(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Webcode Seach | Series
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

Loading

  • [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

  • How can we improve?

    How can we improve?

    Comments
    Name (Optional)
    E-mail Address (Optional)
    Tel (Optional)

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Customer Privacy Policy

    Thank you for your cooperation.

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Please use the inquiry form.

    Customer Privacy Policy

Locating Pins - High Hardness Stainless Steel Large Head, Tapered (Tapped)

Locating Pins - High Hardness Stainless Steel Large Head, Tapered (Tapped)

Click this image to zoom it.

Move the mouse over the image to zoom

MISUMI

MISUMI

Large Head Tapered with each dimension configurable. We reduced the price drastically compared to the conventional products.

PDFP.1-1621-2015

Part Number

Configured Part Number is shown.

● Tapped

(Round)

(Diamond)

Locating Pin - High Hardness Stainless Steel, Large Head, Tapered, Tapped: Related Image
[ ! ] When B + E > 20 mm, the P dim. tolerance is 0-0.02.
[ ! ] P-2EtanA ≥ 0.73 (Tip Diameter ø0.73 or more)
Reference: tan15° ≒ 0.267, tan30° ≒ 0.577
tan45° = 1, tan60° ≒ 1.732
[ ! ] SUS316L has an identification groove at any position on D part.
[ M ] Material[ H ] HardnessPin
Config.		TappedFeatures
D Tol.
g6h7
High Hardness Stainless Steel*35HRC or moreRoundAFPBTAAFPBTHAAn austenitic stainless steel that offers both hardness (35 HRC and above) and corrosion resistance, providing a cost-effective and well-balanced option.
DiamondAFPBTDAFPBTHD
High Strength Stainless Steel55HRC or moreRoundZFPBTAZFPBTHAA martensitic stainless steel with hardness equivalent to SUS440C (55 HRC and above) and superior corrosion resistance compared to SUS440C.
DiamondZFPBTDZFPBTHD
SUS316L－RoundXFPBTAXFPBTHAThis is an upgraded material compared to SUS304. This is a low-carbon, more corrosion-resistant, non-magnetic austenitic stainless steel.
DiamondXFPBTDXFPBTHD
*When the dia. exceeds ø10, the center hardness may become 30HRC or more.
■Salt Water Spray Test Results (Austenite)
 High Hardness
Stainless Steel
(35HRC or more)		SUS316LSUS304
Before
Test
24hr
48hr
168hr
Testing Method
*Conforms to JIS Z2371:2015 Salt Spray Test Method
Appearance of test piece before the test, 24 hrs, 48 hrs, and 168 hrs
■Salt Water Spray Test Results (Martensite)
 High Strength
Stainless Steel
(55HRC or more)		SUS440C EquivalentSKS3
Equivalent
(Reference)
Before
Test
24hr
48hr
168hrーーー
■Shear Testing Results
MaterialShear LoadHardness
High Strength Stainless Steel33kN55HRC or more
High Hardness Stainless Steel26kN35HRC or more
SUS30420kN10 to 20HRC
SKS3 Equivalent33kN60 to 63HRC
SUS440C31kN50 to 55HRC
*Locating pins (same size as JPBB6-8) are set on the fixture and
a load applied with a universal tester to measure the shearing load.
・Image Figure
■ Tolerance
D or Pm6p6g6h7
1.00
Up to 3.00		+0.008
+0.002		+0.012
+0.006		－0.002
－0.008		0
－0.010
3.01
Up to 6.00		+0.012
+0.004		+0.020
+0.012		－0.004
－0.012		0
－0.012
6.01
Up to 10.00		+0.015
+0.006		+0.024
+0.015		－0.005
－0.014		0
－0.015
10.01
Up to 18.00		+0.018
+0.007		+0.029
+0.018		－0.006
－0.017		0
－0.018
18.01
Up to 25.50		+0.021
+0.008		+0.035
+0.022		－0.007
－0.020		0
－0.021

Specification Table

Part Number P—L—B
   —
Type D 
AFPBTA 8—P9.01—L12—B6.4
Part NumberP
0.01 mm Increments		L
1 mm Increments		B
0.1 mm Increments		EM1
(Coarse)		*Tightening Torque
N・cm		ℓ2(W)
TypeDNot Configurable0.1 mm Increments
High Hardness Stainless Steel (35HRC or more)
[Round]
AFPBTA(g6)
AFPBTHA(h7)




[Diamond]
AFPBTD(g6)
AFPBTHD(h7)		High Strength Stainless Steel (55HRC or more)
[Round]
ZFPBTA(g6)
ZFPBTHA(h7)
[ ! ] Applicable when D ≤ 13
[ ! ] Applicable when P ≤ 19.6
[Diamond]
ZFPBTD(g6)
ZFPBTHD(h7)
[ ! ] Applicable when D ≤ 13
[ ! ] Applicable when P ≤ 19.6		SUS316L


[Round]
XFPBTA(g6)
XFPBTHA(h7)
[ ! ] Applicable when D ≤ 13


[Diamond]
XFPBTD(g6)
XFPBTHD(h7)
[ ! ] Applicable when D ≤ 13		66.50 to 12.006(9) to 161.0 to 30.0(20.0)3.00.5 to 10.0M31475.03.0
88.50 to 15.008(12) to 163.0M43336.03.5
1010.50 to 16.0010(12) to 204.0M56768.04.0
1212.50 to 17.5012 to 254.05.0
1313.50 to 20.0012 to 251.0 to 30.0(20.0)4.0M611569.05.5
1617.00 to 25.5017 to 245.0 to 30.0(27.0)5.07.0
2022.00 to 25.5017(18) to 305.0 to 30.05.09.0
[ ! ] L, B dimensions in ( ) are applicable to diamond shape.
[ ! ] Hole may go through.
[ ! ] High-strength stainless steel, SUS316L is applicable to D dimension of 13 mm or less.
[ ! ] High-strength stainless steel is applicable to P dimension of 19.6 mm or less.
＊ Not applicable when using locking agents or spring washers.

Alterations

Alterations
Code		Alteration DetailsApplication ConditionsOrdering Example
ACAir Vent (Air-vent groove)
Alterations
Locating Pin - High Hardness Stainless Steel, Large Head, Tapered, Tapped: Related Image
[ ! ] It has a relief grooveAFPBTA8-P9.05-L12-B10.4-AC
LACAdds a wrench hole
Locating Pin - High Hardness Stainless Steel, Large Head, Tapered, Tapped: Related Image

[ ! ] Diamond Shape Hole is drilled on the diamond head vertically
but with arbitrary orientation of their diamond surfaces against those of the diamond head.

[ ! ] Applicable when D ≥ 6
Applicable DimensionsWrench Hole Dimensions
PBQ
Up to 9.995.0 to 9.92
10.0 to 30.02.5
10.00 or more5.0 to 7.92
8.0 to 11.92.5
12.0 to 30.03.5
AFPBTA8-P9.05-L12-B10.4-LAC
RACAdds a hex socket
Locating Pin - High Hardness Stainless Steel, Large Head, Tapered, Tapped: Related Image

[ ! ] S + 3 ≤ P-2 × E × tanA°
Values in ( ) are applicable to Tapped Type

DApplicable DimensionsHex Hole Dimensions
BSe
6 to 76.5 (11.0) or more32
8 to 97.0 (12.0) or more42.5
10 to 118.0 (13.0) or more53
12 to 159.0 (13.0) or more64
16 to 1915.0 or more64
2015.0 or more64
AFPBTA8-P9.05-L12-B12.4-RAC
PM/PP
PG/PH		Changes P Dimension Tolerance
Locating Pin - High Hardness Stainless Steel, Large Head, Tapered, Tapped: Related Image
[ NG ] B + E > 20 not applicable
Ordering CodeTolerance
PMm6
PPp6
PGg6
PHh7
AFPBTA8-P9.05-L12-B10.4-PM
AChanges the taper angle
Locating Pin - High Hardness Stainless Steel, Large Head, Tapered, Tapped: Related Image
Ordering CodeAngle
A3030°
A4545°
A6060°
AFPBTA8-P9.05-L12-B10.4-A60
[ NG ] Combination with LAC or RAC is not available

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...

CAD Download

30
45
60
  1. 1
Part Number
AFPBTA6-P[6.5-12/0.01]-L[6-16/1]-B[1-30/0.1]
AFPBTA8-P[8.5-15/0.01]-L[8-16/1]-B[1-30/0.1]
AFPBTA10-P[10.5-16/0.01]-L[10-20/1]-B[1-30/0.1]
AFPBTA12-P[12.5-17.5/0.01]-L[12-25/1]-B[1-30/0.1]
AFPBTD6-P[6.5-12/0.01]-L[9-16/1]-B[1-20/0.1]
AFPBTD8-P[8.5-15/0.01]-L[12-16/1]-B[1-20/0.1]
AFPBTD10-P[10.5-16/0.01]-L[12-20/1]-B[1-20/0.1]
AFPBTD12-P[12.5-17.5/0.01]-L[12-25/1]-B[1-20/0.1]
AFPBTHA6-P[6.5-12/0.01]-L[6-16/1]-B[1-30/0.1]
AFPBTHA8-P[8.5-15/0.01]-L[8-16/1]-B[1-30/0.1]
AFPBTHA10-P[10.5-16/0.01]-L[10-20/1]-B[1-30/0.1]
AFPBTHA12-P[12.5-17.5/0.01]-L[12-25/1]-B[1-30/0.1]
AFPBTHD6-P[6.5-12/0.01]-L[9-16/1]-B[1-20/0.1]
AFPBTHD8-P[8.5-15/0.01]-L[12-16/1]-B[1-20/0.1]
AFPBTHD10-P[10.5-16/0.01]-L[12-20/1]-B[1-20/0.1]
AFPBTHD12-P[12.5-17.5/0.01]-L[12-25/1]-B[1-20/0.1]
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipRoHSInsertion Guide Tip Shape Locating Side Outer Dia. P (Ø)
(mm) 		Mounting Side Outer Dia. D
(mm) 		Mounting Side Tolerance Screw Dia. M
(mm) 		B
(mm) 		L
(mm)

-

1 Piece(s) 6 Day(s) or more 10Round6.5 ～ 126g631 ～ 306 ～ 16

-

1 Piece(s) 6 Day(s) or more 10Round8.5 ～ 158g641 ～ 308 ～ 16

-

1 Piece(s) 6 Day(s) or more 10Round10.5 ～ 1610g651 ～ 3010 ～ 20

-

1 Piece(s) 6 Day(s) or more 10Round12.5 ～ 17.512g651 ～ 3012 ～ 25

-

1 Piece(s) 6 Day(s) or more 10Diamond6.5 ～ 126g631 ～ 209 ～ 16

-

1 Piece(s) 6 Day(s) or more 10Diamond8.5 ～ 158g641 ～ 2012 ～ 16

-

1 Piece(s) 6 Day(s) or more 10Diamond10.5 ～ 1610g651 ～ 2012 ～ 20

-

1 Piece(s) 6 Day(s) or more 10Diamond12.5 ～ 17.512g651 ～ 2012 ～ 25

-

1 Piece(s) 6 Day(s) or more 10Round6.5 ～ 126h731 ～ 306 ～ 16

-

1 Piece(s) 6 Day(s) or more 10Round8.5 ～ 158h741 ～ 308 ～ 16

-

1 Piece(s) 6 Day(s) or more 10Round10.5 ～ 1610h751 ～ 3010 ～ 20

-

1 Piece(s) 6 Day(s) or more 10Round12.5 ～ 17.512h751 ～ 3012 ～ 25

-

1 Piece(s) 6 Day(s) or more 10Diamond6.5 ～ 126h731 ～ 209 ～ 16

-

1 Piece(s) 6 Day(s) or more 10Diamond8.5 ～ 158h741 ～ 2012 ～ 16

-

1 Piece(s) 6 Day(s) or more 10Diamond10.5 ～ 1610h751 ～ 2012 ～ 20

-

1 Piece(s) 6 Day(s) or more 10Diamond12.5 ～ 17.512h751 ～ 2012 ～ 25

Loading...

  1. 1
 

Basic Information

Basic Shape Large Head Insertion Guide Tip Type Tapered Material Details High Strength Stainless Steel (35 HRC or more)
Insertion Guide Specifications Not Provided Mounting Side Shape Tapped Surface Treatment Not Provided
Heat Treatment Not Provided Material High Hardness Stainless Steel Locating Side O.D. Tolerance 0/-0.01
Cleaning Method No Cleaning Dimension Configurable Type P, L, B Configurable

Configure

Clear All

16 Part Numbers

View Part Numbers

Configure Remaining Specifications
Completed
loading

Specification/Dimensions

  • Insertion Guide Tip Shape

    • Round
    • Diamond

    Clear

  • Locating Side Outer Dia. P (Ø)(mm)

     [6.5-17.5/0.01mm Unit(s)]

    Clear

  • Mounting Side Outer Dia. D(mm)

    • 6
    • 8
    • 10
    • 12

    Clear

  • Mounting Side Tolerance

    • h7
    • g6

    Clear

  • Screw Dia. M(mm)

    • 3
    • 4
    • 5

    Clear

  • B(mm)

     [1-30/0.1mm Unit(s)]

    Clear

  • L(mm)

     [6-25/1mm Unit(s)]

    Clear

  • type

    • AFPBTA
    • AFPBTD
    • AFPBTHA
    • AFPBTHD

    Clear

  • CAD

    • 2D
    • 3D

    Clear

Days to Ship

    • All
    • 6 Day(s) or Less

    Clear

Specify Alterations

Additional Products in this Category

Complementary Products

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel：(60) 3 7890 6399
9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday)
Technical Inquiry

Payment Method

more
  • Credit Card
    • VISA
    • MasterCard
  • Bank Transfer
    • FPX
    • Interbank GIRO (IBG)

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm,    9am – 1pm(Sat) * Order cut-off time is 12pm

  • Tel: (60) 3 7890 6399
Inquiry
Mobile View

Copyright © MISUMI Corporation All Rights Reserved.