Hard Chrome Plating	Provided	Treated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~	12	-	20 ～ 80	-
-	1 Piece(s)	7 Day(s)	10	Flat	[Steel] S45C Equivalent	Hard Chrome Plating	Provided	Treated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~	15	-	20 ～ 80	-
-	1 Piece(s)	7 Day(s)	10	Flat	[Steel] S45C Equivalent	Hard Chrome Plating	Provided	Treated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~	20	-	20 ～ 80	-
-	1 Piece(s)	7 Day(s)	10	Flat	[Steel] S45C Equivalent	Hard Chrome Plating	Provided	Plating Hardness: 750HV	6	-	10 ～ 50	-
-	1 Piece(s)	7 Day(s)	10	Flat	[Steel] S45C Equivalent	Hard Chrome Plating	Provided	Plating Hardness: 750HV	8	-	10 ～ 50	-
-	1 Piece(s)	7 Day(s)	10	Flat	[Steel] S45C Equivalent	Hard Chrome Plating	Provided	Plating Hardness: 750HV	10	-	20 ～ 80	-
-	1 Piece(s)	7 Day(s)	10	Flat	[Steel] S45C Equivalent	Hard Chrome Plating	Provided	Plating Hardness: 750HV	12	-	20 ～ 80	-
-	1 Piece(s)	7 Day(s)	10	Flat	[Steel] S45C Equivalent	Hard Chrome Plating	Provided	Plating Hardness: 750HV	15	-	20 ～ 80	-
-	1 Piece(s)	7 Day(s)	10	Flat	[Steel] S45C Equivalent	Hard Chrome Plating	Provided	Plating Hardness: 750HV	20	-	20 ～ 80	-
-	1 Piece(s)	7 Day(s)	10	Flat	[Stainless Steel] SUS304	Not Provided	Not Provided	Not Provided	6	-	10 ～ 50	-
-	1 Piece(s)	7 Day(s)	10	Flat	[Stainless Steel] SUS304	Not Provided	Not Provided	Not Provided	8	-	10 ～ 50	-
-	1 Piece(s)	7 Day(s)	10	Flat	[Stainless Steel] SUS304	Not Provided	Not Provided	Not Provided	10	-	20 ～ 80	-
-	1 Piece(s)	7 Day(s)	10	Flat	[Stainless Steel] SUS304	Not Provided	Not Provided	Not Provided	12	-	20 ～ 80	-
-	1 Piece(s)	7 Day(s)	10	Flat	[Stainless Steel] SUS304	Not Provided	Not Provided	Not Provided	15	-	20 ～ 80	-
-	1 Piece(s)	7 Day(s)	10	Flat	[Stainless Steel] SUS304	Not Provided	Not Provided	Not Provided	20	-	20 ～ 80	-
-	1 Piece(s)	7 Day(s)	10	Flat	[Steel] S45C Equivalent	Black Oxide	Not Provided	Not Provided	6	-	10 ～ 50	-
-	1 Piece(s)	7 Day(s)	10	Flat	[Steel] S45C Equivalent	Black Oxide	Not Provided	Not Provided	8	-	10 ～ 50	-
-	1 Piece(s)	7 Day(s)	10	Flat	[Steel] S45C Equivalent	Black Oxide	Not Provided	Not Provided	10	-	20 ～ 80	-
-	1 Piece(s)	7 Day(s)	10	Flat	[Steel] S45C Equivalent	Black Oxide	Not Provided	Not Provided	12	-	20 ～ 80	-
-	1 Piece(s)	7 Day(s)	10	Flat	[Steel] S45C Equivalent	Black Oxide	Not Provided	Not Provided	15	-	20 ～ 80	-
-	1 Piece(s)	7 Day(s)	10	Flat	[Steel] S45C Equivalent	Black Oxide	Not Provided	Not Provided	20	-	20 ～ 80	-
-	1 Piece(s)	7 Day(s)	10	Flat	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	Provided	Treated Hardness: 50 ~ 55HRC	6	-	10 ～ 50	-
-	1 Piece(s)	7 Day(s)	10	Flat	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	Provided	Treated Hardness: 50 ~ 55HRC	8	-	10 ～ 50	-
-	1 Piece(s)	7 Day(s)	10	Flat	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	Provided	Treated Hardness: 50 ~ 55HRC	10	-	20 ～ 80	-
-	1 Piece(s)	7 Day(s)	10	Flat	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	Provided	Treated Hardness: 50 ~ 55HRC	12	-	20 ～ 80	-
-	1 Piece(s)	7 Day(s)	10	Flat	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	Provided	Treated Hardness: 50 ~ 55HRC	15	-	20 ～ 80	-
-	1 Piece(s)	7 Day(s)	10	Flat	[Stainless Steel] SUS440C or 13Cr stainless	Not Provided	Provided	Treated Hardness: 50 ~ 55HRC	20	-	20 ～ 80	-
-	1 Piece(s)	7 Day(s)	10	Flat	[Steel] S45C Equivalent	Black Oxide	Provided	Treated Hardness: 45 ~ 50HRC	6	-	10 ～ 50	-
-	1 Piece(s)	7 Day(s)	10	Flat	[Steel] S45C Equivalent	Black Oxide	Provided	Treated Hardness: 45 ~ 50HRC	8	-	10 ～ 50	-
-	1 Piece(s)	7 Day(s)	10	Flat	[Steel] S45C Equivalent	Black Oxide	Provided	Treated Hardness: 45 ~ 50HRC	10	-	20 ～ 80	-
-	1 Piece(s)	7 Day(s)	10	Flat	[Steel] S45C Equivalent	Black Oxide	Provided	Treated Hardness: 45 ~ 50HRC	12	-	20 ～ 80	-
-	1 Piece(s)	7 Day(s)	10	Flat	[Steel] S45C Equivalent	Black Oxide	Provided	Treated Hardness: 45 ~ 50HRC	15	-	20 ～ 80	-
-	1 Piece(s)	7 Day(s)	10	Flat	[Steel] S45C Equivalent	Black Oxide	Provided	Treated Hardness: 45 ~ 50HRC	20	-	20 ～ 80	-
-	1 Piece(s)	7 Day(s)	10	Flat	[Steel] S45C Equivalent	Hard Chrome Plating	Provided	Treated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~	6	-	10 ～ 50	-
-	1 Piece(s)	7 Day(s)	10	Flat	[Steel] S45C Equivalent	Hard Chrome Plating	Provided	Treated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~	8	-	10 ～ 50	-
-	1 Piece(s)	7 Day(s)	10	Flat	[Steel] S45C Equivalent	Hard Chrome Plating	Provided	Treated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~	10	-	20 ～ 80	-
-	1 Piece(s)	7 Day(s)	10	Flat	[Steel] S45C Equivalent	Hard Chrome Plating	Provided	Treated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~	12	-	20 ～ 80	-
-	1 Piece(s)	7 Day(s)	10	Flat	[Steel] S45C Equivalent	Hard Chrome Plating	Provided	Treated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~	15	-	20 ～ 80	-
-	1 Piece(s)	7 Day(s)	10	Flat	[Steel] S45C Equivalent	Hard Chrome Plating	Provided	Treated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~	20	-	20 ～ 80	-
-	1 Piece(s)	7 Day(s)	10	Flat	[Steel] S45C Equivalent	Hard Chrome Plating	Provided	Plating Hardness: 750HV	6	-	10 ～ 50	-
-	1 Piece(s)	7 Day(s)	10	Flat	[Steel] S45C Equivalent	Hard Chrome Plating	Provided	Plating Hardness: 750HV	8	-	10 ～ 50	-
-	1 Piece(s)	7 Day(s)	10	Flat	[Steel] S45C Equivalent	Hard Chrome Plating	Provided	Plating Hardness: 750HV	10	-	20 ～ 80	-
-	1 Piece(s)	7 Day(s)	10	Flat	[Steel] S45C Equivalent	Hard Chrome Plating	Provided	Plating Hardness: 750HV	12	-	20 ～ 80	-
-	1 Piece(s)	7 Day(s)	10	Flat	[Steel] S45C Equivalent	Hard Chrome Plating	Provided	Plating Hardness: 750HV	15	-	20 ～ 80	-
-	1 Piece(s)	7 Day(s)	10	Flat	[Steel] S45C Equivalent	Hard Chrome Plating	Provided	Plating Hardness: 750HV	20	-	20 ～ 80	-
-	1 Piece(s)	7 Day(s)	10	Flat	[Stainless Steel] SUS304	Not Provided	Not Provided	Not Provided	6	-	10 ～ 50	-
-	1 Piece(s)	7 Day(s)	10	Flat	[Stainless Steel] SUS304	Not Provided	Not Provided	Not Provided	8	-	10 ～ 50	-
-	1 Piece(s)	7 Day(s)	10	Flat	[Stainless Steel] SUS304	Not Provided	Not Provided	Not Provided	10	-	20 ～ 80	-
-	1 Piece(s)	7 Day(s)	10	Flat	[Stainless Steel] SUS304	Not Provided	Not Provided	Not Provided	12	-	20 ～ 80	-
-	1 Piece(s)	7 Day(s)	10	Flat	[Stainless Steel] SUS304	Not Provided	Not Provided	Not Provided	15	-	20 ～ 80	-
-	1 Piece(s)	7 Day(s)	10	Flat	[Stainless Steel] SUS304	Not Provided	Not Provided	Not Provided	20	-	20 ～ 80	-

Product TOP

Basic Information

Shape	Support Pin	Mounting Type	Threaded	Height Tolerance	0/+0.05

Configure

77 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Tip Shape
- Flat
- Tip Set Screw
Clear
Material
- Steel
  - S45C Equivalent
- Stainless Steel
  - SUS304
  - SUS440C or 13Cr stainless
Clear
Surface Treatment
Not Provided

Hard Chrome Plating

Black Oxide
Clear
Hardening
- Provided
- Not Provided
Clear
Hardness
Treated Hardness: 45 ~ 50HRC

Treated Hardness: 45 ~ 50HRC, Plating Hardness: 750HV ~

Treated Hardness: 50 ~ 55HRC

Plating Hardness: 750HV

Not Provided
Clear
Outer Dia. D(mm)
6

8

10

12

15

20

25

30
Clear
B(mm)
[4-23/0.5mm Unit(s)]
Clear
L(mm)
[10-80/0.01mm Unit(s)]
Clear
P(mm)
6

8

10

12

16

20
Clear
type
- SPFAB
- STPAB
- STPAC
- STPAHB
- STPAHR
- STPAR
- STPASU
- STPDB
- STPDC
- STPDHB
- STPDHR
- STPDR
- STPDSU
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

7 Day(s) or Less

9 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Additional Products in this Category

Complementary Products

Height Adjusting Pins - Hex - Threaded - High Accuracy
MISUMI Days to Ship : 7 Day(s)
Stop Pins - Press-Fit Type
MISUMI Days to Ship : 1 Day(s) or more
Locating Pins for Fixtures - Standard Grade, Shouldered - Threaded
MISUMI Days to Ship : 6 Day(s) or more

Customers Who Viewed This Item Also Viewed

Height Adjusting Pins - Hex - Threaded - High Accuracy
MISUMI

Days to Ship : 7 Day(s)
Height Adjusting Pins - Round / Wrench Flats
MISUMI

Days to Ship : 7 Day(s) or more
Height Adjusting Pins -Shouldered - Threaded
MISUMI

Days to Ship : 7 Day(s) or more
Height Adjusting Pins - Flat, Tip Set Screw - Tapped
MISUMI

Days to Ship : 7 Day(s) or more
Support Pins - Stepped, Configurable, Straight - Threaded
MISUMI

Days to Ship : 7 Day(s) or more
Height Adjusting Pins-Hex/Medium Accuracy/Threaded
MISUMI

Days to Ship : 7 Day(s)
Small Diameter Height Adjusting Pins - Threaded
MISUMI

Days to Ship : 5 Day(s) or more
Support Pins - Stepped, Configurable, Straight - Tapped
MISUMI

Days to Ship : 7 Day(s) or more
Strut Pin Tip Shape Selectable Type -Female Thread-
MISUMI

Days to Ship : 7 Day(s)
Height Adjusting Pins - Round, Wrench Flats Tapped
MISUMI

Days to Ship : 7 Day(s)
Support Pins - Stepped - Threaded
MISUMI

Days to Ship : 6 Day(s) or more
Support Pins - Stepped, Configurable, Shouldered - Press Fit
MISUMI

Days to Ship : 7 Day(s) or more

back next

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations): Tel：(60) 3 7890 6399; 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday); Technical Inquiry

How can we improve?

Height Adjusting Pins - Flat, Tip Set Screw - Threaded (Part Numbers)

Specifications

Part Number

Basic Information

Configure

Specification/Dimensions

Tip Shape

Material

Surface Treatment

Hardening

Hardness

Outer Dia. D(mm)

B(mm)

L(mm)

P(mm)

type

CAD

Days to Ship

Specify Alterations

Additional Products in this Category

Complementary Products

Customers Who Viewed This Item Also Viewed

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm