[Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
[Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

High Torque Timing Pulleys - S14M (Part Numbers)

MISUMI

[Material]
· Pulley: S45C equivalent
· Flange: S45C equivalent
[Surface treatment]
· Black oxide

(i)Caution

Please note that the swaged flange options, NFC, RFC, and LFC, are not reflected in the CAD data.
Please check the content on our website as the PDF does not contain the most up-to-date information.

Part Number

Configured Part Number is shown.

■S14M

● Pulley Shape

Shape A

Shape B

Standard Tooth Profile

Tooth groove dimensions slightly vary
according to the number of teeth. (Pitch: 14.0mm)

■Belt Nominal Width / Dimensions

mm	Nominal
mm	S14M400	S14M600
A	46	67
W	53	74
L (Number of Teeth: 28 to 43)	73	94
L (Number of Teeth: 44 to 56)	78	99

[ ! ] Upon delivery, Flange is included without being swaged on.
[ ! ] Surface treatment may not be applied to the shaft bores.
[ ! ] No tapped holes or set screws.
[!] Specify Alteration TP when tapped hole is required. (Shaft Bore Specs. H, N, C, and G only)
[ ! ] Unless otherwise specified except for teeth and F dimensions, the dimension tolerance conforms to JIS B 0405 Class m.

● Shaft Bore Specification Select shaft bore spec mark and each dim. from the table below.　

H round hole

N New JIS Keyway + Tap
C Old JIS Keyway + Tap

G New JIS Keywayed Bore + Stepped Hole

F Stepped Hole
(Counterbored Hole on the Hub Side)

Y Both Ends Stepped Hole

[ ! ] Z - d ≥ 2
[ ! ]5.0 ≤ J ≤ W－5.0

[ ! ] Applicable to Shape B only
[ ! ] Z - d ≥ 2
[ ! ]5.0 ≤ J ≥ L－5.0

[ ! ] Applicable to Shape A only
[ ! ]Q (R)－Y ≥ 5
[ ! ]S+T ≤ W－5.0
[ ! ]S (T) ≥ 5.0

Type	Belt Width		[M]Material ^*		[S] Surface Treatment
	40 mm	60 mm	Pulley	Flange [ ! ]Accessory
	S14M400	S14M600
HTPTNF	●	●	S45C Equivalent	S45C Equivalent	—
HTPMNF	●	●			Black Oxide Coating

* The above material might be changed to the one equivalent to the original.

Specification Table

Part number

—

Pulley Shape

—

Shaft Bore Specs.: I.D.

—

(Shaft bore specs.: H, N, C)

HTPTNF32−S14M400

—

A
B

—

H40
G70

Z90

J90.0

(Shaft bore specs.: G, V, F)

HTPMNF48−S14M600

—

(Shaft hole specs: Y)

HTPTNF56−S14M400

—

Y80

—

Q120

—

R120

—

S20

—

T20

Part number			Pulley Shape	Pulley Shape				P.D.	O.D	D	F	E
Type	Number of Teeth	Type Nominal Width		A		B
				Shaft Bore Specs.
				H Round Hole V·Y Stepped Hole	N·C·G Keyway Tapped	H Round Hole V·F Stepped Hole	N·C·G Keyway Tapped
				d1 mm increments / Selectable
Steel HTPTNF HTPMNF	28	S14M400 S14M600	A B	30 to 70	30 to 70	30 to 60	30 to 60	124.78	121.98	90	136	101
	29			30 to 80		30 to 70	30 to 70	129.23	126.44	100	144	111
	30							133.69	130.90
	31			30 to 85		30 to 75		138.15	135.35	110	152	121
	32							142.60	139.81
	33			30 to 90		30 to 85		147.06	144.27	120	161	131
	34							151.52	148.72
	35			30 to 95				155.97	153.18		165	135
	36							160.43	157.63		172	141
	37							164.88	162.09
	38			35 to 105	35 to 70	35 to 95	35 to 70	169.34	166.55	135	180	150
	39							173.80	171.00		185	155
	40							178.25	175.46		190	161
	41			35 to 110		35 to 100		182.71	179.92	145	200	164
	42							187.17	184.37
	43			35 to 115				191.62	188.83	155	208	173
	44							196.08	193.28
	45			40 to 120	40 to 70	40 to 110	40 to 70	200.54	197.74	160	216	180
	46							204.99	202.20
	47							209.45	206.65		224	190
	48							213.90	211.11
	49			40 to 130				218.36	215.57		235	200
	50							222.82	220.02
	51							227.27	224.48
	52							231.73	228.94		250	210
	53							236.19	233.39
	54							240.64	237.85
	55							245.10	242.30		260	224
	56			40 to 150				249.55	246.76
[NG] Shaft bore dia. 31, 32, 46 to 49, 51 to 54, or 56 to 59 are not available for shaft bore specs. N, C or G. [ ! ] When Z ≤ d + key height for shaft bore specs. G, keyway is added to the Z dimension part.

Alterations

Part number

—

Pulley Shape

—

Shaft Bore Specs.: I.D.

—

(TP, etc.)

HTPMNF40−S14M400

—

H65

—

NFC

Alterations

Tapped Hole

Flange Cut

Hub Shortening

Code

Spec.

Adds a tapped hole.

d_H7 Shaft Bore I.D.	TP	A (Tapped Hole Angle)	Accessory Set Screws	Counterbore Dia.

30 to 45	M8	90° 120°	M8 × 6	9
	M10		M10 × 8	11
46 to 65	M10		M10 × 8	11
	M12		M12 × 10	14
66 to 150	M12		M12 × 10	14
	M16		M16 × 15	18

[ ! ] Applicable to Shaft Bore Specs. H, N, C and G only

[ ! ] Adds a tapped hole at tooth (A/2) for Shape A, at hub ((L-W)/2) for Shape B.

[ ! ] For Shape A, the tapped holes are set at around 90° or 120° to keep away from peaks.

[ ! ] Depth of tapped hole is M x 2, and the rest is counterbore.

[ ! ] Due to vibrations during transportation, the set screw may become detached from the main body.

Tapped Hole Angle Selection
90° 120°
Ordering Code
TP10－A90

Lowers the flange by cutting.
FC: 0.5 mm Increments
[ ! ]FC ≥ (O. D.) +2
[ ! ]FC ≤ F−2
Ordering Code FC185

Cuts the hub length in 0.5 mm increments.
[ ! ]3 ≤ BC < L－W

[ ! ] When combined with Alteration TP,
M + 3 ≤ BC < L - W

Ordering Code BC6.5
[NG] Not applicable to Shape A

Alterations	Side Tapped Hole	Side Through Hole
Code	QSC·QFC·QTC	KSC·KFC·KTC
Spec.	Machines tapped hole on the side surface of hub side. (QSC, QFC, QTC: 1 mm Increments) [ ! ] Minimum Thickness: 4 mm Shape A: d + M + 8 ≤ QSC (QFC, QTC) ≤ E− (M+8) Shape B: d + M + 8 ≤ QSC (QFC, QTC) ≤ D− (M+8) * d = Z when the Shaft Bore Specs. is G or V. (6 Locations) (4 Locations) (3 places) [ ! ] The pilot hole for tapping may go through. [ ! ] Side holes and tooth side tapped holes might interfere with each other. For details, see the relevant CAD data. [NG] When Shaft Bore Specs. is V, the pilot holes for tapping may break through the step part. [NG] Not applicable to Shaft Bore Specs. F or Y M Selection M5, M6, M8 Q□C Selection Specify the hole position (P. C. D. dim.). Ordering Code QTC120-M8	Machines through hole on the side surface. (KSC, KFC, KTC: 1 mm Increments) [ ! ] Minimum Thickness: 4 mm Shape A: d + K + 8 ≤ KSC (KFC, KTC) ≤ E− (K+8) Shape B: d + K + 8 ≤ KSC (KFC, KTC) ≤ D− (K+8) * d = Z when the Shaft Bore Specs. is G or V. (6 Locations) (4 Locations) (3 places) [ ! ] When Shaft Bore Specs. is V, through holes may break through the step part. [ ! ] Side holes and tooth side tapped holes might interfere with each other. For details, see the relevant CAD data. [NG] Not applicable to Shaft Bore Specs. F or Y K (Through Hole Dia.) Selection K12 to K17 (1 mm Increments) K□C selection Specify the hole position (P. C. D. dim.). Ordering Code KSC80－K12

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 60; 90

Part Number
HTPMNF36-S14M400-B-C[30,50,55]
HTPMNF36-S14M400-B-C[33-45/1]
HTPMNF36-S14M400-B-C[60-70/1]
HTPMNF36-S14M400-B-F[30-81/1]
HTPMNF36-S14M400-B-G[30,50,55]
HTPMNF36-S14M400-B-G[33-45/1]
HTPMNF36-S14M400-B-G[60-70/1]
HTPMNF36-S14M400-B-H[30-85/1]
HTPMNF36-S14M400-B-N[30,50,55]
HTPMNF36-S14M400-B-N[33-45/1]
HTPMNF36-S14M400-B-N[60-70/1]
HTPMNF36-S14M400-B-V[30-81/1]
HTPMNF36-S14M600-B-C[30,50,55]
HTPMNF36-S14M600-B-C[33-45/1]
HTPMNF36-S14M600-B-C[60-70/1]
HTPMNF36-S14M600-B-F[30-81/1]
HTPMNF36-S14M600-B-G[30,50,55]
HTPMNF36-S14M600-B-G[33-45/1]
HTPMNF36-S14M600-B-G[60-70/1]
HTPMNF36-S14M600-B-H[30-85/1]
HTPMNF36-S14M600-B-N[30,50,55]
HTPMNF36-S14M600-B-N[33-45/1]
HTPMNF36-S14M600-B-N[60-70/1]
HTPMNF36-S14M600-B-V[30-81/1]
HTPMNF40-S14M400-B-C[35-45/1]
HTPMNF40-S14M400-B-C[50,55]
HTPMNF40-S14M400-B-C[60-70/1]
HTPMNF40-S14M400-B-F[35-91/1]
HTPMNF40-S14M400-B-G[35-45/1]
HTPMNF40-S14M400-B-G[50,55]
HTPMNF40-S14M400-B-G[60-70/1]
HTPMNF40-S14M400-B-H[35-95/1]
HTPMNF40-S14M400-B-N[35-45/1]
HTPMNF40-S14M400-B-N[50,55]
HTPMNF40-S14M400-B-N[60-70/1]
HTPMNF40-S14M400-B-V[35-91/1]
HTPMNF40-S14M600-B-C[35-45/1]
HTPMNF40-S14M600-B-C[50,55]
HTPMNF40-S14M600-B-C[60-70/1]
HTPMNF40-S14M600-B-F[35-91/1]
HTPMNF40-S14M600-B-G[35-45/1]
HTPMNF40-S14M600-B-G[50,55]
HTPMNF40-S14M600-B-G[60-70/1]
HTPMNF40-S14M600-B-H[35-95/1]
HTPMNF40-S14M600-B-N[35-45/1]
HTPMNF40-S14M600-B-N[50,55]
HTPMNF40-S14M600-B-N[60-70/1]
HTPMNF40-S14M600-B-V[35-91/1]
HTPMNF42-S14M400-B-C[35-45/1]
HTPMNF42-S14M400-B-C[50,55]
HTPMNF42-S14M400-B-C[60-70/1]
HTPMNF42-S14M400-B-F[35-96/1]
HTPMNF42-S14M400-B-G[35-45/1]
HTPMNF42-S14M400-B-G[50,55]
HTPMNF42-S14M400-B-G[60-70/1]
HTPMNF42-S14M400-B-H[35-100/1]
HTPMNF42-S14M400-B-N[35-45/1]
HTPMNF42-S14M400-B-N[50,55]
HTPMNF42-S14M400-B-N[60-70/1]
HTPMNF42-S14M400-B-V[35-96/1]
HTPMNF42-S14M600-B-C[35-45/1]
HTPMNF42-S14M600-B-C[50,55]
HTPMNF42-S14M600-B-C[60-70/1]
HTPMNF42-S14M600-B-F[35-96/1]
HTPMNF42-S14M600-B-G[35-45/1]
HTPMNF42-S14M600-B-G[50,55]
HTPMNF42-S14M600-B-G[60-70/1]
HTPMNF42-S14M600-B-H[35-100/1]
HTPMNF42-S14M600-B-N[35-45/1]
HTPMNF42-S14M600-B-N[50,55]
HTPMNF42-S14M600-B-N[60-70/1]
HTPMNF42-S14M600-B-V[35-96/1]
HTPMNF44-S14M400-B-C[35-45/1]
HTPMNF44-S14M400-B-C[50,55]
HTPMNF44-S14M400-B-C[60-70/1]
HTPMNF44-S14M400-B-F[35-96/1]
HTPMNF44-S14M400-B-G[35-45/1]
HTPMNF44-S14M400-B-G[50,55]
HTPMNF44-S14M400-B-G[60-70/1]
HTPMNF44-S14M400-B-H[35-100/1]
HTPMNF44-S14M400-B-N[35-45/1]
HTPMNF44-S14M400-B-N[50,55]
HTPMNF44-S14M400-B-N[60-70/1]
HTPMNF44-S14M400-B-V[35-96/1]
HTPMNF44-S14M600-B-C[35-45/1]
HTPMNF44-S14M600-B-C[50,55]
HTPMNF44-S14M600-B-C[60-70/1]
HTPMNF44-S14M600-B-F[35-96/1]
HTPMNF44-S14M600-B-G[35-45/1]
HTPMNF44-S14M600-B-G[50,55]

Standard Unit Price	Minimum order quantity	Days to Ship	RoHS	Belt Width Used (mm)	No. of Teeth (T)	Pulley Shape	Surface Treatment	C (mm)	G (mm)	N (mm)	Shaft Bore Specifications (Both Ends Stepped Hole) [Y] (mm)	Shaft Bore Specifications (Round Hole) [H] (mm)	Shaft Bore Specifications (Stepped Hole) [V] (mm)	Shaft Bore Specifications (Stepped Hole: Counterbored Holes on the Hub Side) [F] (mm)
-	1 Piece(s)	14 Day(s) or more	10	40	36	Shape B	Black Oxide Coating	30 ～ 55	-	-	-	-	-	-
-	1 Piece(s)	14 Day(s) or more	10	40	36	Shape B	Black Oxide Coating	33 ～ 45	-	-	-	-	-	-
-	1 Piece(s)	14 Day(s) or more	10	40	36	Shape B	Black Oxide Coating	60 ～ 70	-	-	-	-	-	-
-	1 Piece(s)	14 Day(s) or more	10	40	36	Shape B	Black Oxide Coating	-	-	-	-	-	-	30 ～ 81
-	1 Piece(s)	14 Day(s) or more	10	40	36	Shape B	Black Oxide Coating	-	30 ～ 55	-	-	-	-	-
-	1 Piece(s)	14 Day(s) or more	10	40	36	Shape B	Black Oxide Coating	-	33 ～ 45	-	-	-	-	-
-	1 Piece(s)	14 Day(s) or more	10	40	36	Shape B	Black Oxide Coating	-	60 ～ 70	-	-	-	-	-
-	1 Piece(s)	14 Day(s) or more	10	40	36	Shape B	Black Oxide Coating	-	-	-	-	30 ～ 85	-	-
-	1 Piece(s)	14 Day(s) or more	10	40	36	Shape B	Black Oxide Coating	-	-	30 ～ 55	-	-	-	-
-	1 Piece(s)	14 Day(s) or more	10	40	36	Shape B	Black Oxide Coating	-	-	33 ～ 45	-	-	-	-
-	1 Piece(s)	14 Day(s) or more	10	40	36	Shape B	Black Oxide Coating	-	-	60 ～ 70	-	-	-	-
-	1 Piece(s)	14 Day(s) or more	10	40	36	Shape B	Black Oxide Coating	-	-	-	-	-	30 ～ 81	-
-	1 Piece(s)	14 Day(s) or more	10	60	36	Shape B	Black Oxide Coating	30 ～ 55	-	-	-	-	-	-
-	1 Piece(s)	14 Day(s) or more	10	60	36	Shape B	Black Oxide Coating	33 ～ 45	-	-	-	-	-	-
-	1 Piece(s)	14 Day(s) or more	10	60	36	Shape B	Black Oxide Coating	60 ～ 70	-	-	-	-	-	-
-	1 Piece(s)	14 Day(s) or more	10	60	36	Shape B	Black Oxide Coating	-	-	-	-	-	-	30 ～ 81
-	1 Piece(s)	14 Day(s) or more	10	60	36	Shape B	Black Oxide Coating	-	30 ～ 55	-	-	-	-	-
-	1 Piece(s)	14 Day(s) or more	10	60	36	Shape B	Black Oxide Coating	-	33 ～ 45	-	-	-	-	-
-	1 Piece(s)	14 Day(s) or more	10	60	36	Shape B	Black Oxide Coating	-	60 ～ 70	-	-	-	-	-
-	1 Piece(s)	14 Day(s) or more	10	60	36	Shape B	Black Oxide Coating	-	-	-	-	30 ～ 85	-	-
-	1 Piece(s)	14 Day(s) or more	10	60	36	Shape B	Black Oxide Coating	-	-	30 ～ 55	-	-	-	-
-	1 Piece(s)	14 Day(s) or more	10	60	36	Shape B	Black Oxide Coating	-	-	33 ～ 45	-	-	-	-
-	1 Piece(s)	14 Day(s) or more	10	60	36	Shape B	Black Oxide Coating	-	-	60 ～ 70	-	-	-	-
-	1 Piece(s)	14 Day(s) or more	10	60	36	Shape B	Black Oxide Coating	-	-	-	-	-	30 ～ 81	-
-	1 Piece(s)	14 Day(s) or more	10	40	40	Shape B	Black Oxide Coating	35 ～ 45	-	-	-	-	-	-
-	1 Piece(s)	14 Day(s) or more	10	40	40	Shape B	Black Oxide Coating	50 ～ 55	-	-	-	-	-	-
-	1 Piece(s)	14 Day(s) or more	10	40	40	Shape B	Black Oxide Coating	60 ～ 70	-	-	-	-	-	-
-	1 Piece(s)	14 Day(s) or more	10	40	40	Shape B	Black Oxide Coating	-	-	-	-	-	-	35 ～ 91
-	1 Piece(s)	14 Day(s) or more	10	40	40	Shape B	Black Oxide Coating	-	35 ～ 45	-	-	-	-	-
-	1 Piece(s)	14 Day(s) or more	10	40	40	Shape B	Black Oxide Coating	-	50 ～ 55	-	-	-	-	-
-	1 Piece(s)	14 Day(s) or more	10	40	40	Shape B	Black Oxide Coating	-	60 ～ 70	-	-	-	-	-
-	1 Piece(s)	14 Day(s) or more	10	40	40	Shape B	Black Oxide Coating	-	-	-	-	35 ～ 95	-	-
-	1 Piece(s)	14 Day(s) or more	10	40	40	Shape B	Black Oxide Coating	-	-	35 ～ 45	-	-	-	-
-	1 Piece(s)	14 Day(s) or more	10	40	40	Shape B	Black Oxide Coating	-	-	50 ～ 55	-	-	-	-
-	1 Piece(s)	14 Day(s) or more	10	40	40	Shape B	Black Oxide Coating	-	-	60 ～ 70	-	-	-	-
-	1 Piece(s)	14 Day(s) or more	10	40	40	Shape B	Black Oxide Coating	-	-	-	-	-	35 ～ 91	-
-	1 Piece(s)	14 Day(s) or more	10	60	40	Shape B	Black Oxide Coating	35 ～ 45	-	-	-	-	-	-
-	1 Piece(s)	14 Day(s) or more	10	60	40	Shape B	Black Oxide Coating	50 ～ 55	-	-	-	-	-	-
-	1 Piece(s)	14 Day(s) or more	10	60	40	Shape B	Black Oxide Coating	60 ～ 70	-	-	-	-	-	-
-	1 Piece(s)	14 Day(s) or more	10	60	40	Shape B	Black Oxide Coating	-	-	-	-	-	-	35 ～ 91
-	1 Piece(s)	14 Day(s) or more	10	60	40	Shape B	Black Oxide Coating	-	35 ～ 45	-	-	-	-	-
-	1 Piece(s)	14 Day(s) or more	10	60	40	Shape B	Black Oxide Coating	-	50 ～ 55	-	-	-	-	-
-	1 Piece(s)	14 Day(s) or more	10	60	40	Shape B	Black Oxide Coating	-	60 ～ 70	-	-	-	-	-
-	1 Piece(s)	14 Day(s) or more	10	60	40	Shape B	Black Oxide Coating	-	-	-	-	35 ～ 95	-	-
-	1 Piece(s)	14 Day(s) or more	10	60	40	Shape B	Black Oxide Coating	-	-	35 ～ 45	-	-	-	-
-	1 Piece(s)	14 Day(s) or more	10	60	40	Shape B	Black Oxide Coating	-	-	50 ～ 55	-	-	-	-
-	1 Piece(s)	14 Day(s) or more	10	60	40	Shape B	Black Oxide Coating	-	-	60 ～ 70	-	-	-	-
-	1 Piece(s)	14 Day(s) or more	10	60	40	Shape B	Black Oxide Coating	-	-	-	-	-	35 ～ 91	-
-	1 Piece(s)	14 Day(s) or more	10	40	42	Shape B	Black Oxide Coating	35 ～ 45	-	-	-	-	-	-
-	1 Piece(s)	14 Day(s) or more	10	40	42	Shape B	Black Oxide Coating	50 ～ 55	-	-	-	-	-	-
-	1 Piece(s)	14 Day(s) or more	10	40	42	Shape B	Black Oxide Coating	60 ～ 70	-	-	-	-	-	-
-	1 Piece(s)	14 Day(s) or more	10	40	42	Shape B	Black Oxide Coating	-	-	-	-	-	-	35 ～ 96
-	1 Piece(s)	14 Day(s) or more	10	40	42	Shape B	Black Oxide Coating	-	35 ～ 45	-	-	-	-	-
-	1 Piece(s)	14 Day(s) or more	10	40	42	Shape B	Black Oxide Coating	-	50 ～ 55	-	-	-	-	-
-	1 Piece(s)	14 Day(s) or more	10	40	42	Shape B	Black Oxide Coating	-	60 ～ 70	-	-	-	-	-
-	1 Piece(s)	14 Day(s) or more	10	40	42	Shape B	Black Oxide Coating	-	-	-	-	35 ～ 100	-	-
-	1 Piece(s)	14 Day(s) or more	10	40	42	Shape B	Black Oxide Coating	-	-	35 ～ 45	-	-	-	-
-	1 Piece(s)	14 Day(s) or more	10	40	42	Shape B	Black Oxide Coating	-	-	50 ～ 55	-	-	-	-
-	1 Piece(s)	14 Day(s) or more	10	40	42	Shape B	Black Oxide Coating	-	-	60 ～ 70	-	-	-	-
-	1 Piece(s)	14 Day(s) or more	10	40	42	Shape B	Black Oxide Coating	-	-	-	-	-	35 ～ 96	-
-	1 Piece(s)	14 Day(s) or more	10	60	42	Shape B	Black Oxide Coating	35 ～ 45	-	-	-	-	-	-
-	1 Piece(s)	14 Day(s) or more	10	60	42	Shape B	Black Oxide Coating	50 ～ 55	-	-	-	-	-	-
-	1 Piece(s)	14 Day(s) or more	10	60	42	Shape B	Black Oxide Coating	60 ～ 70	-	-	-	-	-	-
-	1 Piece(s)	14 Day(s) or more	10	60	42	Shape B	Black Oxide Coating	-	-	-	-	-	-	35 ～ 96
-	1 Piece(s)	14 Day(s) or more	10	60	42	Shape B	Black Oxide Coating	-	35 ～ 45	-	-	-	-	-
-	1 Piece(s)	14 Day(s) or more	10	60	42	Shape B	Black Oxide Coating	-	50 ～ 55	-	-	-	-	-
-	1 Piece(s)	14 Day(s) or more	10	60	42	Shape B	Black Oxide Coating	-	60 ～ 70	-	-	-	-	-
-	1 Piece(s)	14 Day(s) or more	10	60	42	Shape B	Black Oxide Coating	-	-	-	-	35 ～ 100	-	-
-	1 Piece(s)	14 Day(s) or more	10	60	42	Shape B	Black Oxide Coating	-	-	35 ～ 45	-	-	-	-
-	1 Piece(s)	14 Day(s) or more	10	60	42	Shape B	Black Oxide Coating	-	-	50 ～ 55	-	-	-	-
-	1 Piece(s)	14 Day(s) or more	10	60	42	Shape B	Black Oxide Coating	-	-	60 ～ 70	-	-	-	-
-	1 Piece(s)	14 Day(s) or more	10	60	42	Shape B	Black Oxide Coating	-	-	-	-	-	35 ～ 96	-
-	1 Piece(s)	14 Day(s) or more	10	40	44	Shape B	Black Oxide Coating	35 ～ 45	-	-	-	-	-	-
-	1 Piece(s)	14 Day(s) or more	10	40	44	Shape B	Black Oxide Coating	50 ～ 55	-	-	-	-	-	-
-	1 Piece(s)	14 Day(s) or more	10	40	44	Shape B	Black Oxide Coating	60 ～ 70	-	-	-	-	-	-
-	1 Piece(s)	14 Day(s) or more	10	40	44	Shape B	Black Oxide Coating	-	-	-	-	-	-	35 ～ 96
-	1 Piece(s)	14 Day(s) or more	10	40	44	Shape B	Black Oxide Coating	-	35 ～ 45	-	-	-	-	-
-	1 Piece(s)	14 Day(s) or more	10	40	44	Shape B	Black Oxide Coating	-	50 ～ 55	-	-	-	-	-
-	1 Piece(s)	14 Day(s) or more	10	40	44	Shape B	Black Oxide Coating	-	60 ～ 70	-	-	-	-	-
-	1 Piece(s)	14 Day(s) or more	10	40	44	Shape B	Black Oxide Coating	-	-	-	-	35 ～ 100	-	-
-	1 Piece(s)	14 Day(s) or more	10	40	44	Shape B	Black Oxide Coating	-	-	35 ～ 45	-	-	-	-
-	1 Piece(s)	14 Day(s) or more	10	40	44	Shape B	Black Oxide Coating	-	-	50 ～ 55	-	-	-	-
-	1 Piece(s)	14 Day(s) or more	10	40	44	Shape B	Black Oxide Coating	-	-	60 ～ 70	-	-	-	-
-	1 Piece(s)	14 Day(s) or more	10	40	44	Shape B	Black Oxide Coating	-	-	-	-	-	35 ～ 96	-
-	1 Piece(s)	14 Day(s) or more	10	60	44	Shape B	Black Oxide Coating	35 ～ 45	-	-	-	-	-	-
-	1 Piece(s)	14 Day(s) or more	10	60	44	Shape B	Black Oxide Coating	50 ～ 55	-	-	-	-	-	-
-	1 Piece(s)	14 Day(s) or more	10	60	44	Shape B	Black Oxide Coating	60 ～ 70	-	-	-	-	-	-
-	1 Piece(s)	14 Day(s) or more	10	60	44	Shape B	Black Oxide Coating	-	-	-	-	-	-	35 ～ 96
-	1 Piece(s)	14 Day(s) or more	10	60	44	Shape B	Black Oxide Coating	-	35 ～ 45	-	-	-	-	-
-	1 Piece(s)	14 Day(s) or more	10	60	44	Shape B	Black Oxide Coating	-	50 ～ 55	-	-	-	-	-

Product TOP

Basic Information

Type	Timing Pulleys	Belt Type	S14M	Material	S45C Equivalent
Timing Pulley / Idler	Pulleys

Configure

516 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Belt Width Used(mm)
40

60
Clear
No. of Teeth(T)
28

30

32

34

36

40

42

44

48

50

56
Clear
Surface Treatment
- Not Provided
- Black Oxide Coating
Clear
C(mm)
30

50

55

60
[33-45/1mm Unit(s)][60-70/1mm Unit(s)]
Clear
G(mm)
30

50

55

60
[33-45/1mm Unit(s)][60-70/1mm Unit(s)]
Clear
N(mm)
30

50

55

60
[33-45/1mm Unit(s)][60-70/1mm Unit(s)]
Clear
Shaft Bore Specifications (Both Ends Stepped Hole) [Y](mm)
Clear
Shaft Bore Specifications (Round Hole) [H](mm)
[30-110/1mm Unit(s)]
Clear
Shaft Bore Specifications (Stepped Hole) [V](mm)
[30-106/1mm Unit(s)]
Clear
Shaft Bore Specifications (Stepped Hole: Counterbored Holes on the Hub Side) [F](mm)
[30-106/1mm Unit(s)]
Clear
type
- HTPMNF□□-S14M
- HTPTNF□□-S14M
Clear
Pulley Shape
- Shape A
- Shape B
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

14 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

High Torque Timing Belts/S14M
MISUMI

Standard Price : MYR 658.28-

Days to Ship : 3 Day(s)
High Torque Timing Pulleys P8M Type
MISUMI

Days to Ship : 7 Day(s) or more
High Torque Timing Pulleys P5M Type
MISUMI

Days to Ship : 6 Day(s) or more
High Torque Timing Pulleys - 5GT Type
MISUMI

Days to Ship : 5 Day(s) or more
High Torque Timing Pulleys - 8YU
MISUMI

Days to Ship : 9 Day(s)
Non-backlash Pulleys S8M Type
MISUMI

Days to Ship : 7 Day(s) or more
Timing Pulley S14M Type
MITSUBOSHI_BELT

Standard Price : MYR 563.41-

Days to Ship : 4 Day(s) or more
High Torque Timing Pulleys P2M/P3M Type
MISUMI

Days to Ship : 6 Day(s) or more
Timing Pulleys - T2.5
MISUMI

Days to Ship : 6 Day(s) or more
Standard Belt S14M
MITSUBOSHI_BELT

Standard Price : MYR 638.77-

Days to Ship : 8 Day(s) or more
Timing Pulley S8M Type
MITSUBOSHI_BELT

Standard Price : MYR 174.31-

Days to Ship : 4 Day(s) or more
K Super Torque Timing Pulley - S8M
KATAYAMA CHAIN

Standard Price : MYR 112.99-

Days to Ship : 8 Day(s) or more

back next

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations): Tel：(60) 3 7890 6399; 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday); Technical Inquiry

How can we improve?

High Torque Timing Pulleys - S14M (Part Numbers)

(i)Caution

Specification Table

Alterations

Part Number

Basic Information

Configure

Specification/Dimensions

Belt Width Used(mm)

No. of Teeth(T)

Surface Treatment

C(mm)

G(mm)

N(mm)

Shaft Bore Specifications (Both Ends Stepped Hole) [Y](mm)

Shaft Bore Specifications (Round Hole) [H](mm)

Shaft Bore Specifications (Stepped Hole) [V](mm)

Shaft Bore Specifications (Stepped Hole: Counterbored Holes on the Hub Side) [F](mm)

type

Pulley Shape

CAD

Days to Ship

Specify Alterations

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm