(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Flanged Idlers with Teeth - S2M, S3M - Center Bearing (Part Numbers)
- Volume Discount
It can be used for timing belt tension adjustment and driven pulley.
[Material]
· Pulley: Aluminum alloy, SUS304
· Flange: Aluminum alloy, SUS304
· Bearing: Steel, stainless steel
[Surface treatment]
· Clear anodize, electroless nickel plating
(i)Caution
- Please note that the swaged flange options, NFC, RFC, and LFC, are not reflected in the CAD data.
Part Number
Configured Part Number is shown.
[Bearing 1 pc.]
[Bearing 2 pcs.]
* Bearing accuracy: JIS B1514 Class 0
[ ! ] Unless otherwise specified except for teeth and F dimensions, the dimension tolerance conforms to JIS B 0405 Class m.
| Type | [M] Material | [S] Surface Treatment | ||
| Main Body | Flange | Bearing | ||
| AHTF | 2000 Series Aluminum alloy | Aluminum alloy | Steel | Clear Anodize |
| KHTF | Hard Clear Anodize | |||
| NHTF | Electroless nickel plating | |||
| SHTF | SUS304 | Stainless Steel | — | |
Specification Table
| Part number | — | d | ||||
| Type | Number of Teeth | Applicable Belt | ||||
| AHTF | 40 | S2M060 | — | 5 | ||
The selection method has been changed according to the above, and the shaft diameter (d) has been added to the part number.
| Part number | Shaft Dia. | P.D. | O.D. | F | E | A | W | S | Bearing Dimensions | ||||
| Type | Number of Teeth | Applicable Belt | d | No. | D | B | |||||||
| AHTF KHTF NHTF SHTF | 40 | S2M040 | 5 | 25.46 | 24.96 | 30 | 20 | 5 | 9 | 2.5 | 695ZZ × 1 | 13 | 4 |
| S2M060 | 6 | 7 | 11 | 3 | 696ZZ × 1 | 15 | 5 | ||||||
| S2M100 | 11 | 15 | 5 | ||||||||||
| 48 | S2M040 | 6 | 30.56 | 30.05 | 35 | 25 | 5 | 9 | 2 | 696ZZ × 1 | 15 | 5 | |
| S2M060 | 7 | 11 | 3 | ||||||||||
| 50 | S2M040 | 6 | 31.83 | 31.32 | 35 | 25 | 5 | 9 | 2 | 696ZZ × 1 | 15 | 5 | |
| S2M060 | 7 | 11 | 3 | ||||||||||
| S2M060 | 8 | 7 | 11 | 2.5 | 698ZZ × 1 | 19 | 6 | ||||||
| 60 | S2M100 | 8 | 38.20 | 37.69 | 44 | 32 | 11 | 15 | 3.5 | 628ZZ × 1 | 24 | 8 | |
| S2M040 | 10 | 5 | 9 | 1.5 | 6900ZZ × 1 | 22 | 6 | ||||||
| S2M060 | 7 | 11 | 2.5 | ||||||||||
| S2M100 | 11 | 15 | 3.5 | 6000ZZ × 1 | 26 | 8 | |||||||
| Part number | Shaft Dia. | P.D. | O.D. | F | E | A | W | S | Bearing Dimensions | ||||
| Type | Number of Teeth | Applicable Belt | d | No. | D | B | |||||||
| AHTF KHTF NHTF SHTF | 20 | S3M060 | 5 | 19.10 | 18.34 | 22 | 14 | 7 | 11 | 3 | 685ZZ × 1 | 11 | 5 |
| S3M100 | 11 | 15 | 2.5 | 685ZZ × 2 | |||||||||
| 24 | S3M060 | 5 | 22.92 | 22.16 | 25 | 16 | 7 | 11 | 3.5 | 695ZZ × 1 | 13 | 4 | |
| S3M100 | 11 | 15 | 3.5 | 695ZZ × 2 | |||||||||
| 25 | S3M060 | 5 | 23.87 | 23.11 | 28 | 18 | 7 | 11 | 3.5 | 695ZZ × 1 | 13 | 4 | |
| 26 | S3M060 | 6 | 24.83 | 24.07 | 7 | 11 | 3 | 696ZZ × 1 | 15 | 5 | |||
| 28 | S3M060 | 6 | 26.74 | 25.98 | 30 | 20 | 7 | 11 | 3 | 696ZZ × 1 | 15 | 5 | |
| 30 | S3M060 | 6 | 28.65 | 27.89 | 32 | 23 | 7 | 11 | 3 | 696ZZ × 1 | 15 | 5 | |
| S3M100 | 11 | 15 | 4.5 | 626ZZ × 1 | 19 | 6 | |||||||
| 32 | S3M060 | 8 | 30.56 | 29.80 | 35 | 25 | 7 | 11 | 2.5 | 698ZZ × 1 | 19 | 6 | |
| S3M100 | 11 | 15 | 4.5 | ||||||||||
| S3M150 | 10 | 17 | 21 | 4.5 | 6900ZZ × 2 | 22 | 6 | ||||||
| 34 | S3M060 | 8 | 32.47 | 31.71 | 40 | 28 | 7 | 11 | 2.5 | 698ZZ × 1 | 19 | 6 | |
| S3M100 | 11 | 15 | 4 | 608ZZ × 1 | 22 | 7 | |||||||
| 36 | S3M060 | 8 | 34.38 | 33.62 | 40 | 28 | 7 | 11 | 2.5 | 698ZZ × 1 | 19 | 6 | |
| S3M100 | 11 | 15 | 4 | 608ZZ × 1 | 22 | 7 | |||||||
| 40 | S3M060 | 8 | 38.20 | 37.44 | 44 | 32 | 7 | 11 | 2.5 | 698ZZ × 1 | 19 | 6 | |
| S3M100 | 11 | 15 | 3.5 | 628ZZ × 1 | 24 | 8 | |||||||
| S3M060 | 10 | 7 | 11 | 2.5 | 6900ZZ × 1 | 22 | 6 | ||||||
| S3M100 | 11 | 15 | 3.5 | 6000ZZ × 1 | 26 | 8 | |||||||
| S3M150 | 17 | 21 | 4.5 | 6900ZZ × 2 | 22 | 6 | |||||||
| S3M060 | 12 | 7 | 11 | 2.5 | 6901ZZ × 1 | 24 | 6 | ||||||
| S3M150 | 17 | 21 | 4.5 | 6901ZZ × 2 | 24 | 6 | |||||||
| 44 | S3M060 | 8 | 42.02 | 41.25 | 48 | 36 | 7 | 11 | 2.5 | 698ZZ × 1 | 19 | 6 | |
| S3M100 | 11 | 15 | 3.5 | 628ZZ × 1 | 24 | 8 | |||||||
| S3M060 | 10 | 7 | 11 | 2.5 | 6900ZZ × 1 | 22 | 6 | ||||||
| S3M100 | 11 | 15 | 3.5 | 6000ZZ × 1 | 26 | 8 | |||||||
| S3M150 | 17 | 21 | 4.5 | 6900ZZ × 2 | 22 | 6 | |||||||
| S3M060 | 12 | 7 | 11 | 2.5 | 6901ZZ × 1 | 24 | 6 | ||||||
| S3M100 | 11 | 15 | 3.5 | 6001ZZ × 1 | 28 | 8 | |||||||
| S3M150 | 17 | 21 | 4.5 | 6901ZZ × 2 | 24 | 6 | |||||||
| 48 | S3M060 | 10 | 45.84 | 45.07 | 50 | 38 | 7 | 11 | 2.5 | 6900ZZ × 1 | 22 | 6 | |
| S3M100 | 11 | 15 | 3.5 | 6000ZZ × 1 | 26 | 8 | |||||||
| S3M150 | 17 | 21 | 4.5 | 6900ZZ × 2 | 22 | 6 | |||||||
| 50 | S3M060 | 10 | 47.75 | 46.98 | 52 | 40 | 7 | 11 | 2.5 | 6900ZZ × 1 | 22 | 6 | |
| S3M100 | 11 | 15 | 3.5 | 6000ZZ × 1 | 26 | 8 | |||||||
| S3M150 | 17 | 21 | 4.5 | 6900ZZ × 2 | 22 | 6 | |||||||
| S3M060 | 12 | 7 | 11 | 2.5 | 6901ZZ × 1 | 24 | 6 | ||||||
| S3M100 | 11 | 15 | 3.5 | 6001ZZ × 1 | 28 | 8 | |||||||
| S3M150 | 17 | 21 | 4.5 | 6901ZZ × 2 | 24 | 6 | |||||||
| 60 | S3M060 | 10 | 57.30 | 56.53 | 61 | 46 | 7 | 11 | 2.5 | 6900ZZ × 1 | 22 | 6 | |
| S3M100 | 11 | 15 | 3.5 | 6000ZZ × 1 | 26 | 8 | |||||||
Alterations
| Part number | — | d | — | (FC·NFC·LFC·RFC) |
| AHTF40S2M060 | — | 5 | — | FC28 |
| Alterations | Flange Cut | No Flange | Single Flange |
| Code | FC | NFC | LFC·RFC |
| Spec. | Lowers the flange by cutting. FC: 0.5 mm Increments  [ ! ] No surface treatment is applied on flange circumference. [ ! ]FC ≥ (O. D.) +1 [ ! ]FC ≤ F－2 Ordering Code FC28 | The product is shipped without swaging the flange. (Flange Included)  | The product is shipped with the flange swaged either on the bushing side (RFC) or the opposite side (LFC). (Flange 1 pc. Included)  |
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
| Part Number |
|---|
| Part Number | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Belt Type | Belt Width Used (mm) | No. of Teeth (T) | Material | Surface Treatment | Features, Areas of Application | Shaft Bore Dia. d (mm) | Bearing Position | Shaft Bore Dia. d (mm) | Bearing Position |
|---|
Loading...
Basic Information
| Type | Idlers with Teeth | Timing Pulley / Idler | Idlers | Environmental Compliance | RoHS compliant (10 substances) |
|---|
Specification/Dimensions
-
Belt Width Used(mm)
-
No. of Teeth(T)
-
Material
- Aluminum
- SUS304
- Aluminum
-
Surface Treatment
- Not Provided
- Clear Anodize
- Electroless Nickel Plating
-
Features, Areas of Application
-
Shaft Bore Dia. d(mm)
-
Bearing Position
- Center Bearing
-
Shaft Bore Dia. d(mm)
-
Bearing Position
- Center Bearing Type
-
type
- AHTF□□S2M
- AHTF□□S3M
- NHTF□□S3M
- SHTF
- SHTF□□S3M
-
Belt Type
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 2 Day(s) or Less
- 6 Day(s) or Less
- 7 Day(s) or Less
- 8 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Keyless High Torque Timing Pulleys - S5M - MechaLock Standard Type Incorporated (with Centering Function)
- Idlers MXL
- MXL/XL/L/S2M/S3M/S5M/T5/T10 (made of stainless steel with thickness 1.0)
- K Timing Belt Pulley XL Type
- Timing Pulley H Type
- Timing Pulley MXL Type
- Star Quick T10-25
- GATES UNITTA ASIA Backlash-Less Pulley (BLP) 2GT-Type
Complementary Products
-
Rotary Shafts D Tolerance h9 (Cold-drawn) / h7 (Ground) / g6 (Ground) - One End Stepped and Threaded, One End Tapped
MISUMI Days to Ship : 5 Day(s) or more
-
Cantilever Shafts - Threaded with Retaining Ring Groove - Standard
MISUMI Days to Ship : 5 Day(s) or more
Customers Who Viewed This Item Also Viewed
-
-
Flanged Idlers with Teeth - S2M, S3M - Both Sides BearingMISUMI
Standard Price : MYR 81.23-
Days to Ship : 1 Day(s) or more
-
Flanged Idlers with Teeth - P2M, P3M, P5M, P8M - Center BearingMISUMI
Standard Price : MYR 116.09-
Days to Ship : 6 Day(s) or more
-
Flanged Idlers with Teeth - MXL, XL - Center BearingMISUMI
Standard Price : MYR 81.23-
Days to Ship : 6 Day(s) or more
-
-
Flanged Idlers with Teeth - MXL, XL - Both Sides BearingMISUMI
Standard Price : MYR 73.95-
Days to Ship : 2 Day(s) or more
-
Idler - Belt Backside Tensioning - Center BearingMISUMI
Standard Price : MYR 44.86-
Days to Ship : 1 Day(s) or more
-
Flanged Idlers with Teeth - S5M, S8M, S14M - Both Sides BearingMISUMI
Standard Price : MYR 144.26-
Days to Ship : 2 Day(s) or more
-
Flanged Idlers with Teeth - S5M, S8M - Center BearingMISUMI
Standard Price : MYR 87.28-
Days to Ship : 1 Day(s) or more
-
Flanged Idlers with Teeth - T5, T10 - Both Sides BearingMISUMI
Standard Price : MYR 117.60-
Days to Ship : 2 Day(s) or more
-
Flanged Idlers with Teeth - 2GT, 3GT, 5GT, 8YU - Center BearingMISUMI
Standard Price : MYR 89.71-
Days to Ship : 6 Day(s) or more
-
Flanged Idlers with Teeth - L, H - Both Sides BearingMISUMI
Standard Price : MYR 179.01-
Days to Ship : 7 Day(s) or more
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy