[Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Linear Shafts-One End Stepped and Threaded / Both Ends Stepped and Threaded

[Features]A shaft with a stepped male thread on one end (linear shaft, hardened shaft, guide shaft, slide shaft). L size standard expanded! You can now purchase from an even more complete lineup.

Part Number

Configured Part Number is shown.

Drawing/Specifications
3D Preview
Part Numbers
More Information
Catalog
Technical Information

One End Stepped and Threaded:Related Image

Type						[ M ]Material	[ H ]Hardness	[ S ] Surface Treatment
One End Stepped and Threaded			Both Ends Stepped and Threaded
D Tol. g6	D Tol. h5	D Tol. f8	D Tol. g6	D Tol. h5	D Tol. f8
SFAF	SFUF	-	SFAX	SFUX	-	SUJ2 Equivalent	Effective Hardened Depth of Induction Hardening >> P.142 SUJ2 Equivalent: 58HRC~ SUS440C or 13Cr stainless: 56HRC~	-
SSFAF	SSFUF	-	SSFAX	SSFUX	-	SUS440C or 13Cr stainless		-
PSFAF	PSFUF	-	PSFAX	PSFUX	-	SUJ2 Equivalent		Hard Chrome Plating - Plating Hardness: HV750 ~, Plating Thickness: 5µ or More ~
PSSFAF	PSSFUF	-	PSSFAX	PSSFUX	-	SUS440C or 13Cr stainless
RSFAF	-	-	RSFAX	-	-	SUJ2 Equivalent		Low Temp. Black Chrome Plating
-	-	PSFGF	-	-	PSFGX	S45C Equivalent	-	Hard Chrome Plating - Plating Hardness: HV750 ~, Plating Thickness: 10µ or More ~
-	-	PSSFGF	-	-	PSSFGX	SUS304	-

[ ! ] Annealing may lower hardness at shaft end machined areas (effective thread length + approx. 10mm). >> P.142
[ ! ] L Dimension Tolerance, Circularity, Straightness, Perpendicularity, Concentricity and Changes in Hardness >> P.141
[ ! ] Features of Low Temp. Black Chrome Plating p1_156

Specifications

Part Number	-	L	-	F	-	B	-	P	-	M	-	T	-	S	-	Q	-	N
SFAX20	-	400	-	F30	-	B20	-	P10	-	M8	-	T20	-	S15	-	Q10	-	N8

Part Number			1mm Increment				M (Coarse) Selection								D Tol.			(Y)Max.	R	C
Type		D	L	F	B	P	M (Coarse) Selection								g6	h5	f8	(Y)Max.	R	C
One End Stepped and Threaded (D Tol. g6) SFAF SSFAF PSFAF PSSFAF (D Tol. f8) PSFGF PSSFGF	(D Tol. h5) SFUF SSFUF PSFUF PSSFUF	8	25~ 990	10≤F≤Px5	Pitchx3+(g)≤B≤Mx3	M<P<D	6								-0.005 -0.014	0 -0.006	-0.013 -0.035	800	0.3 or Less	0.5 or Less
		10	25~ 990				6	8							-0.005 -0.014	0 -0.006	-0.013 -0.035	800	0.3 or Less	0.5 or Less
		12	25~1190				6	8	10						-0.006 -0.017	0 -0.008	-0.016 -0.043	1000	0.3 or Less	0.5 or Less
		13	25~1190				6	8	10						-0.006 -0.017	0 -0.008	-0.016 -0.043	1000	0.3 or Less	0.5 or Less
		15	25~1190				6	8	10	12					-0.006 -0.017	0 -0.008	-0.016 -0.043	1000	0.3 or Less	0.5 or Less
		16	25~1190				6	8	10	12					-0.006 -0.017	0 -0.008	-0.016 -0.043	1200	0.3 or Less	0.5 or Less
		18	25~1190				6	8	10	12	16				-0.006 -0.017	0 -0.008	-0.016 -0.043	1200	0.3 or Less	0.5 or Less
		20	25~1190				6	8	10	12	16				-0.007 -0.020	0 -0.009	-0.020 -0.053	1200	0.3 or Less	1.0 or Less
		25	25~1190					8	10	12	16	20			-0.007 -0.020	0 -0.009	-0.020 -0.053	1200	0.3 or Less	1.0 or Less
		30	25~1490					8	10	12	16	20	24		-0.007 -0.020	0 -0.009	-0.020 -0.053	1500	0.3 or Less	1.0 or Less
		35	25~1480	20≤F≤Px5					10	12	16	20	24	30	-0.009 -0.025	0 -0.011	-0.025 -0.064	1500	0.5 or Less	1.0 or Less
		40	25~1480							12	16	20	24	30	-0.009 -0.025	0 -0.011	-0.025 -0.064	1500	0.5 or Less	1.0 or Less
		50	25~1480								16	20	24	30	-0.009 -0.025	0 -0.011	-0.025 -0.064	1500	0.5 or Less	1.0 or Less

Part Number			1mm Increment				M (Coarse), N (Coarse) Selection								D Tol.			(Y)Max.	R	C
Type		D	L	F, T	B, S	P, Q	M (Coarse), N (Coarse) Selection								g6	h5	f8	(Y)Max.	R	C
Both Ends Stepped and Threaded (D Tol. g6) SFAX SSFAX PSFAX PSSFAX (D Tol. f8) PSFGX PSSFGX	(D Tol. h5) SFUX SSFUX PSFUX PSSFUX	8	25~790	10≤F≤Px510≤T≤Qx5	Pitchx3+(g)≤B≤Mx3 Pitchx3+(g)≤S≤Nx3	M<P<DN<Q<D	6								-0.005 -0.014	0 -0.006	-0.013 -0.035	800	0.3 or Less	0.5 or Less
		10	25~790				6	8							-0.005 -0.014	0 -0.006	-0.013 -0.035	800	0.3 or Less	0.5 or Less
		12	25~990				6	8	10						-0.006 -0.017	0 -0.008	-0.016 -0.043	1000	0.3 or Less	0.5 or Less
		13	25~990				6	8	10						-0.006 -0.017	0 -0.008	-0.016 -0.043	1000	0.3 or Less	0.5 or Less
		15	25~990				6	8	10	12					-0.006 -0.017	0 -0.008	-0.016 -0.043	1000	0.3 or Less	0.5 or Less
		16	25~1190				6	8	10	12					-0.006 -0.017	0 -0.008	-0.016 -0.043	1200	0.3 or Less	0.5 or Less
		18	25~1190				6	8	10	12	16				-0.006 -0.017	0 -0.008	-0.016 -0.043	1200	0.3 or Less	0.5 or Less
		20	25~1190				6	8	10	12	16				-0.007 -0.020	0 -0.009	-0.020 -0.053	1200	0.3 or Less	1.0 or Less
		25	25~1190					8	10	12	16	20			-0.007 -0.020	0 -0.009	-0.020 -0.053	1200	0.3 or Less	1.0 or Less
		30	25~1490					8	10	12	16	20	24		-0.007 -0.020	0 -0.009	-0.020 -0.053	1500	0.3 or Less	1.0 or Less
		35	25~1480	20≤F≤Px520≤T≤Qx5					10	12	16	20	24	30	-0.009 -0.025	0 -0.011	-0.025 -0.064	1500	0.5 or Less	1.0 or Less
		40	25~1480							12	16	20	24	30	-0.009 -0.025	0 -0.011	-0.025 -0.064	1500	0.5 or Less	1.0 or Less
		50	25~1480								16	20	24	30	-0.009 -0.025	0 -0.011	-0.025 -0.064	1500	0.5 or Less	1.0 or Less

Coarse Thread Undercut Dimensions
M N	Pitch	MC NC	(g)
6	1.0	4.4	2
8	1.25	6.0	3
10	1.5	7.7	3
12	1.75	9.4	4
16	2.0	13.0	4
20	2.5	16.4	5
24	3.0	19.6	5
30	3.5	25.0	5

Part Number		1mm Increment				M (Coarse) Selection							D Tol.	(Y)Max.	R	C
Type	D	L	F	B	P	M (Coarse) Selection							g6	(Y)Max.	R	C
One End Stepped and Threaded (D Tol. g6) Low Temp. Black Chrome Plating RSFAF (Ymax≤800)	8	25~500	10≤F≤Px5	Pitchx3+(g)≤B≤Mx3	M<P<D	6							-0.005 -0.014	800	0.3 or Less	0.5 or Less
	10	25~500				6	8						-0.005 -0.014	800	0.3 or Less	0.5 or Less
	12	25~500				6	8	10					-0.006 -0.017	1000	0.3 or Less	0.5 or Less
	13	25~500				6	8	10					-0.006 -0.017	1000	0.3 or Less	0.5 or Less
	15	25~500				6	8	10	12				-0.006 -0.017	1000	0.3 or Less	0.5 or Less
	16	25~500				6	8	10	12				-0.006 -0.017	1200	0.3 or Less	0.5 or Less
	18	25~500				6	8	10	12	16			-0.006 -0.017	1200	0.3 or Less	0.5 or Less
	20	25~500				6	8	10	12	16			-0.007 -0.020	1200	0.3 or Less	1.0 or Less
	25	25~500					8	10	12	16	20		-0.007 -0.020	1200	0.3 or Less	1.0 or Less
	30	25~500					8	10	12	16	20	24	-0.007 -0.020	1500	0.3 or Less	1.0 or Less

Part Number		1mm Increment				M (Coarse), N (Coarse) Selection							D Tol.	(Y)Max.	R	C
Type	D	L	F, T	B, S	P, Q	M (Coarse), N (Coarse) Selection							g6	(Y)Max.	R	C
Both Ends Stepped and Threaded (D Tol. g6) Low Temp. Black Chrome Plating RSFAX (Ymax≤800)	8	25~500	10≤F≤Px510≤T≤Qx5	Pitchx3+(g)≤B≤Mx3 Pitchx3+(g)≤S≤Nx3	M<P<DN<Q<D	6							-0.005 -0.014	800	0.3 or Less	0.5 or Less
	10	25~500				6	8						-0.005 -0.014	800	0.3 or Less	0.5 or Less
	12	25~500				6	8	10					-0.006 -0.017	1000	0.3 or Less	0.5 or Less
	13	25~500				6	8	10					-0.006 -0.017	1000	0.3 or Less	0.5 or Less
	15	25~500				6	8	10	12				-0.006 -0.017	1000	0.3 or Less	0.5 or Less
	16	25~500				6	8	10	12				-0.006 -0.017	1200	0.3 or Less	0.5 or Less
	18	25~500				6	8	10	12	16			-0.006 -0.017	1200	0.3 or Less	0.5 or Less
	20	25~500				6	8	10	12	16			-0.007 -0.020	1200	0.3 or Less	1.0 or Less
	25	25~500					8	10	12	16	20		-0.007 -0.020	1200	0.3 or Less	1.0 or Less
	30	25~500					8	10	12	16	20	24	-0.007 -0.020	1500	0.3 or Less	1.0 or Less

[ ! ] F-B(T-S)≥2 is required.

Alterations

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 45; 60

1
2
3
4
5
Next >>

Part Number
PSFAF8-[25-790/1]-F[10-42/1]-B[6-30/1]-P7-M6
PSFAF8-[25-790/1]-F[10-42/1]-B[6-30/1]-P7-MMC6
PSFAF10-[25-790/1]-F[10-63/1]-B[6-40/1]-P[7,8,9]-M[6,8]
PSFAF10-[25-790/1]-F[10-63/1]-B[6-40/1]-P[7,8,9]-MMC[6,8]
PSFAF12-[25-990/1]-F[10-77/1]-B[6-50/1]-P[7,8,9,10,11]-M[6,8,10]
PSFAF12-[25-990/1]-F[10-77/1]-B[6-50/1]-P[7,8,9,10,11]-MMC[6,8,10]
PSFAF12-[25-990/1]-F[10-77/1]-B[6-50/1]-P[7,8,9,10,11]-MMS10
PSFAF13-[25-990/1]-F[10-84/1]-B[6-50/1]-P[7-12/1]-M[6,8,10]
PSFAF13-[25-990/1]-F[10-84/1]-B[6-50/1]-P[7-12/1]-MMC[6,8,10]
PSFAF13-[25-990/1]-F[10-84/1]-B[6-50/1]-P[7-12/1]-MMS10
PSFAF15-[25-990/1]-F[10-98/1]-B[6-60/1]-P[7-14/1]-M[6,8,10,12]
PSFAF15-[25-990/1]-F[10-98/1]-B[6-60/1]-P[7-14/1]-MMC[6,8,10,12]
PSFAF15-[25-990/1]-F[10-98/1]-B[6-60/1]-P[7-14/1]-MMS[10,12]
PSFAF16-[25-1190/1]-F[10-105/1]-B[6-60/1]-P[7-15/1]-M[6,8,10,12]
PSFAF16-[25-1190/1]-F[10-105/1]-B[6-60/1]-P[7-15/1]-MMC[6,8,10,12]
PSFAF16-[25-1190/1]-F[10-105/1]-B[6-60/1]-P[7-15/1]-MMS[10,12]
PSFAF18-[25-1190/1]-F[10-119/1]-B[6-80/1]-P[7-17/1]-M[6,8,10,12,16]
PSFAF18-[25-1190/1]-F[10-119/1]-B[6-80/1]-P[7-17/1]-MMC[6,8,10,12]
PSFAF18-[25-1190/1]-F[10-119/1]-B[6-80/1]-P[7-17/1]-MMS[10,12,14]
PSFAF20-[25-1190/1]-F[10-133/1]-B[6-80/1]-P[7-19/1]-M[6,8,10,12,16]
PSFAF20-[25-1190/1]-F[10-133/1]-B[6-80/1]-P[7-19/1]-MMC[6,8,10,12,16]
PSFAF20-[25-1190/1]-F[10-133/1]-B[6-80/1]-P[7-19/1]-MMS[10,12,14,18]
PSFAF25-[25-1190/1]-F[10-168/1]-B[8-100/1]-P[9-24/1]-M[8,10,12,16,20]
PSFAF25-[25-1190/1]-F[10-168/1]-B[8-100/1]-P[9-24/1]-MMC[8,10,12,15,17,20]
PSFAF25-[25-1190/1]-F[10-168/1]-B[8-100/1]-P[9-24/1]-MMS[10,12,14,18]
PSFAF30-[25-1490/1]-F[10-203/1]-B[8-120/1]-P[9-29/1]-M[8,10,12,16,20,24]
PSFAF30-[25-1490/1]-F[10-203/1]-B[8-120/1]-P[9-29/1]-MMC[8,10,12,15,17,20,25]
PSFAF30-[25-1490/1]-F[10-203/1]-B[8-120/1]-P[9-29/1]-MMS[10,12,14,18]
PSFAF35-[25-1480/1]-F[20-238/1]-B[10-210/1]-P[11-34/1]-M[10,12,16,20,24,30]
PSFAF35-[25-1480/1]-F[20-238/1]-B[10-210/1]-P[11-34/1]-MMC[10,12,15,17,20,25,30]
PSFAF35-[25-1480/1]-F[20-238/1]-B[10-210/1]-P[11-34/1]-MMS[10,12,14,18]
PSFAF40-[25-1480/1]-F[20-273/1]-B[12-210/1]-P[13-39/1]-M[12,16,20,24,30]
PSFAF40-[25-1480/1]-F[20-273/1]-B[12-210/1]-P[13-39/1]-MMC[12,15,17,20,25,30]
PSFAF40-[25-1480/1]-F[20-273/1]-B[12-210/1]-P[13-39/1]-MMS[12,14,18]
PSFAF50-[25-1480/1]-F[20-343/1]-B[16-210/1]-P[17-49/1]-M[16,20,24,30]
PSFAF50-[25-1480/1]-F[20-343/1]-B[16-210/1]-P[17-49/1]-MMC[15,17,20,25,30]
PSFAF50-[25-1480/1]-F[20-343/1]-B[16-210/1]-P[17-49/1]-MMS[14,18]
PSFAX8-[25-780/1]-F[2-42/1]-B[6-30/1]-P7-M6-T[2-42/1]-S[6-30/1]-Q7-N6
PSFAX8-[25-780/1]-F[2-42/1]-B[6-30/1]-P7-M6-T[2-42/1]-S[6-30/1]-Q7-NMC6
PSFAX8-[25-780/1]-F[2-42/1]-B[6-30/1]-P7-MMC6-T[2-42/1]-S[6-30/1]-Q7-N6
PSFAX8-[25-780/1]-F[2-42/1]-B[6-30/1]-P7-MMC6-T[2-42/1]-S[6-30/1]-Q7-NMC6
PSFAX10-[25-780/1]-F[2-63/1]-B[6-40/1]-P[7,8,9]-M[6,8]-T[2-63/1]-S[6-40/1]-Q[7,8,9]-N[6,8]
PSFAX10-[25-780/1]-F[2-63/1]-B[6-40/1]-P[7,8,9]-M[6,8]-T[2-63/1]-S[6-40/1]-Q[7,8,9]-NMC[6,8]
PSFAX10-[25-780/1]-F[2-63/1]-B[6-40/1]-P[7,8,9]-MMC[6,8]-T[2-63/1]-S[6-40/1]-Q[7,8,9]-N[6,8]
PSFAX10-[25-780/1]-F[2-63/1]-B[6-40/1]-P[7,8,9]-MMC[6,8]-T[2-63/1]-S[6-40/1]-Q[7,8,9]-NMC[6,8]
PSFAX12-[25-980/1]-F[2-77/1]-B[6-50/1]-P[7,8,9,10,11]-M[6,8,10]-T[2-77/1]-S[6-50/1]-Q[7,8,9,10,11]-N[6,8,10]
PSFAX12-[25-980/1]-F[2-77/1]-B[6-50/1]-P[7,8,9,10,11]-M[6,8,10]-T[2-77/1]-S[6-50/1]-Q[7,8,9,10,11]-NMC[6,8,10]
PSFAX12-[25-980/1]-F[2-77/1]-B[6-50/1]-P[7,8,9,10,11]-M[6,8,10]-T[2-77/1]-S[6-50/1]-Q[7,8,9,10,11]-NMS10
PSFAX12-[25-980/1]-F[2-77/1]-B[6-50/1]-P[7,8,9,10,11]-MMC[6,8,10]-T[2-77/1]-S[6-50/1]-Q[7,8,9,10,11]-N[6,8,10]
PSFAX12-[25-980/1]-F[2-77/1]-B[6-50/1]-P[7,8,9,10,11]-MMC[6,8,10]-T[2-77/1]-S[6-50/1]-Q[7,8,9,10,11]-NMC[6,8,10]
PSFAX12-[25-980/1]-F[2-77/1]-B[6-50/1]-P[7,8,9,10,11]-MMC[6,8,10]-T[2-77/1]-S[6-50/1]-Q[7,8,9,10,11]-NMS10
PSFAX12-[25-980/1]-F[2-77/1]-B[6-50/1]-P[7,8,9,10,11]-MMS10-T[2-77/1]-S[6-50/1]-Q[7,8,9,10,11]-N[6,8,10]
PSFAX12-[25-980/1]-F[2-77/1]-B[6-50/1]-P[7,8,9,10,11]-MMS10-T[2-77/1]-S[6-50/1]-Q[7,8,9,10,11]-NMC[6,8,10]
PSFAX12-[25-980/1]-F[2-77/1]-B[6-50/1]-P[7,8,9,10,11]-MMS10-T[2-77/1]-S[6-50/1]-Q[7,8,9,10,11]-NMS10
PSFAX13-[25-980/1]-F[2-84/1]-B[6-50/1]-P[7-12/1]-M[6,8,10]-T[2-84/1]-S[6-50/1]-Q[7-12/1]-N[6,8,10]
PSFAX13-[25-980/1]-F[2-84/1]-B[6-50/1]-P[7-12/1]-M[6,8,10]-T[2-84/1]-S[6-50/1]-Q[7-12/1]-NMC[6,8,10]
PSFAX13-[25-980/1]-F[2-84/1]-B[6-50/1]-P[7-12/1]-M[6,8,10]-T[2-84/1]-S[6-50/1]-Q[7-12/1]-NMS10
PSFAX13-[25-980/1]-F[2-84/1]-B[6-50/1]-P[7-12/1]-MMC[6,8,10]-T[2-84/1]-S[6-50/1]-Q[7-12/1]-N[6,8,10]
PSFAX13-[25-980/1]-F[2-84/1]-B[6-50/1]-P[7-12/1]-MMC[6,8,10]-T[2-84/1]-S[6-50/1]-Q[7-12/1]-NMC[6,8,10]
PSFAX13-[25-980/1]-F[2-84/1]-B[6-50/1]-P[7-12/1]-MMC[6,8,10]-T[2-84/1]-S[6-50/1]-Q[7-12/1]-NMS10

Standard Unit Price	Minimum order quantity	Days to Ship	RoHS	Basic Shape	End Shape (Right)	Material	Heat Treatment	Surface Treatment	Shaft Dia. D (Ø)	Length L (mm)	Shaft Fit Tolerance	Hardness	B (mm)	Change Thread M to Fine One [MMC] (mm)	Change Thread M to Fine One [MMS] (mm)	Change Thread N to Fine One [NMC] (mm)	Change Thread N to Fine One [NMS] (mm)	F (mm)	P (mm)	Q (mm)	S (mm)	T (mm)	Threaded (Coarse) [M] (mm)	Threaded (Coarse) [N] (mm)	Tapped (Coarse Theread) (mm)
-	1 Piece(s)	6 Day(s)	10	One End Stepped	No Machining	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	8	25 ～ 790	g6	Induction Hardened (58HRC~)	6 ～ 30	-	-	-	-	10 ～ 42	7	-	-	-	6	-	-
-	1 Piece(s)	6 Day(s)	10	One End Stepped	No Machining	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	8	25 ～ 790	g6	Induction Hardened (58HRC~)	6 ～ 30	6	-	-	-	10 ～ 42	7	-	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	One End Stepped	No Machining	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	10	25 ～ 790	g6	Induction Hardened (58HRC~)	6 ～ 40	-	-	-	-	10 ～ 63	7 ～ 9	-	-	-	6 ～ 8	-	-
-	1 Piece(s)	6 Day(s)	10	One End Stepped	No Machining	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	10	25 ～ 790	g6	Induction Hardened (58HRC~)	6 ～ 40	6 ～ 8	-	-	-	10 ～ 63	7 ～ 9	-	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	One End Stepped	No Machining	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	12	25 ～ 990	g6	Induction Hardened (58HRC~)	6 ～ 50	-	-	-	-	10 ～ 77	7 ～ 11	-	-	-	6 ～ 10	-	-
-	1 Piece(s)	6 Day(s)	10	One End Stepped	No Machining	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	12	25 ～ 990	g6	Induction Hardened (58HRC~)	6 ～ 50	6 ～ 10	-	-	-	10 ～ 77	7 ～ 11	-	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	One End Stepped	No Machining	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	12	25 ～ 990	g6	Induction Hardened (58HRC~)	6 ～ 50	-	10	-	-	10 ～ 77	7 ～ 11	-	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	One End Stepped	No Machining	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	13	25 ～ 990	g6	Induction Hardened (58HRC~)	6 ～ 50	-	-	-	-	10 ～ 84	7 ～ 12	-	-	-	6 ～ 10	-	-
-	1 Piece(s)	6 Day(s)	10	One End Stepped	No Machining	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	13	25 ～ 990	g6	Induction Hardened (58HRC~)	6 ～ 50	6 ～ 10	-	-	-	10 ～ 84	7 ～ 12	-	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	One End Stepped	No Machining	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	13	25 ～ 990	g6	Induction Hardened (58HRC~)	6 ～ 50	-	10	-	-	10 ～ 84	7 ～ 12	-	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	One End Stepped	No Machining	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	15	25 ～ 990	g6	Induction Hardened (58HRC~)	6 ～ 60	-	-	-	-	10 ～ 98	7 ～ 14	-	-	-	6 ～ 12	-	-
-	1 Piece(s)	6 Day(s)	10	One End Stepped	No Machining	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	15	25 ～ 990	g6	Induction Hardened (58HRC~)	6 ～ 60	6 ～ 12	-	-	-	10 ～ 98	7 ～ 14	-	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	One End Stepped	No Machining	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	15	25 ～ 990	g6	Induction Hardened (58HRC~)	6 ～ 60	-	10 ～ 12	-	-	10 ～ 98	7 ～ 14	-	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	One End Stepped	No Machining	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	16	25 ～ 1190	g6	Induction Hardened (58HRC~)	6 ～ 60	-	-	-	-	10 ～ 105	7 ～ 15	-	-	-	6 ～ 12	-	-
-	1 Piece(s)	6 Day(s)	10	One End Stepped	No Machining	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	16	25 ～ 1190	g6	Induction Hardened (58HRC~)	6 ～ 60	6 ～ 12	-	-	-	10 ～ 105	7 ～ 15	-	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	One End Stepped	No Machining	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	16	25 ～ 1190	g6	Induction Hardened (58HRC~)	6 ～ 60	-	10 ～ 12	-	-	10 ～ 105	7 ～ 15	-	-	-	-	-	-
-	1 Piece(s)	6 Day(s) or more	10	One End Stepped	No Machining	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	18	25 ～ 1190	g6	Induction Hardened (58HRC~)	6 ～ 80	-	-	-	-	10 ～ 119	7 ～ 17	-	-	-	6 ～ 16	-	-
-	1 Piece(s)	6 Day(s) or more	10	One End Stepped	No Machining	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	18	25 ～ 1190	g6	Induction Hardened (58HRC~)	6 ～ 80	6 ～ 12	-	-	-	10 ～ 119	7 ～ 17	-	-	-	-	-	-
-	1 Piece(s)	6 Day(s) or more	10	One End Stepped	No Machining	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	18	25 ～ 1190	g6	Induction Hardened (58HRC~)	6 ～ 80	-	10 ～ 14	-	-	10 ～ 119	7 ～ 17	-	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	One End Stepped	No Machining	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	20	25 ～ 1190	g6	Induction Hardened (58HRC~)	6 ～ 80	-	-	-	-	10 ～ 133	7 ～ 19	-	-	-	6 ～ 16	-	-
-	1 Piece(s)	6 Day(s)	10	One End Stepped	No Machining	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	20	25 ～ 1190	g6	Induction Hardened (58HRC~)	6 ～ 80	6 ～ 16	-	-	-	10 ～ 133	7 ～ 19	-	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	One End Stepped	No Machining	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	20	25 ～ 1190	g6	Induction Hardened (58HRC~)	6 ～ 80	-	10 ～ 18	-	-	10 ～ 133	7 ～ 19	-	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	One End Stepped	No Machining	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	25	25 ～ 1190	g6	Induction Hardened (58HRC~)	8 ～ 100	-	-	-	-	10 ～ 168	9 ～ 24	-	-	-	8 ～ 20	-	-
-	1 Piece(s)	6 Day(s)	10	One End Stepped	No Machining	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	25	25 ～ 1190	g6	Induction Hardened (58HRC~)	8 ～ 100	8 ～ 20	-	-	-	10 ～ 168	9 ～ 24	-	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	One End Stepped	No Machining	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	25	25 ～ 1190	g6	Induction Hardened (58HRC~)	8 ～ 100	-	10 ～ 18	-	-	10 ～ 168	9 ～ 24	-	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	One End Stepped	No Machining	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	30	25 ～ 1490	g6	Induction Hardened (58HRC~)	8 ～ 120	-	-	-	-	10 ～ 203	9 ～ 29	-	-	-	8 ～ 24	-	-
-	1 Piece(s)	6 Day(s)	10	One End Stepped	No Machining	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	30	25 ～ 1490	g6	Induction Hardened (58HRC~)	8 ～ 120	8 ～ 25	-	-	-	10 ～ 203	9 ～ 29	-	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	One End Stepped	No Machining	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	30	25 ～ 1490	g6	Induction Hardened (58HRC~)	8 ～ 120	-	10 ～ 18	-	-	10 ～ 203	9 ～ 29	-	-	-	-	-	-
-	1 Piece(s)	6 Day(s) or more	10	One End Stepped	No Machining	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	35	25 ～ 1480	g6	Induction Hardened (58HRC~)	10 ～ 210	-	-	-	-	20 ～ 238	11 ～ 34	-	-	-	10 ～ 30	-	-
-	1 Piece(s)	6 Day(s) or more	10	One End Stepped	No Machining	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	35	25 ～ 1480	g6	Induction Hardened (58HRC~)	10 ～ 210	10 ～ 30	-	-	-	20 ～ 238	11 ～ 34	-	-	-	-	-	-
-	1 Piece(s)	6 Day(s) or more	10	One End Stepped	No Machining	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	35	25 ～ 1480	g6	Induction Hardened (58HRC~)	10 ～ 210	-	10 ～ 18	-	-	20 ～ 238	11 ～ 34	-	-	-	-	-	-
-	1 Piece(s)	6 Day(s) or more	10	One End Stepped	No Machining	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	40	25 ～ 1480	g6	Induction Hardened (58HRC~)	12 ～ 210	-	-	-	-	20 ～ 273	13 ～ 39	-	-	-	12 ～ 30	-	-
-	1 Piece(s)	6 Day(s) or more	10	One End Stepped	No Machining	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	40	25 ～ 1480	g6	Induction Hardened (58HRC~)	12 ～ 210	12 ～ 30	-	-	-	20 ～ 273	13 ～ 39	-	-	-	-	-	-
-	1 Piece(s)	6 Day(s) or more	10	One End Stepped	No Machining	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	40	25 ～ 1480	g6	Induction Hardened (58HRC~)	12 ～ 210	-	12 ～ 18	-	-	20 ～ 273	13 ～ 39	-	-	-	-	-	-
-	1 Piece(s)	6 Day(s) or more	10	One End Stepped	No Machining	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	50	25 ～ 1480	g6	Induction Hardened (58HRC~)	16 ～ 210	-	-	-	-	20 ～ 343	17 ～ 49	-	-	-	16 ～ 30	-	-
-	1 Piece(s)	6 Day(s) or more	10	One End Stepped	No Machining	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	50	25 ～ 1480	g6	Induction Hardened (58HRC~)	16 ～ 210	15 ～ 30	-	-	-	20 ～ 343	17 ～ 49	-	-	-	-	-	-
-	1 Piece(s)	6 Day(s) or more	10	One End Stepped	No Machining	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	50	25 ～ 1480	g6	Induction Hardened (58HRC~)	16 ～ 210	-	14 ～ 18	-	-	20 ～ 343	17 ～ 49	-	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	8	25 ～ 780	g6	Induction Hardened (58HRC~)	6 ～ 30	-	-	-	-	2 ～ 42	7	7	6 ～ 30	2 ～ 42	6	6	-
-	1 Piece(s)	6 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	8	25 ～ 780	g6	Induction Hardened (58HRC~)	6 ～ 30	-	-	6	-	2 ～ 42	7	7	6 ～ 30	2 ～ 42	6	-	-
-	1 Piece(s)	6 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	8	25 ～ 780	g6	Induction Hardened (58HRC~)	6 ～ 30	6	-	-	-	2 ～ 42	7	7	6 ～ 30	2 ～ 42	-	6	-
-	1 Piece(s)	6 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	8	25 ～ 780	g6	Induction Hardened (58HRC~)	6 ～ 30	6	-	6	-	2 ～ 42	7	7	6 ～ 30	2 ～ 42	-	-	-
-	1 Piece(s)	6 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	10	25 ～ 780	g6	Induction Hardened (58HRC~)	6 ～ 40	-	-	-	-	2 ～ 63	7 ～ 9	7 ～ 9	6 ～ 40	2 ～ 63	6 ～ 8	6 ～ 8	-
-	1 Piece(s)	6 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	10	25 ～ 780	g6	Induction Hardened (58HRC~)	6 ～ 40	-	-	6 ～ 8	-	2 ～ 63	7 ～ 9	7 ～ 9	6 ～ 40	2 ～ 63	6 ～ 8	-	-
-	1 Piece(s)	6 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	10	25 ～ 780	g6	Induction Hardened (58HRC~)	6 ～ 40	6 ～ 8	-	-	-	2 ～ 63	7 ～ 9	7 ～ 9	6 ～ 40	2 ～ 63	-	6 ～ 8	-
-	1 Piece(s)	6 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	10	25 ～ 780	g6	Induction Hardened (58HRC~)	6 ～ 40	6 ～ 8	-	6 ～ 8	-	2 ～ 63	7 ～ 9	7 ～ 9	6 ～ 40	2 ～ 63	-	-	-
-	1 Piece(s)	6 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	12	25 ～ 980	g6	Induction Hardened (58HRC~)	6 ～ 50	-	-	-	-	2 ～ 77	7 ～ 11	7 ～ 11	6 ～ 50	2 ～ 77	6 ～ 10	6 ～ 10	-
-	1 Piece(s)	6 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	12	25 ～ 980	g6	Induction Hardened (58HRC~)	6 ～ 50	-	-	6 ～ 10	-	2 ～ 77	7 ～ 11	7 ～ 11	6 ～ 50	2 ～ 77	6 ～ 10	-	-
-	1 Piece(s)	6 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	12	25 ～ 980	g6	Induction Hardened (58HRC~)	6 ～ 50	-	-	-	10	2 ～ 77	7 ～ 11	7 ～ 11	6 ～ 50	2 ～ 77	6 ～ 10	-	-
-	1 Piece(s)	6 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	12	25 ～ 980	g6	Induction Hardened (58HRC~)	6 ～ 50	6 ～ 10	-	-	-	2 ～ 77	7 ～ 11	7 ～ 11	6 ～ 50	2 ～ 77	-	6 ～ 10	-
-	1 Piece(s)	6 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	12	25 ～ 980	g6	Induction Hardened (58HRC~)	6 ～ 50	6 ～ 10	-	6 ～ 10	-	2 ～ 77	7 ～ 11	7 ～ 11	6 ～ 50	2 ～ 77	-	-	-
-	1 Piece(s)	6 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	12	25 ～ 980	g6	Induction Hardened (58HRC~)	6 ～ 50	6 ～ 10	-	-	10	2 ～ 77	7 ～ 11	7 ～ 11	6 ～ 50	2 ～ 77	-	-	-
-	1 Piece(s)	6 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	12	25 ～ 980	g6	Induction Hardened (58HRC~)	6 ～ 50	-	10	-	-	2 ～ 77	7 ～ 11	7 ～ 11	6 ～ 50	2 ～ 77	-	6 ～ 10	-
-	1 Piece(s)	6 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	12	25 ～ 980	g6	Induction Hardened (58HRC~)	6 ～ 50	-	10	6 ～ 10	-	2 ～ 77	7 ～ 11	7 ～ 11	6 ～ 50	2 ～ 77	-	-	-
-	1 Piece(s)	6 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	12	25 ～ 980	g6	Induction Hardened (58HRC~)	6 ～ 50	-	10	-	10	2 ～ 77	7 ～ 11	7 ～ 11	6 ～ 50	2 ～ 77	-	-	-
-	1 Piece(s)	6 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	13	25 ～ 980	g6	Induction Hardened (58HRC~)	6 ～ 50	-	-	-	-	2 ～ 84	7 ～ 12	7 ～ 12	6 ～ 50	2 ～ 84	6 ～ 10	6 ～ 10	-
-	1 Piece(s)	6 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	13	25 ～ 980	g6	Induction Hardened (58HRC~)	6 ～ 50	-	-	6 ～ 10	-	2 ～ 84	7 ～ 12	7 ～ 12	6 ～ 50	2 ～ 84	6 ～ 10	-	-
-	1 Piece(s)	6 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	13	25 ～ 980	g6	Induction Hardened (58HRC~)	6 ～ 50	-	-	-	10	2 ～ 84	7 ～ 12	7 ～ 12	6 ～ 50	2 ～ 84	6 ～ 10	-	-
-	1 Piece(s)	6 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	13	25 ～ 980	g6	Induction Hardened (58HRC~)	6 ～ 50	6 ～ 10	-	-	-	2 ～ 84	7 ～ 12	7 ～ 12	6 ～ 50	2 ～ 84	-	6 ～ 10	-
-	1 Piece(s)	6 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	13	25 ～ 980	g6	Induction Hardened (58HRC~)	6 ～ 50	6 ～ 10	-	6 ～ 10	-	2 ～ 84	7 ～ 12	7 ～ 12	6 ～ 50	2 ～ 84	-	-	-
-	1 Piece(s)	6 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Induction Hardened	Hard Chrome Plating	13	25 ～ 980	g6	Induction Hardened (58HRC~)	6 ～ 50	6 ～ 10	-	-	10	2 ～ 84	7 ～ 12	7 ～ 12	6 ～ 50	2 ～ 84	-	-	-

1
2
3
4
5
Next >>

Example

Product TOP

Basic Information

End Shape (Left)	Threaded	Shaft End Perpendicularity	Perpendicularity (0.2)

Configure

1,548 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Basic Shape
- One End Stepped
- Both Ends Stepped
Clear
End Shape (Right)
- No Machining
- Threaded
Clear
Material
- Steel
  - SUJ2 Equivalent
  - S45C Equivalent
- Stainless Steel
  - SUS304
  - SUS440C or 13Cr stainless
Clear
Heat Treatment
- Not Provided
- Induction Hardened
Clear
Surface Treatment
- Not Provided
- Hard Chrome Plating
- Low Temperature Black Chrome Plating
Clear
Shaft Dia. D(Ø)
8

10

12

13

15

16

18

20

25

30

35

40

50
Clear
Length L(mm)
[25-1500/1mm Unit(s)]
Clear
Shaft Fit Tolerance
f8

g6

h5
Clear
Hardness
- Induction Hardened (56HRC~)
- Induction Hardened (58HRC~)
- No Induction Hardening
Clear
B(mm)
[5-210/1mm Unit(s)]
Clear
Change Thread M to Fine One [MMC](mm)
6

8

10

12

15

16

17

20

25

30
Clear
Change Thread M to Fine One [MMS](mm)
10

12

14

18
Clear
Change Thread N to Fine One [NMC](mm)
6

8

10

12

15

16

17

20

25

30
Clear
Change Thread N to Fine One [NMS](mm)
10

12

14

18
Clear
F(mm)
[2-343/1mm Unit(s)]
Clear
P(mm)
7

8

9

10

11
[7-49/1mm Unit(s)]
Clear
Q(mm)
7

8

9

10

11
[7-49/1mm Unit(s)]
Clear
S(mm)
[6-210/1mm Unit(s)]
Clear
T(mm)
[2-343/1mm Unit(s)]
Clear
Threaded (Coarse) [M](mm)
6

8

10

12

16

20

24

30
Clear
Threaded (Coarse) [N](mm)
6

8

10

12

16

20

24

30
Clear
Tapped (Coarse Theread)(mm)
5

6

8

10

12

16
Clear
type
- PSFAF
- PSFAX
- PSFGF
- PSFGX
- PSFUF
- PSFUX
- PSSFAF
- PSSFAX
- PSSFGF
- PSSFGX
- PSSFUF
- PSSFUX
- RSFAF
- RSFAX
- SFAF
- SFAX
- SFUF
- SFUX
- SSFAF
- SSFAX
- SSFUF
- SSFUX
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

6 Day(s) or Less

11 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Additional Products in this Category

Complementary Products

Shaft Supports T-Shaped Slit (Machined) - Standard / Wide
MISUMI Days to Ship : 4 Day(s) or more
Oil Free Bushing Housing Units - Standard Flanged - Standard - Built-In Copper Alloy Bushings, Single / Double
MISUMI Standard Price : MYR 35.15- Days to Ship : 2 Day(s) or more
Shaft Collar (Wedge) - 2-Hole / 2-Tapped (Coarse)
MISUMI Standard Price : MYR 32.46- Days to Ship : 2 Day(s) or more
Shaft-sliding Linear Bushing Housing Units - Single / Double
MISUMI Standard Price : MYR 65.47- Days to Ship : 1 Day(s) or more
Linear Bushings - Single
MISUMI Standard Price : MYR 13.98- Days to Ship : 1 Day(s) or more

Customers Who Viewed This Item Also Viewed

Linear Shafts-Both Ends Threaded
MISUMI

Days to Ship : 3 Day(s) or more
Linear Shafts - Shaft Ends Configurable
MISUMI

Days to Ship : 8 Day(s) or more
High Precision Linear Shafts - Stepped Ends / Stepped Ends with Wrench Flats - One End Threaded / Both Ends Threaded / One End Threaded / One End Tapped
MISUMI

Days to Ship : 7 Day(s) or more
Linear Shafts-Both Ends Stepped and Female Thread-
MISUMI

Days to Ship : 3 Day(s) or more
Linear Shafts One End Threaded with Undercut
MISUMI

Days to Ship : 6 Day(s) or more
Linear Shafts-One End Threaded
MISUMI

Days to Ship : 3 Day(s) or more
Precision Linear Shafts - One End Male Thread One End Female Thread Type with Undercut - Wrench Flat Type
MISUMI

Days to Ship : 6 Day(s) or more
Linear Shafts-One End Threaded with Wrench Flats / Cross-Drilled Hole
MISUMI

Days to Ship : 6 Day(s) or more
Linear Shafts-One End Stepped and Tapped, One End Threaded / One End Stepped, One End Threaded
MISUMI

Days to Ship : 3 Day(s) or more
Precision Linear Shafts - One End Stepped and Male Thread One End Female Thread Type
MISUMI

Days to Ship : 6 Day(s) or more
Rotary Shafts - One End Stepped and Threaded
MISUMI

Days to Ship : 3 Day(s) or more
Linear Shafts-Both Ends Threaded with Wrench Flats / Cross-Drilled Hole
MISUMI

Days to Ship : 6 Day(s) or more

back next

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations): Tel：(60) 3 7890 6399; 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday); Technical Inquiry

How can we improve?

Linear Shafts-One End Stepped and Threaded / Both Ends Stepped and Threaded

Specifications

Alterations

Part Number

Example

Basic Information

Configure

Specification/Dimensions

Basic Shape

End Shape (Right)

Material

Heat Treatment

Surface Treatment

Shaft Dia. D(Ø)

Length L(mm)

Shaft Fit Tolerance

Hardness

B(mm)

Change Thread M to Fine One [MMC](mm)

Change Thread M to Fine One [MMS](mm)

Change Thread N to Fine One [NMC](mm)

Change Thread N to Fine One [NMS](mm)

F(mm)

P(mm)

Q(mm)

S(mm)

T(mm)

Threaded (Coarse) [M](mm)

Threaded (Coarse) [N](mm)

Tapped (Coarse Theread)(mm)

type

CAD

Days to Ship

Specify Alterations

Additional Products in this Category

Complementary Products

Customers Who Viewed This Item Also Viewed

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm