(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Webcode Seach | Series
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

Loading

  • [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

  • How can we improve?

    How can we improve?

    Comments
    Name (Optional)
    E-mail Address (Optional)
    Tel (Optional)

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Customer Privacy Policy

    Thank you for your cooperation.

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Please use the inquiry form.

    Customer Privacy Policy

Linear Shafts-One End Threaded (Part Numbers)

Linear Shafts-One End Threaded

MISUMI

MISUMI

[Features]A shaft with a male thread on one end (linear shaft, hardened shaft, guide shaft, slide shaft). L size standard expanded! You can now purchase from an even more complete lineup.

PDFP.1-191-2015

Part Number

Configured Part Number is shown.

One End Threaded:Related Image

Type[ M ]Material[ H ]Hardness[ S ]Surface Treatment
D Tol. g6D Tol. h5D Tol. f8
SFANSFUN-SUJ2 EquivalentEffective Hardened Depth of Induction Hardening >> P.142
SUJ2 Equivalent: 58HRC~
SUS440C or 13Cr stainless: 56HRC~		-
SSFANSSFUN-SUS440C or 13Cr stainless
PSFANPSFUN-SUJ2 EquivalentHard Chrome Plating - Plating Hardness: HV750 ~, Plating Thickness: 5µ or More
PSSFANPSSFUN-SUS440C or 13Cr stainless
RSFAN--SUJ2 EquivalentLow Temp. Black Chrome Plating
--PSFGNS45C Equivalent-Hard Chrome Plating - Plating Hardness: HV750 ~, Plating Thickness: 10µ or More
--PSSFGNSUS304

[ ! ]Annealing may lower hardness at shaft end machined areas (effective thread length + approx. 10mm).
[ ! ]Features of Low Temp. Black Chrome Plating p1_142
[ ! ]L Dimension Tolerance, Circularity, Straightness, Perpendicularity, Concentricity and Changes in Hardness >> P.141

Specifications

Part Number-L-F-B-P
SFAN12-500-F20-B15-P6
SFUN8-150-F20-B15-P6
 
Part Number1mm IncrementP SelectionD Tol.(Y)Max.RC
TypeDLFBg6h5f8
(D Tol. g6)
SFAN
SSFAN
PSFAN
PSSFAN


(D Tol. f8)
PSFGN (D≥6)
PSSFGN (D≥6)		(D Tol. h5)
SFUN
SSFUN
PSFUN
PSSFUN



 		425~ 2982≤F≤Px5(When P≤6)
B≤F-2

(When P=8, 10)
B≤F-3

(When P≥12)
B≤F-5

(W/o Threads)
B=0

[ ! ]B≥Pitchx3		3          -0.004
-0.012		0
-0.005		-3000.2 or Less0.2 or Less
525~ 39834         -0.004
-0.012		0
-0.005		-4000.2 or Less0.2 or Less
625~ 798345        -0.004
-0.012		0
-0.005		-0.010
-0.028		6000.3 or Less0.5 or Less
825~ 9983456       -0.005
-0.014		0
-0.006		-0.013
-0.035		8000.3 or Less0.5 or Less
1025~ 998 4568      -0.005
-0.014		0
-0.006		-0.013
-0.035		8000.3 or Less0.5 or Less
1225~1198  56810     -0.006
-0.017		0
-0.008		-0.016
-0.043		10000.3 or Less0.5 or Less
1325~1198  5681012    -0.006
-0.017		0
-0.008		-0.016
-0.043		10000.3 or Less0.5 or Less
1525~1198  5681012    -0.006
-0.017		0
-0.008		-0.016
-0.043		10000.3 or Less0.5 or Less
1625~1198  5681012    -0.006
-0.017		0
-0.008		-0.016
-0.043		12000.3 or Less0.5 or Less
1825~1198  568101216   -0.006
-0.017		0
-0.008		-0.016
-0.043		12000.3 or Less0.5 or Less
2025~1198   68101216   -0.007
-0.020		0
-0.009		-0.020
-0.053		12000.3 or Less1.0 or Less
2525~1198    81012162024 -0.007
-0.020		0
-0.009		-0.020
-0.053		12000.3 or Less1.0 or Less
3025~1498    81012162024 -0.007
-0.020		0
-0.009		-0.020
-0.053		15000.3 or Less1.0 or Less
3525~1498     101216202430-0.009
-0.025		0
-0.011		-0.025
-0.064		15000.5 or Less1.0 or Less
4025~1498      1216202430-0.009
-0.025		0
-0.011		-0.025
-0.064		15000.5 or Less1.0 or Less
5025~1498       16202430-0.009
-0.025		0
-0.011		-0.025
-0.064		15000.5 or Less1.0 or Less
[ ! ]For O.D. tolerance f8 type, D needs to be 6 or more.
 
Part Number1mm IncrementP SelectionD Tol.(Y)Max.RC
TypeDLFBg6
(D Tol. g6)
Low Temp. Black Chrome Plating
RSFAN		425~2982≤F≤Px5(When P≤6)
B≤F-2

(When P=8, 10)
B≤F-3

(When P≥12)
B≤F-5

[ ! ]B≥Pitchx3		3         -0.004
-0.012		3000.2 or Less0.2 or Less
525~39834        -0.004
-0.012		4000.2 or Less0.2 or Less
625~500345       -0.004
-0.012		6000.3 or Less0.5 or Less
825~5003456      -0.005
-0.014		8000.3 or Less0.5 or Less
1025~500 4568     -0.005
-0.014		8000.3 or Less0.5 or Less
1225~500  56810    -0.006
-0.017		10000.3 or Less0.5 or Less
1325~500  5681012   -0.006
-0.017		10000.3 or Less0.5 or Less
1525~500  5681012   -0.006
-0.017		10000.3 or Less0.5 or Less
1625~500  5681012   -0.006
-0.017		12000.3 or Less0.5 or Less
1825~500  568101216  -0.006
-0.017		12000.3 or Less0.5 or Less
2025~500   68101216  -0.007
-0.020		12000.3 or Less1.0 or Less
2525~500    81012162024-0.007
-0.020		12000.3 or Less1.0 or Less
3025~500    81012162024-0.007
-0.020		15000.3 or Less1.0 or Less
 
Coarse Thread Dimension
Mpitch
30.5
40.7
50.8
61.0
81.25
101.5
121.75
162.0
202.5
243.0
303.5

■Details of male thread C chamfer
Thread nominal
M		Pitch
P		Chamfer C
(reference value)
30.500.50
40.700.75
50.800.75
61.001.00
81.251.25
101.501.50
121.751.75
162.002.00
202.502.50
243.003.00
303.503.50

Alterations

One End Threaded:Related Image

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...

CAD Download

30
60
90
  1. << Prev
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. Next >>
Part Number
SFUN10-[25-1198/1]-F[2-70/1]-B[2-70/1]-PMS10
SFUN12-[25-1398/1]-F[2-84/1]-B[2-84/1]-P[3,​4,​5,​6,​8,​10]
SFUN12-[25-1398/1]-F[2-84/1]-B[2-84/1]-PMC[5,​6,​8,​10]
SFUN12-[25-1398/1]-F[2-84/1]-B[2-84/1]-PMS[10,​12]
SFUN13-[25-1398/1]-F[2-84/1]-B[2-79/1]-P[4,​5,​6,​8,​10,​12]
SFUN13-[25-1398/1]-F[2-84/1]-B[2-79/1]-PMC[5,​6,​8,​10]
SFUN13-[25-1398/1]-F[2-84/1]-B[2-79/1]-PMS[10,​12]
SFUN15-[25-1398/1]-F[2-84/1]-B[2-84/1]-P[4,​5,​6,​8,​10,​12]
SFUN15-[25-1398/1]-F[2-84/1]-B[2-84/1]-PMC[5,​6,​8,​10,​12]
SFUN15-[25-1398/1]-F[2-84/1]-B[2-84/1]-PMS[10,​12,​14]
SFUN16-[25-1398/1]-F[2-112/1]-B[2-107/1]-P[4,​5,​6,​8,​10,​12]
SFUN16-[25-1398/1]-F[2-112/1]-B[2-107/1]-PMC[5,​6,​8,​10,​12,​15]
SFUN16-[25-1398/1]-F[2-112/1]-B[2-107/1]-PMS[10,​12,​14]
SFUN18-[25-1398/1]-F[2-112/1]-B[2-107/1]-P[5,​6,​8,​10,​12,​16]
SFUN18-[25-1398/1]-F[2-112/1]-B[2-107/1]-PMC[5,​6,​8,​10,​12,​15,​17]
SFUN18-[25-1398/1]-F[2-112/1]-B[2-107/1]-PMS[10,​12,​14,​18]
SFUN20-[25-1398/1]-F[2-140/1]-B[2-135/1]-P[5,​6,​8,​10,​12,​16]
SFUN20-[25-1398/1]-F[2-140/1]-B[2-135/1]-PMC[6,​8,​10,​12,​15,​17]
SFUN20-[25-1398/1]-F[2-140/1]-B[2-135/1]-PMS[10,​12,​14,​18]
SFUN25-[25-1398/1]-F[2-168/1]-B[2-163/1]-P[6,​8,​10,​12,​16,​20,​24]
SFUN25-[25-1398/1]-F[2-168/1]-B[2-163/1]-PMC[8,​10,​12,​15,​17,​20]
SFUN25-[25-1398/1]-F[2-168/1]-B[2-163/1]-PMS[10,​12,​14,​18]
SFUN30-[25-1498/1]-F[2-210/1]-B[2-205/1]-P[8,​10,​12,​16,​20,​24]
SFUN30-[25-1498/1]-F[2-210/1]-B[2-205/1]-PMC[8,​10,​12,​15,​17,​20,​25]
SFUN30-[25-1498/1]-F[2-210/1]-B[2-205/1]-PMS[10,​12,​14,​18]
SFUN35-[25-1498/1]-F[2-210/1]-B[2-205/1]-P[10,​12,​16,​20,​24,​30]
SFUN35-[25-1498/1]-F[2-210/1]-B[2-205/1]-PMC[10,​12,​15,​17,​20,​25]
SFUN35-[25-1498/1]-F[2-210/1]-B[2-205/1]-PMS[10,​12,​14,​18]
SFUN40-[25-1498/1]-F[2-210/1]-B[2-205/1]-P[12,​16,​20,​24,​30]
SFUN40-[25-1498/1]-F[2-210/1]-B[2-205/1]-PMC[12,​15,​17,​20,​25,​30]
SFUN40-[25-1498/1]-F[2-210/1]-B[2-205/1]-PMS[12,​14,​18]
SFUN50-[25-1498/1]-F[2-210/1]-B[2-205/1]-P[16,​20,​24,​30]
SFUN50-[25-1498/1]-F[2-210/1]-B[2-205/1]-PMC[15,​17,​20,​25,​30]
SFUN50-[25-1498/1]-F[2-210/1]-B[2-205/1]-PMS[14,​18]
SSFAN4-[25-298/1]-F[2-28/1]-B[2-28/1]-P3
SSFAN4-[25-298/1]-F[2-28/1]-B[2-28/1]-PMC3
SSFAN5-[25-398/1]-F[2-35/1]-B[2-35/1]-P[3,​4]
SSFAN5-[25-398/1]-F[2-35/1]-B[2-35/1]-PMC[3,​4,​5]
SSFAN6-[25-598/1]-F[2-30/1]-B[2-42/1]-P[3,​4,​5,​6]
SSFAN6-[25-598/1]-F[2-30/1]-B[2-42/1]-PMC[3,​4,​5,​6]
SSFAN6-[25-598/1]-F[2-30/1]-B[2-42/1]-PMS[4,​5,​6,​8]
SSFAN8-[25-798/1]-F[2-40/1]-B[2-53/1]-P[3,​4,​5,​6,​8]
SSFAN8-[25-798/1]-F[2-40/1]-B[2-53/1]-PMC[3,​4,​5,​6,​8]
SSFAN8-[25-798/1]-F[2-40/1]-B[2-53/1]-PMS[4,​5,​6,​8]
SSFAN10-[25-798/1]-F[2-50/1]-B[2-70/1]-P[4,​5,​6,​8,​10]
SSFAN10-[25-798/1]-F[2-50/1]-B[2-70/1]-PMC[4,​5,​6,​8,​10]
SSFAN10-[25-798/1]-F[2-50/1]-B[2-70/1]-PMS10
SSFAN12-[25-998/1]-F[2-60/1]-B[2-79/1]-P[5,​6,​8,​10,​12]
SSFAN12-[25-998/1]-F[2-60/1]-B[2-79/1]-PMC[5,​6,​8,​10,​12]
SSFAN12-[25-998/1]-F[2-60/1]-B[2-79/1]-PMS[10,​12]
SSFAN13-[25-998/1]-F[2-60/1]-B[2-79/1]-P[5,​6,​8,​10,​12]
SSFAN13-[25-998/1]-F[2-60/1]-B[2-79/1]-PMC[5,​6,​8,​10,​12]
SSFAN13-[25-998/1]-F[2-60/1]-B[2-79/1]-PMS[10,​12]
SSFAN15-[25-998/1]-F[2-84/1]-B[2-84/1]-P[5,​6,​8,​10,​12]
SSFAN15-[25-998/1]-F[2-84/1]-B[2-84/1]-PMC[5,​6,​8,​10,​12,​15]
SSFAN15-[25-998/1]-F[2-84/1]-B[2-84/1]-PMS[10,​12,​14]
SSFAN16-[25-1198/1]-F[2-80/1]-B[2-107/1]-P[5,​6,​8,​10,​12,​16]
SSFAN16-[25-1198/1]-F[2-80/1]-B[2-107/1]-PMC[5,​6,​8,​10,​12,​15]
SSFAN16-[25-1198/1]-F[2-80/1]-B[2-107/1]-PMS[10,​12,​14]
SSFAN18-[25-1198/1]-F[11-80/1]-B[2-107/1]-P[5,​6,​8,​10,​12,​16]
SSFAN18-[25-1198/1]-F[11-80/1]-B[2-107/1]-PMC[5,​6,​8,​10,​12,​15,​17]
SSFAN18-[25-1198/1]-F[11-80/1]-B[2-107/1]-PMS[10,​12,​14,​18]
SSFAN20-[25-1198/1]-F[2-100/1]-B[2-140/1]-P[6,​8,​10,​12,​16,​20]
SSFAN20-[25-1198/1]-F[2-100/1]-B[2-140/1]-PMC[6,​8,​10,​12,​15,​17,​20]
SSFAN20-[25-1198/1]-F[2-100/1]-B[2-140/1]-PMS[10,​12,​14,​18]
SSFAN25-[25-1198/1]-F[2-120/1]-B[2-163/1]-P[8,​10,​12,​16,​20,​24]
SSFAN25-[25-1198/1]-F[2-120/1]-B[2-163/1]-PMC[8,​10,​12,​15,​17,​20,​25]
SSFAN25-[25-1198/1]-F[2-120/1]-B[2-163/1]-PMS[10,​12,​14,​18]
SSFAN30-[25-1498/1]-F[2-210/1]-B[2-205/1]-P[8,​10,​12,​16,​20,​24]
SSFAN30-[25-1498/1]-F[2-210/1]-B[2-205/1]-PMC[8,​10,​12,​15,​17,​20,​25,​30]
SSFAN30-[25-1498/1]-F[2-210/1]-B[2-205/1]-PMS[10,​12,​14,​18]
SSFAN35-[25-1498/1]-F[2-210/1]-B[2-205/1]-P[10,​12,​16,​20,​24,​30]
SSFAN35-[25-1498/1]-F[2-210/1]-B[2-205/1]-PMC[10,​12,​15,​17,​20,​25,​30]
SSFAN35-[25-1498/1]-F[2-210/1]-B[2-205/1]-PMS[10,​12,​14,​18]
SSFAN40-[25-1498/1]-F[2-210/1]-B[2-205/1]-P[12,​16,​20,​24,​30]
SSFAN40-[25-1498/1]-F[2-210/1]-B[2-205/1]-PMC[12,​15,​17,​20,​25,​30]
SSFAN40-[25-1498/1]-F[2-210/1]-B[2-205/1]-PMS[12,​14,​18]
SSFAN50-[25-1498/1]-F[2-210/1]-B[2-205/1]-P[16,​20,​24,​30]
SSFAN50-[25-1498/1]-F[2-210/1]-B[2-205/1]-PMC[15,​17,​20,​25,​30]
SSFAN50-[25-1498/1]-F[2-210/1]-B[2-205/1]-PMS[14,​18]
SSFUN4-[25-298/1]-F[2-28/1]-B0-P3
SSFUN4-[25-298/1]-F[2-28/1]-B0-PMC3
SSFUN4-[25-298/1]-F[2-28/1]-B[2-28/1]-P3
SSFUN4-[25-298/1]-F[2-28/1]-B[2-28/1]-PMC3
SSFUN5-[25-398/1]-F[2-35/1]-B[2-35/1]-P[3,​4]
SSFUN5-[25-398/1]-F[2-35/1]-B[2-35/1]-PMC[3,​4]
SSFUN6-[25-898/1]-F[2-42/1]-B[2-42/1]-P[3,​4,​5]
SSFUN6-[25-898/1]-F[2-42/1]-B[2-42/1]-PMC[3,​4,​5]
SSFUN8-[25-1098/1]-F[2-56/1]-B[2-53/1]-P[3,​4,​5,​6]
SSFUN8-[25-1098/1]-F[2-56/1]-B[2-53/1]-PMC[3,​4,​5,​6]
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipRoHSMaterial Heat Treatment Surface Treatment Shaft Dia. D
(Ø) 		Length L
(mm) 		Shaft Fit Tolerance Hardness B
(mm) 		F
(mm) 		Fine Thread [PMC]
(mm) 		Fine Thread [PMS]
(mm) 		P
(mm)

-

1 Piece(s) 6 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedNot Provided1025 ～ 1198h5Induction Hardened (58HRC~)2 ～ 702 ～ 70-10-

-

1 Piece(s) 6 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedNot Provided1225 ～ 1398h5Induction Hardened (58HRC~)2 ～ 842 ～ 84--3 ～ 10

-

1 Piece(s) 6 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedNot Provided1225 ～ 1398h5Induction Hardened (58HRC~)2 ～ 842 ～ 845 ～ 10--

-

1 Piece(s) 6 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedNot Provided1225 ～ 1398h5Induction Hardened (58HRC~)2 ～ 842 ～ 84-10 ～ 12-

-

1 Piece(s) 6 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedNot Provided1325 ～ 1398h5Induction Hardened (58HRC~)2 ～ 792 ～ 84--4 ～ 12

-

1 Piece(s) 6 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedNot Provided1325 ～ 1398h5Induction Hardened (58HRC~)2 ～ 792 ～ 845 ～ 10--

-

1 Piece(s) 6 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedNot Provided1325 ～ 1398h5Induction Hardened (58HRC~)2 ～ 792 ～ 84-10 ～ 12-

-

1 Piece(s) 6 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedNot Provided1525 ～ 1398h5Induction Hardened (58HRC~)2 ～ 842 ～ 84--4 ～ 12

-

1 Piece(s) 6 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedNot Provided1525 ～ 1398h5Induction Hardened (58HRC~)2 ～ 842 ～ 845 ～ 12--

-

1 Piece(s) 6 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedNot Provided1525 ～ 1398h5Induction Hardened (58HRC~)2 ～ 842 ～ 84-10 ～ 14-

-

1 Piece(s) 6 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedNot Provided1625 ～ 1398h5Induction Hardened (58HRC~)2 ～ 1072 ～ 112--4 ～ 12

-

1 Piece(s) 6 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedNot Provided1625 ～ 1398h5Induction Hardened (58HRC~)2 ～ 1072 ～ 1125 ～ 15--

-

1 Piece(s) 6 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedNot Provided1625 ～ 1398h5Induction Hardened (58HRC~)2 ～ 1072 ～ 112-10 ～ 14-

-

1 Piece(s) 6 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedNot Provided1825 ～ 1398h5Induction Hardened (58HRC~)2 ～ 1072 ～ 112--5 ～ 16

-

1 Piece(s) 6 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedNot Provided1825 ～ 1398h5Induction Hardened (58HRC~)2 ～ 1072 ～ 1125 ～ 17--

-

1 Piece(s) 6 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedNot Provided1825 ～ 1398h5Induction Hardened (58HRC~)2 ～ 1072 ～ 112-10 ～ 18-

-

1 Piece(s) 6 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedNot Provided2025 ～ 1398h5Induction Hardened (58HRC~)2 ～ 1352 ～ 140--5 ～ 16

-

1 Piece(s) 6 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedNot Provided2025 ～ 1398h5Induction Hardened (58HRC~)2 ～ 1352 ～ 1406 ～ 17--

-

1 Piece(s) 6 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedNot Provided2025 ～ 1398h5Induction Hardened (58HRC~)2 ～ 1352 ～ 140-10 ～ 18-

-

1 Piece(s) 6 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedNot Provided2525 ～ 1398h5Induction Hardened (58HRC~)2 ～ 1632 ～ 168--6 ～ 24

-

1 Piece(s) 6 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedNot Provided2525 ～ 1398h5Induction Hardened (58HRC~)2 ～ 1632 ～ 1688 ～ 20--

-

1 Piece(s) 6 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedNot Provided2525 ～ 1398h5Induction Hardened (58HRC~)2 ～ 1632 ～ 168-10 ～ 18-

-

1 Piece(s) 6 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedNot Provided3025 ～ 1498h5Induction Hardened (58HRC~)2 ～ 2052 ～ 210--8 ～ 24

-

1 Piece(s) 6 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedNot Provided3025 ～ 1498h5Induction Hardened (58HRC~)2 ～ 2052 ～ 2108 ～ 25--

-

1 Piece(s) 6 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedNot Provided3025 ～ 1498h5Induction Hardened (58HRC~)2 ～ 2052 ～ 210-10 ～ 18-

-

1 Piece(s) 6 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedNot Provided3525 ～ 1498h5Induction Hardened (58HRC~)2 ～ 2052 ～ 210--10 ～ 30

-

1 Piece(s) 6 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedNot Provided3525 ～ 1498h5Induction Hardened (58HRC~)2 ～ 2052 ～ 21010 ～ 25--

-

1 Piece(s) 6 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedNot Provided3525 ～ 1498h5Induction Hardened (58HRC~)2 ～ 2052 ～ 210-10 ～ 18-

-

1 Piece(s) 6 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedNot Provided4025 ～ 1498h5Induction Hardened (58HRC~)2 ～ 2052 ～ 210--12 ～ 30

-

1 Piece(s) 6 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedNot Provided4025 ～ 1498h5Induction Hardened (58HRC~)2 ～ 2052 ～ 21012 ～ 30--

-

1 Piece(s) 6 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedNot Provided4025 ～ 1498h5Induction Hardened (58HRC~)2 ～ 2052 ～ 210-12 ～ 18-

-

1 Piece(s) 6 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedNot Provided5025 ～ 1498h5Induction Hardened (58HRC~)2 ～ 2052 ～ 210--16 ～ 30

-

1 Piece(s) 6 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedNot Provided5025 ～ 1498h5Induction Hardened (58HRC~)2 ～ 2052 ～ 21015 ～ 30--

-

1 Piece(s) 6 Day(s) or more 10[Steel] SUJ2 EquivalentInduction HardenedNot Provided5025 ～ 1498h5Induction Hardened (58HRC~)2 ～ 2052 ～ 210-14 ～ 18-

-

1 Piece(s) 7 Day(s) 10[Stainless Steel] SUS440C or 13Cr stainlessInduction HardenedNot Provided425 ～ 298g6Induction Hardened (56HRC~)0 ～ 282 ～ 28--3

-

1 Piece(s) 7 Day(s) 10[Stainless Steel] SUS440C or 13Cr stainlessInduction HardenedNot Provided425 ～ 298g6Induction Hardened (56HRC~)0 ～ 282 ～ 283--

-

1 Piece(s) 7 Day(s) 10[Stainless Steel] SUS440C or 13Cr stainlessInduction HardenedNot Provided525 ～ 398g6Induction Hardened (56HRC~)0 ～ 352 ～ 35--3 ～ 4

-

1 Piece(s) 7 Day(s) 10[Stainless Steel] SUS440C or 13Cr stainlessInduction HardenedNot Provided525 ～ 398g6Induction Hardened (56HRC~)0 ～ 352 ～ 353 ～ 5--

-

1 Piece(s) 3 Day(s) 10[Stainless Steel] SUS440C or 13Cr stainlessInduction HardenedNot Provided625 ～ 598g6Induction Hardened (56HRC~)0 ～ 422 ～ 30--3 ～ 6

-

1 Piece(s) 3 Day(s) 10[Stainless Steel] SUS440C or 13Cr stainlessInduction HardenedNot Provided625 ～ 598g6Induction Hardened (56HRC~)0 ～ 422 ～ 303 ～ 6--

-

1 Piece(s) 3 Day(s) 10[Stainless Steel] SUS440C or 13Cr stainlessInduction HardenedNot Provided625 ～ 598g6Induction Hardened (56HRC~)0 ～ 422 ～ 30-4 ～ 8-

-

1 Piece(s) 3 Day(s) 10[Stainless Steel] SUS440C or 13Cr stainlessInduction HardenedNot Provided825 ～ 798g6Induction Hardened (56HRC~)0 ～ 532 ～ 40--3 ～ 8

-

1 Piece(s) 3 Day(s) 10[Stainless Steel] SUS440C or 13Cr stainlessInduction HardenedNot Provided825 ～ 798g6Induction Hardened (56HRC~)0 ～ 532 ～ 403 ～ 8--

-

1 Piece(s) 3 Day(s) 10[Stainless Steel] SUS440C or 13Cr stainlessInduction HardenedNot Provided825 ～ 798g6Induction Hardened (56HRC~)0 ～ 532 ～ 40-4 ～ 8-

-

1 Piece(s) 3 Day(s) 10[Stainless Steel] SUS440C or 13Cr stainlessInduction HardenedNot Provided1025 ～ 798g6Induction Hardened (56HRC~)0 ～ 702 ～ 50--4 ～ 10

-

1 Piece(s) 3 Day(s) 10[Stainless Steel] SUS440C or 13Cr stainlessInduction HardenedNot Provided1025 ～ 798g6Induction Hardened (56HRC~)0 ～ 702 ～ 504 ～ 10--

-

1 Piece(s) 3 Day(s) 10[Stainless Steel] SUS440C or 13Cr stainlessInduction HardenedNot Provided1025 ～ 798g6Induction Hardened (56HRC~)0 ～ 702 ～ 50-10-

-

1 Piece(s) 3 Day(s) 10[Stainless Steel] SUS440C or 13Cr stainlessInduction HardenedNot Provided1225 ～ 998g6Induction Hardened (56HRC~)0 ～ 792 ～ 60--5 ～ 12

-

1 Piece(s) 3 Day(s) 10[Stainless Steel] SUS440C or 13Cr stainlessInduction HardenedNot Provided1225 ～ 998g6Induction Hardened (56HRC~)0 ～ 792 ～ 605 ～ 12--

-

1 Piece(s) 3 Day(s) 10[Stainless Steel] SUS440C or 13Cr stainlessInduction HardenedNot Provided1225 ～ 998g6Induction Hardened (56HRC~)0 ～ 792 ～ 60-10 ～ 12-

-

1 Piece(s) 3 Day(s) 10[Stainless Steel] SUS440C or 13Cr stainlessInduction HardenedNot Provided1325 ～ 998g6Induction Hardened (56HRC~)0 ～ 792 ～ 60--5 ～ 12

-

1 Piece(s) 3 Day(s) 10[Stainless Steel] SUS440C or 13Cr stainlessInduction HardenedNot Provided1325 ～ 998g6Induction Hardened (56HRC~)0 ～ 792 ～ 605 ～ 12--

-

1 Piece(s) 3 Day(s) 10[Stainless Steel] SUS440C or 13Cr stainlessInduction HardenedNot Provided1325 ～ 998g6Induction Hardened (56HRC~)0 ～ 792 ～ 60-10 ～ 12-

-

1 Piece(s) 6 Day(s) 10[Stainless Steel] SUS440C or 13Cr stainlessInduction HardenedNot Provided1525 ～ 998g6Induction Hardened (56HRC~)0 ～ 842 ～ 84--5 ～ 12

-

1 Piece(s) 6 Day(s) 10[Stainless Steel] SUS440C or 13Cr stainlessInduction HardenedNot Provided1525 ～ 998g6Induction Hardened (56HRC~)0 ～ 842 ～ 845 ～ 15--

-

1 Piece(s) 6 Day(s) 10[Stainless Steel] SUS440C or 13Cr stainlessInduction HardenedNot Provided1525 ～ 998g6Induction Hardened (56HRC~)0 ～ 842 ～ 84-10 ～ 14-

-

1 Piece(s) 3 Day(s) 10[Stainless Steel] SUS440C or 13Cr stainlessInduction HardenedNot Provided1625 ～ 1198g6Induction Hardened (56HRC~)0 ～ 1072 ～ 80--5 ～ 16

-

1 Piece(s) 3 Day(s) 10[Stainless Steel] SUS440C or 13Cr stainlessInduction HardenedNot Provided1625 ～ 1198g6Induction Hardened (56HRC~)0 ～ 1072 ～ 805 ～ 15--

-

1 Piece(s) 3 Day(s) 10[Stainless Steel] SUS440C or 13Cr stainlessInduction HardenedNot Provided1625 ～ 1198g6Induction Hardened (56HRC~)0 ～ 1072 ～ 80-10 ～ 14-

-

1 Piece(s) 3 Day(s) 10[Stainless Steel] SUS440C or 13Cr stainlessInduction HardenedNot Provided1825 ～ 1198g6Induction Hardened (56HRC~)0 ～ 10711 ～ 80--5 ～ 16

-

1 Piece(s) 3 Day(s) 10[Stainless Steel] SUS440C or 13Cr stainlessInduction HardenedNot Provided1825 ～ 1198g6Induction Hardened (56HRC~)0 ～ 10711 ～ 805 ～ 17--

-

1 Piece(s) 3 Day(s) 10[Stainless Steel] SUS440C or 13Cr stainlessInduction HardenedNot Provided1825 ～ 1198g6Induction Hardened (56HRC~)0 ～ 10711 ～ 80-10 ～ 18-

-

1 Piece(s) 3 Day(s) 10[Stainless Steel] SUS440C or 13Cr stainlessInduction HardenedNot Provided2025 ～ 1198g6Induction Hardened (56HRC~)0 ～ 1402 ～ 100--6 ～ 20

-

1 Piece(s) 3 Day(s) 10[Stainless Steel] SUS440C or 13Cr stainlessInduction HardenedNot Provided2025 ～ 1198g6Induction Hardened (56HRC~)0 ～ 1402 ～ 1006 ～ 20--

-

1 Piece(s) 3 Day(s) 10[Stainless Steel] SUS440C or 13Cr stainlessInduction HardenedNot Provided2025 ～ 1198g6Induction Hardened (56HRC~)0 ～ 1402 ～ 100-10 ～ 18-

-

1 Piece(s) 6 Day(s) 10[Stainless Steel] SUS440C or 13Cr stainlessInduction HardenedNot Provided2525 ～ 1198g6Induction Hardened (56HRC~)0 ～ 1632 ～ 120--8 ～ 24

-

1 Piece(s) 6 Day(s) 10[Stainless Steel] SUS440C or 13Cr stainlessInduction HardenedNot Provided2525 ～ 1198g6Induction Hardened (56HRC~)0 ～ 1632 ～ 1208 ～ 25--

-

1 Piece(s) 6 Day(s) 10[Stainless Steel] SUS440C or 13Cr stainlessInduction HardenedNot Provided2525 ～ 1198g6Induction Hardened (56HRC~)0 ～ 1632 ～ 120-10 ～ 18-

-

1 Piece(s) 6 Day(s) 10[Stainless Steel] SUS440C or 13Cr stainlessInduction HardenedNot Provided3025 ～ 1498g6Induction Hardened (56HRC~)0 ～ 2052 ～ 210--8 ～ 24

-

1 Piece(s) 6 Day(s) 10[Stainless Steel] SUS440C or 13Cr stainlessInduction HardenedNot Provided3025 ～ 1498g6Induction Hardened (56HRC~)0 ～ 2052 ～ 2108 ～ 30--

-

1 Piece(s) 6 Day(s) 10[Stainless Steel] SUS440C or 13Cr stainlessInduction HardenedNot Provided3025 ～ 1498g6Induction Hardened (56HRC~)0 ～ 2052 ～ 210-10 ～ 18-

-

1 Piece(s) 6 Day(s) or more 10[Stainless Steel] SUS440C or 13Cr stainlessInduction HardenedNot Provided3525 ～ 1498g6Induction Hardened (56HRC~)2 ～ 2052 ～ 210--10 ～ 30

-

1 Piece(s) 6 Day(s) or more 10[Stainless Steel] SUS440C or 13Cr stainlessInduction HardenedNot Provided3525 ～ 1498g6Induction Hardened (56HRC~)2 ～ 2052 ～ 21010 ～ 30--

-

1 Piece(s) 6 Day(s) or more 10[Stainless Steel] SUS440C or 13Cr stainlessInduction HardenedNot Provided3525 ～ 1498g6Induction Hardened (56HRC~)2 ～ 2052 ～ 210-10 ～ 18-

-

1 Piece(s) 6 Day(s) or more 10[Stainless Steel] SUS440C or 13Cr stainlessInduction HardenedNot Provided4025 ～ 1498g6Induction Hardened (56HRC~)2 ～ 2052 ～ 210--12 ～ 30

-

1 Piece(s) 6 Day(s) or more 10[Stainless Steel] SUS440C or 13Cr stainlessInduction HardenedNot Provided4025 ～ 1498g6Induction Hardened (56HRC~)2 ～ 2052 ～ 21012 ～ 30--

-

1 Piece(s) 6 Day(s) or more 10[Stainless Steel] SUS440C or 13Cr stainlessInduction HardenedNot Provided4025 ～ 1498g6Induction Hardened (56HRC~)2 ～ 2052 ～ 210-12 ～ 18-

-

1 Piece(s) 6 Day(s) or more 10[Stainless Steel] SUS440C or 13Cr stainlessInduction HardenedNot Provided5025 ～ 1498g6Induction Hardened (56HRC~)2 ～ 2052 ～ 210--16 ～ 30

-

1 Piece(s) 6 Day(s) or more 10[Stainless Steel] SUS440C or 13Cr stainlessInduction HardenedNot Provided5025 ～ 1498g6Induction Hardened (56HRC~)2 ～ 2052 ～ 21015 ～ 30--

-

1 Piece(s) 6 Day(s) or more 10[Stainless Steel] SUS440C or 13Cr stainlessInduction HardenedNot Provided5025 ～ 1498g6Induction Hardened (56HRC~)2 ～ 2052 ～ 210-14 ～ 18-

-

1 Piece(s) 6 Day(s) or more 10[Stainless Steel] SUS440C or 13Cr stainlessInduction HardenedNot Provided425 ～ 298h5Induction Hardened (56HRC~)02 ～ 28--3

-

1 Piece(s) 6 Day(s) or more 10[Stainless Steel] SUS440C or 13Cr stainlessInduction HardenedNot Provided425 ～ 298h5Induction Hardened (56HRC~)02 ～ 283--

-

1 Piece(s) 6 Day(s) or more 10[Stainless Steel] SUS440C or 13Cr stainlessInduction HardenedNot Provided425 ～ 298h5Induction Hardened (56HRC~)2 ～ 282 ～ 28--3

-

1 Piece(s) 6 Day(s) or more 10[Stainless Steel] SUS440C or 13Cr stainlessInduction HardenedNot Provided425 ～ 298h5Induction Hardened (56HRC~)2 ～ 282 ～ 283--

-

1 Piece(s) 6 Day(s) or more 10[Stainless Steel] SUS440C or 13Cr stainlessInduction HardenedNot Provided525 ～ 398h5Induction Hardened (56HRC~)2 ～ 352 ～ 35--3 ～ 4

-

1 Piece(s) 6 Day(s) or more 10[Stainless Steel] SUS440C or 13Cr stainlessInduction HardenedNot Provided525 ～ 398h5Induction Hardened (56HRC~)2 ～ 352 ～ 353 ～ 4--

-

1 Piece(s) 6 Day(s) or more 10[Stainless Steel] SUS440C or 13Cr stainlessInduction HardenedNot Provided625 ～ 898h5Induction Hardened (56HRC~)2 ～ 422 ～ 42--3 ～ 5

-

1 Piece(s) 6 Day(s) or more 10[Stainless Steel] SUS440C or 13Cr stainlessInduction HardenedNot Provided625 ～ 898h5Induction Hardened (56HRC~)2 ～ 422 ～ 423 ～ 5--

-

1 Piece(s) 6 Day(s) or more 10[Stainless Steel] SUS440C or 13Cr stainlessInduction HardenedNot Provided825 ～ 1098h5Induction Hardened (56HRC~)2 ～ 532 ～ 56--3 ～ 6

-

1 Piece(s) 6 Day(s) or more 10[Stainless Steel] SUS440C or 13Cr stainlessInduction HardenedNot Provided825 ～ 1098h5Induction Hardened (56HRC~)2 ～ 532 ～ 563 ～ 6--

Loading...

  1. << Prev
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. Next >>

Additional work details

- For details on alterations, please see the tab below.
 *If multiple alterations are selected, the relative positions of the processed parts must be spaced at least 2mm apart.
 *If alterations are selected, the relative positions of the wrench grooves and drilled holes must be spaced at least 2mm apart.
 *Hardness may decrease due to alterations. For information on hardness and surface treatment, please see here .

Alteration
code		Additional work detailsFixed DimensionsApplicable conditionsExample of specification￥/1Code
LKC

L dimension and tolerance

Change to precision

Shaft, One-end male thread type Related image 1_Additional processing details

・L<200→L±0.03
・200≦L＜500→L±0.05
・L≧500→L±0.1		[ ! ] L dimension can be specified in 0.1mm increments.

[ NG ] Not applicable when DP≦2.		SFAN30-250.2-F40-B30-P10-LKC400
FC

Add one flat surface

Shaft, One-end male thread type Related image 2_Additional processing details

Dh
4-50.5
6 to 181
20 to 402
503
[ ! ] FC,E = Specify in 1mm increments
[ ! ] D≦30: FC≦5×D,
D≧35: FC≦3×D
[ ! ] E=0 or E≧2

[ NG ] Cannot be used in combination with WFC		SFAN30-250-F40-B30-P10-FC10-E8200
WFC

Two flat chamfers added

Shaft, One-end male thread type Related image 3_Additional processing details

Dh
4-50.5
6 to 181
20 to 402
503
[ ! ] WFC, A, E = Specify in 1mm increments
[ ! ] D≦30: WFC≦5×D,
D≧35: WFC≦3×D
[ ! ] A(E) = 0 or A(E)≧2

[ NG ] There will be a deviation in the angle of the alteration, so
they will not be on the same plane.
[ NG ] Cannot be used in conjunction with FC		SFAN30-250-F40-B30-P10-WFC8-A8-E4400
RC

Add one 90 degree flat

Shaft, One-end male thread type Related image 4_Additional processing details

Db1h
1060.5
12 to 201.0
twenty five10
3012
[ ! ] D = 10 to 30 applicable
[ ! ] RC = specified in 1 mm increments
[ ! ] RC + b1≦L
[ ! ] RC≧2

[ NG ] Cannot be used in combination with WRC		SFAN30-250-F40-B30-P10-RC10500
WRC

Two 90-degree flats added

Shaft, One-end male thread type Related image 5_Additional processing details

Db1h
1060.5
12 to 201.0
twenty five10
3012
[ ! ] D = 10 to 30 applicable
[ ! ] WRC = specified in 1 mm increments
[ ! ] WRC + b1 ≦ L
[ ! ] WRC (Y) ≧ 2

[ NG ] There will be a deviation in the angle of the alteration, so
they will not be on the same plane.
[ NG ] Cannot be used in combination with RC		SFAN30-250-F40-B30-P10-WRC10-Y101,000
PMC
PMS

Shaft, One-end male thread type Related image 6_Additional processing details

DPMCPMS
434              
5345             
63456            
834568           
10 456810      10   
12  5681012     1012  
13  5681012     10   
15  568101215    1012  
16  568101215    101214 
18  56810121517   10121418
20   681012151720  10121418
twenty five    81012151720twenty five 10121418
30    81012151720twenty five3010121418
35     1012151720twenty five3010121418
40      12151720twenty five30 121418
50       151720twenty five30  1418
pitch0.350.50.751.01.51.251.5
[Bearing nut fine machining]
Specify "PMC"

[Cylinder fine machining]
Specify "PMS"		SFAN30-250-F40-B30-PMC15300
KC

One additional keyway

Shaft, One-end male thread type Related image 7_Additional processing details

Shaft, One-end male thread type Related image 9_Additional processing details
Shaft diameterbtr
Reference dimensionsTolerance (N9)Reference dimensionsTolerance
1240-0.03
​		2.5+0.1
0		0.08 to 0.16
1653.00.16 to 0.25
2063.5
twenty five80
-0.036		4.0+0.2
0
30

When KC + G ≥ L, the keyway will have the shape shown below.

Ex.)Shaft, One-end male thread type Related image 9-1_Additional processing details

[ ! ] Applies only to D=12, 16, 20, 25, and 30
[ ! ] KC and G = Specify in 1mm increments
[ ! ] b≦G≦30, G≦L/3
[ ! ] L＞500: 2≦KC≦L/3
L＜500: 2≦KC≦500
[ ! ] M×2＜KC+F		SFAN30-250-F40-B30-P10-KC10-G10500

 

Roundness (M), straightness (K), L dimension tolerance, squareness

Shaft, One-end male thread type Related image 1_Circularity

■Straightness measurement method

Shaft, One-end male thread type Related image 2_Circularity
Support both ends of the shaft with V-blocks,
rotate the shaft once at any point, and measure the amplitude of the dial gauge.
Half of the measured amplitude is taken as the straightness.

■ Circularity M

Shaft with outer diameter g6/h5 (hardened)
DRoundness M
Exceedingbelow
3130.004
13200.005
20400.006
40500.007
Unit: mm
Shaft with outer diameter f8 (unhardened)
DRoundness M
Exceedingbelow
5100.011
10180.014
18300.017
30500.020
Unit: mm
 

■Straightness K

Shaft with outer diameter g6/h5 (hardened)
DLStraightness K
4No conditions(L/100)×0.05 or less
5No conditions(L/100)×0.03 or less
6 to 50L≦1000.01 or less
L＞100(L/100)×0.01 or less
Unit: mm
Shaft with outer diameter f8 (unhardened)
LStraightness K
L≦1000.025 or less
L＞100(L/100)×0.025 or less
Unit: mm
 

■ L dimension tolerance

Shaft with outer diameter g6/h5 (hardened)
LL dimension
tolerance
Exceedingbelow
twenty four30±0.2
30120±0.3
120400±0.5
4001000±0.8
10001500±1.2
Unit: mm
Shaft with outer diameter f8 (unhardened)
LL dimension
tolerance
Exceedingbelow
twenty four30±0.2
30120±0.3
120400±0.5
4001000±0.8
10001500±1.2
Unit: mm
 

■Coaxiality/squareness

Shaft, One-end male thread type Related image 1_Concentricity and squareness
 

Hardness and surface treatment precautions

■Decrease in hardness of processed parts

・The base material is processed after hardening, but the annealing process may result in a decrease in hardness.
*Hardness after reduction: Approximately 10 to 40 HRC

 

■ Hardness reduction range

・About 10 mm from the processed part

 

(example)

Shaft, One-end male thread type Related image 1_Hardness reduction range
 
 

■ Hardness reduction due to annealing

・Male thread ・Keyway ・Flat chamfer ・90 degree flat chamfer

 

■ Effective hardened layer depth

The effective hardened layer depth varies depending on the external dimensions and material.

Outer diameter DEffective case depth
Equivalent to SUJ2SUS440C/
13Cr stainless steel
40.5 or higher0.5 or higher
5
6 to 10
12th and 13th0.7 or higher
15 to 200.7 or higher
25 to 501.0 or higher
 

■About hard chrome plating and plating layers on processed parts

  • Hard chrome plating is done after the base material surface is treated, so there is no plating process on the processed area.
  • In the example below, only the "///" part is hard chrome plated.
 

Example) Remaining plating: Stepped male thread shaft with additional flat surface

/// part: remaining plating part

Shaft, One-end male thread type Related image 1_About the plating layer
 

The difference between a shaft and a rotating shaft

・Comparison of specifications between linear shafts and rotary shafts

 

■ Basic specifications

specificationshaftRotation axis
MaterialSUJ2 equivalent
SUS440C or 13Cr stainless steel		S45C equivalent
SUS304		S45C equivalent
SUS304		SCM435
QuenchingInduction hardening--Hardness 30~35HRC
Outer diameter toleranceg6/h5f8g6/h9/h7g6
Surface TreatmentNon-plated
hard chrome plating,
low-temperature black chrome plating
, electroless nickel plating (full-length surface treatment type)		hard chrome platingUnplated
Iron Oxide
Electroless Nickel Plating		Black oxide
electroless nickel plating

*Hard chrome plating does not leave a plating layer on the processed area. For more information, please click here .

 

■Additional work

Additional work nameshaftRotation axis
L dimension tolerance changeL<200⇒L±0.03
200≦L<500⇒L±0.05
L≧500⇒L±0.1		L<500⇒L±0.05
L≧500⇒L±0.1
Not applicable for L≧800
Spanner groove additionUp to two locations can be specifiedUp to one location can be specified
Flat chamferingUp to two locations can be specifiedUp to three locations can be specified
2-sided chamferingUp to two points can be specified
Angle specification: Fixed		Up to one location can be specified
Angle specification: Can be specified in 15 degree increments
V groove addition workUp to two locations can be specified-
KeywayUp to two locations can be specified
. Machining of multi-layered parts: Not allowed		Up to 4 locations can be specified
Machining of multi-layered parts: Possible
Male fine thread change2 types1 type
Change to fine female thread1 type-
Added undercut grooveM6 to M30M3 to M30
Change of female thread depthPossiblePossible
Retaining ring grooveTwo locations can be specified
(retaining ring type, not additional processing)		Two locations on D section and one location on each stepped section. Can be used in combination.
Slit cam groove-Up to one location can be specified
Coaxiality change-Possible
Left-handed male thread change-Possible
Adding a slotted groove-Up to one location can be specified
C chamfer width change-Possible

 

 

Basic Information

Basic Shape Solid End Shape (Left) Threaded End Shape (Right) No Machining
Shaft End Perpendicularity Perpendicularity (0.2)

Configure

Clear All

486 Part Numbers

View Part Numbers

Configure Remaining Specifications
Completed
loading

Specification/Dimensions

  • Material

    • Steel
      • SUJ2 Equivalent
      • S45C Equivalent
    • Stainless Steel
      • SUS304
      • SUS440C or 13Cr stainless

    Clear

  • Heat Treatment

    • Not Provided
    • Induction Hardened

    Clear

  • Surface Treatment

    • Not Provided
    • Hard Chrome Plating
    • Low Temperature Black Chrome Plating

    Clear

  • Shaft Dia. D(Ø)

    • 4
    • 5
    • 6
    • 8
    • 10
    • 12
    • 13
    • 15
    • 16
    • 18
    • 20
    • 25
    • 30
    • 35
    • 40
    • 50

    Clear

  • Length L(mm)

     [25-1498/1mm Unit(s)]

    Clear

  • Shaft Fit Tolerance

    • f8
    • g6
    • h5

    Clear

  • Hardness

    • Induction Hardened (56HRC~)
    • Induction Hardened (58HRC~)
    • No Induction Hardening

    Clear

  • B(mm)

    • 0

     [2-205/1mm Unit(s)]

    Clear

  • F(mm)

     [2-210/1mm Unit(s)]

    Clear

  • Fine Thread [PMC](mm)

    • 3
    • 4
    • 5
    • 6
    • 8
    • 10
    • 12
    • 15
    • 17
    • 20
    • 25
    • 30

    Clear

  • Fine Thread [PMS](mm)

    • 4
    • 5
    • 6
    • 8
    • 10
    • 12
    • 14
    • 18

    Clear

  • P(mm)

    • 3
    • 4
    • 5
    • 6
    • 8
    • 10
    • 12
    • 16
    • 20
    • 24
    • 30

    Clear

  • type

    • PSFAN
    • PSFGN
    • PSFUN
    • PSSFAN
    • PSSFGN
    • PSSFUN
    • RSFAN
    • SFAN
    • SFUN
    • SSFAN
    • SSFUN

    Clear

  • CAD

    • 2D
    • 3D

    Clear

Days to Ship

    • All
    • 3 Day(s) or Less
    • 6 Day(s) or Less
    • 7 Day(s) or Less
    • 11 Day(s) or Less

    Clear

Specify Alterations

Additional Products in this Category

Complementary Products

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel：(60) 3 7890 6399
9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday)
Technical Inquiry

Payment Method

more
  • Credit Card
    • VISA
    • MasterCard
  • Bank Transfer
    • FPX
    • Interbank GIRO (IBG)

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm,    9am – 1pm(Sat) * Order cut-off time is 12pm

  • Tel: (60) 3 7890 6399
Inquiry
Mobile View

Copyright © MISUMI Corporation All Rights Reserved.