(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Webcode Seach | Series
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

Loading

  • [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

  • How can we improve?

    How can we improve?

    Comments
    Name (Optional)
    E-mail Address (Optional)
    Tel (Optional)

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Customer Privacy Policy

    Thank you for your cooperation.

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Please use the inquiry form.

    Customer Privacy Policy

Locating Pins - Shouldered - Tapered, Shoulder Thickness Configurable - Press Fit (Part Numbers)

Locating Pins - Shouldered - Tapered, Shoulder Thickness Configurable - Press Fit

MISUMI

MISUMI

- Locating Pins - Shouldered - Tapered, Shoulder Thickness Configurable - Press Fit from MISUMI.
- Sphere Large Head with each dimension configurable. The tolerances on both ends are also configurable.
- The material of pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- Hard Chrome Plating and buff finished products are not available in Precision Grade Tolerance.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- Polishing and centering hole is sometimes not available for SUS304.
- When the P dimension is small, a centering hole will cause the sphere section to become small.

(i)Caution

  • The appearances of some products may be changed starting from August 2025. See the link below for details.
    Information on Locating Pin Appearance Change
  • Please check the content on our website as the PDF does not contain the most up-to-date information.

PDFP.1-1647-2015

Part Number

Configured Part Number is shown.

● Press Fit
(Round) (Diamond) [ ! ]When D=P
(1) Round Shape has no relief.
(i) When D=P and tolerances are different
(ii) When D=P and tolerances are the same
(L+B) is general tolerance. (2) Diamond Shape has a relief. When D<3
a＝0.5
d＝D－0.1 When D≥3
a＝1.0
d＝D－0.2 [ ! ]Relief dimension is a reference value.

[ ! ]Straight Sphere Type for which D=P is standardized is also available.

Material
No.		[ M ]Material[ S ]Surface Treatment[ H ]HardnessType
RoundDiamond
(1)SKS3 Equivalent-Treated Hardness: 60~63HRCKFQAKFQD
(2)SKS3 EquivalentHard Chrome PlatingTreated Hardness: 50~55HRC /
Plating Hardness: 750HV ~		GKFQAGKFQD
(3)SUS304--SKFQASKFQD
(4)SUS304Hard Chrome PlatingPlating Hardness: 750HV ~HKFQAHKFQD
(5)SUS440C or 13Cr stainless-Treated Hardness: 50~55HRCCKFQACKFQD
(7)SKS3 EquivalentBuffingTreated Hardness: 60~63HRCMKFQAMKFQD
(8)SKS3 EquivalentHard Chrome Plating + BuffingTreated Hardness: 50~55HRC /
Plating Hardness: 750HV ~		MGKFQAMGKFQD

Specifications

Part Number-P-L-B
         
Type Shape D Tol. P Tol. D
KFQ A M S 6-P8.00-L8-B6.0

■Tolerance Selection
D
or
P		Standard GradePrecision Grade
MPGHSAB
m6p6g6h7---
1.00
~
3.00		+0.008
+0.002		+0.012
+0.006		-0.002
-0.008		0
-0.010		0
-0.01		+0.005
0		0
-0.005
3.01
~
6.00		+0.012
+0.004		+0.020
+0.012		-0.004
-0.012		0
-0.012
6.01
~
10.00		+0.015
+0.006		+0.024
+0.015		-0.005
-0.014		0
-0.015
10.01
~
18.00		+0.018
+0.007		+0.029
+0.018		-0.006
-0.017		0
-0.018
18.01
~
30.00		+0.021
+0.008		+0.035
+0.022		-0.007
-0.020		0
-0.021
[ ! ]Precision Type Unit Price: Standard Type Price x 1.1
[ NG ]Hard Chrome Plating and buff finished products are not available in Precision Grade Tolerance.
[ ! ]SUS440C or 13Cr stainless has an identification groove at any position on D part.
[ ! ]Polishing and centering hole may not be provided.
[ ! ]When the P dimension is small, a centering hole will cause the sphere section to become small.
[ ! ]The spherical head may be polished.

■Press Fit
Part NumberP
0.01mm Increment		L
1mm Increment		B
0.1mm Increment		C(W)
TypeShapeD Tolerance SelectionP Tolerance SelectionD
KFQ
GKFQ*
SKFQ
HKFQ*
CKFQ		(Buff Finished)
MKFQ*
MGKFQ*
[ ! ]Applicable to D≥5		A (Round)

D (Diamond)		M
P
G
H
*A
*B		S
M
P
G
H
*A
*B		11.00~3.00(2.50)2, 32.0~5.00.1-
22.00~6.00(4.00)2~62.0~15.0(10.0)0.51.2
33.00~8.003~102.0~15.0(10.0)0.51.5
44.00~8.003(4)~142.0~15.0(10.0)11.8
55.00~10.005~152.0~15.0(10.0)12.2
66.00~10.005~152.0~30.0(15.0)13.0
88.50~15.005(6)~162.0~30.0(15.0)1.53.5
1010.00~17.005(10)~203.0~30.0(25.0)24.0
1212.00~18.006(10)~243.0~30.0(25.0)25.0
1313.00~20.007(12)~265.0~30.0(25.0)25.5
1616.00~27.008(15)~325.0~30.037.0
2020.00~30.0010(15)~405.0~30.039.0
[ ! ]P dimension and B dimension in ( ) are applicable to Diamond Shape. [ NG ]Hard Chrome Plating and buffed products are not available for Precision Grade* (Precision Grade A and B).

Alterations

Locating Pins - Shouldered - Tapered, Shoulder Thickness Configurable - Press Fit:Related Image

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...

CAD Download

30
60
90
  1. << Prev
  2. 19
  3. 20
  4. 21
  5. 22
  6. 23
  7. Next >>
Part Number
HKFQDMM3-P[3-6/0.01]-L[3-6/1]-B[2-10/0.1]
HKFQDMM4-P[4-7/0.01]-L[4-8/1]-B[2-10/0.1]
HKFQDMM5-P[5-8/0.01]-L[5-10/1]-B[2-10/0.1]
HKFQDMM6-P[6-10/0.01]-L[6-12/1]-B[2-12/0.1]
HKFQDMM8-P[8-13/0.01]-L[8-16/1]-B[2-15/0.1]
HKFQDMM10-P[10-15/0.01]-L[10-20/1]-B[3-20/0.1]
HKFQDMM12-P[12-16/0.01]-L[12-24/1]-B[3-20/0.1]
HKFQDMM13-P[13-18/0.01]-L[13-26/1]-B[5-20/0.1]
HKFQDMM16-P[16-25/0.01]-L[16-32/1]-B[5-20/0.1]
HKFQDMM20-P[20-30/0.01]-L[20-40/1]-B[5-20/0.1]
HKFQDMP2-P[2-4/0.01]-L[2-6/1]-B[2-10/0.1]
HKFQDMP3-P[3-6/0.01]-L[3-6/1]-B[2-10/0.1]
HKFQDMP4-P[4-7/0.01]-L[4-8/1]-B[2-10/0.1]
HKFQDMP5-P[5-8/0.01]-L[5-10/1]-B[2-10/0.1]
HKFQDMP6-P[6-10/0.01]-L[6-12/1]-B[2-12/0.1]
HKFQDMP8-P[8-13/0.01]-L[8-16/1]-B[2-15/0.1]
HKFQDMP10-P[10-15/0.01]-L[10-20/1]-B[3-20/0.1]
HKFQDMP12-P[12-16/0.01]-L[12-24/1]-B[3-20/0.1]
HKFQDMP13-P[13-18/0.01]-L[13-26/1]-B[5-20/0.1]
HKFQDMP16-P[16-25/0.01]-L[16-32/1]-B[5-20/0.1]
HKFQDMP20-P[20-30/0.01]-L[20-40/1]-B[5-20/0.1]
HKFQDMS2-P[2-4/0.01]-L[2-6/1]-B[2-10/0.1]
HKFQDMS3-P[3-6/0.01]-L[3-6/1]-B[2-10/0.1]
HKFQDMS4-P[4-7/0.01]-L[4-8/1]-B[2-10/0.1]
HKFQDMS5-P[5-8/0.01]-L[5-10/1]-B[2-10/0.1]
HKFQDMS6-P[6-10/0.01]-L[6-12/1]-B[2-12/0.1]
HKFQDMS8-P[8-13/0.01]-L[8-16/1]-B[2-15/0.1]
HKFQDMS10-P[10-15/0.01]-L[10-20/1]-B[3-20/0.1]
HKFQDMS12-P[12-16/0.01]-L[12-24/1]-B[3-20/0.1]
HKFQDMS13-P[13-18/0.01]-L[13-26/1]-B[5-20/0.1]
HKFQDMS16-P[16-25/0.01]-L[16-32/1]-B[5-20/0.1]
HKFQDMS20-P[20-30/0.01]-L[20-40/1]-B[5-20/0.1]
HKFQDPG2-P[2-4/0.01]-L[2-6/1]-B[2-10/0.1]
HKFQDPG3-P[3-6/0.01]-L[3-6/1]-B[2-10/0.1]
HKFQDPG4-P[4-7/0.01]-L[4-8/1]-B[2-10/0.1]
HKFQDPG5-P[5-8/0.01]-L[5-10/1]-B[2-10/0.1]
HKFQDPG6-P[6-10/0.01]-L[6-12/1]-B[2-12/0.1]
HKFQDPG8-P[8-13/0.01]-L[8-16/1]-B[2-15/0.1]
HKFQDPG10-P[10-15/0.01]-L[10-20/1]-B[3-20/0.1]
HKFQDPG12-P[12-16/0.01]-L[12-24/1]-B[3-20/0.1]
HKFQDPG13-P[13-18/0.01]-L[13-26/1]-B[5-20/0.1]
HKFQDPG16-P[16-25/0.01]-L[16-32/1]-B[5-20/0.1]
HKFQDPG20-P[20-30/0.01]-L[20-40/1]-B[5-20/0.1]
HKFQDPH2-P[2-4/0.01]-L[2-6/1]-B[2-10/0.1]
HKFQDPH3-P[3-6/0.01]-L[3-6/1]-B[2-10/0.1]
HKFQDPH4-P[4-7/0.01]-L[4-8/1]-B[2-10/0.1]
HKFQDPH5-P[5-8/0.01]-L[5-10/1]-B[2-10/0.1]
HKFQDPH6-P[6-10/0.01]-L[6-12/1]-B[2-12/0.1]
HKFQDPH8-P[8-13/0.01]-L[8-16/1]-B[2-15/0.1]
HKFQDPH10-P[10-15/0.01]-L[10-20/1]-B[3-20/0.1]
HKFQDPH12-P[12-16/0.01]-L[12-24/1]-B[3-20/0.1]
HKFQDPH13-P[13-18/0.01]-L[13-26/1]-B[5-20/0.1]
HKFQDPH16-P[16-25/0.01]-L[16-32/1]-B[5-20/0.1]
HKFQDPH20-P[20-30/0.01]-L[20-40/1]-B[5-20/0.1]
HKFQDPM2-P[2-4/0.01]-L[2-6/1]-B[2-10/0.1]
HKFQDPM3-P[3-6/0.01]-L[3-6/1]-B[2-10/0.1]
HKFQDPM4-P[4-7/0.01]-L[4-8/1]-B[2-10/0.1]
HKFQDPM5-P[5-8/0.01]-L[5-10/1]-B[2-10/0.1]
HKFQDPM6-P[6-10/0.01]-L[6-12/1]-B[2-12/0.1]
HKFQDPM8-P[8-13/0.01]-L[8-16/1]-B[2-15/0.1]
HKFQDPM10-P[10-15/0.01]-L[10-20/1]-B[3-20/0.1]
HKFQDPM12-P[12-16/0.01]-L[12-24/1]-B[3-20/0.1]
HKFQDPM13-P[13-18/0.01]-L[13-26/1]-B[5-20/0.1]
HKFQDPM16-P[16-25/0.01]-L[16-32/1]-B[5-20/0.1]
HKFQDPM20-P[20-30/0.01]-L[20-40/1]-B[5-20/0.1]
HKFQDPP2-P[2-4/0.01]-L[2-6/1]-B[2-10/0.1]
HKFQDPP3-P[3-6/0.01]-L[3-6/1]-B[2-10/0.1]
HKFQDPP4-P[4-7/0.01]-L[4-8/1]-B[2-10/0.1]
HKFQDPP5-P[5-8/0.01]-L[5-10/1]-B[2-10/0.1]
HKFQDPP6-P[6-10/0.01]-L[6-12/1]-B[2-12/0.1]
HKFQDPP8-P[8-13/0.01]-L[8-16/1]-B[2-15/0.1]
HKFQDPP10-P[10-15/0.01]-L[10-20/1]-B[3-20/0.1]
HKFQDPP12-P[12-16/0.01]-L[12-24/1]-B[3-20/0.1]
HKFQDPP13-P[13-18/0.01]-L[13-26/1]-B[5-20/0.1]
HKFQDPP16-P[16-25/0.01]-L[16-32/1]-B[5-20/0.1]
HKFQDPP20-P[20-30/0.01]-L[20-40/1]-B[5-20/0.1]
HKFQDPS2-P[2-4/0.01]-L[2-6/1]-B[2-10/0.1]
HKFQDPS3-P[3-6/0.01]-L[3-6/1]-B[2-10/0.1]
HKFQDPS4-P[4-7/0.01]-L[4-8/1]-B[2-10/0.1]
HKFQDPS5-P[5-8/0.01]-L[5-10/1]-B[2-10/0.1]
HKFQDPS6-P[6-10/0.01]-L[6-12/1]-B[2-12/0.1]
HKFQDPS8-P[8-13/0.01]-L[8-16/1]-B[2-15/0.1]
HKFQDPS10-P[10-15/0.01]-L[10-20/1]-B[3-20/0.1]
HKFQDPS12-P[12-16/0.01]-L[12-24/1]-B[3-20/0.1]
HKFQDPS13-P[13-18/0.01]-L[13-26/1]-B[5-20/0.1]
HKFQDPS16-P[16-25/0.01]-L[16-32/1]-B[5-20/0.1]
HKFQDPS20-P[20-30/0.01]-L[20-40/1]-B[5-20/0.1]
KFQAAA1-P[1-2.5/0.01]-L[2-3/1]-B[2-5/0.1]
KFQAAA2-P[2-4/0.01]-L[2-6/1]-B[2-10/0.1]
KFQAAA3-P[3-6/0.01]-L[3-6/1]-B[2-10/0.1]
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipRoHSInsertion Guide Tip Shape Surface Treatment Heat Treatment Material Locating Side O.D. Tolerance Mounting Side Outer Dia. D
(mm) 		Mounting Side Tolerance B L Locating Side Outer Dia. P (Ø)
(mm)

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS304m63m62 ～ 103 ～ 63 ～ 6

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS304m64m62 ～ 104 ～ 84 ～ 7

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS304m65m62 ～ 105 ～ 105 ～ 8

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS304m66m62 ～ 126 ～ 126 ～ 10

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS304m68m62 ～ 158 ～ 168 ～ 13

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS304m610m63 ～ 2010 ～ 2010 ～ 15

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS304m612m63 ～ 2012 ～ 2412 ～ 16

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS304m613m65 ～ 2013 ～ 2613 ～ 18

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS304m616m65 ～ 2016 ～ 3216 ～ 25

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS304m620m65 ～ 2020 ～ 4020 ～ 30

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS304p62m62 ～ 102 ～ 62 ～ 4

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS304p63m62 ～ 103 ～ 63 ～ 6

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS304p64m62 ～ 104 ～ 84 ～ 7

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS304p65m62 ～ 105 ～ 105 ～ 8

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS304p66m62 ～ 126 ～ 126 ～ 10

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS304p68m62 ～ 158 ～ 168 ～ 13

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS304p610m63 ～ 2010 ～ 2010 ～ 15

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS304p612m63 ～ 2012 ～ 2412 ～ 16

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS304p613m65 ～ 2013 ～ 2613 ～ 18

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS304p616m65 ～ 2016 ～ 3216 ～ 25

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS304p620m65 ～ 2020 ～ 4020 ～ 30

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS3040/-0.012m62 ～ 102 ～ 62 ～ 4

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS3040/-0.013m62 ～ 103 ～ 63 ～ 6

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS3040/-0.014m62 ～ 104 ～ 84 ～ 7

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS3040/-0.015m62 ～ 105 ～ 105 ～ 8

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS3040/-0.016m62 ～ 126 ～ 126 ～ 10

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS3040/-0.018m62 ～ 158 ～ 168 ～ 13

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS3040/-0.0110m63 ～ 2010 ～ 2010 ～ 15

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS3040/-0.0112m63 ～ 2012 ～ 2412 ～ 16

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS3040/-0.0113m65 ～ 2013 ～ 2613 ～ 18

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS3040/-0.0116m65 ～ 2016 ～ 3216 ～ 25

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS3040/-0.0120m65 ～ 2020 ～ 4020 ～ 30

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS304g62p62 ～ 102 ～ 62 ～ 4

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS304g63p62 ～ 103 ～ 63 ～ 6

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS304g64p62 ～ 104 ～ 84 ～ 7

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS304g65p62 ～ 105 ～ 105 ～ 8

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS304g66p62 ～ 126 ～ 126 ～ 10

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS304g68p62 ～ 158 ～ 168 ～ 13

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS304g610p63 ～ 2010 ～ 2010 ～ 15

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS304g612p63 ～ 2012 ～ 2412 ～ 16

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS304g613p65 ～ 2013 ～ 2613 ～ 18

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS304g616p65 ～ 2016 ～ 3216 ～ 25

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS304g620p65 ～ 2020 ～ 4020 ～ 30

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS304h72p62 ～ 102 ～ 62 ～ 4

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS304h73p62 ～ 103 ～ 63 ～ 6

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS304h74p62 ～ 104 ～ 84 ～ 7

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS304h75p62 ～ 105 ～ 105 ～ 8

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS304h76p62 ～ 126 ～ 126 ～ 10

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS304h78p62 ～ 158 ～ 168 ～ 13

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS304h710p63 ～ 2010 ～ 2010 ～ 15

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS304h712p63 ～ 2012 ～ 2412 ～ 16

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS304h713p65 ～ 2013 ～ 2613 ～ 18

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS304h716p65 ～ 2016 ～ 3216 ～ 25

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS304h720p65 ～ 2020 ～ 4020 ～ 30

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS304m62p62 ～ 102 ～ 62 ～ 4

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS304m63p62 ～ 103 ～ 63 ～ 6

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS304m64p62 ～ 104 ～ 84 ～ 7

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS304m65p62 ～ 105 ～ 105 ～ 8

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS304m66p62 ～ 126 ～ 126 ～ 10

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS304m68p62 ～ 158 ～ 168 ～ 13

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS304m610p63 ～ 2010 ～ 2010 ～ 15

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS304m612p63 ～ 2012 ～ 2412 ～ 16

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS304m613p65 ～ 2013 ～ 2613 ～ 18

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS304m616p65 ～ 2016 ～ 3216 ～ 25

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS304m620p65 ～ 2020 ～ 4020 ～ 30

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS304p62p62 ～ 102 ～ 62 ～ 4

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS304p63p62 ～ 103 ～ 63 ～ 6

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS304p64p62 ～ 104 ～ 84 ～ 7

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS304p65p62 ～ 105 ～ 105 ～ 8

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS304p66p62 ～ 126 ～ 126 ～ 10

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS304p68p62 ～ 158 ～ 168 ～ 13

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS304p610p63 ～ 2010 ～ 2010 ～ 15

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS304p612p63 ～ 2012 ～ 2412 ～ 16

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS304p613p65 ～ 2013 ～ 2613 ～ 18

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS304p616p65 ～ 2016 ～ 3216 ～ 25

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS304p620p65 ～ 2020 ～ 4020 ～ 30

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS3040/-0.012p62 ～ 102 ～ 62 ～ 4

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS3040/-0.013p62 ～ 103 ～ 63 ～ 6

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS3040/-0.014p62 ～ 104 ～ 84 ～ 7

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS3040/-0.015p62 ～ 105 ～ 105 ～ 8

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS3040/-0.016p62 ～ 126 ～ 126 ～ 10

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS3040/-0.018p62 ～ 158 ～ 168 ～ 13

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS3040/-0.0110p63 ～ 2010 ～ 2010 ～ 15

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS3040/-0.0112p63 ～ 2012 ～ 2412 ～ 16

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS3040/-0.0113p65 ～ 2013 ～ 2613 ～ 18

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS3040/-0.0116p65 ～ 2016 ～ 3216 ～ 25

-

1 Piece(s) 4 Day(s) 10Diamond[Hard Chrome Plating] Hard Chrome PlatingNot Provided[Stainless Steel] SUS3040/-0.0120p65 ～ 2020 ～ 4020 ～ 30

-

1 Piece(s) 5 Day(s) or more 10RoundNot ProvidedDip Quenching[Steel] SKS3 Equivalent0.005/010.005/02 ～ 52 ～ 31 ～ 2.5

-

1 Piece(s) 3 Day(s) 10RoundNot ProvidedDip Quenching[Steel] SKS3 Equivalent0.005/020.005/02 ～ 102 ～ 62 ～ 4

-

1 Piece(s) 3 Day(s) 10RoundNot ProvidedDip Quenching[Steel] SKS3 Equivalent0.005/030.005/02 ～ 103 ～ 63 ～ 6

Loading...

  1. << Prev
  2. 19
  3. 20
  4. 21
  5. 22
  6. 23
  7. Next >>
 

Basic Information

Basic Shape Large Head Insertion Guide Tip Type Spherical Insertion Guide Specifications Not Provided
Mounting Side Shape Straight (Press-Fit)

Configure

Clear All

4,779 Part Numbers

View Part Numbers

Configure Remaining Specifications
Completed
loading

Specification/Dimensions

  • Insertion Guide Tip Shape

    • Round
    • Diamond

    Clear

  • Surface Treatment

    • Not Provided
    • Hard Chrome Plating
      • Hard Chrome Plating
    • Buffed
    • Hard Chrome Plating + Buffed

    Clear

  • Heat Treatment

    • Not Provided
    • Dip Quenching

    Clear

  • Material

    • Steel
      • SKS3 Equivalent
    • Stainless Steel
      • SUS304
      • SUS440C or Equivalent

    Clear

  • Locating Side O.D. Tolerance

    • p6
    • m6
    • h7
    • g6
    • 0/-0.01
    • 0.005/0
    • 0/-0.005

    Clear

  • Mounting Side Outer Dia. D(mm)

    • 1
    • 2
    • 3
    • 4
    • 5
    • 6
    • 8
    • 10
    • 12
    • 13
    • 16
    • 20

    Clear

  • Mounting Side Tolerance

    • p6
    • m6
    • h7
    • g6
    • 0.005/0
    • 0/-0.005

    Clear

  • B

     [2-30/0.1]

    Clear

  • L

     [2-40/1]

    Clear

  • Locating Side Outer Dia. P (Ø)(mm)

     [1-30/0.01mm Unit(s)]

    Clear

  • type

    • CKFQAAA
    • CKFQAAB
    • CKFQAAG
    • CKFQAAH
    • CKFQAAM
    • CKFQAAP
    • CKFQAAS
    • CKFQABA
    • CKFQABB
    • CKFQABG
    • CKFQABH
    • CKFQABM
    • CKFQABP
    • CKFQABS
    • CKFQAGA
    • CKFQAGB
    • CKFQAGG
    • CKFQAGH
    • CKFQAGM
    • CKFQAGP
    • CKFQAGS
    • CKFQAHA
    • CKFQAHB
    • CKFQAHG
    • CKFQAHH
    • CKFQAHM
    • CKFQAHP
    • CKFQAHS
    • CKFQAMA
    • CKFQAMB
    • CKFQAMG
    • CKFQAMH
    • CKFQAMM
    • CKFQAMP
    • CKFQAMS
    • CKFQAPA
    • CKFQAPB
    • CKFQAPG
    • CKFQAPH
    • CKFQAPM
    • CKFQAPP
    • CKFQAPS
    • CKFQDAA
    • CKFQDAB
    • CKFQDAG
    • CKFQDAH
    • CKFQDAM
    • CKFQDAP
    • CKFQDAS
    • CKFQDBA
    • CKFQDBB
    • CKFQDBG
    • CKFQDBH
    • CKFQDBM
    • CKFQDBP
    • CKFQDBS
    • CKFQDGA
    • CKFQDGB
    • CKFQDGG
    • CKFQDGH
    • CKFQDGM
    • CKFQDGP
    • CKFQDGS
    • CKFQDHA
    • CKFQDHB
    • CKFQDHG
    • CKFQDHH
    • CKFQDHM
    • CKFQDHP
    • CKFQDHS
    • CKFQDMA
    • CKFQDMB
    • CKFQDMG
    • CKFQDMH
    • CKFQDMM
    • CKFQDMP
    • CKFQDMS
    • CKFQDPA
    • CKFQDPB
    • CKFQDPG
    • CKFQDPH
    • CKFQDPM
    • CKFQDPP
    • CKFQDPS
    • GKFQAGG
    • GKFQAGH
    • GKFQAGM
    • GKFQAGP
    • GKFQAGS
    • GKFQAHG
    • GKFQAHH
    • GKFQAHM
    • GKFQAHP
    • GKFQAHS
    • GKFQAMG
    • GKFQAMH
    • GKFQAMM
    • GKFQAMP
    • GKFQAMS
    • GKFQAPG
    • GKFQAPH
    • GKFQAPM
    • GKFQAPP
    • GKFQAPS
    • GKFQDGG
    • GKFQDGH
    • GKFQDGM
    • GKFQDGP
    • GKFQDGS
    • GKFQDHG
    • GKFQDHH
    • GKFQDHM
    • GKFQDHP
    • GKFQDHS
    • GKFQDMG
    • GKFQDMH
    • GKFQDMM
    • GKFQDMP
    • GKFQDMS
    • GKFQDPG
    • GKFQDPH
    • GKFQDPM
    • GKFQDPP
    • GKFQDPS
    • HKFQAGG
    • HKFQAGH
    • HKFQAGM
    • HKFQAGP
    • HKFQAGS
    • HKFQAHG
    • HKFQAHH
    • HKFQAHM
    • HKFQAHP
    • HKFQAHS
    • HKFQAMG
    • HKFQAMH
    • HKFQAMM
    • HKFQAMP
    • HKFQAMS
    • HKFQAPG
    • HKFQAPH
    • HKFQAPM
    • HKFQAPP
    • HKFQAPS
    • HKFQDGG
    • HKFQDGH
    • HKFQDGM
    • HKFQDGP
    • HKFQDGS
    • HKFQDHG
    • HKFQDHH
    • HKFQDHM
    • HKFQDHP
    • HKFQDHS
    • HKFQDMG
    • HKFQDMH
    • HKFQDMM
    • HKFQDMP
    • HKFQDMS
    • HKFQDPG
    • HKFQDPH
    • HKFQDPM
    • HKFQDPP
    • HKFQDPS
    • KFQAAA
    • KFQAAB
    • KFQAAG
    • KFQAAH
    • KFQAAM
    • KFQAAP
    • KFQAAS
    • KFQABA
    • KFQABB
    • KFQABG
    • KFQABH
    • KFQABM
    • KFQABP
    • KFQABS
    • KFQAGA
    • KFQAGB
    • KFQAGG
    • KFQAGH
    • KFQAGM
    • KFQAGP
    • KFQAGS
    • KFQAHA
    • KFQAHB
    • KFQAHG
    • KFQAHH
    • KFQAHM
    • KFQAHP
    • KFQAHS
    • KFQAMA
    • KFQAMB
    • KFQAMG
    • KFQAMH
    • KFQAMM
    • KFQAMP
    • KFQAMS
    • KFQAPA
    • KFQAPB
    • KFQAPG
    • KFQAPH
    • KFQAPM
    • KFQAPP
    • KFQAPS
    • KFQDAA
    • KFQDAB
    • KFQDAG
    • KFQDAH
    • KFQDAM
    • KFQDAP
    • KFQDAS
    • KFQDBA
    • KFQDBB
    • KFQDBG
    • KFQDBH
    • KFQDBM
    • KFQDBP
    • KFQDBS
    • KFQDGA
    • KFQDGB
    • KFQDGG
    • KFQDGH
    • KFQDGM
    • KFQDGP
    • KFQDGS
    • KFQDHA
    • KFQDHB
    • KFQDHG
    • KFQDHH
    • KFQDHM
    • KFQDHP
    • KFQDHS
    • KFQDMA
    • KFQDMB
    • KFQDMG
    • KFQDMH
    • KFQDMM
    • KFQDMP
    • KFQDMS
    • KFQDPA
    • KFQDPB
    • KFQDPG
    • KFQDPH
    • KFQDPM
    • KFQDPP
    • KFQDPS
    • MCKFQAGG
    • MCKFQAGH
    • MCKFQAGM
    • MCKFQAGP
    • MCKFQAGS
    • MCKFQAHG
    • MCKFQAHH
    • MCKFQAHM
    • MCKFQAHP
    • MCKFQAHS
    • MCKFQAMG
    • MCKFQAMH
    • MCKFQAMM
    • MCKFQAMP
    • MCKFQAMS
    • MCKFQAPG
    • MCKFQAPH
    • MCKFQAPM
    • MCKFQAPP
    • MCKFQAPS
    • MCKFQDGG
    • MCKFQDGH
    • MCKFQDGM
    • MCKFQDGP
    • MCKFQDGS
    • MCKFQDHG
    • MCKFQDHH
    • MCKFQDHM
    • MCKFQDHP
    • MCKFQDHS
    • MCKFQDMG
    • MCKFQDMH
    • MCKFQDMM
    • MCKFQDMP
    • MCKFQDMS
    • MCKFQDPG
    • MCKFQDPH
    • MCKFQDPM
    • MCKFQDPP
    • MCKFQDPS
    • MGKFQAGG
    • MGKFQAGH
    • MGKFQAGM
    • MGKFQAGP
    • MGKFQAGS
    • MGKFQAHG
    • MGKFQAHH
    • MGKFQAHM
    • MGKFQAHP
    • MGKFQAHS
    • MGKFQAMG
    • MGKFQAMH
    • MGKFQAMM
    • MGKFQAMP
    • MGKFQAMS
    • MGKFQAPG
    • MGKFQAPH
    • MGKFQAPM
    • MGKFQAPP
    • MGKFQAPS
    • MGKFQDGG
    • MGKFQDGH
    • MGKFQDGM
    • MGKFQDGP
    • MGKFQDGS
    • MGKFQDHG
    • MGKFQDHH
    • MGKFQDHM
    • MGKFQDHP
    • MGKFQDHS
    • MGKFQDMG
    • MGKFQDMH
    • MGKFQDMM
    • MGKFQDMP
    • MGKFQDMS
    • MGKFQDPG
    • MGKFQDPH
    • MGKFQDPM
    • MGKFQDPP
    • MGKFQDPS
    • MKFQAGG
    • MKFQAGH
    • MKFQAGM
    • MKFQAGP
    • MKFQAGS
    • MKFQAHG
    • MKFQAHH
    • MKFQAHM
    • MKFQAHP
    • MKFQAHS
    • MKFQAMG
    • MKFQAMH
    • MKFQAMM
    • MKFQAMP
    • MKFQAMS
    • MKFQAPG
    • MKFQAPH
    • MKFQAPM
    • MKFQAPP
    • MKFQAPS
    • MKFQDGG
    • MKFQDGH
    • MKFQDGM
    • MKFQDGP
    • MKFQDGS
    • MKFQDHG
    • MKFQDHH
    • MKFQDHM
    • MKFQDHP
    • MKFQDHS
    • MKFQDMG
    • MKFQDMH
    • MKFQDMM
    • MKFQDMP
    • MKFQDMS
    • MKFQDPG
    • MKFQDPH
    • MKFQDPM
    • MKFQDPP
    • MKFQDPS
    • SKFQAAA
    • SKFQAAB
    • SKFQAAG
    • SKFQAAH
    • SKFQAAM
    • SKFQAAP
    • SKFQAAS
    • SKFQABA
    • SKFQABB
    • SKFQABG
    • SKFQABH
    • SKFQABM
    • SKFQABP
    • SKFQABS
    • SKFQAGA
    • SKFQAGB
    • SKFQAGG
    • SKFQAGH
    • SKFQAGM
    • SKFQAGP
    • SKFQAGS
    • SKFQAHA
    • SKFQAHB
    • SKFQAHG
    • SKFQAHH
    • SKFQAHM
    • SKFQAHP
    • SKFQAHS
    • SKFQAMA
    • SKFQAMB
    • SKFQAMG
    • SKFQAMH
    • SKFQAMM
    • SKFQAMP
    • SKFQAMS
    • SKFQAPA
    • SKFQAPB
    • SKFQAPG
    • SKFQAPH
    • SKFQAPM
    • SKFQAPP
    • SKFQAPS
    • SKFQDAA
    • SKFQDAB
    • SKFQDAG
    • SKFQDAH
    • SKFQDAM
    • SKFQDAP
    • SKFQDAS
    • SKFQDBA
    • SKFQDBB
    • SKFQDBG
    • SKFQDBH
    • SKFQDBM
    • SKFQDBP
    • SKFQDBS
    • SKFQDGA
    • SKFQDGB
    • SKFQDGG
    • SKFQDGH
    • SKFQDGM
    • SKFQDGP
    • SKFQDGS
    • SKFQDHA
    • SKFQDHB
    • SKFQDHG
    • SKFQDHH
    • SKFQDHM
    • SKFQDHP
    • SKFQDHS
    • SKFQDMA
    • SKFQDMB
    • SKFQDMG
    • SKFQDMH
    • SKFQDMM
    • SKFQDMP
    • SKFQDMS
    • SKFQDPA
    • SKFQDPB
    • SKFQDPG
    • SKFQDPH
    • SKFQDPM
    • SKFQDPP
    • SKFQDPS

    Clear

  • CAD

    • 2D
    • 3D

    Clear

Days to Ship

    • All
    • 3 Day(s) or Less
    • 4 Day(s) or Less
    • 5 Day(s) or Less
    • 6 Day(s) or Less

    Clear

Specify Alterations

Additional Products in this Category

Complementary Products

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel：(60) 3 7890 6399
9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday)
Technical Inquiry

Payment Method

more
  • Credit Card
    • VISA
    • MasterCard
  • Bank Transfer
    • FPX
    • Interbank GIRO (IBG)

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm,    9am – 1pm(Sat) * Order cut-off time is 12pm

  • Tel: (60) 3 7890 6399
Inquiry
Mobile View

Copyright © MISUMI Corporation All Rights Reserved.