(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Height Adjusting Pins - Press Fit (Part Numbers)
- Volume Discount
- Height Adjusting Pins - Press Fit from MISUMI.
- Small Head, Tapered, with each dimension configurable. The tolerances on both ends and the tapered dimensions are also configurable.
- The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- Polished, centering hole is sometimes not available for SUS304.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- Hard Chrome Plating products are not available in Precision Grade Tolerance.
(i)Caution
- The appearances of some products may be changed starting from August 2025. See the link below for details.
Information on Locating Pin Appearance Change - Please check the content on our website as the PDF does not contain the most up-to-date information.
Part Number
Configured Part Number is shown.
●Press Fit
(Round)
(Diamond)
When P<3
a＝0.5
d＝P－0.1
[ ! ]Relief dimension is a reference value.
When P≥3
a＝1.0
d＝P－0.2
[ ! ]When D=P
(1) Round Shape has no relief.
(i) When D=P and tolerances are different
(ii) When D=P and tolerances are the same
(L+B) is general tolerance.
(1) Round Shape has no relief.
(i) When D=P and tolerances are different
(ii) When D=P and tolerances are the same
(L+B) is general tolerance.
(2) Diamond Shape has a relief.
[ ! ]Straight Tapered Type for which D=P is standardized is also available. >>here
[ ! ]Polishing and centering hole sometimes not available for SUS304.
[ ! ]P-2EtanA≥0.73 (Tip dia. Ø0.73 or more)
Reference: tan15°≈0.267 tan30°≈0.577
tan45°=1 tan60°≈1.732
[ ! ]On some combination of dimensions, the centering hole may not be available.
| Material No. | [ M ]Material | [ S ]Surface Treatment | [ H ]Hardness | Type | |
| Round | Diamond | ||||
| (1) | SKS3 Equivalent | - | Treated Hardness: 60~63HRC | KFSA | KFSD |
| (2) | SKS3 Equivalent | Hard Chrome Plating | Treated Hardness: 50~55HRC Plating Hardness: 750HV~ | GKFSA | GKFSD |
| (4) | SUS304 | - | - | SKFSA | SKFSD |
| (5) | SUS304 | Hard Chrome Plating | Plating Hardness: 750HV~ | HKFSA | HKFSD |
| (6) | SUS440C or 13Cr stainless | - | Treated Hardness: 50~55HRC | CKFSA | CKFSD |
Specifications
| Part Number | - | P | - | L | - | B | - | E | - | A | ||||||||
| Type | Shape | D Tol. | P Tol. | D | ||||||||||||||
| KFS | A | G | S | 10 | - | P8.00 | - | L10 | - | B8.0 | - | E3.0 | - | A30 | ||||
■Tolerance Selection
| D or P | Standard Grade | Precision Grade | |||||
| M | P | G | H | S | A | B | |
| m6 | p6 | g6 | h7 | - | - | - | |
| 1.00 ~ 3.00 | +0.008 +0.002 | +0.012 +0.006 | -0.002 -0.008 | 0 -0.010 | 0 -0.01 | +0.005 0 | 0 -0.005 |
| 3.01 ~ 6.00 | +0.012 +0.004 | +0.020 +0.012 | -0.004 -0.012 | 0 -0.012 | |||
| 6.01 ~ 10.00 | +0.015 +0.006 | +0.024 +0.015 | -0.005 -0.014 | 0 -0.015 | |||
| 10.01 ~ 18.00 | +0.018 +0.007 | +0.029 +0.018 | -0.006 -0.017 | 0 -0.018 | |||
| 18.01 ~ 20.00 | +0.021 +0.008 | +0.035 +0.022 | -0.007 -0.020 | 0 -0.021 | |||
[ NG ]Hard Chrome Plating products are not available in Precision Grade Tolerance.
■Press Fit
| Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | E 0.1mm Increment | A Selection | C | (W) | Round Shape Unit Price | Diamond Shape Unit Price | ||||||||||||
| Type | Shape | D Tolerance Selection | P Tolerance Selection | D | (1) KFSA | (2) GKFSA | (4) SKFSA | (5) HKFSA | (6) CKFSA | (1) KFSD | (2) GKFSD | (4) SKFSD | (5) HKFSD | (6) CKFSD | |||||||
| KFS GKFS * SKFS HKFS * CKFS | A (Round) D (Diamond) | M P G H *A *B | S M P G H *A *B | 2 | 1.00~2.00 | 2~5 | 2.0~10.0 | 0.5 ~ 10.0 | 15 30 45 60 | 0.3 | - | - | - | - | - | - | |||||
| 3 | 1.00(2.00)~3.00 | 3~10 | 2.0~10.0 | 0.5 | 1.0 | ||||||||||||||||
| 4 | 1.50(2.00)~4.00 | 4~10 | 2.0~10.0 | 1 | 1.0 | ||||||||||||||||
| 5 | 2.00~5.00 | 5~10 | 2.0~15.0(10.0) | 1 | 1.2 | ||||||||||||||||
| 6 | 2.00~6.00 | 5~17 | 2.0~15.0 | 1 | 1.5 | ||||||||||||||||
| 8 | 3.00~8.00 | 8~21 | 2.0~20.0(15.0) | 1.5 | 1.8 | ||||||||||||||||
| 10 | 3.00~10.00 | 10~23 | 3.0~20.0 | 2 | 2.2 | ||||||||||||||||
| 12 | 5.00~12.00 | 12~24 | 3.0~30.0(25.0) | 2 | 2.5 | ||||||||||||||||
| 13 | 6.00~13.00 | 13~26 | 5.0~30.0(25.0) | 2 | 3 | ||||||||||||||||
| 16 | 10.00~16.00 | 16~32 | 5.0~30.0 | 3 | 4 | ||||||||||||||||
| 20 | 13.00~20.00 | 20~40 | 5.0~30.0 | 3 | 5 | ||||||||||||||||
Alterations
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| CKFSAHH10-P[3-10/0.01]-L[10-20/1]-B[3-20/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAHH12-P[5-12/0.01]-L[12-24/1]-B[3-20/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAHH13-P[6-13/0.01]-L[13-26/1]-B[5-20/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAHH16-P[10-16/0.01]-L[16-32/1]-B[5-20/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAHH20-P[13-20/0.01]-L[20-40/1]-B[5-20/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAHM2-P[1-2/0.01]-L[2-5/1]-B[2-10/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAHM3-P[1-3/0.01]-L[3-10/1]-B[2-10/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAHM4-P[2-4/0.01]-L[4-8/1]-B[2-10/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAHM5-P[2-5/0.01]-L[5-10/1]-B[2-10/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAHM6-P[2-6/0.01]-L[6-12/1]-B[2-12/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAHM8-P[3-8/0.01]-L[8-16/1]-B[2-15/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAHM10-P[3-10/0.01]-L[10-20/1]-B[3-20/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAHM12-P[5-12/0.01]-L[12-24/1]-B[3-20/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAHM13-P[6-13/0.01]-L[13-26/1]-B[5-20/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAHM16-P[10-16/0.01]-L[16-32/1]-B[5-20/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAHM20-P[13-20/0.01]-L[20-40/1]-B[5-20/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAHP2-P[1-2/0.01]-L[2-5/1]-B[2-10/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAHP3-P[1-3/0.01]-L[3-10/1]-B[2-10/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAHP4-P[2-4/0.01]-L[4-8/1]-B[2-10/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAHP5-P[2-5/0.01]-L[5-10/1]-B[2-10/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAHP6-P[2-6/0.01]-L[6-12/1]-B[2-12/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAHP8-P[3-8/0.01]-L[8-16/1]-B[2-15/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAHP10-P[3-10/0.01]-L[10-20/1]-B[3-20/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAHP12-P[5-12/0.01]-L[12-24/1]-B[3-20/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAHP13-P[6-13/0.01]-L[13-26/1]-B[5-20/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAHP16-P[10-16/0.01]-L[16-32/1]-B[5-20/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAHP20-P[13-20/0.01]-L[20-40/1]-B[5-20/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAHS2-P[1-2/0.01]-L[2-5/1]-B[2-10/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAHS3-P[1-3/0.01]-L[3-10/1]-B[2-10/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAHS4-P[2-4/0.01]-L[4-8/1]-B[2-10/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAHS5-P[2-5/0.01]-L[5-10/1]-B[2-10/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAHS6-P[2-6/0.01]-L[6-12/1]-B[2-12/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAHS8-P[3-8/0.01]-L[8-16/1]-B[2-15/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAHS10-P[3-10/0.01]-L[10-20/1]-B[3-20/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAHS12-P[5-12/0.01]-L[12-24/1]-B[3-20/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAHS13-P[6-13/0.01]-L[13-26/1]-B[5-20/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAHS16-P[10-16/0.01]-L[16-32/1]-B[5-20/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAHS20-P[13-20/0.01]-L[20-40/1]-B[5-20/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAMA2-P[1-2/0.01]-L[2-4/1]-B[2-10/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAMA3-P[1-3/0.01]-L[3-6/1]-B[2-10/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAMA4-P[2-4/0.01]-L[4-8/1]-B[2-10/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAMA5-P[2-5/0.01]-L[5-10/1]-B[2-10/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAMA6-P[2-6/0.01]-L[6-12/1]-B[2-12/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAMA8-P[3-8/0.01]-L[8-16/1]-B[2-15/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAMA10-P[3-10/0.01]-L[10-20/1]-B[3-20/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAMA12-P[5-12/0.01]-L[12-24/1]-B[3-20/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAMA13-P[6-13/0.01]-L[13-26/1]-B[5-20/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAMA16-P[10-16/0.01]-L[16-32/1]-B[5-20/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAMA20-P[13-20/0.01]-L[20-40/1]-B[5-20/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAMB2-P[1-2/0.01]-L[2-4/1]-B[2-10/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAMB3-P[1-3/0.01]-L[3-6/1]-B[2-10/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAMB4-P[2-4/0.01]-L[4-8/1]-B[2-10/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAMB5-P[2-5/0.01]-L[5-10/1]-B[2-10/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAMB6-P[2-6/0.01]-L[6-12/1]-B[2-12/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAMB8-P[3-8/0.01]-L[8-16/1]-B[2-15/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAMB10-P[3-10/0.01]-L[10-20/1]-B[3-20/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAMB12-P[5-12/0.01]-L[12-24/1]-B[3-20/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAMB13-P[6-13/0.01]-L[13-26/1]-B[5-20/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAMB16-P[10-16/0.01]-L[16-32/1]-B[5-20/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAMB20-P[13-20/0.01]-L[20-40/1]-B[5-20/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAMG2-P[1-2/0.01]-L[2-5/1]-B[2-10/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAMG3-P[1-3/0.01]-L[3-10/1]-B[2-10/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAMG4-P[2-4/0.01]-L[4-8/1]-B[2-10/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAMG5-P[2-5/0.01]-L[5-10/1]-B[2-10/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAMG6-P[2-6/0.01]-L[6-12/1]-B[2-12/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAMG8-P[3-8/0.01]-L[8-16/1]-B[2-15/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAMG10-P[3-10/0.01]-L[10-20/1]-B[3-20/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAMG12-P[5-12/0.01]-L[12-24/1]-B[3-20/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAMG13-P[6-13/0.01]-L[13-26/1]-B[5-20/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAMG16-P[10-16/0.01]-L[16-32/1]-B[5-20/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAMG20-P[13-20/0.01]-L[20-40/1]-B[5-20/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAMH2-P[1-2/0.01]-L[2-5/1]-B[2-10/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAMH3-P[1-3/0.01]-L[3-10/1]-B[2-10/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAMH4-P[2-4/0.01]-L[4-8/1]-B[2-10/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAMH5-P[2-5/0.01]-L[5-10/1]-B[2-10/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAMH6-P[2-6/0.01]-L[6-12/1]-B[2-12/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAMH8-P[3-8/0.01]-L[8-16/1]-B[2-15/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAMH10-P[3-10/0.01]-L[10-20/1]-B[3-20/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAMH12-P[5-12/0.01]-L[12-24/1]-B[3-20/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAMH13-P[6-13/0.01]-L[13-26/1]-B[5-20/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAMH16-P[10-16/0.01]-L[16-32/1]-B[5-20/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAMH20-P[13-20/0.01]-L[20-40/1]-B[5-20/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAMM2-P[1-2/0.01]-L[2-5/1]-B[2-10/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAMM3-P[1-3/0.01]-L[3-10/1]-B[2-10/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAMM4-P[2-4/0.01]-L[4-8/1]-B[2-10/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAMM5-P[2-5/0.01]-L[5-10/1]-B[2-10/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAMM6-P[2-6/0.01]-L[6-12/1]-B[2-12/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAMM8-P[3-8/0.01]-L[8-21/1]-B[2-20/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAMM10-P[3-10/0.01]-L[10-20/1]-B[3-20/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| CKFSAMM12-P[5-12/0.01]-L[12-24/1]-B[3-20/0.1]-E[0-10/0.1]-A[15,30,45,60] |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Insertion Guide Tip Shape | Surface Treatment | Heat Treatment | Material | Locating Side Outer Dia. P (Ø) (mm) | Locating Side O.D. Tolerance | Mounting Side Outer Dia. D (mm) | Mounting Side Tolerance | A (°) | B (mm) | E | L (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 3 ～ 10 | h7 | 10 | h7 | 15 ～ 60 | 3 ～ 20 | 0 ～ 10 | 10 ～ 20 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 5 ～ 12 | h7 | 12 | h7 | 15 ～ 60 | 3 ～ 20 | 0 ～ 10 | 12 ～ 24 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 6 ～ 13 | h7 | 13 | h7 | 15 ～ 60 | 5 ～ 20 | 0 ～ 10 | 13 ～ 26 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 10 ～ 16 | h7 | 16 | h7 | 15 ～ 60 | 5 ～ 20 | 0 ～ 10 | 16 ～ 32 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 13 ～ 20 | h7 | 20 | h7 | 15 ～ 60 | 5 ～ 20 | 0 ～ 10 | 20 ～ 40 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 1 ～ 2 | m6 | 2 | h7 | 15 ～ 60 | 2 ～ 10 | 0 ～ 10 | 2 ～ 5 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 1 ～ 3 | m6 | 3 | h7 | 15 ～ 60 | 2 ～ 10 | 0 ～ 10 | 3 ～ 10 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 2 ～ 4 | m6 | 4 | h7 | 15 ～ 60 | 2 ～ 10 | 0 ～ 10 | 4 ～ 8 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 2 ～ 5 | m6 | 5 | h7 | 15 ～ 60 | 2 ～ 10 | 0 ～ 10 | 5 ～ 10 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 2 ～ 6 | m6 | 6 | h7 | 15 ～ 60 | 2 ～ 12 | 0 ～ 10 | 6 ～ 12 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 3 ～ 8 | m6 | 8 | h7 | 15 ～ 60 | 2 ～ 15 | 0 ～ 10 | 8 ～ 16 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 3 ～ 10 | m6 | 10 | h7 | 15 ～ 60 | 3 ～ 20 | 0 ～ 10 | 10 ～ 20 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 5 ～ 12 | m6 | 12 | h7 | 15 ～ 60 | 3 ～ 20 | 0 ～ 10 | 12 ～ 24 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 6 ～ 13 | m6 | 13 | h7 | 15 ～ 60 | 5 ～ 20 | 0 ～ 10 | 13 ～ 26 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 10 ～ 16 | m6 | 16 | h7 | 15 ～ 60 | 5 ～ 20 | 0 ～ 10 | 16 ～ 32 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 13 ～ 20 | m6 | 20 | h7 | 15 ～ 60 | 5 ～ 20 | 0 ～ 10 | 20 ～ 40 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 1 ～ 2 | p6 | 2 | h7 | 15 ～ 60 | 2 ～ 10 | 0 ～ 10 | 2 ～ 5 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 1 ～ 3 | p6 | 3 | h7 | 15 ～ 60 | 2 ～ 10 | 0 ～ 10 | 3 ～ 10 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 2 ～ 4 | p6 | 4 | h7 | 15 ～ 60 | 2 ～ 10 | 0 ～ 10 | 4 ～ 8 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 2 ～ 5 | p6 | 5 | h7 | 15 ～ 60 | 2 ～ 10 | 0 ～ 10 | 5 ～ 10 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 2 ～ 6 | p6 | 6 | h7 | 15 ～ 60 | 2 ～ 12 | 0 ～ 10 | 6 ～ 12 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 3 ～ 8 | p6 | 8 | h7 | 15 ～ 60 | 2 ～ 15 | 0 ～ 10 | 8 ～ 16 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 3 ～ 10 | p6 | 10 | h7 | 15 ～ 60 | 3 ～ 20 | 0 ～ 10 | 10 ～ 20 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 5 ～ 12 | p6 | 12 | h7 | 15 ～ 60 | 3 ～ 20 | 0 ～ 10 | 12 ～ 24 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 6 ～ 13 | p6 | 13 | h7 | 15 ～ 60 | 5 ～ 20 | 0 ～ 10 | 13 ～ 26 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 10 ～ 16 | p6 | 16 | h7 | 15 ～ 60 | 5 ～ 20 | 0 ～ 10 | 16 ～ 32 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 13 ～ 20 | p6 | 20 | h7 | 15 ～ 60 | 5 ～ 20 | 0 ～ 10 | 20 ～ 40 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 1 ～ 2 | 0/-0.01 | 2 | h7 | 15 ～ 60 | 2 ～ 10 | 0 ～ 10 | 2 ～ 5 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 1 ～ 3 | 0/-0.01 | 3 | h7 | 15 ～ 60 | 2 ～ 10 | 0 ～ 10 | 3 ～ 10 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 2 ～ 4 | 0/-0.01 | 4 | h7 | 15 ～ 60 | 2 ～ 10 | 0 ～ 10 | 4 ～ 8 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 2 ～ 5 | 0/-0.01 | 5 | h7 | 15 ～ 60 | 2 ～ 10 | 0 ～ 10 | 5 ～ 10 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 2 ～ 6 | 0/-0.01 | 6 | h7 | 15 ～ 60 | 2 ～ 12 | 0 ～ 10 | 6 ～ 12 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 3 ～ 8 | 0/-0.01 | 8 | h7 | 15 ～ 60 | 2 ～ 15 | 0 ～ 10 | 8 ～ 16 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 3 ～ 10 | 0/-0.01 | 10 | h7 | 15 ～ 60 | 3 ～ 20 | 0 ～ 10 | 10 ～ 20 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 5 ～ 12 | 0/-0.01 | 12 | h7 | 15 ～ 60 | 3 ～ 20 | 0 ～ 10 | 12 ～ 24 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 6 ～ 13 | 0/-0.01 | 13 | h7 | 15 ～ 60 | 5 ～ 20 | 0 ～ 10 | 13 ～ 26 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 10 ～ 16 | 0/-0.01 | 16 | h7 | 15 ～ 60 | 5 ～ 20 | 0 ～ 10 | 16 ～ 32 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 13 ～ 20 | 0/-0.01 | 20 | h7 | 15 ～ 60 | 5 ～ 20 | 0 ～ 10 | 20 ～ 40 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 1 ～ 2 | 0.005/0 | 2 | m6 | 15 ～ 60 | 2 ～ 10 | 0 ～ 10 | 2 ～ 4 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 1 ～ 3 | 0.005/0 | 3 | m6 | 15 ～ 60 | 2 ～ 10 | 0 ～ 10 | 3 ～ 6 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 2 ～ 4 | 0.005/0 | 4 | m6 | 15 ～ 60 | 2 ～ 10 | 0 ～ 10 | 4 ～ 8 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 2 ～ 5 | 0.005/0 | 5 | m6 | 15 ～ 60 | 2 ～ 10 | 0 ～ 10 | 5 ～ 10 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 2 ～ 6 | 0.005/0 | 6 | m6 | 15 ～ 60 | 2 ～ 12 | 0 ～ 10 | 6 ～ 12 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 3 ～ 8 | 0.005/0 | 8 | m6 | 15 ～ 60 | 2 ～ 15 | 0 ～ 10 | 8 ～ 16 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 3 ～ 10 | 0.005/0 | 10 | m6 | 15 ～ 60 | 3 ～ 20 | 0 ～ 10 | 10 ～ 20 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 5 ～ 12 | 0.005/0 | 12 | m6 | 15 ～ 60 | 3 ～ 20 | 0 ～ 10 | 12 ～ 24 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 6 ～ 13 | 0.005/0 | 13 | m6 | 15 ～ 60 | 5 ～ 20 | 0 ～ 10 | 13 ～ 26 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 10 ～ 16 | 0.005/0 | 16 | m6 | 15 ～ 60 | 5 ～ 20 | 0 ～ 10 | 16 ～ 32 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 13 ～ 20 | 0.005/0 | 20 | m6 | 15 ～ 60 | 5 ～ 20 | 0 ～ 10 | 20 ～ 40 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 1 ～ 2 | 0/-0.005 | 2 | m6 | 15 ～ 60 | 2 ～ 10 | 0 ～ 10 | 2 ～ 4 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 1 ～ 3 | 0/-0.005 | 3 | m6 | 15 ～ 60 | 2 ～ 10 | 0 ～ 10 | 3 ～ 6 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 2 ～ 4 | 0/-0.005 | 4 | m6 | 15 ～ 60 | 2 ～ 10 | 0 ～ 10 | 4 ～ 8 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 2 ～ 5 | 0/-0.005 | 5 | m6 | 15 ～ 60 | 2 ～ 10 | 0 ～ 10 | 5 ～ 10 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 2 ～ 6 | 0/-0.005 | 6 | m6 | 15 ～ 60 | 2 ～ 12 | 0 ～ 10 | 6 ～ 12 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 3 ～ 8 | 0/-0.005 | 8 | m6 | 15 ～ 60 | 2 ～ 15 | 0 ～ 10 | 8 ～ 16 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 3 ～ 10 | 0/-0.005 | 10 | m6 | 15 ～ 60 | 3 ～ 20 | 0 ～ 10 | 10 ～ 20 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 5 ～ 12 | 0/-0.005 | 12 | m6 | 15 ～ 60 | 3 ～ 20 | 0 ～ 10 | 12 ～ 24 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 6 ～ 13 | 0/-0.005 | 13 | m6 | 15 ～ 60 | 5 ～ 20 | 0 ～ 10 | 13 ～ 26 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 10 ～ 16 | 0/-0.005 | 16 | m6 | 15 ～ 60 | 5 ～ 20 | 0 ～ 10 | 16 ～ 32 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 13 ～ 20 | 0/-0.005 | 20 | m6 | 15 ～ 60 | 5 ～ 20 | 0 ～ 10 | 20 ～ 40 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 1 ～ 2 | g6 | 2 | m6 | 15 ～ 60 | 2 ～ 10 | 0 ～ 10 | 2 ～ 5 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 1 ～ 3 | g6 | 3 | m6 | 15 ～ 60 | 2 ～ 10 | 0 ～ 10 | 3 ～ 10 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 2 ～ 4 | g6 | 4 | m6 | 15 ～ 60 | 2 ～ 10 | 0 ～ 10 | 4 ～ 8 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 2 ～ 5 | g6 | 5 | m6 | 15 ～ 60 | 2 ～ 10 | 0 ～ 10 | 5 ～ 10 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 2 ～ 6 | g6 | 6 | m6 | 15 ～ 60 | 2 ～ 12 | 0 ～ 10 | 6 ～ 12 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 3 ～ 8 | g6 | 8 | m6 | 15 ～ 60 | 2 ～ 15 | 0 ～ 10 | 8 ～ 16 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 3 ～ 10 | g6 | 10 | m6 | 15 ～ 60 | 3 ～ 20 | 0 ～ 10 | 10 ～ 20 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 5 ～ 12 | g6 | 12 | m6 | 15 ～ 60 | 3 ～ 20 | 0 ～ 10 | 12 ～ 24 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 6 ～ 13 | g6 | 13 | m6 | 15 ～ 60 | 5 ～ 20 | 0 ～ 10 | 13 ～ 26 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 10 ～ 16 | g6 | 16 | m6 | 15 ～ 60 | 5 ～ 20 | 0 ～ 10 | 16 ～ 32 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 13 ～ 20 | g6 | 20 | m6 | 15 ～ 60 | 5 ～ 20 | 0 ～ 10 | 20 ～ 40 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 1 ～ 2 | h7 | 2 | m6 | 15 ～ 60 | 2 ～ 10 | 0 ～ 10 | 2 ～ 5 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 1 ～ 3 | h7 | 3 | m6 | 15 ～ 60 | 2 ～ 10 | 0 ～ 10 | 3 ～ 10 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 2 ～ 4 | h7 | 4 | m6 | 15 ～ 60 | 2 ～ 10 | 0 ～ 10 | 4 ～ 8 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 2 ～ 5 | h7 | 5 | m6 | 15 ～ 60 | 2 ～ 10 | 0 ～ 10 | 5 ～ 10 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 2 ～ 6 | h7 | 6 | m6 | 15 ～ 60 | 2 ～ 12 | 0 ～ 10 | 6 ～ 12 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 3 ～ 8 | h7 | 8 | m6 | 15 ～ 60 | 2 ～ 15 | 0 ～ 10 | 8 ～ 16 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 3 ～ 10 | h7 | 10 | m6 | 15 ～ 60 | 3 ～ 20 | 0 ～ 10 | 10 ～ 20 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 5 ～ 12 | h7 | 12 | m6 | 15 ～ 60 | 3 ～ 20 | 0 ～ 10 | 12 ～ 24 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 6 ～ 13 | h7 | 13 | m6 | 15 ～ 60 | 5 ～ 20 | 0 ～ 10 | 13 ～ 26 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 10 ～ 16 | h7 | 16 | m6 | 15 ～ 60 | 5 ～ 20 | 0 ～ 10 | 16 ～ 32 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 13 ～ 20 | h7 | 20 | m6 | 15 ～ 60 | 5 ～ 20 | 0 ～ 10 | 20 ～ 40 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 1 ～ 2 | m6 | 2 | m6 | 15 ～ 60 | 2 ～ 10 | 0 ～ 10 | 2 ～ 5 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 1 ～ 3 | m6 | 3 | m6 | 15 ～ 60 | 2 ～ 10 | 0 ～ 10 | 3 ～ 10 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 2 ～ 4 | m6 | 4 | m6 | 15 ～ 60 | 2 ～ 10 | 0 ～ 10 | 4 ～ 8 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 2 ～ 5 | m6 | 5 | m6 | 15 ～ 60 | 2 ～ 10 | 0 ～ 10 | 5 ～ 10 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 2 ～ 6 | m6 | 6 | m6 | 15 ～ 60 | 2 ～ 12 | 0 ～ 10 | 6 ～ 12 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 3 ～ 8 | m6 | 8 | m6 | 15 ～ 60 | 2 ～ 20 | 0 ～ 10 | 8 ～ 21 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 3 ～ 10 | m6 | 10 | m6 | 15 ～ 60 | 3 ～ 20 | 0 ～ 10 | 10 ～ 20 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 5 ～ 12 | m6 | 12 | m6 | 15 ～ 60 | 3 ～ 20 | 0 ～ 10 | 12 ～ 24 |
Loading...
Basic Information
| Basic Shape | Small Head | Insertion Guide Tip Type | Tapered | Insertion Guide Specifications | Not Provided |
|---|---|---|---|---|---|
| Mounting Side Shape | Straight (Press-Fit) |
Specification/Dimensions
-
Insertion Guide Tip Shape
-
Round -
Diamond
-
-
Surface Treatment
- Not Provided
- Hard Chrome Plating
-
Heat Treatment
- Not Provided
- Dip Quenching
-
Material
- Steel
- Stainless Steel
- Steel
-
Locating Side Outer Dia. P (Ø)(mm)
-
Locating Side O.D. Tolerance
-
Mounting Side Outer Dia. D(mm)
-
Mounting Side Tolerance
-
A(°)
-
B(mm)
-
E
-
L(mm)
-
type
- CKFSAAA
- CKFSAAB
- CKFSAAG
- CKFSAAH
- CKFSAAM
- CKFSAAP
- CKFSAAS
- CKFSABA
- CKFSABB
- CKFSABG
- CKFSABH
- CKFSABM
- CKFSABP
- CKFSABS
- CKFSAGA
- CKFSAGB
- CKFSAGG
- CKFSAGH
- CKFSAGM
- CKFSAGP
- CKFSAGS
- CKFSAHA
- CKFSAHB
- CKFSAHG
- CKFSAHH
- CKFSAHM
- CKFSAHP
- CKFSAHS
- CKFSAMA
- CKFSAMB
- CKFSAMG
- CKFSAMH
- CKFSAMM
- CKFSAMP
- CKFSAMS
- CKFSAPA
- CKFSAPB
- CKFSAPG
- CKFSAPH
- CKFSAPM
- CKFSAPP
- CKFSAPS
- CKFSDAA
- CKFSDAB
- CKFSDAG
- CKFSDAH
- CKFSDAM
- CKFSDAP
- CKFSDAS
- CKFSDBA
- CKFSDBB
- CKFSDBG
- CKFSDBH
- CKFSDBM
- CKFSDBP
- CKFSDBS
- CKFSDGA
- CKFSDGB
- CKFSDGG
- CKFSDGH
- CKFSDGM
- CKFSDGP
- CKFSDGS
- CKFSDHA
- CKFSDHB
- CKFSDHG
- CKFSDHH
- CKFSDHM
- CKFSDHP
- CKFSDHS
- CKFSDMA
- CKFSDMB
- CKFSDMG
- CKFSDMH
- CKFSDMM
- CKFSDMP
- CKFSDMS
- CKFSDPA
- CKFSDPB
- CKFSDPG
- CKFSDPH
- CKFSDPM
- CKFSDPP
- CKFSDPS
- GKFSAGG
- GKFSAGH
- GKFSAGM
- GKFSAGP
- GKFSAGS
- GKFSAHG
- GKFSAHH
- GKFSAHM
- GKFSAHP
- GKFSAHS
- GKFSAMG
- GKFSAMH
- GKFSAMM
- GKFSAMP
- GKFSAMS
- GKFSAPG
- GKFSAPH
- GKFSAPM
- GKFSAPP
- GKFSAPS
- GKFSDGG
- GKFSDGH
- GKFSDGM
- GKFSDGP
- GKFSDGS
- GKFSDHG
- GKFSDHH
- GKFSDHM
- GKFSDHP
- GKFSDHS
- GKFSDMG
- GKFSDMH
- GKFSDMM
- GKFSDMP
- GKFSDMS
- GKFSDPG
- GKFSDPH
- GKFSDPM
- GKFSDPP
- GKFSDPS
- HKFSAGG
- HKFSAGH
- HKFSAGM
- HKFSAGP
- HKFSAGS
- HKFSAHG
- HKFSAHH
- HKFSAHM
- HKFSAHP
- HKFSAHS
- HKFSAMG
- HKFSAMH
- HKFSAMM
- HKFSAMP
- HKFSAMS
- HKFSAPG
- HKFSAPH
- HKFSAPM
- HKFSAPP
- HKFSAPS
- HKFSDGG
- HKFSDGH
- HKFSDGM
- HKFSDGP
- HKFSDGS
- HKFSDHG
- HKFSDHH
- HKFSDHM
- HKFSDHP
- HKFSDHS
- HKFSDMG
- HKFSDMH
- HKFSDMM
- HKFSDMP
- HKFSDMS
- HKFSDPG
- HKFSDPH
- HKFSDPM
- HKFSDPP
- HKFSDPS
- KFSAAA
- KFSAAB
- KFSAAG
- KFSAAH
- KFSAAM
- KFSAAP
- KFSAAS
- KFSABA
- KFSABB
- KFSABG
- KFSABH
- KFSABM
- KFSABP
- KFSABS
- KFSAGA
- KFSAGB
- KFSAGG
- KFSAGH
- KFSAGM
- KFSAGP
- KFSAGS
- KFSAHA
- KFSAHB
- KFSAHG
- KFSAHH
- KFSAHM
- KFSAHP
- KFSAHS
- KFSAMA
- KFSAMB
- KFSAMG
- KFSAMH
- KFSAMM
- KFSAMP
- KFSAMS
- KFSAPA
- KFSAPB
- KFSAPG
- KFSAPH
- KFSAPM
- KFSAPP
- KFSAPS
- KFSDAA
- KFSDAB
- KFSDAG
- KFSDAH
- KFSDAM
- KFSDAP
- KFSDAS
- KFSDBA
- KFSDBB
- KFSDBG
- KFSDBH
- KFSDBM
- KFSDBP
- KFSDBS
- KFSDGA
- KFSDGB
- KFSDGG
- KFSDGH
- KFSDGM
- KFSDGP
- KFSDGS
- KFSDHA
- KFSDHB
- KFSDHG
- KFSDHH
- KFSDHM
- KFSDHP
- KFSDHS
- KFSDMA
- KFSDMB
- KFSDMG
- KFSDMH
- KFSDMM
- KFSDMP
- KFSDMS
- KFSDPA
- KFSDPB
- KFSDPG
- KFSDPH
- KFSDPM
- KFSDPP
- KFSDPS
- SKFSAAA
- SKFSAAB
- SKFSAAG
- SKFSAAH
- SKFSAAM
- SKFSAAP
- SKFSAAS
- SKFSABA
- SKFSABB
- SKFSABG
- SKFSABH
- SKFSABM
- SKFSABP
- SKFSABS
- SKFSAGA
- SKFSAGB
- SKFSAGG
- SKFSAGH
- SKFSAGM
- SKFSAGP
- SKFSAGS
- SKFSAHA
- SKFSAHB
- SKFSAHG
- SKFSAHH
- SKFSAHM
- SKFSAHP
- SKFSAHS
- SKFSAMA
- SKFSAMB
- SKFSAMG
- SKFSAMH
- SKFSAMM
- SKFSAMP
- SKFSAMS
- SKFSAPA
- SKFSAPB
- SKFSAPG
- SKFSAPH
- SKFSAPM
- SKFSAPP
- SKFSAPS
- SKFSDAA
- SKFSDAB
- SKFSDAG
- SKFSDAH
- SKFSDAM
- SKFSDAP
- SKFSDAS
- SKFSDBA
- SKFSDBB
- SKFSDBG
- SKFSDBH
- SKFSDBM
- SKFSDBP
- SKFSDBS
- SKFSDGA
- SKFSDGB
- SKFSDGG
- SKFSDGH
- SKFSDGM
- SKFSDGP
- SKFSDGS
- SKFSDHA
- SKFSDHB
- SKFSDHG
- SKFSDHH
- SKFSDHM
- SKFSDHP
- SKFSDHS
- SKFSDMA
- SKFSDMB
- SKFSDMG
- SKFSDMH
- SKFSDMM
- SKFSDMP
- SKFSDMS
- SKFSDPA
- SKFSDPB
- SKFSDPG
- SKFSDPH
- SKFSDPM
- SKFSDPP
- SKFSDPS
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 3 Day(s) or Less
- 4 Day(s) or Less
- 5 Day(s) or Less
- 6 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Locating Pins - Sphere Large Head (Tapped)
- Locating Pins - Small Head, Round Tapered - Threaded
- Locating Pins - Air Vent, Threaded
- Locating Pins Double Stepped - Press Fit
- Locating Pins for Grippers - Counterbored
- Locating Pins Large Head, Tapered, Configurable - Taper Angle, Tolerance Selectable, Press Fit
- Locating Pins Large Head, Round Tapered, Tapped
- Diamond Pin (BJ722)
Complementary Products
-
Locating Pins for Fixtures - Standard Grade, Shouldered - Threaded
MISUMI Days to Ship : 6 Day(s) or more
Customers Who Viewed This Item Also Viewed
-
-
-
Locating Pins - Sphere Small Head (D,P Tolerance Selectable-Press Fit)MISUMI
Days to Ship : 3 Day(s) or more
-
-
-
-
-
-
-
-
-
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy