(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Locating Pins - Sphere Small Head (D,P Tolerance Selectable-Press Fit) (Part Numbers)
Sphere Small Head with each dimension configurable. The tolerances on both ends are also configurable.
(i)Caution
- The appearances of some products may be changed starting from August 2025. See the link below for details.
Information on Locating Pin Appearance Change - Please check the content on our website as the PDF does not contain the most up-to-date information.
Part Number
Configured Part Number is shown.
●Press Fit
(Round)
(Diamond)
When P<3
a＝0.5
d＝P－0.1
[ ! ]Relief dimension is a reference value.
When P≥3
a＝1.0
d＝P－0.2
[ ! ]When D=P
(1) Round Shape has no relief.
(i) When D=P and tolerances are different
(ii) When D=P and tolerances are the same
(L+B) is general tolerance.
(2) Diamond Shape has a relief.
[ ! ]SUS440C or 13Cr stainless has an identification groove at any position on D part.
[ ! ]Polishing and centering hole may not be provided.
[ ! ]When the P dimension is small, a centering hole will cause the sphere section to become small.
| Material No. | [ M ]Material | [ S ] Surface Treatment | [ H ]Hardness | Type | |
| Round | Diamond | ||||
| (1) | SKS3 Equivalent | - | Treated Hardness: 60~63HRC | KFQSA | KFQSD |
| (2) | SKS3 Equivalent | Hard Chrome Plating | Treated Hardness: 50~55HRC Plating Hardness: 750HV~ | GKFQSA | GKFQSD |
| (3) | SUS304 | - | - | SKFQSA | SKFQSD |
| (4) | SUS440C or 13Cr stainless | - | Treated Hardness: 50~55HRC | CKFQSA | CKFQSD |
Specifications
| Part Number | - | P | - | L | - | B | ||||||||
| Type | Shape | D Tol. | P Tol. | D | ||||||||||
| KFQS | A | G | S | 10 | - | P8.00 | - | L10 | - | B8.0 | ||||
■Tolerance Selection
| D or P | Standard Grade | Precision Grade | |||||
| M | P | G | H | S | A | B | |
| m6 | p6 | g6 | h7 | - | - | - | |
| 1.00 ~ 3.00 | +0.008 +0.002 | +0.012 +0.006 | -0.002 -0.008 | 0 -0.010 | 0 -0.01 | +0.005 0 | 0 -0.005 |
| 3.01 ~ 6.00 | +0.012 +0.004 | +0.020 +0.012 | -0.004 -0.012 | 0 -0.012 | |||
| 6.01 ~ 10.00 | +0.015 +0.006 | +0.024 +0.015 | -0.005 -0.014 | 0 -0.015 | |||
| 10.01 ~ 18.00 | +0.018 +0.007 | +0.029 +0.018 | -0.006 -0.017 | 0 -0.018 | |||
| 18.01 ~ 20.00 | +0.021 +0.008 | +0.035 +0.022 | -0.007 -0.020 | 0 -0.021 | |||
[ NG ]Hard Chrome Plating products are not available in Precision Grade Tolerance.
[ ! ]The spherical head may be polished.
■Press Fit
| Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | C | (W) | Round Shape Unit Price | Diamond Shape Unit Price | ||||||||||
| Type | Shape | D Tolerance Selection | P Tolerance Selection | D | (1)SKS3 Hardened KFQSA | (2)Hard SKS3 GKFQSA | (3)SUS304 SKFQSA | (4)SUS440C or 13Cr stainless CKFQSA | (1)SKS3 Hardened KFQSD | (2)Hard SKS3 GKFQSD | (3)SUS304 SKFQSD | (4)SUS440C or 13Cr stainless CKFQSD | |||||
| KFQS GKFQS * SKFQS CKFQS | A (Round) D (Diamond) | M P G H *A *B | S M P G H *A *B | 2 | 1.00~2.00 | 2~5 | 2.0~10.0 | 0.3 | - | ● | ● | ● | ● | - | - | - | - |
| 3 | 1.00~3.00 | 3~10 | 2.0~10.0 | 0.5 | 1.0 | ● | ● | ● | ● | - | - | - | - | ||||
| 4 | 1.50(2.00)~4.00 | 4~10 | 2.0~10.0 | 1 | 1.0 | ● | ● | ● | ● | ● | ● | ● | ● | ||||
| 5 | 2.00~5.00 | 5~10 | 2.0~15.0(10.0) | 1 | 1.2 | ● | ● | ● | ● | ● | ● | ● | ● | ||||
| 6 | 2.00~6.00 | 5~17 | 2.0~15.0 | 1 | 1.5 | ● | ● | ● | ● | ● | ● | ● | ● | ||||
| 8 | 3.00~8.00 | 8~21 | 2.0~20.0(15.0) | 1.5 | 1.8 | ● | ● | ● | ● | ● | ● | ● | ● | ||||
| 10 | 3.00~10.00 | 10~23 | 3.0~20.0 | 2 | 2.2 | ● | ● | ● | ● | ● | ● | ● | ● | ||||
| 12 | 5.00~12.00 | 12~24 | 3.0~30.0(25.0) | 2 | 2.5 | ● | ● | ● | ● | ● | ● | ● | ● | ||||
| 13 | 6.00~13.00 | 13~26 | 5.0~30.0(25.0) | 2 | 3 | ● | ● | ● | ● | ● | ● | ● | ● | ||||
| 16 | 10.00~16.00 | 16~32 | 5.0~30.0 | 3 | 4 | ● | ● | ● | ● | ● | ● | ● | ● | ||||
| 20 | 13.00~20.00 | 20~40 | 5.0~30.0 | 3 | 5 | ● | ● | ● | ● | ● | ● | ● | ● | ||||
Alterations
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| CKFQSAPP20-P[13-20/0.01]-L[20-40/1]-B[5-20/0.1] |
| CKFQSAPS2-P[1-2/0.01]-L[2-5/1]-B[2-10/0.1] |
| CKFQSAPS3-P[1-3/0.01]-L[3-10/1]-B[2-10/0.1] |
| CKFQSAPS4-P[2-4/0.01]-L[4-8/1]-B[2-10/0.1] |
| CKFQSAPS5-P[2-5/0.01]-L[5-10/1]-B[2-10/0.1] |
| CKFQSAPS6-P[2-6/0.01]-L[6-12/1]-B[2-12/0.1] |
| CKFQSAPS8-P[3-8/0.01]-L[8-16/1]-B[2-15/0.1] |
| CKFQSAPS10-P[3-10/0.01]-L[10-20/1]-B[3-20/0.1] |
| CKFQSAPS12-P[5-12/0.01]-L[12-24/1]-B[3-20/0.1] |
| CKFQSAPS13-P[6-13/0.01]-L[13-26/1]-B[5-20/0.1] |
| CKFQSAPS16-P[10-16/0.01]-L[16-32/1]-B[5-20/0.1] |
| CKFQSAPS20-P[13-20/0.01]-L[20-40/1]-B[5-20/0.1] |
| CKFQSDAA4-P[2-4/0.01]-L[4-8/1]-B[2-10/0.1] |
| CKFQSDAA5-P[2-5/0.01]-L[5-10/1]-B[2-10/0.1] |
| CKFQSDAA6-P[2-6/0.01]-L[6-12/1]-B[2-12/0.1] |
| CKFQSDAA8-P[3-8/0.01]-L[8-16/1]-B[2-15/0.1] |
| CKFQSDAA10-P[3-10/0.01]-L[10-20/1]-B[3-20/0.1] |
| CKFQSDAA12-P[5-12/0.01]-L[12-24/1]-B[3-20/0.1] |
| CKFQSDAA13-P[6-13/0.01]-L[13-26/1]-B[5-20/0.1] |
| CKFQSDAA16-P[10-16/0.01]-L[16-32/1]-B[5-20/0.1] |
| CKFQSDAA20-P[13-20/0.01]-L[20-40/1]-B[5-20/0.1] |
| CKFQSDAB4-P[2-4/0.01]-L[4-8/1]-B[2-10/0.1] |
| CKFQSDAB5-P[2-5/0.01]-L[5-10/1]-B[2-10/0.1] |
| CKFQSDAB6-P[2-6/0.01]-L[6-12/1]-B[2-12/0.1] |
| CKFQSDAB8-P[3-8/0.01]-L[8-16/1]-B[2-15/0.1] |
| CKFQSDAB10-P[3-10/0.01]-L[10-20/1]-B[3-20/0.1] |
| CKFQSDAB12-P[5-12/0.01]-L[12-24/1]-B[3-20/0.1] |
| CKFQSDAB13-P[6-13/0.01]-L[13-26/1]-B[5-20/0.1] |
| CKFQSDAB16-P[10-16/0.01]-L[16-32/1]-B[5-20/0.1] |
| CKFQSDAB20-P[13-20/0.01]-L[20-40/1]-B[5-20/0.1] |
| CKFQSDAG4-P[2-4/0.01]-L[4-8/1]-B[2-10/0.1] |
| CKFQSDAG5-P[2-5/0.01]-L[5-10/1]-B[2-10/0.1] |
| CKFQSDAG6-P[2-6/0.01]-L[6-12/1]-B[2-12/0.1] |
| CKFQSDAG8-P[3-8/0.01]-L[8-16/1]-B[2-15/0.1] |
| CKFQSDAG10-P[3-10/0.01]-L[10-20/1]-B[3-20/0.1] |
| CKFQSDAG12-P[5-12/0.01]-L[12-24/1]-B[3-20/0.1] |
| CKFQSDAG13-P[6-13/0.01]-L[13-26/1]-B[5-20/0.1] |
| CKFQSDAG16-P[10-16/0.01]-L[16-32/1]-B[5-20/0.1] |
| CKFQSDAG20-P[13-20/0.01]-L[20-40/1]-B[5-20/0.1] |
| CKFQSDAH4-P[2-4/0.01]-L[4-8/1]-B[2-10/0.1] |
| CKFQSDAH5-P[2-5/0.01]-L[5-10/1]-B[2-10/0.1] |
| CKFQSDAH6-P[2-6/0.01]-L[6-12/1]-B[2-12/0.1] |
| CKFQSDAH8-P[3-8/0.01]-L[8-16/1]-B[2-15/0.1] |
| CKFQSDAH10-P[3-10/0.01]-L[10-20/1]-B[3-20/0.1] |
| CKFQSDAH12-P[5-12/0.01]-L[12-24/1]-B[3-20/0.1] |
| CKFQSDAH13-P[6-13/0.01]-L[13-26/1]-B[5-20/0.1] |
| CKFQSDAH16-P[10-16/0.01]-L[16-32/1]-B[5-20/0.1] |
| CKFQSDAH20-P[13-20/0.01]-L[20-40/1]-B[5-20/0.1] |
| CKFQSDAM4-P[2-4/0.01]-L[4-8/1]-B[2-10/0.1] |
| CKFQSDAM5-P[2-5/0.01]-L[5-10/1]-B[2-10/0.1] |
| CKFQSDAM6-P[2-6/0.01]-L[6-12/1]-B[2-12/0.1] |
| CKFQSDAM8-P[3-8/0.01]-L[8-16/1]-B[2-15/0.1] |
| CKFQSDAM10-P[3-10/0.01]-L[10-20/1]-B[3-20/0.1] |
| CKFQSDAM12-P[5-12/0.01]-L[12-24/1]-B[3-20/0.1] |
| CKFQSDAM13-P[6-13/0.01]-L[13-26/1]-B[5-20/0.1] |
| CKFQSDAM16-P[10-16/0.01]-L[16-32/1]-B[5-20/0.1] |
| CKFQSDAM20-P[13-20/0.01]-L[20-40/1]-B[5-20/0.1] |
| CKFQSDAP4-P[2-4/0.01]-L[4-8/1]-B[2-10/0.1] |
| CKFQSDAP5-P[2-5/0.01]-L[5-10/1]-B[2-10/0.1] |
| CKFQSDAP6-P[2-6/0.01]-L[6-12/1]-B[2-12/0.1] |
| CKFQSDAP8-P[3-8/0.01]-L[8-16/1]-B[2-15/0.1] |
| CKFQSDAP10-P[3-10/0.01]-L[10-20/1]-B[3-20/0.1] |
| CKFQSDAP12-P[5-12/0.01]-L[12-24/1]-B[3-20/0.1] |
| CKFQSDAP13-P[6-13/0.01]-L[13-26/1]-B[5-20/0.1] |
| CKFQSDAP16-P[10-16/0.01]-L[16-32/1]-B[5-20/0.1] |
| CKFQSDAP20-P[13-20/0.01]-L[20-40/1]-B[5-20/0.1] |
| CKFQSDAS4-P[2-4/0.01]-L[4-8/1]-B[2-10/0.1] |
| CKFQSDAS5-P[2-5/0.01]-L[5-10/1]-B[2-10/0.1] |
| CKFQSDAS6-P[2-6/0.01]-L[6-12/1]-B[2-12/0.1] |
| CKFQSDAS8-P[3-8/0.01]-L[8-16/1]-B[2-15/0.1] |
| CKFQSDAS10-P[3-10/0.01]-L[10-20/1]-B[3-20/0.1] |
| CKFQSDAS12-P[5-12/0.01]-L[12-24/1]-B[3-20/0.1] |
| CKFQSDAS13-P[6-13/0.01]-L[13-26/1]-B[5-20/0.1] |
| CKFQSDAS16-P[10-16/0.01]-L[16-32/1]-B[5-20/0.1] |
| CKFQSDAS20-P[13-20/0.01]-L[20-40/1]-B[5-20/0.1] |
| CKFQSDBA4-P[2-4/0.01]-L[4-8/1]-B[2-10/0.1] |
| CKFQSDBA5-P[2-5/0.01]-L[5-10/1]-B[2-10/0.1] |
| CKFQSDBA6-P[2-6/0.01]-L[6-12/1]-B[2-12/0.1] |
| CKFQSDBA8-P[3-8/0.01]-L[8-16/1]-B[2-15/0.1] |
| CKFQSDBA10-P[3-10/0.01]-L[10-20/1]-B[3-20/0.1] |
| CKFQSDBA12-P[5-12/0.01]-L[12-24/1]-B[3-20/0.1] |
| CKFQSDBA13-P[6-13/0.01]-L[13-26/1]-B[5-20/0.1] |
| CKFQSDBA16-P[10-16/0.01]-L[16-32/1]-B[5-20/0.1] |
| CKFQSDBA20-P[13-20/0.01]-L[20-40/1]-B[5-20/0.1] |
| CKFQSDBB4-P[2-4/0.01]-L[4-8/1]-B[2-10/0.1] |
| CKFQSDBB5-P[2-5/0.01]-L[5-10/1]-B[2-10/0.1] |
| CKFQSDBB6-P[2-6/0.01]-L[6-12/1]-B[2-12/0.1] |
| CKFQSDBB8-P[3-8/0.01]-L[8-16/1]-B[2-15/0.1] |
| CKFQSDBB10-P[3-10/0.01]-L[10-20/1]-B[3-20/0.1] |
| CKFQSDBB12-P[5-12/0.01]-L[12-24/1]-B[3-20/0.1] |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Insertion Guide Tip Shape | Surface Treatment | Heat Treatment | Material | Locating Side Outer Dia. P (Ø) (mm) | Locating Side O.D. Tolerance | Mounting Side Outer Dia. D (mm) | Mounting Side Tolerance | B (mm) | L (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 13 ～ 20 | p6 | 20 | p6 | 5 ～ 20 | 20 ～ 40 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 1 ～ 2 | 0/-0.01 | 2 | p6 | 2 ～ 10 | 2 ～ 5 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 1 ～ 3 | 0/-0.01 | 3 | p6 | 2 ～ 10 | 3 ～ 10 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 2 ～ 4 | 0/-0.01 | 4 | p6 | 2 ～ 10 | 4 ～ 8 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 2 ～ 5 | 0/-0.01 | 5 | p6 | 2 ～ 10 | 5 ～ 10 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 2 ～ 6 | 0/-0.01 | 6 | p6 | 2 ～ 12 | 6 ～ 12 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 3 ～ 8 | 0/-0.01 | 8 | p6 | 2 ～ 15 | 8 ～ 16 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 3 ～ 10 | 0/-0.01 | 10 | p6 | 3 ～ 20 | 10 ～ 20 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 5 ～ 12 | 0/-0.01 | 12 | p6 | 3 ～ 20 | 12 ～ 24 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 6 ～ 13 | 0/-0.01 | 13 | p6 | 5 ～ 20 | 13 ～ 26 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 10 ～ 16 | 0/-0.01 | 16 | p6 | 5 ～ 20 | 16 ～ 32 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 13 ～ 20 | 0/-0.01 | 20 | p6 | 5 ～ 20 | 20 ～ 40 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 2 ～ 4 | 0.005/0 | 4 | 0.005/0 | 2 ～ 10 | 4 ～ 8 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 2 ～ 5 | 0.005/0 | 5 | 0.005/0 | 2 ～ 10 | 5 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 2 ～ 6 | 0.005/0 | 6 | 0.005/0 | 2 ～ 12 | 6 ～ 12 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 3 ～ 8 | 0.005/0 | 8 | 0.005/0 | 2 ～ 15 | 8 ～ 16 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 3 ～ 10 | 0.005/0 | 10 | 0.005/0 | 3 ～ 20 | 10 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 5 ～ 12 | 0.005/0 | 12 | 0.005/0 | 3 ～ 20 | 12 ～ 24 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 6 ～ 13 | 0.005/0 | 13 | 0.005/0 | 5 ～ 20 | 13 ～ 26 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 10 ～ 16 | 0.005/0 | 16 | 0.005/0 | 5 ～ 20 | 16 ～ 32 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 13 ～ 20 | 0.005/0 | 20 | 0.005/0 | 5 ～ 20 | 20 ～ 40 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 2 ～ 4 | 0/-0.005 | 4 | 0.005/0 | 2 ～ 10 | 4 ～ 8 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 2 ～ 5 | 0/-0.005 | 5 | 0.005/0 | 2 ～ 10 | 5 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 2 ～ 6 | 0/-0.005 | 6 | 0.005/0 | 2 ～ 12 | 6 ～ 12 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 3 ～ 8 | 0/-0.005 | 8 | 0.005/0 | 2 ～ 15 | 8 ～ 16 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 3 ～ 10 | 0/-0.005 | 10 | 0.005/0 | 3 ～ 20 | 10 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 5 ～ 12 | 0/-0.005 | 12 | 0.005/0 | 3 ～ 20 | 12 ～ 24 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 6 ～ 13 | 0/-0.005 | 13 | 0.005/0 | 5 ～ 20 | 13 ～ 26 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 10 ～ 16 | 0/-0.005 | 16 | 0.005/0 | 5 ～ 20 | 16 ～ 32 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 13 ～ 20 | 0/-0.005 | 20 | 0.005/0 | 5 ～ 20 | 20 ～ 40 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 2 ～ 4 | g6 | 4 | 0.005/0 | 2 ～ 10 | 4 ～ 8 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 2 ～ 5 | g6 | 5 | 0.005/0 | 2 ～ 10 | 5 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 2 ～ 6 | g6 | 6 | 0.005/0 | 2 ～ 12 | 6 ～ 12 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 3 ～ 8 | g6 | 8 | 0.005/0 | 2 ～ 15 | 8 ～ 16 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 3 ～ 10 | g6 | 10 | 0.005/0 | 3 ～ 20 | 10 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 5 ～ 12 | g6 | 12 | 0.005/0 | 3 ～ 20 | 12 ～ 24 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 6 ～ 13 | g6 | 13 | 0.005/0 | 5 ～ 20 | 13 ～ 26 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 10 ～ 16 | g6 | 16 | 0.005/0 | 5 ～ 20 | 16 ～ 32 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 13 ～ 20 | g6 | 20 | 0.005/0 | 5 ～ 20 | 20 ～ 40 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 2 ～ 4 | h7 | 4 | 0.005/0 | 2 ～ 10 | 4 ～ 8 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 2 ～ 5 | h7 | 5 | 0.005/0 | 2 ～ 10 | 5 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 2 ～ 6 | h7 | 6 | 0.005/0 | 2 ～ 12 | 6 ～ 12 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 3 ～ 8 | h7 | 8 | 0.005/0 | 2 ～ 15 | 8 ～ 16 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 3 ～ 10 | h7 | 10 | 0.005/0 | 3 ～ 20 | 10 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 5 ～ 12 | h7 | 12 | 0.005/0 | 3 ～ 20 | 12 ～ 24 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 6 ～ 13 | h7 | 13 | 0.005/0 | 5 ～ 20 | 13 ～ 26 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 10 ～ 16 | h7 | 16 | 0.005/0 | 5 ～ 20 | 16 ～ 32 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 13 ～ 20 | h7 | 20 | 0.005/0 | 5 ～ 20 | 20 ～ 40 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 2 ～ 4 | m6 | 4 | 0.005/0 | 2 ～ 10 | 4 ～ 8 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 2 ～ 5 | m6 | 5 | 0.005/0 | 2 ～ 10 | 5 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 2 ～ 6 | m6 | 6 | 0.005/0 | 2 ～ 12 | 6 ～ 12 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 3 ～ 8 | m6 | 8 | 0.005/0 | 2 ～ 15 | 8 ～ 16 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 3 ～ 10 | m6 | 10 | 0.005/0 | 3 ～ 20 | 10 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 5 ～ 12 | m6 | 12 | 0.005/0 | 3 ～ 20 | 12 ～ 24 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 6 ～ 13 | m6 | 13 | 0.005/0 | 5 ～ 20 | 13 ～ 26 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 10 ～ 16 | m6 | 16 | 0.005/0 | 5 ～ 20 | 16 ～ 32 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 13 ～ 20 | m6 | 20 | 0.005/0 | 5 ～ 20 | 20 ～ 40 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 2 ～ 4 | p6 | 4 | 0.005/0 | 2 ～ 10 | 4 ～ 8 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 2 ～ 5 | p6 | 5 | 0.005/0 | 2 ～ 10 | 5 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 2 ～ 6 | p6 | 6 | 0.005/0 | 2 ～ 12 | 6 ～ 12 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 3 ～ 8 | p6 | 8 | 0.005/0 | 2 ～ 15 | 8 ～ 16 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 3 ～ 10 | p6 | 10 | 0.005/0 | 3 ～ 20 | 10 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 5 ～ 12 | p6 | 12 | 0.005/0 | 3 ～ 20 | 12 ～ 24 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 6 ～ 13 | p6 | 13 | 0.005/0 | 5 ～ 20 | 13 ～ 26 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 10 ～ 16 | p6 | 16 | 0.005/0 | 5 ～ 20 | 16 ～ 32 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 13 ～ 20 | p6 | 20 | 0.005/0 | 5 ～ 20 | 20 ～ 40 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 2 ～ 4 | 0/-0.01 | 4 | 0.005/0 | 2 ～ 10 | 4 ～ 8 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 2 ～ 5 | 0/-0.01 | 5 | 0.005/0 | 2 ～ 10 | 5 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 2 ～ 6 | 0/-0.01 | 6 | 0.005/0 | 2 ～ 12 | 6 ～ 12 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 3 ～ 8 | 0/-0.01 | 8 | 0.005/0 | 2 ～ 15 | 8 ～ 16 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 3 ～ 10 | 0/-0.01 | 10 | 0.005/0 | 3 ～ 20 | 10 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 5 ～ 12 | 0/-0.01 | 12 | 0.005/0 | 3 ～ 20 | 12 ～ 24 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 6 ～ 13 | 0/-0.01 | 13 | 0.005/0 | 5 ～ 20 | 13 ～ 26 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 10 ～ 16 | 0/-0.01 | 16 | 0.005/0 | 5 ～ 20 | 16 ～ 32 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 13 ～ 20 | 0/-0.01 | 20 | 0.005/0 | 5 ～ 20 | 20 ～ 40 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 2 ～ 4 | 0.005/0 | 4 | 0/-0.005 | 2 ～ 10 | 4 ～ 8 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 2 ～ 5 | 0.005/0 | 5 | 0/-0.005 | 2 ～ 10 | 5 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 2 ～ 6 | 0.005/0 | 6 | 0/-0.005 | 2 ～ 12 | 6 ～ 12 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 3 ～ 8 | 0.005/0 | 8 | 0/-0.005 | 2 ～ 15 | 8 ～ 16 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 3 ～ 10 | 0.005/0 | 10 | 0/-0.005 | 3 ～ 20 | 10 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 5 ～ 12 | 0.005/0 | 12 | 0/-0.005 | 3 ～ 20 | 12 ～ 24 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 6 ～ 13 | 0.005/0 | 13 | 0/-0.005 | 5 ～ 20 | 13 ～ 26 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 10 ～ 16 | 0.005/0 | 16 | 0/-0.005 | 5 ～ 20 | 16 ～ 32 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 13 ～ 20 | 0.005/0 | 20 | 0/-0.005 | 5 ～ 20 | 20 ～ 40 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 2 ～ 4 | 0/-0.005 | 4 | 0/-0.005 | 2 ～ 10 | 4 ～ 8 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 2 ～ 5 | 0/-0.005 | 5 | 0/-0.005 | 2 ～ 10 | 5 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 2 ～ 6 | 0/-0.005 | 6 | 0/-0.005 | 2 ～ 12 | 6 ～ 12 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 3 ～ 8 | 0/-0.005 | 8 | 0/-0.005 | 2 ～ 15 | 8 ～ 16 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 3 ～ 10 | 0/-0.005 | 10 | 0/-0.005 | 3 ～ 20 | 10 ～ 20 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Diamond | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 5 ～ 12 | 0/-0.005 | 12 | 0/-0.005 | 3 ～ 20 | 12 ～ 24 |
Loading...
Basic Information
| Basic Shape | Small Head | Insertion Guide Tip Type | Spherical | Insertion Guide Specifications | Not Provided |
|---|---|---|---|---|---|
| Mounting Side Shape | Straight (Press-Fit) |
Specification/Dimensions
-
Insertion Guide Tip Shape
-
Round -
Diamond
-
-
Surface Treatment
- Not Provided
- Hard Chrome Plating
-
Heat Treatment
- Not Provided
- Dip Quenching
-
Material
- Steel
- Stainless Steel
- Steel
-
Locating Side Outer Dia. P (Ø)(mm)
-
Locating Side O.D. Tolerance
-
Mounting Side Outer Dia. D(mm)
-
Mounting Side Tolerance
-
B(mm)
-
L(mm)
-
type
- CKFQSA□□
- CKFQSDAA
- CKFQSDAB
- CKFQSDAG
- CKFQSDAH
- CKFQSDAM
- CKFQSDAP
- CKFQSDAS
- CKFQSDBA
- CKFQSDBB
- CKFQSDBG
- CKFQSDBH
- CKFQSDBM
- CKFQSDBP
- CKFQSDBS
- CKFQSDGA
- CKFQSDGB
- CKFQSDGG
- CKFQSDGH
- CKFQSDGM
- CKFQSDGP
- CKFQSDGS
- CKFQSDHA
- CKFQSDHB
- CKFQSDHG
- CKFQSDHH
- CKFQSDHM
- CKFQSDHP
- CKFQSDHS
- CKFQSDMA
- CKFQSDMB
- CKFQSDMG
- CKFQSDMH
- CKFQSDMM
- CKFQSDMP
- CKFQSDMS
- CKFQSDPA
- CKFQSDPB
- CKFQSDPG
- CKFQSDPH
- CKFQSDPM
- CKFQSDPP
- CKFQSDPS
- GKFQSA□□
- GKFQSDGG
- GKFQSDGH
- GKFQSDGM
- GKFQSDGP
- GKFQSDGS
- GKFQSDHG
- GKFQSDHH
- GKFQSDHM
- GKFQSDHP
- GKFQSDHS
- GKFQSDMG
- GKFQSDMH
- GKFQSDMM
- GKFQSDMP
- GKFQSDMS
- GKFQSDPG
- GKFQSDPH
- GKFQSDPM
- GKFQSDPP
- GKFQSDPS
- KFQSA□□
- KFQSD□□
- SKFQSA□□
- SKFQSD□□
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 3 Day(s) or Less
- 4 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Locating Pins - Large Flat Head (Threaded)
- Plate Centering Pins
- Feed Pins - Shouldered - Press Fit
- Marker Pins - Hexagon Socket Type
- Locating Pins - Press Fit
- Locating Pins - Large Flat Head - Side Locating - Press Fit
- Locating Pins for Height Adjusting - Small Head Press Fit
- [Clean & Pack]Locating Pin - Large Head, Tapered, Non-Magnetic Type, Tapped
Complementary Products
-
Locating Pins for Fixtures - Standard Grade, Shouldered - Threaded
MISUMI Days to Ship : 6 Day(s) or more
Customers Who Viewed This Item Also Viewed
-
-
-
Locating Pins - Shouldered - Tapered, Shoulder Thickness Configurable - Press FitMISUMI
Days to Ship : 3 Day(s) or more
-
Locating Pins - Small Flat Head (D,P Tolerance Selectable-Press Fit)MISUMI
Days to Ship : 3 Day(s) or more
-
-
Locating Pins - High Hardness Stainless Steel, Small Head, Tapered (Press Fit)MISUMI
Days to Ship : 6 Day(s) or more
-
-
Locating Pins - Sphere Small Head (D,P Tolerance Selectable-Tapped)MISUMI
Days to Ship : 3 Day(s) or more
-
Locating Pin High Hardness Stainless Small Head Spherical -Press Fit-MISUMI
Days to Ship : 6 Day(s) or more
-
Locating Pins - Small Head, Round Tapered, D and P Tolerance, Taper R Selectable - Press FitMISUMI
Days to Ship : -
-
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy