[Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
[Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Locating Pins - Tapped (Part Numbers)

Volume Discount

MISUMI

Large Flat Head with each dimension configurable. The tolerances on both ends are also configurable.

Part Number

Configured Part Number is shown.

[ ! ]SUS440C or 13Cr stainless has an identification groove at any position on D part.
[ ! ]Polishing and centering hole sometimes not available for SUS304.

Material No.	[ M ]Material	[ S ]Surface Treatment	[ H ]Hardness	Type
Material No.	[ M ]Material	[ S ]Surface Treatment	[ H ]Hardness	Tapped
(1)	SKS3 Equivalent	-	Treated Hardness: 60 ~ 63HRC	KFFTA
(2)	SKS3 Equivalent	Hard Chrome Plating	Treated Hardness: 50 ~ 55HRC Plating Hardness: 750HV ~	GKFFTA
(3)	SKS3 Equivalent	-	-	BKFFTA
(4)	SUS304	-	-	SKFFTA
(5)	SUS440C or 13Cr stainless	-	Treated Hardness: 50 ~ 55HRC	CKFFTA

Specifications

Part Number

Type

D Tol.

P Tol.

KFFTA

P8.00

B6.0

■Tolerance Selection

D or P	Standard Grade
	M	P	G	H	S
	m6	p6	g6	h7	-
3.00	+0.008 +0.002	+0.012 +0.006	-0.002 -0.008	0 -0.010	0 -0.01
3.50 ~ 6.00	+0.012 +0.004	+0.020 +0.012	-0.004 -0.012	0 -0.012
6.01 ~ 10.00	+0.015 +0.006	+0.024 +0.015	-0.005 -0.014	0 -0.015
10.01 ~ 18.00	+0.018 +0.007	+0.029 +0.018	-0.006 -0.017	0 -0.018
18.01 ~ 30.00	+0.021 +0.008	+0.035 +0.022	-0.007 -0.020	0 -0.021

■Tapped

Part Number				P 0.01mm Increment	L 1mm Increment	B 0.1mm Increment	M (Coarse)	^* Tightening Torque N • cm	ℓ	C
Type	D Tolerance Selection	P Tolerance Selection	D	P 0.01mm Increment	L 1mm Increment	B 0.1mm Increment	M (Coarse)	^* Tightening Torque N • cm	ℓ	C
KFFTA GKFFTA BKFFTA SKFFTA CKFFTA	M P G H	S M P G H	6	6.50~10.00	6~12	1.5~15.0	M3	98	5	1
			6T	6.50~10.00	6~12	1.5~15.0	M2.6	-	4	1
			8	8.50~15.00	8~16	1.5~30.0	M5	461	8	1.5
			8T	8.50~15.00	6~12	1.5~30.0	M4	225	6	1.5
			10	11.00~17.00	10~20	3.0~30.0	M5	461	8	2
			10T	11.00~17.00	6~16	3.0~30.0	M4	225	6	2
			12	13.00~18.00	12~24	3.0~30.0	M5	461	8	2
			12T	13.00~18.00	8~18	3.0~30.0	M4	225	6	2
			13	14.00~20.00	13~26	5.0~30.0	M8	1911	10	3
			13T	14.00~20.00	8~20	5.0~30.0	M6	784	9	3
			16	17.00~27.00	16~32	5.0~35.0	M8	1911	12	3
			16T	17.00~27.00	10~24	5.0~35.0	M6	784	9	3
			20	22.00~30.00	20~40	5.0~40.0	M8	1911	12	3
			20T	22.00~30.00	12~30	5.0~40.0	M6	784	9	3

[ ! ]Pins of D dimension with T have one size smaller thread diameter and larger wall thickness. (Actual D dimension is the number without "T".)
[ ! ]Note the strength of under-head part >> P.1618 [ ! ]Please confirm Pilot Hole Depth (>> P.1618). Holes may go through.
*The tightening torque (ref. value) for hardened products is strength class 8.8. (See technical data on >>P.2365.) Not applicable when using locking materials or lock washers.

Alterations

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 60; 90

Part Number
KFFTAGG20-P[22-30/0.01]-L[20-40/1]-B[5-40/0.1]
KFFTAGG20T-P[22-30/0.01]-L[12-30/1]-B[5-40/0.1]
KFFTAHG6-P[6.5-10/0.01]-L[6-12/1]-B[2-12/0.1]
KFFTAHG6T-P[6.5-10/0.01]-L[6-12/1]-B[2-12/0.1]
KFFTAHG8-P[9-13/0.01]-L[8-16/1]-B[2-15/0.1]
KFFTAHG8T-P[8.5-15/0.01]-L[6-12/1]-B[1-30/0.1]
KFFTAHG10-P[11-15/0.01]-L[10-20/1]-B[2-20/0.1]
KFFTAHG10T-P[11-15/0.01]-L[6-16/1]-B[3-20/0.1]
KFFTAHG12-P[13-16/0.01]-L[12-24/1]-B[2-30/0.1]
KFFTAHG12T-P[13-16/0.01]-L[8-18/1]-B[3-30/0.1]
KFFTAHG13-P[14-18/0.01]-L[13-26/1]-B[2-30/0.1]
KFFTAHG13T-P[14-18/0.01]-L[8-20/1]-B[5-30/0.1]
KFFTAHG16-P[17-25/0.01]-L[16-32/1]-B[5-35/0.1]
KFFTAHG16T-P[17-25/0.01]-L[10-24/1]-B[5-35/0.1]
KFFTAHG20-P[22-30/0.01]-L[20-40/1]-B[5-40/0.1]
KFFTAHG20T-P[22-30/0.01]-L[12-30/1]-B[5-40/0.1]
KFFTAMG6-P[6.5-10/0.01]-L[6-12/1]-B[2-12/0.1]
KFFTAMG6T-P[6.5-10/0.01]-L[6-12/1]-B[2-12/0.1]
KFFTAMG8-P[9-13/0.01]-L[8-16/1]-B[2-15/0.1]
KFFTAMG8T-P[8.5-15/0.01]-L[6-12/1]-B[1-30/0.1]
KFFTAMG10-P[11-15/0.01]-L[10-20/1]-B[2-20/0.1]
KFFTAMG10T-P[11-15/0.01]-L[6-16/1]-B[3-20/0.1]
KFFTAMG12-P[13-16/0.01]-L[12-24/1]-B[2-30/0.1]
KFFTAMG12T-P[13-16/0.01]-L[8-18/1]-B[3-30/0.1]
KFFTAMG13-P[14-18/0.01]-L[13-26/1]-B[2-30/0.1]
KFFTAMG13T-P[14-18/0.01]-L[8-20/1]-B[5-30/0.1]
KFFTAMG16-P[17-25/0.01]-L[16-32/1]-B[5-35/0.1]
KFFTAMG16T-P[17-25/0.01]-L[10-24/1]-B[5-35/0.1]
KFFTAMG20-P[22-30/0.01]-L[20-40/1]-B[5-40/0.1]
KFFTAMG20T-P[22-30/0.01]-L[12-30/1]-B[5-40/0.1]
KFFTAPG6-P[6.5-10/0.01]-L[6-12/1]-B[2-12/0.1]
KFFTAPG6T-P[6.5-10/0.01]-L[6-12/1]-B[2-12/0.1]
KFFTAPG8-P[9-13/0.01]-L[8-16/1]-B[2-15/0.1]
KFFTAPG8T-P[8.5-15/0.01]-L[6-12/1]-B[1-30/0.1]
KFFTAPG10-P[11-15/0.01]-L[10-20/1]-B[2-20/0.1]
KFFTAPG10T-P[11-15/0.01]-L[6-16/1]-B[3-20/0.1]
KFFTAPG12-P[13-16/0.01]-L[12-24/1]-B[2-30/0.1]
KFFTAPG12T-P[13-16/0.01]-L[8-18/1]-B[3-30/0.1]
KFFTAPG13-P[14-18/0.01]-L[13-26/1]-B[2-30/0.1]
KFFTAPG13T-P[14-18/0.01]-L[8-20/1]-B[5-30/0.1]
KFFTAPG16-P[17-25/0.01]-L[16-32/1]-B[5-35/0.1]
KFFTAPG16T-P[17-25/0.01]-L[10-24/1]-B[5-35/0.1]
KFFTAPG20-P[22-30/0.01]-L[20-40/1]-B[5-40/0.1]
KFFTAPG20T-P[22-30/0.01]-L[12-30/1]-B[5-40/0.1]
SKFFTAGG6-P[6.5-10/0.01]-L[6-12/1]-B[2-12/0.1]
SKFFTAGG6T-P[6.5-10/0.01]-L[6-12/1]-B[2-12/0.1]
SKFFTAGG8-P[9-13/0.01]-L[8-16/1]-B[2-15/0.1]
SKFFTAGG8T-P[9-13/0.01]-L[6-12/1]-B[2-15/0.1]
SKFFTAGG10-P[11-15/0.01]-L[10-20/1]-B[2-20/0.1]
SKFFTAGG10T-P[11-15/0.01]-L[6-16/1]-B[3-20/0.1]
SKFFTAGG12-P[13-16/0.01]-L[12-24/1]-B[2-30/0.1]
SKFFTAGG12T-P[13-16/0.01]-L[8-18/1]-B[3-30/0.1]
SKFFTAGG13-P[14-18/0.01]-L[13-26/1]-B[2-30/0.1]
SKFFTAGG13T-P[14-18/0.01]-L[8-20/1]-B[5-30/0.1]
SKFFTAGG16-P[17-25/0.01]-L[16-32/1]-B[5-35/0.1]
SKFFTAGG16T-P[17-25/0.01]-L[10-24/1]-B[5-35/0.1]
SKFFTAGG20-P[22-30/0.01]-L[20-40/1]-B[5-40/0.1]
SKFFTAGG20T-P[22-30/0.01]-L[12-30/1]-B[5-40/0.1]
SKFFTAHG6-P[6.5-10/0.01]-L[6-12/1]-B[2-12/0.1]
SKFFTAHG6T-P[6.5-10/0.01]-L[6-12/1]-B[2-12/0.1]
SKFFTAHG8-P[9-13/0.01]-L[8-16/1]-B[2-15/0.1]
SKFFTAHG8T-P[9-13/0.01]-L[6-12/1]-B[2-15/0.1]
SKFFTAHG10-P[11-15/0.01]-L[10-20/1]-B[2-20/0.1]
SKFFTAHG10T-P[11-15/0.01]-L[6-16/1]-B[3-20/0.1]
SKFFTAHG12-P[13-16/0.01]-L[12-24/1]-B[2-30/0.1]
SKFFTAHG12T-P[13-16/0.01]-L[8-18/1]-B[3-30/0.1]
SKFFTAHG13-P[14-18/0.01]-L[13-26/1]-B[2-30/0.1]
SKFFTAHG13T-P[14-18/0.01]-L[8-20/1]-B[5-30/0.1]
SKFFTAHG16-P[17-25/0.01]-L[16-32/1]-B[5-35/0.1]
SKFFTAHG16T-P[17-25/0.01]-L[10-24/1]-B[5-35/0.1]
SKFFTAHG20-P[22-30/0.01]-L[20-40/1]-B[5-40/0.1]
SKFFTAHG20T-P[22-30/0.01]-L[12-30/1]-B[5-40/0.1]
SKFFTAMG6-P[6.5-10/0.01]-L[6-12/1]-B[2-12/0.1]
SKFFTAMG6T-P[6.5-10/0.01]-L[6-12/1]-B[2-12/0.1]
SKFFTAMG8-P[9-13/0.01]-L[8-16/1]-B[2-15/0.1]
SKFFTAMG8T-P[9-13/0.01]-L[6-12/1]-B[2-15/0.1]
SKFFTAMG10-P[11-15/0.01]-L[10-20/1]-B[2-20/0.1]
SKFFTAMG10T-P[11-15/0.01]-L[6-16/1]-B[3-20/0.1]
SKFFTAMG12-P[13-16/0.01]-L[12-24/1]-B[2-30/0.1]
SKFFTAMG12T-P[13-16/0.01]-L[8-18/1]-B[3-30/0.1]
SKFFTAMG13-P[14-18/0.01]-L[13-26/1]-B[2-30/0.1]
SKFFTAMG13T-P[14-18/0.01]-L[8-20/1]-B[5-30/0.1]
SKFFTAMG16-P[17-25/0.01]-L[16-32/1]-B[5-35/0.1]
SKFFTAMG16T-P[17-25/0.01]-L[10-24/1]-B[5-35/0.1]
SKFFTAMG20-P[22-30/0.01]-L[20-40/1]-B[5-40/0.1]
SKFFTAMG20T-P[22-30/0.01]-L[12-30/1]-B[5-40/0.1]
SKFFTAPG6-P[6.5-10/0.01]-L[6-12/1]-B[2-12/0.1]
SKFFTAPG6T-P[6.5-10/0.01]-L[6-12/1]-B[2-12/0.1]
SKFFTAPG8-P[9-13/0.01]-L[8-16/1]-B[2-15/0.1]
SKFFTAPG8T-P[9-13/0.01]-L[6-12/1]-B[2-15/0.1]

Standard Unit Price	Minimum order quantity	Days to Ship	RoHS	Surface Treatment	Heat Treatment	Material	Locating Side O.D. Tolerance	Mounting Side Outer Dia. D (mm)	Mounting Side Tolerance	Screw Dia. M (mm)	B	L
-	1 Piece(s)	3 Day(s)	10	Not Provided	Dip Quenching	[Steel] SKS3 Equivalent	g6	20	g6	8	5 ～ 40	20 ～ 40
-	1 Piece(s)	3 Day(s)	10	Not Provided	Dip Quenching	[Steel] SKS3 Equivalent	g6	20T	g6	6	5 ～ 40	12 ～ 30
-	1 Piece(s)	3 Day(s)	10	Not Provided	Dip Quenching	[Steel] SKS3 Equivalent	g6	6	h7	3	2 ～ 12	6 ～ 12
-	1 Piece(s)	3 Day(s)	10	Not Provided	Dip Quenching	[Steel] SKS3 Equivalent	g6	6T	h7	2.6	2 ～ 12	6 ～ 12
-	1 Piece(s)	3 Day(s)	10	Not Provided	Dip Quenching	[Steel] SKS3 Equivalent	g6	8	h7	5	2 ～ 15	8 ～ 16
-	1 Piece(s)	3 Day(s)	10	Not Provided	Dip Quenching	[Steel] SKS3 Equivalent	g6	8T	h7	4	1 ～ 30	6 ～ 12
-	1 Piece(s)	3 Day(s)	10	Not Provided	Dip Quenching	[Steel] SKS3 Equivalent	g6	10	h7	5	2 ～ 20	10 ～ 20
-	1 Piece(s)	3 Day(s)	10	Not Provided	Dip Quenching	[Steel] SKS3 Equivalent	g6	10T	h7	4	3 ～ 20	6 ～ 16
-	1 Piece(s)	3 Day(s)	10	Not Provided	Dip Quenching	[Steel] SKS3 Equivalent	g6	12	h7	5	2 ～ 30	12 ～ 24
-	1 Piece(s)	3 Day(s)	10	Not Provided	Dip Quenching	[Steel] SKS3 Equivalent	g6	12T	h7	4	3 ～ 30	8 ～ 18
-	1 Piece(s)	3 Day(s)	10	Not Provided	Dip Quenching	[Steel] SKS3 Equivalent	g6	13	h7	8	2 ～ 30	13 ～ 26
-	1 Piece(s)	3 Day(s)	10	Not Provided	Dip Quenching	[Steel] SKS3 Equivalent	g6	13T	h7	6	5 ～ 30	8 ～ 20
-	1 Piece(s)	3 Day(s)	10	Not Provided	Dip Quenching	[Steel] SKS3 Equivalent	g6	16	h7	8	5 ～ 35	16 ～ 32
-	1 Piece(s)	3 Day(s)	10	Not Provided	Dip Quenching	[Steel] SKS3 Equivalent	g6	16T	h7	6	5 ～ 35	10 ～ 24
-	1 Piece(s)	3 Day(s)	10	Not Provided	Dip Quenching	[Steel] SKS3 Equivalent	g6	20	h7	8	5 ～ 40	20 ～ 40
-	1 Piece(s)	3 Day(s)	10	Not Provided	Dip Quenching	[Steel] SKS3 Equivalent	g6	20T	h7	6	5 ～ 40	12 ～ 30
-	1 Piece(s)	3 Day(s)	10	Not Provided	Dip Quenching	[Steel] SKS3 Equivalent	g6	6	m6	3	2 ～ 12	6 ～ 12
-	1 Piece(s)	3 Day(s)	10	Not Provided	Dip Quenching	[Steel] SKS3 Equivalent	g6	6T	m6	2.6	2 ～ 12	6 ～ 12
-	1 Piece(s)	3 Day(s)	10	Not Provided	Dip Quenching	[Steel] SKS3 Equivalent	g6	8	m6	5	2 ～ 15	8 ～ 16
-	1 Piece(s)	3 Day(s)	10	Not Provided	Dip Quenching	[Steel] SKS3 Equivalent	g6	8T	m6	4	1 ～ 30	6 ～ 12
-	1 Piece(s)	3 Day(s)	10	Not Provided	Dip Quenching	[Steel] SKS3 Equivalent	g6	10	m6	5	2 ～ 20	10 ～ 20
-	1 Piece(s)	3 Day(s)	10	Not Provided	Dip Quenching	[Steel] SKS3 Equivalent	g6	10T	m6	4	3 ～ 20	6 ～ 16
-	1 Piece(s)	3 Day(s)	10	Not Provided	Dip Quenching	[Steel] SKS3 Equivalent	g6	12	m6	5	2 ～ 30	12 ～ 24
-	1 Piece(s)	3 Day(s)	10	Not Provided	Dip Quenching	[Steel] SKS3 Equivalent	g6	12T	m6	4	3 ～ 30	8 ～ 18
-	1 Piece(s)	3 Day(s)	10	Not Provided	Dip Quenching	[Steel] SKS3 Equivalent	g6	13	m6	8	2 ～ 30	13 ～ 26
-	1 Piece(s)	3 Day(s)	10	Not Provided	Dip Quenching	[Steel] SKS3 Equivalent	g6	13T	m6	6	5 ～ 30	8 ～ 20
-	1 Piece(s)	3 Day(s)	10	Not Provided	Dip Quenching	[Steel] SKS3 Equivalent	g6	16	m6	8	5 ～ 35	16 ～ 32
-	1 Piece(s)	3 Day(s)	10	Not Provided	Dip Quenching	[Steel] SKS3 Equivalent	g6	16T	m6	6	5 ～ 35	10 ～ 24
-	1 Piece(s)	3 Day(s)	10	Not Provided	Dip Quenching	[Steel] SKS3 Equivalent	g6	20	m6	8	5 ～ 40	20 ～ 40
-	1 Piece(s)	3 Day(s)	10	Not Provided	Dip Quenching	[Steel] SKS3 Equivalent	g6	20T	m6	6	5 ～ 40	12 ～ 30
-	1 Piece(s)	3 Day(s)	10	Not Provided	Dip Quenching	[Steel] SKS3 Equivalent	g6	6	p6	3	2 ～ 12	6 ～ 12
-	1 Piece(s)	3 Day(s)	10	Not Provided	Dip Quenching	[Steel] SKS3 Equivalent	g6	6T	p6	2.6	2 ～ 12	6 ～ 12
-	1 Piece(s)	3 Day(s)	10	Not Provided	Dip Quenching	[Steel] SKS3 Equivalent	g6	8	p6	5	2 ～ 15	8 ～ 16
-	1 Piece(s)	3 Day(s)	10	Not Provided	Dip Quenching	[Steel] SKS3 Equivalent	g6	8T	p6	4	1 ～ 30	6 ～ 12
-	1 Piece(s)	3 Day(s)	10	Not Provided	Dip Quenching	[Steel] SKS3 Equivalent	g6	10	p6	5	2 ～ 20	10 ～ 20
-	1 Piece(s)	3 Day(s)	10	Not Provided	Dip Quenching	[Steel] SKS3 Equivalent	g6	10T	p6	4	3 ～ 20	6 ～ 16
-	1 Piece(s)	3 Day(s)	10	Not Provided	Dip Quenching	[Steel] SKS3 Equivalent	g6	12	p6	5	2 ～ 30	12 ～ 24
-	1 Piece(s)	3 Day(s)	10	Not Provided	Dip Quenching	[Steel] SKS3 Equivalent	g6	12T	p6	4	3 ～ 30	8 ～ 18
-	1 Piece(s)	3 Day(s)	10	Not Provided	Dip Quenching	[Steel] SKS3 Equivalent	g6	13	p6	8	2 ～ 30	13 ～ 26
-	1 Piece(s)	3 Day(s)	10	Not Provided	Dip Quenching	[Steel] SKS3 Equivalent	g6	13T	p6	6	5 ～ 30	8 ～ 20
-	1 Piece(s)	3 Day(s)	10	Not Provided	Dip Quenching	[Steel] SKS3 Equivalent	g6	16	p6	8	5 ～ 35	16 ～ 32
-	1 Piece(s)	3 Day(s)	10	Not Provided	Dip Quenching	[Steel] SKS3 Equivalent	g6	16T	p6	6	5 ～ 35	10 ～ 24
-	1 Piece(s)	3 Day(s)	10	Not Provided	Dip Quenching	[Steel] SKS3 Equivalent	g6	20	p6	8	5 ～ 40	20 ～ 40
-	1 Piece(s)	3 Day(s)	10	Not Provided	Dip Quenching	[Steel] SKS3 Equivalent	g6	20T	p6	6	5 ～ 40	12 ～ 30
-	1 Piece(s)	3 Day(s)	10	Not Provided	Not Provided	[Stainless Steel] SUS304	g6	6	g6	3	2 ～ 12	6 ～ 12
-	1 Piece(s)	3 Day(s)	10	Not Provided	Not Provided	[Stainless Steel] SUS304	g6	6T	g6	2.6	2 ～ 12	6 ～ 12
-	1 Piece(s)	3 Day(s)	10	Not Provided	Not Provided	[Stainless Steel] SUS304	g6	8	g6	5	2 ～ 15	8 ～ 16
-	1 Piece(s)	3 Day(s)	10	Not Provided	Not Provided	[Stainless Steel] SUS304	g6	8T	g6	4	2 ～ 15	6 ～ 12
-	1 Piece(s)	3 Day(s)	10	Not Provided	Not Provided	[Stainless Steel] SUS304	g6	10	g6	5	2 ～ 20	10 ～ 20
-	1 Piece(s)	3 Day(s)	10	Not Provided	Not Provided	[Stainless Steel] SUS304	g6	10T	g6	4	3 ～ 20	6 ～ 16
-	1 Piece(s)	3 Day(s)	10	Not Provided	Not Provided	[Stainless Steel] SUS304	g6	12	g6	5	2 ～ 30	12 ～ 24
-	1 Piece(s)	3 Day(s)	10	Not Provided	Not Provided	[Stainless Steel] SUS304	g6	12T	g6	4	3 ～ 30	8 ～ 18
-	1 Piece(s)	3 Day(s)	10	Not Provided	Not Provided	[Stainless Steel] SUS304	g6	13	g6	8	2 ～ 30	13 ～ 26
-	1 Piece(s)	3 Day(s)	10	Not Provided	Not Provided	[Stainless Steel] SUS304	g6	13T	g6	6	5 ～ 30	8 ～ 20
-	1 Piece(s)	3 Day(s)	10	Not Provided	Not Provided	[Stainless Steel] SUS304	g6	16	g6	8	5 ～ 35	16 ～ 32
-	1 Piece(s)	3 Day(s)	10	Not Provided	Not Provided	[Stainless Steel] SUS304	g6	16T	g6	6	5 ～ 35	10 ～ 24
-	1 Piece(s)	3 Day(s)	10	Not Provided	Not Provided	[Stainless Steel] SUS304	g6	20	g6	8	5 ～ 40	20 ～ 40
-	1 Piece(s)	3 Day(s)	10	Not Provided	Not Provided	[Stainless Steel] SUS304	g6	20T	g6	6	5 ～ 40	12 ～ 30
-	1 Piece(s)	3 Day(s)	10	Not Provided	Not Provided	[Stainless Steel] SUS304	g6	6	h7	3	2 ～ 12	6 ～ 12
-	1 Piece(s)	3 Day(s)	10	Not Provided	Not Provided	[Stainless Steel] SUS304	g6	6T	h7	2.6	2 ～ 12	6 ～ 12
-	1 Piece(s)	3 Day(s)	10	Not Provided	Not Provided	[Stainless Steel] SUS304	g6	8	h7	5	2 ～ 15	8 ～ 16
-	1 Piece(s)	3 Day(s)	10	Not Provided	Not Provided	[Stainless Steel] SUS304	g6	8T	h7	4	2 ～ 15	6 ～ 12
-	1 Piece(s)	3 Day(s)	10	Not Provided	Not Provided	[Stainless Steel] SUS304	g6	10	h7	5	2 ～ 20	10 ～ 20
-	1 Piece(s)	3 Day(s)	10	Not Provided	Not Provided	[Stainless Steel] SUS304	g6	10T	h7	4	3 ～ 20	6 ～ 16
-	1 Piece(s)	3 Day(s)	10	Not Provided	Not Provided	[Stainless Steel] SUS304	g6	12	h7	5	2 ～ 30	12 ～ 24
-	1 Piece(s)	3 Day(s)	10	Not Provided	Not Provided	[Stainless Steel] SUS304	g6	12T	h7	4	3 ～ 30	8 ～ 18
-	1 Piece(s)	3 Day(s)	10	Not Provided	Not Provided	[Stainless Steel] SUS304	g6	13	h7	8	2 ～ 30	13 ～ 26
-	1 Piece(s)	3 Day(s)	10	Not Provided	Not Provided	[Stainless Steel] SUS304	g6	13T	h7	6	5 ～ 30	8 ～ 20
-	1 Piece(s)	3 Day(s)	10	Not Provided	Not Provided	[Stainless Steel] SUS304	g6	16	h7	8	5 ～ 35	16 ～ 32
-	1 Piece(s)	3 Day(s)	10	Not Provided	Not Provided	[Stainless Steel] SUS304	g6	16T	h7	6	5 ～ 35	10 ～ 24
-	1 Piece(s)	3 Day(s)	10	Not Provided	Not Provided	[Stainless Steel] SUS304	g6	20	h7	8	5 ～ 40	20 ～ 40
-	1 Piece(s)	3 Day(s)	10	Not Provided	Not Provided	[Stainless Steel] SUS304	g6	20T	h7	6	5 ～ 40	12 ～ 30
-	1 Piece(s)	3 Day(s)	10	Not Provided	Not Provided	[Stainless Steel] SUS304	g6	6	m6	3	2 ～ 12	6 ～ 12
-	1 Piece(s)	3 Day(s)	10	Not Provided	Not Provided	[Stainless Steel] SUS304	g6	6T	m6	2.6	2 ～ 12	6 ～ 12
-	1 Piece(s)	3 Day(s)	10	Not Provided	Not Provided	[Stainless Steel] SUS304	g6	8	m6	5	2 ～ 15	8 ～ 16
-	1 Piece(s)	3 Day(s)	10	Not Provided	Not Provided	[Stainless Steel] SUS304	g6	8T	m6	4	2 ～ 15	6 ～ 12
-	1 Piece(s)	3 Day(s)	10	Not Provided	Not Provided	[Stainless Steel] SUS304	g6	10	m6	5	2 ～ 20	10 ～ 20
-	1 Piece(s)	3 Day(s)	10	Not Provided	Not Provided	[Stainless Steel] SUS304	g6	10T	m6	4	3 ～ 20	6 ～ 16
-	1 Piece(s)	3 Day(s)	10	Not Provided	Not Provided	[Stainless Steel] SUS304	g6	12	m6	5	2 ～ 30	12 ～ 24
-	1 Piece(s)	3 Day(s)	10	Not Provided	Not Provided	[Stainless Steel] SUS304	g6	12T	m6	4	3 ～ 30	8 ～ 18
-	1 Piece(s)	3 Day(s)	10	Not Provided	Not Provided	[Stainless Steel] SUS304	g6	13	m6	8	2 ～ 30	13 ～ 26
-	1 Piece(s)	3 Day(s)	10	Not Provided	Not Provided	[Stainless Steel] SUS304	g6	13T	m6	6	5 ～ 30	8 ～ 20
-	1 Piece(s)	3 Day(s)	10	Not Provided	Not Provided	[Stainless Steel] SUS304	g6	16	m6	8	5 ～ 35	16 ～ 32
-	1 Piece(s)	3 Day(s)	10	Not Provided	Not Provided	[Stainless Steel] SUS304	g6	16T	m6	6	5 ～ 35	10 ～ 24
-	1 Piece(s)	3 Day(s)	10	Not Provided	Not Provided	[Stainless Steel] SUS304	g6	20	m6	8	5 ～ 40	20 ～ 40
-	1 Piece(s)	3 Day(s)	10	Not Provided	Not Provided	[Stainless Steel] SUS304	g6	20T	m6	6	5 ～ 40	12 ～ 30
-	1 Piece(s)	3 Day(s)	10	Not Provided	Not Provided	[Stainless Steel] SUS304	g6	6	p6	3	2 ～ 12	6 ～ 12
-	1 Piece(s)	3 Day(s)	10	Not Provided	Not Provided	[Stainless Steel] SUS304	g6	6T	p6	2.6	2 ～ 12	6 ～ 12
-	1 Piece(s)	3 Day(s)	10	Not Provided	Not Provided	[Stainless Steel] SUS304	g6	8	p6	5	2 ～ 15	8 ～ 16
-	1 Piece(s)	3 Day(s)	10	Not Provided	Not Provided	[Stainless Steel] SUS304	g6	8T	p6	4	2 ～ 15	6 ～ 12

Product TOP

Basic Information

Basic Shape	Large Head	Insertion Guide Tip Shape	Round	Insertion Guide Tip Type	Flat
Insertion Guide Specifications	Not Provided	Mounting Side Shape	Tapped

Configure

280 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Surface Treatment
- Not Provided
- Hard Chrome Plating
  - Hard Chrome Plating
Clear
Heat Treatment
- Not Provided
- Dip Quenching
Clear
Material
- Steel
  - SKS3 Equivalent
- Stainless Steel
  - SUS304
  - SUS440C or Equivalent
Clear
Mounting Side Outer Dia. D(mm)
6

6T

8

8T

10

10T

12

12T

13

13T

16

16T

20

20T
Clear
Mounting Side Tolerance
p6

m6

h7

g6
Clear
Screw Dia. M(mm)
2.6

3

4

5

6

8
Clear
B
[1-40/0.1]
Clear
L
[6-40/1]
Clear
type
- BKFFTA□□
- CKFFTA□□
- GKFFTA□□
- KFFTA□□
- SKFFTA□□
Clear
Locating Side O.D. Tolerance
p6

m6

h7

g6

0/-0.01
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

3 Day(s) or Less

4 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Additional Products in this Category

Complementary Products

Height Adjusting Pins - Hex - Threaded - High Accuracy
MISUMI Days to Ship : 7 Day(s)
Stop Pins - Press-Fit Type
MISUMI Days to Ship : 1 Day(s) or more
Locating Pins for Fixtures - Standard Grade, Shouldered - Threaded
MISUMI Days to Ship : 6 Day(s) or more

Customers Who Viewed This Item Also Viewed

Locating Pins - Large Flat Head - Side Locating - Tapped
MISUMI

Days to Ship : 3 Day(s) or more
Locating Pins - Press Fit
MISUMI

Days to Ship : 3 Day(s) or more
Locating Pins - Shouldered - Tapered, Shoulder Thickness Configurable - Tapped
MISUMI

Days to Ship : 3 Day(s) or more
Locating Pins - Small Flat Head (D,P Tolerance Selectable-Tapped)
MISUMI

Days to Ship : 3 Day(s) or more
Locating Pins - Sphere Small Head (D,P Tolerance Selectable-Tapped)
MISUMI

Days to Ship : 3 Day(s) or more
Locating Pins - High Hardness Stainless Steel, Large Flat Head (Tapped)
MISUMI

Days to Ship : 6 Day(s) or more
Locating Pins - Air Vent, Threaded
MISUMI

Days to Ship : 3 Day(s) or more
Locating Pins - Large Flat Head - Side Locating - Press Fit
MISUMI

Days to Ship : 3 Day(s) or more
Locating Pins for Grippers - Tapped
MISUMI

Days to Ship : 3 Day(s) or more

back next

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations): Tel：(60) 3 7890 6399; 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday); Technical Inquiry

How can we improve?

Locating Pins - Tapped (Part Numbers)

Specifications

Alterations

Part Number

Basic Information

Configure

Specification/Dimensions

Surface Treatment

Heat Treatment

Material

Mounting Side Outer Dia. D(mm)

Mounting Side Tolerance

Screw Dia. M(mm)

B

L

type

Locating Side O.D. Tolerance

CAD

Days to Ship

Specify Alterations

Additional Products in this Category

Complementary Products

Customers Who Viewed This Item Also Viewed

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm