(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Webcode Seach | Series
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

Loading

  • [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
  • [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

  • How can we improve?

    How can we improve?

    Comments
    Name (Optional)
    E-mail Address (Optional)
    Tel (Optional)

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Customer Privacy Policy

    Thank you for your cooperation.

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Please use the inquiry form.

    Customer Privacy Policy

High Torque Timing Pulleys - S14M (Part Numbers)

High Torque Timing Pulleys - S14M

MISUMI

MISUMI

[Material]
· Pulley: S45C equivalent
· Flange: S45C equivalent
[Surface treatment]
· Black oxide

(i)Caution

  • Please note that the swaged flange options, NFC, RFC, and LFC, are not reflected in the CAD data.
  • Please check the content on our website as the PDF does not contain the most up-to-date information.

PDFP.1-1405-2014

Part Number

Configured Part Number is shown.

■S14M
● Pulley Shape
Shape A
Shape B
Standard Tooth Profile
Tooth groove dimensions slightly vary
according to the number of teeth. (Pitch: 14.0mm)
■Belt Nominal Width / Dimensions
mmNominal
S14M400S14M600
A4667
W5374
L (Number of Teeth: 28 to 43)7394
L (Number of Teeth: 44 to 56)7899
[ ! ] Upon delivery, Flange is included without being swaged on.
[ ! ] Surface treatment may not be applied to the shaft bores.
[ ! ] No tapped holes or set screws.
[!] Specify Alteration TP when tapped hole is required. (Shaft Bore Specs. H, N, C, and G only)
[ ! ] Unless otherwise specified except for teeth and F dimensions, the dimension tolerance conforms to JIS B 0405 Class m.
● Shaft Bore Specification Select shaft bore spec mark and each dim. from the table below.　
H round hole
N New JIS Keyway + Tap
C Old JIS Keyway + Tap
G New JIS Keywayed Bore + Stepped Hole
F Stepped Hole
(Counterbored Hole on the Hub Side)
Y Both Ends Stepped Hole
 
[ ! ] Z - d ≥ 2
[ ! ]5.0 ≤ J ≤ W－5.0
[ ! ] Applicable to Shape B only
[ ! ] Z - d ≥ 2
[ ! ]5.0 ≤ J ≥ L－5.0
[ ! ] Applicable to Shape A only
[ ! ]Q (R)－Y ≥ 5
[ ! ]S+T ≤ W－5.0
[ ! ]S (T) ≥ 5.0
 
TypeBelt Width[M]Material *[S] Surface Treatment
40 mm60 mmPulleyFlange
[ ! ]Accessory
S14M400S14M600
HTPTNF●●S45C EquivalentS45C Equivalent—
HTPMNF●●Black Oxide Coating
* The above material might be changed to the one equivalent to the original.

Specification Table

 Part number—Pulley Shape—Shaft Bore Specs.: I.D.—Z—J—Q—R—S—T
(Shaft bore specs.: H, N, C)HTPTNF32−S14M400—A
B		—H40
G70		 
Z90		 
J90.0		        
(Shaft bore specs.: G, V, F)HTPMNF48−S14M600————        
(Shaft hole specs: Y)HTPTNF56−S14M400—A—Y80    —Q120—R120—S20—T20
Part numberPulley
Shape		Pulley ShapeP.D.O.DDFE
TypeNumber of TeethType
Nominal Width		AB
Shaft Bore Specs.
H
Round Hole
V·Y
Stepped Hole		N·C·G
Keyway
Tapped		H
Round Hole
V·F
Stepped Hole		N·C·G
Keyway
Tapped
d1 mm increments / Selectable
Steel
HTPTNF

HTPMNF		28S14M400

S14M600		A

B		30 to 7030 to 7030 to 6030 to 60124.78121.9890136101
2930 to 8030 to 7030 to 70129.23126.44100144111
30133.69130.90
3130 to 8530 to 75138.15135.35110152121
32142.60139.81
3330 to 9030 to 85147.06144.27120161131
34151.52148.72
3530 to 95155.97153.18165135
36160.43157.63172141
37164.88162.09
3835 to 10535 to 7035 to 9535 to 70169.34166.55135180150
39173.80171.00185155
40178.25175.46190161
4135 to 11035 to 100182.71179.92145200164
42187.17184.37
4335 to 115191.62188.83155208173
44196.08193.28
4540 to 12040 to 7040 to 11040 to 70200.54197.74160216180
46204.99202.20
47209.45206.65224190
48213.90211.11
4940 to 130218.36215.57235200
50222.82220.02
51227.27224.48
52231.73228.94250210
53236.19233.39
54240.64237.85
55245.10242.30260224
5640 to 150249.55246.76
[NG] Shaft bore dia. 31, 32, 46 to 49, 51 to 54, or 56 to 59 are not available for shaft bore specs. N, C or G.
[ ! ] When Z ≤ d + key height for shaft bore specs. G, keyway is added to the Z dimension part.

Alterations

Part number—Pulley Shape—Shaft Bore Specs.: I.D.—Z—J—Q—R—S—T—(TP, etc.)
HTPMNF40−S14M400—A—H65            —NFC     
 
AlterationsTapped HoleFlange CutHub Shortening
CodeTPFCBC
Spec.

Adds a tapped hole.

dH7
Shaft Bore I.D.		TPA
(Tapped Hole Angle)		Accessory
Set Screws		Counterbore Dia.
30 to 45M890°

120°		M8 × 69
M10M10 × 811
46 to 65M10M10 × 811
M12M12 × 1014
66 to 150M12M12 × 1014
M16M16 × 1518
 
[ ! ] Applicable to Shaft Bore Specs. H, N, C and G only

[ ! ] Adds a tapped hole at tooth (A/2) for Shape A, at hub ((L-W)/2) for Shape B.

[ ! ] For Shape A, the tapped holes are set at around 90° or 120° to keep away from peaks.

[ ! ] Depth of tapped hole is M x 2, and the rest is counterbore.

[ ! ] Due to vibrations during transportation, the set screw may become detached from the main body.

Tapped Hole Angle Selection
90° 120°
Ordering Code
TP10－A90
Lowers the flange by cutting.
FC: 0.5 mm Increments
[ ! ]FC ≥ (O. D.) +2
[ ! ]FC ≤ F−2
Ordering Code FC185
Cuts the hub length in 0.5 mm increments.
[ ! ]3 ≤ BC < L－W

[ ! ] When combined with Alteration TP,
M + 3 ≤ BC < L - W

Ordering Code BC6.5
[NG] Not applicable to Shape A
 
AlterationsSide Tapped HoleSide Through Hole
CodeQSC·QFC·QTCKSC·KFC·KTC
Spec.

Machines tapped hole on the side surface of hub side. (QSC, QFC, QTC: 1 mm Increments)

[ ! ] Minimum Thickness: 4 mm
  Shape A: d + M + 8 ≤ QSC (QFC, QTC) ≤ E− (M+8)
  Shape B: d + M + 8 ≤ QSC (QFC, QTC) ≤ D− (M+8)
* d = Z when the Shaft Bore Specs. is G or V.
(6 Locations) (4 Locations) (3 places)

[ ! ] The pilot hole for tapping may go through.

[ ! ] Side holes and tooth side tapped holes might interfere with each other.

For details, see the relevant CAD data.

[NG] When Shaft Bore Specs. is V,
the pilot holes for tapping may break through the step part.

[NG] Not applicable to Shaft Bore Specs. F or Y

M Selection M5, M6, M8

Q□C Selection Specify the hole position (P. C. D. dim.).

Ordering Code QTC120-M8
Machines through hole on the side surface. (KSC, KFC, KTC: 1 mm Increments)
[ ! ] Minimum Thickness: 4 mm
  Shape A: d + K + 8 ≤ KSC (KFC, KTC) ≤ E− (K+8)
  Shape B: d + K + 8 ≤ KSC (KFC, KTC) ≤ D− (K+8)
* d = Z when the Shaft Bore Specs. is G or V.
(6 Locations) (4 Locations) (3 places)

[ ! ] When Shaft Bore Specs. is V,
through holes may break through the step part.

[ ! ] Side holes and tooth side tapped holes might interfere with each other.

For details, see the relevant CAD data.

[NG] Not applicable to Shaft Bore Specs. F or Y

K (Through Hole Dia.) Selection
K12 to K17 (1 mm Increments)
K□C selection
Specify the hole position (P. C. D. dim.).

Ordering Code
KSC80－K12

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...

CAD Download

30
60
90
  1. << Prev
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
Part Number
HTPTNF44-S14M600-A-N[50,​55]
HTPTNF44-S14M600-A-N[60-70/1]
HTPTNF44-S14M600-A-V[35-111/1]
HTPTNF44-S14M600-A-Y[35-111/1]
HTPTNF48-S14M400-A-C[40-45/1]
HTPTNF48-S14M400-A-C[50,​55]
HTPTNF48-S14M400-A-C[60-70/1]
HTPTNF48-S14M400-A-G[40-45/1]
HTPTNF48-S14M400-A-G[50,​55]
HTPTNF48-S14M400-A-G[60-70/1]
HTPTNF48-S14M400-A-H[40-120/1]
HTPTNF48-S14M400-A-N[40-45/1]
HTPTNF48-S14M400-A-N[50,​55]
HTPTNF48-S14M400-A-N[60-70/1]
HTPTNF48-S14M400-A-V[40-116/1]
HTPTNF48-S14M400-A-Y[40-116/1]
HTPTNF48-S14M600-A-C[40-45/1]
HTPTNF48-S14M600-A-C[50,​55]
HTPTNF48-S14M600-A-C[60-70/1]
HTPTNF48-S14M600-A-G[40-45/1]
HTPTNF48-S14M600-A-G[50,​55]
HTPTNF48-S14M600-A-G[60-70/1]
HTPTNF48-S14M600-A-H[40-120/1]
HTPTNF48-S14M600-A-N[40-45/1]
HTPTNF48-S14M600-A-N[50,​55]
HTPTNF48-S14M600-A-N[60-70/1]
HTPTNF48-S14M600-A-V[40-116/1]
HTPTNF48-S14M600-A-Y[40-116/1]
HTPTNF50-S14M400-A-C[40-45/1]
HTPTNF50-S14M400-A-C[50,​55]
HTPTNF50-S14M400-A-C[60-70/1]
HTPTNF50-S14M400-A-G[40-45/1]
HTPTNF50-S14M400-A-G[50,​55]
HTPTNF50-S14M400-A-G[60-70/1]
HTPTNF50-S14M400-A-H[40-130/1]
HTPTNF50-S14M400-A-N[40-45/1]
HTPTNF50-S14M400-A-N[50,​55]
HTPTNF50-S14M400-A-N[60-70/1]
HTPTNF50-S14M400-A-V[40-126/1]
HTPTNF50-S14M400-A-Y[40-126/1]
HTPTNF50-S14M600-A-C[40-45/1]
HTPTNF50-S14M600-A-C[50,​55]
HTPTNF50-S14M600-A-C[60-70/1]
HTPTNF50-S14M600-A-G[40-45/1]
HTPTNF50-S14M600-A-G[50,​55]
HTPTNF50-S14M600-A-G[60-70/1]
HTPTNF50-S14M600-A-H[40-130/1]
HTPTNF50-S14M600-A-N[40-45/1]
HTPTNF50-S14M600-A-N[50,​55]
HTPTNF50-S14M600-A-N[60-70/1]
HTPTNF50-S14M600-A-V[40-126/1]
HTPTNF50-S14M600-A-Y[40-126/1]
HTPTNF56-S14M400-A-C[40-45/1]
HTPTNF56-S14M400-A-C[50,​55]
HTPTNF56-S14M400-A-C[60-70/1]
HTPTNF56-S14M400-A-G[40-45/1]
HTPTNF56-S14M400-A-G[50,​55]
HTPTNF56-S14M400-A-G[60-70/1]
HTPTNF56-S14M400-A-H[40-150/1]
HTPTNF56-S14M400-A-N[40-45/1]
HTPTNF56-S14M400-A-N[50,​55]
HTPTNF56-S14M400-A-N[60-70/1]
HTPTNF56-S14M400-A-V[40-146/1]
HTPTNF56-S14M400-A-Y[40-146/1]
HTPTNF56-S14M600-A-C[40-45/1]
HTPTNF56-S14M600-A-C[50,​55]
HTPTNF56-S14M600-A-C[60-70/1]
HTPTNF56-S14M600-A-G[40-45/1]
HTPTNF56-S14M600-A-G[50,​55]
HTPTNF56-S14M600-A-G[60-70/1]
HTPTNF56-S14M600-A-H[40-150/1]
HTPTNF56-S14M600-A-N[40-45/1]
HTPTNF56-S14M600-A-N[50,​55]
HTPTNF56-S14M600-A-N[60-70/1]
HTPTNF56-S14M600-A-V[40-146/1]
HTPTNF56-S14M600-A-Y[40-146/1]
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipRoHSBelt Width Used
(mm) 		No. of Teeth
(T) 		Pulley Shape Surface Treatment C
(mm) 		G
(mm) 		N
(mm) 		Shaft Bore Specifications (Both Ends Stepped Hole) [Y]
(mm) 		Shaft Bore Specifications (Round Hole) [H]
(mm) 		Shaft Bore Specifications (Stepped Hole) [V]
(mm) 		Shaft Bore Specifications (Stepped Hole: Counterbored Holes on the Hub Side) [F]
(mm)

-

1 Piece(s) 14 Day(s) or more 106044Shape ANot Provided--50 ～ 55----

-

1 Piece(s) 14 Day(s) or more 106044Shape ANot Provided--60 ～ 70----

-

1 Piece(s) 14 Day(s) or more 106044Shape ANot Provided-----35 ～ 111-

-

1 Piece(s) 14 Day(s) or more 106044Shape ANot Provided---35 ～ 111---

-

1 Piece(s) 14 Day(s) or more 104048Shape ANot Provided40 ～ 45------

-

1 Piece(s) 14 Day(s) or more 104048Shape ANot Provided50 ～ 55------

-

1 Piece(s) 14 Day(s) or more 104048Shape ANot Provided60 ～ 70------

-

1 Piece(s) 14 Day(s) or more 104048Shape ANot Provided-40 ～ 45-----

-

1 Piece(s) 14 Day(s) or more 104048Shape ANot Provided-50 ～ 55-----

-

1 Piece(s) 14 Day(s) or more 104048Shape ANot Provided-60 ～ 70-----

-

1 Piece(s) 14 Day(s) or more 104048Shape ANot Provided----40 ～ 120--

-

1 Piece(s) 14 Day(s) or more 104048Shape ANot Provided--40 ～ 45----

-

1 Piece(s) 14 Day(s) or more 104048Shape ANot Provided--50 ～ 55----

-

1 Piece(s) 14 Day(s) or more 104048Shape ANot Provided--60 ～ 70----

-

1 Piece(s) 14 Day(s) or more 104048Shape ANot Provided-----40 ～ 116-

-

1 Piece(s) 14 Day(s) or more 104048Shape ANot Provided---40 ～ 116---

-

1 Piece(s) 14 Day(s) or more 106048Shape ANot Provided40 ～ 45------

-

1 Piece(s) 14 Day(s) or more 106048Shape ANot Provided50 ～ 55------

-

1 Piece(s) 14 Day(s) or more 106048Shape ANot Provided60 ～ 70------

-

1 Piece(s) 14 Day(s) or more 106048Shape ANot Provided-40 ～ 45-----

-

1 Piece(s) 14 Day(s) or more 106048Shape ANot Provided-50 ～ 55-----

-

1 Piece(s) 14 Day(s) or more 106048Shape ANot Provided-60 ～ 70-----

-

1 Piece(s) 14 Day(s) or more 106048Shape ANot Provided----40 ～ 120--

-

1 Piece(s) 14 Day(s) or more 106048Shape ANot Provided--40 ～ 45----

-

1 Piece(s) 14 Day(s) or more 106048Shape ANot Provided--50 ～ 55----

-

1 Piece(s) 14 Day(s) or more 106048Shape ANot Provided--60 ～ 70----

-

1 Piece(s) 14 Day(s) or more 106048Shape ANot Provided-----40 ～ 116-

-

1 Piece(s) 14 Day(s) or more 106048Shape ANot Provided---40 ～ 116---

-

1 Piece(s) 14 Day(s) or more 104050Shape ANot Provided40 ～ 45------

-

1 Piece(s) 14 Day(s) or more 104050Shape ANot Provided50 ～ 55------

-

1 Piece(s) 14 Day(s) or more 104050Shape ANot Provided60 ～ 70------

-

1 Piece(s) 14 Day(s) or more 104050Shape ANot Provided-40 ～ 45-----

-

1 Piece(s) 14 Day(s) or more 104050Shape ANot Provided-50 ～ 55-----

-

1 Piece(s) 14 Day(s) or more 104050Shape ANot Provided-60 ～ 70-----

-

1 Piece(s) 14 Day(s) or more 104050Shape ANot Provided----40 ～ 130--

-

1 Piece(s) 14 Day(s) or more 104050Shape ANot Provided--40 ～ 45----

-

1 Piece(s) 14 Day(s) or more 104050Shape ANot Provided--50 ～ 55----

-

1 Piece(s) 14 Day(s) or more 104050Shape ANot Provided--60 ～ 70----

-

1 Piece(s) 14 Day(s) or more 104050Shape ANot Provided-----40 ～ 126-

-

1 Piece(s) 14 Day(s) or more 104050Shape ANot Provided---40 ～ 126---

-

1 Piece(s) 14 Day(s) or more 106050Shape ANot Provided40 ～ 45------

-

1 Piece(s) 14 Day(s) or more 106050Shape ANot Provided50 ～ 55------

-

1 Piece(s) 14 Day(s) or more 106050Shape ANot Provided60 ～ 70------

-

1 Piece(s) 14 Day(s) or more 106050Shape ANot Provided-40 ～ 45-----

-

1 Piece(s) 14 Day(s) or more 106050Shape ANot Provided-50 ～ 55-----

-

1 Piece(s) 14 Day(s) or more 106050Shape ANot Provided-60 ～ 70-----

-

1 Piece(s) 14 Day(s) or more 106050Shape ANot Provided----40 ～ 130--

-

1 Piece(s) 14 Day(s) or more 106050Shape ANot Provided--40 ～ 45----

-

1 Piece(s) 14 Day(s) or more 106050Shape ANot Provided--50 ～ 55----

-

1 Piece(s) 14 Day(s) or more 106050Shape ANot Provided--60 ～ 70----

-

1 Piece(s) 14 Day(s) or more 106050Shape ANot Provided-----40 ～ 126-

-

1 Piece(s) 14 Day(s) or more 106050Shape ANot Provided---40 ～ 126---

-

1 Piece(s) 14 Day(s) or more 104056Shape ANot Provided40 ～ 45------

-

1 Piece(s) 14 Day(s) or more 104056Shape ANot Provided50 ～ 55------

-

1 Piece(s) 14 Day(s) or more 104056Shape ANot Provided60 ～ 70------

-

1 Piece(s) 14 Day(s) or more 104056Shape ANot Provided-40 ～ 45-----

-

1 Piece(s) 14 Day(s) or more 104056Shape ANot Provided-50 ～ 55-----

-

1 Piece(s) 14 Day(s) or more 104056Shape ANot Provided-60 ～ 70-----

-

1 Piece(s) 14 Day(s) or more 104056Shape ANot Provided----40 ～ 150--

-

1 Piece(s) 14 Day(s) or more 104056Shape ANot Provided--40 ～ 45----

-

1 Piece(s) 14 Day(s) or more 104056Shape ANot Provided--50 ～ 55----

-

1 Piece(s) 14 Day(s) or more 104056Shape ANot Provided--60 ～ 70----

-

1 Piece(s) 14 Day(s) or more 104056Shape ANot Provided-----40 ～ 146-

-

1 Piece(s) 14 Day(s) or more 104056Shape ANot Provided---40 ～ 146---

-

1 Piece(s) 14 Day(s) or more 106056Shape ANot Provided40 ～ 45------

-

1 Piece(s) 14 Day(s) or more 106056Shape ANot Provided50 ～ 55------

-

1 Piece(s) 14 Day(s) or more 106056Shape ANot Provided60 ～ 70------

-

1 Piece(s) 14 Day(s) or more 106056Shape ANot Provided-40 ～ 45-----

-

1 Piece(s) 14 Day(s) or more 106056Shape ANot Provided-50 ～ 55-----

-

1 Piece(s) 14 Day(s) or more 106056Shape ANot Provided-60 ～ 70-----

-

1 Piece(s) 14 Day(s) or more 106056Shape ANot Provided----40 ～ 150--

-

1 Piece(s) 14 Day(s) or more 106056Shape ANot Provided--40 ～ 45----

-

1 Piece(s) 14 Day(s) or more 106056Shape ANot Provided--50 ～ 55----

-

1 Piece(s) 14 Day(s) or more 106056Shape ANot Provided--60 ～ 70----

-

1 Piece(s) 14 Day(s) or more 106056Shape ANot Provided-----40 ～ 146-

-

1 Piece(s) 14 Day(s) or more 106056Shape ANot Provided---40 ～ 146---

Loading...

  1. << Prev
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
 

Basic Information

Type Timing Pulleys Belt Type S14M Material S45C Equivalent
Timing Pulley / Idler Pulleys

Configure

Clear All

526 Part Numbers

View Part Numbers

Configure Remaining Specifications
Completed
loading

Specification/Dimensions

  • Belt Width Used(mm)

    • 40
    • 60

    Clear

  • No. of Teeth(T)

    • 28
    • 30
    • 32
    • 34
    • 36
    • 40
    • 42
    • 44
    • 48
    • 50
    • 56

    Clear

  • Surface Treatment

    • Not Provided
    • Black Oxide Coating

    Clear

  • C(mm)

    • 30
    • 50
    • 55
    • 60

     [33-45/1mm Unit(s)][60-70/1mm Unit(s)]

    Clear

  • G(mm)

    • 30
    • 50
    • 55
    • 60

     [33-45/1mm Unit(s)][60-70/1mm Unit(s)]

    Clear

  • N(mm)

    • 30
    • 50
    • 55
    • 60

     [31-45/1mm Unit(s)][60-70/1mm Unit(s)]

    Clear

  • Shaft Bore Specifications (Both Ends Stepped Hole) [Y](mm)

     [30-146/1mm Unit(s)]

    Clear

  • Shaft Bore Specifications (Round Hole) [H](mm)

     [30-150/1mm Unit(s)]

    Clear

  • Shaft Bore Specifications (Stepped Hole) [V](mm)

     [30-146/1mm Unit(s)]

    Clear

  • Shaft Bore Specifications (Stepped Hole: Counterbored Holes on the Hub Side) [F](mm)

     

    Clear

  • type

    • HTPMNF□□-S14M
    • HTPTNF□□-S14M

    Clear

  • Pulley Shape

    • Shape A
    • Shape B

    Clear

  • CAD

    • 2D
    • 3D

    Clear

Days to Ship

    • All
    • 14 Day(s) or Less

    Clear

Specify Alterations

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel：(60) 3 7890 6399
9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday)
Technical Inquiry

Payment Method

more
  • Credit Card
    • VISA
    • MasterCard
  • Bank Transfer
    • FPX
    • Interbank GIRO (IBG)

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm,    9am – 1pm(Sat) * Order cut-off time is 12pm

  • Tel: (60) 3 7890 6399
Inquiry
Mobile View

Copyright © MISUMI Corporation All Rights Reserved.