[Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Flat Belt Conveyors - Head Drive, 2-Groove Frame (Pulley Dia.30mm)

MISUMI

Panasonic and Oriental Motor cannot be selected as of now for motor selection due to unstable supply.

(i)Caution

Items with L Length longer than 2,000mm will be treated as special delivery from 01/11/02019,
and additional cost RM2,772.70 will be added in each product for the delivery fee. For items L Length shorter than 2,000mm will not have any price increase
[Discontinuation Information] The "HY (Yellow Green)" belt specification has been discontinued on March 3, 2025. There is no successor product, so please select another belt type.

Part Number

Configured Part Number is shown.

Drawing/Specifications
3D Preview
Part Numbers
More Information
Catalog

Dimensions

Frame cross section/enlarged (symmetrical)

[ ! ] JIS standard hex nuts can be used.

CVGA
6W motor specifications

For A*, see below.

25W motor specifications

*For L≧290, four nuts are inserted per groove. If countersunk holes for nut insertion are required, please specify this during additional processing.
[ ! ] The dimensions in the diagram are for belt specification H (thickness 0.9 mm). Please note that belt thickness varies depending on the belt specification. For belt specifications, please see >>here .
[ ! ] Depending on the usage environment, conveyance problems may occur.
[ ! ] For L≧1000, we recommend installing a stand. For details on additional stand processing, please see >>here .
[ ! ] For instructions on searching for maintenance parts (component list) , please see >>here .

■Transportation capacity

*Reference value

[ ! ] Accumulator conveyor (sliding belt

(applies only to the graph)

Please consider the transport capacity.

[ ! ] Conveying capacity varies depending on usage conditions

There may be cases where this is the case.

[ ! ] This graph shows the transport capacity under horizontal conditions.

Gearhead reduction ratio
*May decrease depending on load conditions.

*Reference value

Gearhead reduction ratio	Belt speed (m/min)
Gearhead reduction ratio	50Hz	60Hz
5	56.4	67.7
7.5	37.6	45.1
9	31.3	37.6
12.5	22.6	27.1
15	18.8	22.6
18	15.7	18.8
twenty five	11.3	13.5
30	9.4	11.3
36	7.8	9.4
50	5.6	6.8
60	4.7	5.6
75	3.8	4.5
90	3.1	3.8
100	2.8	3.4
120	2.4	2.8
150	1.9	2.3
180	1.6	1.9

[ ! ] For the IM motor model, the conveying speed is constant at the value shown in the table above.
[ ! ] For the SCM motor model, refer to the value shown in the table above for the maximum speed.

Conveyor Groove Applicable Nut

Insertion position	For L≧290, already inserted into the grooves on the conveyor side (4 pieces/groove). Additional counterbore holes (FYA/FYB) can be added (sold separately).				Post-insertion nuts (sold separately) can be inserted without processing or disassembly
Insertion position	Product name	Model number	Thread nominal	pitch	Product name	Model number	Thread nominal	pitch
X section	JIS Class 1 Hexagon Nut	LBNR3	M3 (coarse)	0.5	-
Y section	JIS Class 1 Hexagon Nut	LBNR6	M6 (coarse)	1.0	Post-assembly nuts for conveyors (10 pcs)	PACK-CHNT6-5	M5 (coarse)	0.8
	-					PACK-CHNT6-4	M4 (coarse)	0.7
	-					PACK-CHNT6-3	M3 (coarse)	0.5

Oriental Motor Speed Controller Dimensions
6W/25W Common

Taiwan Motor Speed Controller Outline Drawing

[ ! ] The speed control motor does not come with a mounting bracket for the speed controller.
If you require a bracket for the speed controller, please select the alteration [SCB].
[ ! ] If you wish to purchase the speed controller bracket separately, please enter the model number [P1-JTEA-12049072] on the " Quote/Order " screen.
[ ! ] There is no input terminal for controlling the speed controller externally.

*Details of A dimension (total motor length)

Output (W)	motor		Reduction ratio	A
	specification	Manufacturer
6W	Induction motor	Oriental Motor	12.5-18	105.0
			25 to 180	115.0
		Made in Taiwan	12.5〜75	114.7
			90-180	120.7
	Speed Control Motor	Oriental Motor	12.5-18	115.0
			25 to 180	125.0
		Made in Taiwan	12.5〜75	126.9
			90-180	132.9
25W	Induction motor	Oriental Motor	5 to 18	117.0
			25 to 180	127.5
		Made in Taiwan	5 to 75	129.0
			90-180	136.0
	Speed Control Motor	Oriental Motor	5 to 18	127.0
			25 to 180	137.5
		Made in Taiwan	5 to 75	139.5
			90-180	146.5

	frame	Motor cover	Pulley holder
[M]Material	Aluminum material	Aluminum material	Aluminum material
[S] Surface Treatment	Anodized aluminum treatment	coating	coating

■Machine weight
(motor output 6W) (kg)

	Pilot length L (mm)
Belt width B (mm)	500	750	1000	1500	2000
50	4.2	5	5.7	7.1	8.7
100	4.9	5.8	6.6	8.4	10.2
150	6.1	7.3	8.5	10.9	13.3
300	7.4	8.9	10.4	13.4	16.3

*The values in the table are for reference only. They may change depending on the belt type, additional processing, etc.
*If the motor output is 25W, add 1.1kg.

Standard table

Model

−

motor

−

Belt specifications

−

Motor manufacturer selection

output

−

Voltage

−

specification

−

Gearhead
reduction ratio

CVGA

−

660

−

T100

−

CVGA

−

660

−

(motor and gearhead not included)

Model

B
designation in 1mm increments

L
specified in 5mm increments

Motor Selection

Belt specifications

Select a motor manufacturer
[!] Prices vary depending on the manufacturer.

Output (W)

Voltage (V)

specification

Gearhead reduction ratio

CVGA

30-300

190-2000

June
25

T100 (single phase)
T200 (single phase)

IM
(induction motor)
SCM
(Speed control motor)

5
18
60
150

7.5
25
75
180

9
30
90

12.5
36
100

15
50
120

H (general use, green)
W (General use, white)
G (Sliding, green)
S (Sliding, white)
D (For electronic component transport)
F (For food transport)
O (Oil-resistant)
N (Non-adhesive)
J (No belt)

*For motor manufacturer B, please select from the "Belt specifications" in the table below.

B (Oriental Motor)
C (Taiwanese motor)

*C may result in a 20% decrease in conveying speed.

twenty five

S200 (three phase)

IM (induction motor)

[NG] When output is 6, 5 to 9 cannot be applied.

June
25

NV (No Motor)

NM (No Motor)

NH (without gearhead)

R (without motor and gearhead)

[ ! ] Wire the motor so that the belt rotates in the standard conveying direction. For wiring diagrams and motor details, see　>>here . [ ! ] For belt details, see >>here .
[ ! ] For instructions on how to specify a conveyor without a motor or gearhead/belt, see >>here .
[ ! ] If you select a conveyor without a motor or gearhead, the motor mounting hole pitch will vary depending on the motor output. For detailed dimensions, please refer to the "Technical Information" section of the " Conveyor Selection Information Site ."

[ ! ] If you select the option without a motor or gearhead, the machine will be delivered in parts. You must assemble it yourself according to the assembly instructions included. For assembly instructions and packaging, please refer to the " Conveyor Selection Information Site ."

[ ! ] The speed control motor does not come with a mounting bracket for the speed controller. If you require a bracket for the speed controller, please select the alteration [SCB].

[ ! ] If you wish to purchase the speed controller bracket separately, please enter the model number [P1-JTEA-12049072] on the " Quote/Order " screen when purchasing.

Belt specifications	Standard belt (base price only)	Optional belt 1 (+¥3,000)	Optional belt 2 (+￥5,500)	Without belt (-￥4,000)
General use	H (Green)　W (White)　HG (Green)	−	HBN (Sky Blue)	J (without belt)
For sliding	G (green)　S (white)	−	−
For inclined transport	LG (green)　LW (white)	−	−
Grip Specifications	−	GG (green)　GW (white)	GSN (green)
Oil-resistant	O (navy blue)　OH (green)　OG (green)	OW (white)	ON (white)
Non-adhesive	N (white)　NS (white)	NB (Sky Blue)　NBG (Lime Green) 　HH (Green)　HW (White)	NWN (white)　NSN (sky blue)　 NGN (lime green) HBG (green)　HBW (white)　BW (white)
For food transport	F (white)	KW (white)　KSB (sky blue)　PHB (sky blue)	PHN (Sky Blue)　PWN (White)　KWN (White)
For transporting electronic parts	D (black)　DS (black)	−	DG (black)

[ ! ] For details on flat belts, see >>here .
[ ! ] For motor manufacturer C (motors made in Taiwan), select H, W, G, S, D, F, O, N, or J (no belt).
[ ! ] Oil-resistant belts cannot be used in environments where oil may adhere to the backside.
[ ! ] Belt length calculation formula: (2L + 94) / 1000, rounded to the third decimal place. Unit: m (L = length between pulleys).
[ ! ] A video introducing the belt replacement procedure for Misumi conveyors is available. >>here (reference).
[ ! ] For the Misumi conveyor general instruction manual, see >>here .

Speed control motor model number

motor			Oriental Motor		Taiwanese motor
			Motor model number	Gearhead model number *□ is where the reduction ratio is entered		Gearhead model number *□ is where the reduction ratio is entered
					Motor model number
output	specification	Voltage
6W	Speed Control Motor	Single-phase 100V	US206-401	2GN□S	PACMSV-UT60-W6-V100	PACMGXT60-□
		Single-phase 200V	US206-402		PACMSV-UT60-W6-V200
25W	Speed Control Motor	Single-phase 100V	US425-401	4GN□S	PACMSV-UT80-W25-V100	PACMGXT80-□
		Single-phase 200V	US425-402		PACMSV-UT80-W25-V200
remarks			[ ! ] The speed control motor includes the following: motor, speed control unit, capacitor, speed control mounting screws, instruction manual 60W and 90W only.		[ ! ] The speed control motor includes the following: motor, speed control unit . [ NG ] The motor cable of the speed control motor cannot be extended.

Extension connection cable for Oriental Motor speed control motor (sold separately)

Motor Output	Extension connection cable model number
	length	Single-phase 100V, single-phase 200V	Single-phase 110V, single-phase 115V , single-phase 220V, single-phase 230V

6W 25W	1m	CC-1	CC01SU05
	2m	CC-2	CC02SU05
	3m	CC-3	CC03SU05
	4m	CC-4	CC04SU05
		- The maximum cable extension distance is 4m.	- The maximum cable extension distance is 10m.

[ ! ] The motor cable of the Taiwanese speed control motor cannot be extended.

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 45; 60

1
2
3
4
Next >>

Part Number
CVGA-[30-300/1]-[190-2000/5]-[6,25]-NV-[IM,NM,SCM]-[5,7.5,9,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180,NH]-BW-[A,B,C,R]
CVGA-[30-300/1]-[190-2000/5]-[6,25]-NV-[IM,NM,SCM]-[5,7.5,9,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180,NH]-D-[A,B,C,R]
CVGA-[30-300/1]-[190-2000/5]-[6,25]-NV-[IM,NM,SCM]-[5,7.5,9,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180,NH]-DG-[A,B,C,R]
CVGA-[30-300/1]-[190-2000/5]-[6,25]-NV-[IM,NM,SCM]-[5,7.5,9,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180,NH]-DS-[A,B,C,R]
CVGA-[30-300/1]-[190-2000/5]-[6,25]-NV-[IM,NM,SCM]-[5,7.5,9,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180,NH]-F-[A,B,C,R]
CVGA-[30-300/1]-[190-2000/5]-[6,25]-NV-[IM,NM,SCM]-[5,7.5,9,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180,NH]-G-[A,B,C,R]
CVGA-[30-300/1]-[190-2000/5]-[6,25]-NV-[IM,NM,SCM]-[5,7.5,9,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180,NH]-GG-[A,B,C,R]
CVGA-[30-300/1]-[190-2000/5]-[6,25]-NV-[IM,NM,SCM]-[5,7.5,9,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180,NH]-GSN-[A,B,C,R]
CVGA-[30-300/1]-[190-2000/5]-[6,25]-NV-[IM,NM,SCM]-[5,7.5,9,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180,NH]-GW-[A,B,C,R]
CVGA-[30-300/1]-[190-2000/5]-[6,25]-NV-[IM,NM,SCM]-[5,7.5,9,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180,NH]-H-[A,B,C,R]
CVGA-[30-300/1]-[190-2000/5]-[6,25]-NV-[IM,NM,SCM]-[5,7.5,9,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180,NH]-HBG-[A,B,C,R]
CVGA-[30-300/1]-[190-2000/5]-[6,25]-NV-[IM,NM,SCM]-[5,7.5,9,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180,NH]-HBN-[A,B,C,R]
CVGA-[30-300/1]-[190-2000/5]-[6,25]-NV-[IM,NM,SCM]-[5,7.5,9,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180,NH]-HBW-[A,B,C,R]
CVGA-[30-300/1]-[190-2000/5]-[6,25]-NV-[IM,NM,SCM]-[5,7.5,9,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180,NH]-HG-[A,B,C,R]
CVGA-[30-300/1]-[190-2000/5]-[6,25]-NV-[IM,NM,SCM]-[5,7.5,9,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180,NH]-HH-[A,B,C,R]
CVGA-[30-300/1]-[190-2000/5]-[6,25]-NV-[IM,NM,SCM]-[5,7.5,9,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180,NH]-HW-[A,B,C,R]
CVGA-[30-300/1]-[190-2000/5]-[6,25]-NV-[IM,NM,SCM]-[5,7.5,9,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180,NH]-HY-[A,B,C,R]
CVGA-[30-300/1]-[190-2000/5]-[6,25]-NV-[IM,NM,SCM]-[5,7.5,9,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180,NH]-J-[A,B,C,R]
CVGA-[30-300/1]-[190-2000/5]-[6,25]-NV-[IM,NM,SCM]-[5,7.5,9,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180,NH]-KSB-[A,B,C,R]
CVGA-[30-300/1]-[190-2000/5]-[6,25]-NV-[IM,NM,SCM]-[5,7.5,9,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180,NH]-KW-[A,B,C,R]
CVGA-[30-300/1]-[190-2000/5]-[6,25]-NV-[IM,NM,SCM]-[5,7.5,9,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180,NH]-KWN-[A,B,C,R]
CVGA-[30-300/1]-[190-2000/5]-[6,25]-NV-[IM,NM,SCM]-[5,7.5,9,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180,NH]-LG-[A,B,C,R]
CVGA-[30-300/1]-[190-2000/5]-[6,25]-NV-[IM,NM,SCM]-[5,7.5,9,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180,NH]-LW-[A,B,C,R]
CVGA-[30-300/1]-[190-2000/5]-[6,25]-NV-[IM,NM,SCM]-[5,7.5,9,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180,NH]-N-[A,B,C,R]
CVGA-[30-300/1]-[190-2000/5]-[6,25]-NV-[IM,NM,SCM]-[5,7.5,9,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180,NH]-NB-[A,B,C,R]
CVGA-[30-300/1]-[190-2000/5]-[6,25]-NV-[IM,NM,SCM]-[5,7.5,9,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180,NH]-NBG-[A,B,C,R]
CVGA-[30-300/1]-[190-2000/5]-[6,25]-NV-[IM,NM,SCM]-[5,7.5,9,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180,NH]-NGN-[A,B,C,R]
CVGA-[30-300/1]-[190-2000/5]-[6,25]-NV-[IM,NM,SCM]-[5,7.5,9,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180,NH]-NS-[A,B,C,R]
CVGA-[30-300/1]-[190-2000/5]-[6,25]-NV-[IM,NM,SCM]-[5,7.5,9,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180,NH]-NSN-[A,B,C,R]
CVGA-[30-300/1]-[190-2000/5]-[6,25]-NV-[IM,NM,SCM]-[5,7.5,9,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180,NH]-NWN-[A,B,C,R]
CVGA-[30-300/1]-[190-2000/5]-[6,25]-NV-[IM,NM,SCM]-[5,7.5,9,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180,NH]-O-[A,B,C,R]
CVGA-[30-300/1]-[190-2000/5]-[6,25]-NV-[IM,NM,SCM]-[5,7.5,9,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180,NH]-OG-[A,B,C,R]
CVGA-[30-300/1]-[190-2000/5]-[6,25]-NV-[IM,NM,SCM]-[5,7.5,9,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180,NH]-OH-[A,B,C,R]
CVGA-[30-300/1]-[190-2000/5]-[6,25]-NV-[IM,NM,SCM]-[5,7.5,9,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180,NH]-ON-[A,B,C,R]
CVGA-[30-300/1]-[190-2000/5]-[6,25]-NV-[IM,NM,SCM]-[5,7.5,9,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180,NH]-OW-[A,B,C,R]
CVGA-[30-300/1]-[190-2000/5]-[6,25]-NV-[IM,NM,SCM]-[5,7.5,9,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180,NH]-PHB-[A,B,C,R]
CVGA-[30-300/1]-[190-2000/5]-[6,25]-NV-[IM,NM,SCM]-[5,7.5,9,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180,NH]-PHN-[A,B,C,R]
CVGA-[30-300/1]-[190-2000/5]-[6,25]-NV-[IM,NM,SCM]-[5,7.5,9,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180,NH]-PWN-[A,B,C,R]
CVGA-[30-300/1]-[190-2000/5]-[6,25]-NV-[IM,NM,SCM]-[5,7.5,9,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180,NH]-S-[A,B,C,R]
CVGA-[30-300/1]-[190-2000/5]-[6,25]-NV-[IM,NM,SCM]-[5,7.5,9,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180,NH]-W-[A,B,C,R]
CVGA-[30-300/1]-[190-2000/5]-[6,25]-S200-[IM,NM,SCM]-[5,7.5,9,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180,NH]-BW-[A,B,C,R]
CVGA-[30-300/1]-[190-2000/5]-[6,25]-S200-[IM,NM,SCM]-[5,7.5,9,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180,NH]-D-[A,B,C,R]
CVGA-[30-300/1]-[190-2000/5]-[6,25]-S200-[IM,NM,SCM]-[5,7.5,9,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180,NH]-DG-[A,B,C,R]
CVGA-[30-300/1]-[190-2000/5]-[6,25]-S200-[IM,NM,SCM]-[5,7.5,9,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180,NH]-DS-[A,B,C,R]
CVGA-[30-300/1]-[190-2000/5]-[6,25]-S200-[IM,NM,SCM]-[5,7.5,9,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180,NH]-F-[A,B,C,R]
CVGA-[30-300/1]-[190-2000/5]-[6,25]-S200-[IM,NM,SCM]-[5,7.5,9,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180,NH]-G-[A,B,C,R]
CVGA-[30-300/1]-[190-2000/5]-[6,25]-S200-[IM,NM,SCM]-[5,7.5,9,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180,NH]-GG-[A,B,C,R]
CVGA-[30-300/1]-[190-2000/5]-[6,25]-S200-[IM,NM,SCM]-[5,7.5,9,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180,NH]-GSN-[A,B,C,R]
CVGA-[30-300/1]-[190-2000/5]-[6,25]-S200-[IM,NM,SCM]-[5,7.5,9,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180,NH]-GW-[A,B,C,R]
CVGA-[30-300/1]-[190-2000/5]-[6,25]-S200-[IM,NM,SCM]-[5,7.5,9,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180,NH]-H-[A,B,C,R]
CVGA-[30-300/1]-[190-2000/5]-[6,25]-S200-[IM,NM,SCM]-[5,7.5,9,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180,NH]-HBG-[A,B,C,R]
CVGA-[30-300/1]-[190-2000/5]-[6,25]-S200-[IM,NM,SCM]-[5,7.5,9,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180,NH]-HBN-[A,B,C,R]
CVGA-[30-300/1]-[190-2000/5]-[6,25]-S200-[IM,NM,SCM]-[5,7.5,9,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180,NH]-HBW-[A,B,C,R]
CVGA-[30-300/1]-[190-2000/5]-[6,25]-S200-[IM,NM,SCM]-[5,7.5,9,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180,NH]-HG-[A,B,C,R]
CVGA-[30-300/1]-[190-2000/5]-[6,25]-S200-[IM,NM,SCM]-[5,7.5,9,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180,NH]-HH-[A,B,C,R]
CVGA-[30-300/1]-[190-2000/5]-[6,25]-S200-[IM,NM,SCM]-[5,7.5,9,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180,NH]-HW-[A,B,C,R]
CVGA-[30-300/1]-[190-2000/5]-[6,25]-S200-[IM,NM,SCM]-[5,7.5,9,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180,NH]-HY-[A,B,C,R]
CVGA-[30-300/1]-[190-2000/5]-[6,25]-S200-[IM,NM,SCM]-[5,7.5,9,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180,NH]-J-[A,B,C,R]
CVGA-[30-300/1]-[190-2000/5]-[6,25]-S200-[IM,NM,SCM]-[5,7.5,9,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180,NH]-KSB-[A,B,C,R]
CVGA-[30-300/1]-[190-2000/5]-[6,25]-S200-[IM,NM,SCM]-[5,7.5,9,12.5,15,18,25,30,36,50,60,75,90,100,120,150,180,NH]-KW-[A,B,C,R]

Standard Unit Price	Minimum order quantity	Days to Ship	Belt Width/Belt Pitch B (mm)	Conveyance Length	BW	Belt Specification	Belt Specification (Standard Belt)	Motor Manufacturer Selection	DG	Motor Output (W)	Motor Specifications	DS	GG	Motor Voltage (No Motor)	Motor Voltage S (3-Phase) * Domestic (V)	GSN	GW	Motor Voltage SA (3-Phase) * Universal (V)	HBG	Motor Voltage T (Single-Phase) * Domestic (V)	HBN	Motor Voltage TA (Single-Phase) * Universal (V)	HBW	Reduction Ratio of Gear Head	HG	HH	HW	HY	KSB	KW	KWN	LG	LW	NB	NBG	NGN	NS	NSN	NWN	OG	OH	ON	OW	PHB	PHN	PWN
-	1 Piece(s)	17 Day(s) or more	30 ～ 300	190 ～ 2000	BW	-	-	[B] Oriental Motor / [C] Taiwanese Motor / [R] No Motor / [R] No Motor, Gearhead	-	6 ～ 25	Induction Motor [IM] / No Motor [NM] / Variable Speed Motor [SCM]	-	-	No Motor [NV]	-	-	-	-	-	-	-	-	-	5 / 7.5 / 9 / 12.5 / 15 / 18 / 25 / 30 / 36 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180 / No Gearhead [NH]	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	17 Day(s) or more	30 ～ 300	190 ～ 2000	-	-	For Electronic Parts Transfer, Black [D]	[B] Oriental Motor / [C] Taiwanese Motor / [R] No Motor / [R] No Motor, Gearhead	-	6 ～ 25	Induction Motor [IM] / No Motor [NM] / Variable Speed Motor [SCM]	-	-	No Motor [NV]	-	-	-	-	-	-	-	-	-	5 / 7.5 / 9 / 12.5 / 15 / 18 / 25 / 30 / 36 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180 / No Gearhead [NH]	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	17 Day(s) or more	30 ～ 300	190 ～ 2000	-	-	-	[B] Oriental Motor / [C] Taiwanese Motor / [R] No Motor / [R] No Motor, Gearhead	DG	6 ～ 25	Induction Motor [IM] / No Motor [NM] / Variable Speed Motor [SCM]	-	-	No Motor [NV]	-	-	-	-	-	-	-	-	-	5 / 7.5 / 9 / 12.5 / 15 / 18 / 25 / 30 / 36 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180 / No Gearhead [NH]	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	17 Day(s) or more	30 ～ 300	190 ～ 2000	-	-	-	[B] Oriental Motor / [C] Taiwanese Motor / [R] No Motor / [R] No Motor, Gearhead	-	6 ～ 25	Induction Motor [IM] / No Motor [NM] / Variable Speed Motor [SCM]	DS	-	No Motor [NV]	-	-	-	-	-	-	-	-	-	5 / 7.5 / 9 / 12.5 / 15 / 18 / 25 / 30 / 36 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180 / No Gearhead [NH]	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	17 Day(s) or more	30 ～ 300	190 ～ 2000	-	-	For Food Transfer, White [F]	[B] Oriental Motor / [C] Taiwanese Motor / [R] No Motor / [R] No Motor, Gearhead	-	6 ～ 25	Induction Motor [IM] / No Motor [NM] / Variable Speed Motor [SCM]	-	-	No Motor [NV]	-	-	-	-	-	-	-	-	-	5 / 7.5 / 9 / 12.5 / 15 / 18 / 25 / 30 / 36 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180 / No Gearhead [NH]	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	17 Day(s) or more	30 ～ 300	190 ～ 2000	-	-	For Sliding, Green [G] (Specifications Usage Vertical direction)	[B] Oriental Motor / [C] Taiwanese Motor / [R] No Motor / [R] No Motor, Gearhead	-	6 ～ 25	Induction Motor [IM] / No Motor [NM] / Variable Speed Motor [SCM]	-	-	No Motor [NV]	-	-	-	-	-	-	-	-	-	5 / 7.5 / 9 / 12.5 / 15 / 18 / 25 / 30 / 36 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180 / No Gearhead [NH]	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	17 Day(s) or more	30 ～ 300	190 ～ 2000	-	-	-	[B] Oriental Motor / [C] Taiwanese Motor / [R] No Motor / [R] No Motor, Gearhead	-	6 ～ 25	Induction Motor [IM] / No Motor [NM] / Variable Speed Motor [SCM]	-	GG	No Motor [NV]	-	-	-	-	-	-	-	-	-	5 / 7.5 / 9 / 12.5 / 15 / 18 / 25 / 30 / 36 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180 / No Gearhead [NH]	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	17 Day(s) or more	30 ～ 300	190 ～ 2000	-	-	-	[B] Oriental Motor / [C] Taiwanese Motor / [R] No Motor / [R] No Motor, Gearhead	-	6 ～ 25	Induction Motor [IM] / No Motor [NM] / Variable Speed Motor [SCM]	-	-	No Motor [NV]	-	GSN	-	-	-	-	-	-	-	5 / 7.5 / 9 / 12.5 / 15 / 18 / 25 / 30 / 36 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180 / No Gearhead [NH]	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	17 Day(s) or more	30 ～ 300	190 ～ 2000	-	-	-	[B] Oriental Motor / [C] Taiwanese Motor / [R] No Motor / [R] No Motor, Gearhead	-	6 ～ 25	Induction Motor [IM] / No Motor [NM] / Variable Speed Motor [SCM]	-	-	No Motor [NV]	-	-	GW	-	-	-	-	-	-	5 / 7.5 / 9 / 12.5 / 15 / 18 / 25 / 30 / 36 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180 / No Gearhead [NH]	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	17 Day(s) or more	30 ～ 300	190 ～ 2000	-	-	General Purpose, Green [H]	[B] Oriental Motor / [C] Taiwanese Motor / [R] No Motor / [R] No Motor, Gearhead	-	6 ～ 25	Induction Motor [IM] / No Motor [NM] / Variable Speed Motor [SCM]	-	-	No Motor [NV]	-	-	-	-	-	-	-	-	-	5 / 7.5 / 9 / 12.5 / 15 / 18 / 25 / 30 / 36 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180 / No Gearhead [NH]	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	17 Day(s) or more	30 ～ 300	190 ～ 2000	-	-	-	[B] Oriental Motor / [C] Taiwanese Motor / [R] No Motor / [R] No Motor, Gearhead	-	6 ～ 25	Induction Motor [IM] / No Motor [NM] / Variable Speed Motor [SCM]	-	-	No Motor [NV]	-	-	-	-	HBG	-	-	-	-	5 / 7.5 / 9 / 12.5 / 15 / 18 / 25 / 30 / 36 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180 / No Gearhead [NH]	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	17 Day(s) or more	30 ～ 300	190 ～ 2000	-	-	-	[B] Oriental Motor / [C] Taiwanese Motor / [R] No Motor / [R] No Motor, Gearhead	-	6 ～ 25	Induction Motor [IM] / No Motor [NM] / Variable Speed Motor [SCM]	-	-	No Motor [NV]	-	-	-	-	-	-	HBN	-	-	5 / 7.5 / 9 / 12.5 / 15 / 18 / 25 / 30 / 36 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180 / No Gearhead [NH]	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	17 Day(s) or more	30 ～ 300	190 ～ 2000	-	-	-	[B] Oriental Motor / [C] Taiwanese Motor / [R] No Motor / [R] No Motor, Gearhead	-	6 ～ 25	Induction Motor [IM] / No Motor [NM] / Variable Speed Motor [SCM]	-	-	No Motor [NV]	-	-	-	-	-	-	-	-	HBW	5 / 7.5 / 9 / 12.5 / 15 / 18 / 25 / 30 / 36 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180 / No Gearhead [NH]	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	17 Day(s) or more	30 ～ 300	190 ～ 2000	-	-	-	[B] Oriental Motor / [C] Taiwanese Motor / [R] No Motor / [R] No Motor, Gearhead	-	6 ～ 25	Induction Motor [IM] / No Motor [NM] / Variable Speed Motor [SCM]	-	-	No Motor [NV]	-	-	-	-	-	-	-	-	-	5 / 7.5 / 9 / 12.5 / 15 / 18 / 25 / 30 / 36 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180 / No Gearhead [NH]	HG	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	17 Day(s) or more	30 ～ 300	190 ～ 2000	-	-	-	[B] Oriental Motor / [C] Taiwanese Motor / [R] No Motor / [R] No Motor, Gearhead	-	6 ～ 25	Induction Motor [IM] / No Motor [NM] / Variable Speed Motor [SCM]	-	-	No Motor [NV]	-	-	-	-	-	-	-	-	-	5 / 7.5 / 9 / 12.5 / 15 / 18 / 25 / 30 / 36 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180 / No Gearhead [NH]	-	HH	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	17 Day(s) or more	30 ～ 300	190 ～ 2000	-	-	-	[B] Oriental Motor / [C] Taiwanese Motor / [R] No Motor / [R] No Motor, Gearhead	-	6 ～ 25	Induction Motor [IM] / No Motor [NM] / Variable Speed Motor [SCM]	-	-	No Motor [NV]	-	-	-	-	-	-	-	-	-	5 / 7.5 / 9 / 12.5 / 15 / 18 / 25 / 30 / 36 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180 / No Gearhead [NH]	-	-	HW	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	17 Day(s) or more	30 ～ 300	190 ～ 2000	-	-	-	[B] Oriental Motor / [C] Taiwanese Motor / [R] No Motor / [R] No Motor, Gearhead	-	6 ～ 25	Induction Motor [IM] / No Motor [NM] / Variable Speed Motor [SCM]	-	-	No Motor [NV]	-	-	-	-	-	-	-	-	-	5 / 7.5 / 9 / 12.5 / 15 / 18 / 25 / 30 / 36 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180 / No Gearhead [NH]	-	-	-	HY	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	17 Day(s) or more	30 ～ 300	190 ～ 2000	-	No Belt [J]	-	[B] Oriental Motor / [C] Taiwanese Motor / [R] No Motor / [R] No Motor, Gearhead	-	6 ～ 25	Induction Motor [IM] / No Motor [NM] / Variable Speed Motor [SCM]	-	-	No Motor [NV]	-	-	-	-	-	-	-	-	-	5 / 7.5 / 9 / 12.5 / 15 / 18 / 25 / 30 / 36 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180 / No Gearhead [NH]	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	17 Day(s) or more	30 ～ 300	190 ～ 2000	-	-	-	[B] Oriental Motor / [C] Taiwanese Motor / [R] No Motor / [R] No Motor, Gearhead	-	6 ～ 25	Induction Motor [IM] / No Motor [NM] / Variable Speed Motor [SCM]	-	-	No Motor [NV]	-	-	-	-	-	-	-	-	-	5 / 7.5 / 9 / 12.5 / 15 / 18 / 25 / 30 / 36 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180 / No Gearhead [NH]	-	-	-	-	KSB	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	17 Day(s) or more	30 ～ 300	190 ～ 2000	-	-	-	[B] Oriental Motor / [C] Taiwanese Motor / [R] No Motor / [R] No Motor, Gearhead	-	6 ～ 25	Induction Motor [IM] / No Motor [NM] / Variable Speed Motor [SCM]	-	-	No Motor [NV]	-	-	-	-	-	-	-	-	-	5 / 7.5 / 9 / 12.5 / 15 / 18 / 25 / 30 / 36 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180 / No Gearhead [NH]	-	-	-	-	-	KW	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	17 Day(s) or more	30 ～ 300	190 ～ 2000	-	-	-	[B] Oriental Motor / [C] Taiwanese Motor / [R] No Motor / [R] No Motor, Gearhead	-	6 ～ 25	Induction Motor [IM] / No Motor [NM] / Variable Speed Motor [SCM]	-	-	No Motor [NV]	-	-	-	-	-	-	-	-	-	5 / 7.5 / 9 / 12.5 / 15 / 18 / 25 / 30 / 36 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180 / No Gearhead [NH]	-	-	-	-	-	-	KWN	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	17 Day(s) or more	30 ～ 300	190 ～ 2000	-	-	-	[B] Oriental Motor / [C] Taiwanese Motor / [R] No Motor / [R] No Motor, Gearhead	-	6 ～ 25	Induction Motor [IM] / No Motor [NM] / Variable Speed Motor [SCM]	-	-	No Motor [NV]	-	-	-	-	-	-	-	-	-	5 / 7.5 / 9 / 12.5 / 15 / 18 / 25 / 30 / 36 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180 / No Gearhead [NH]	-	-	-	-	-	-	-	LG	-	-	-	-	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	17 Day(s) or more	30 ～ 300	190 ～ 2000	-	-	-	[B] Oriental Motor / [C] Taiwanese Motor / [R] No Motor / [R] No Motor, Gearhead	-	6 ～ 25	Induction Motor [IM] / No Motor [NM] / Variable Speed Motor [SCM]	-	-	No Motor [NV]	-	-	-	-	-	-	-	-	-	5 / 7.5 / 9 / 12.5 / 15 / 18 / 25 / 30 / 36 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180 / No Gearhead [NH]	-	-	-	-	-	-	-	-	LW	-	-	-	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	17 Day(s) or more	30 ～ 300	190 ～ 2000	-	-	Non-adhesive, White [N]	[B] Oriental Motor / [C] Taiwanese Motor / [R] No Motor / [R] No Motor, Gearhead	-	6 ～ 25	Induction Motor [IM] / No Motor [NM] / Variable Speed Motor [SCM]	-	-	No Motor [NV]	-	-	-	-	-	-	-	-	-	5 / 7.5 / 9 / 12.5 / 15 / 18 / 25 / 30 / 36 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180 / No Gearhead [NH]	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	17 Day(s) or more	30 ～ 300	190 ～ 2000	-	-	-	[B] Oriental Motor / [C] Taiwanese Motor / [R] No Motor / [R] No Motor, Gearhead	-	6 ～ 25	Induction Motor [IM] / No Motor [NM] / Variable Speed Motor [SCM]	-	-	No Motor [NV]	-	-	-	-	-	-	-	-	-	5 / 7.5 / 9 / 12.5 / 15 / 18 / 25 / 30 / 36 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180 / No Gearhead [NH]	-	-	-	-	-	-	-	-	-	NB	-	-	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	17 Day(s) or more	30 ～ 300	190 ～ 2000	-	-	-	[B] Oriental Motor / [C] Taiwanese Motor / [R] No Motor / [R] No Motor, Gearhead	-	6 ～ 25	Induction Motor [IM] / No Motor [NM] / Variable Speed Motor [SCM]	-	-	No Motor [NV]	-	-	-	-	-	-	-	-	-	5 / 7.5 / 9 / 12.5 / 15 / 18 / 25 / 30 / 36 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180 / No Gearhead [NH]	-	-	-	-	-	-	-	-	-	-	NBG	-	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	17 Day(s) or more	30 ～ 300	190 ～ 2000	-	-	-	[B] Oriental Motor / [C] Taiwanese Motor / [R] No Motor / [R] No Motor, Gearhead	-	6 ～ 25	Induction Motor [IM] / No Motor [NM] / Variable Speed Motor [SCM]	-	-	No Motor [NV]	-	-	-	-	-	-	-	-	-	5 / 7.5 / 9 / 12.5 / 15 / 18 / 25 / 30 / 36 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180 / No Gearhead [NH]	-	-	-	-	-	-	-	-	-	-	-	NGN	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	17 Day(s) or more	30 ～ 300	190 ～ 2000	-	-	-	[B] Oriental Motor / [C] Taiwanese Motor / [R] No Motor / [R] No Motor, Gearhead	-	6 ～ 25	Induction Motor [IM] / No Motor [NM] / Variable Speed Motor [SCM]	-	-	No Motor [NV]	-	-	-	-	-	-	-	-	-	5 / 7.5 / 9 / 12.5 / 15 / 18 / 25 / 30 / 36 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180 / No Gearhead [NH]	-	-	-	-	-	-	-	-	-	-	-	-	NS	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	17 Day(s) or more	30 ～ 300	190 ～ 2000	-	-	-	[B] Oriental Motor / [C] Taiwanese Motor / [R] No Motor / [R] No Motor, Gearhead	-	6 ～ 25	Induction Motor [IM] / No Motor [NM] / Variable Speed Motor [SCM]	-	-	No Motor [NV]	-	-	-	-	-	-	-	-	-	5 / 7.5 / 9 / 12.5 / 15 / 18 / 25 / 30 / 36 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180 / No Gearhead [NH]	-	-	-	-	-	-	-	-	-	-	-	-	-	NSN	-	-	-	-	-	-	-	-
-	1 Piece(s)	17 Day(s) or more	30 ～ 300	190 ～ 2000	-	-	-	[B] Oriental Motor / [C] Taiwanese Motor / [R] No Motor / [R] No Motor, Gearhead	-	6 ～ 25	Induction Motor [IM] / No Motor [NM] / Variable Speed Motor [SCM]	-	-	No Motor [NV]	-	-	-	-	-	-	-	-	-	5 / 7.5 / 9 / 12.5 / 15 / 18 / 25 / 30 / 36 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180 / No Gearhead [NH]	-	-	-	-	-	-	-	-	-	-	-	-	-	-	NWN	-	-	-	-	-	-	-
-	1 Piece(s)	17 Day(s) or more	30 ～ 300	190 ～ 2000	-	-	Oil Resistant, Navy Blue [O]	[B] Oriental Motor / [C] Taiwanese Motor / [R] No Motor / [R] No Motor, Gearhead	-	6 ～ 25	Induction Motor [IM] / No Motor [NM] / Variable Speed Motor [SCM]	-	-	No Motor [NV]	-	-	-	-	-	-	-	-	-	5 / 7.5 / 9 / 12.5 / 15 / 18 / 25 / 30 / 36 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180 / No Gearhead [NH]	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	17 Day(s) or more	30 ～ 300	190 ～ 2000	-	-	-	[B] Oriental Motor / [C] Taiwanese Motor / [R] No Motor / [R] No Motor, Gearhead	-	6 ～ 25	Induction Motor [IM] / No Motor [NM] / Variable Speed Motor [SCM]	-	-	No Motor [NV]	-	-	-	-	-	-	-	-	-	5 / 7.5 / 9 / 12.5 / 15 / 18 / 25 / 30 / 36 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180 / No Gearhead [NH]	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	OG	-	-	-	-	-	-
-	1 Piece(s)	17 Day(s) or more	30 ～ 300	190 ～ 2000	-	-	-	[B] Oriental Motor / [C] Taiwanese Motor / [R] No Motor / [R] No Motor, Gearhead	-	6 ～ 25	Induction Motor [IM] / No Motor [NM] / Variable Speed Motor [SCM]	-	-	No Motor [NV]	-	-	-	-	-	-	-	-	-	5 / 7.5 / 9 / 12.5 / 15 / 18 / 25 / 30 / 36 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180 / No Gearhead [NH]	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	OH	-	-	-	-	-
-	1 Piece(s)	17 Day(s) or more	30 ～ 300	190 ～ 2000	-	-	-	[B] Oriental Motor / [C] Taiwanese Motor / [R] No Motor / [R] No Motor, Gearhead	-	6 ～ 25	Induction Motor [IM] / No Motor [NM] / Variable Speed Motor [SCM]	-	-	No Motor [NV]	-	-	-	-	-	-	-	-	-	5 / 7.5 / 9 / 12.5 / 15 / 18 / 25 / 30 / 36 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180 / No Gearhead [NH]	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	ON	-	-	-	-
-	1 Piece(s)	17 Day(s) or more	30 ～ 300	190 ～ 2000	-	-	-	[B] Oriental Motor / [C] Taiwanese Motor / [R] No Motor / [R] No Motor, Gearhead	-	6 ～ 25	Induction Motor [IM] / No Motor [NM] / Variable Speed Motor [SCM]	-	-	No Motor [NV]	-	-	-	-	-	-	-	-	-	5 / 7.5 / 9 / 12.5 / 15 / 18 / 25 / 30 / 36 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180 / No Gearhead [NH]	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	OW	-	-	-
-	1 Piece(s)	17 Day(s) or more	30 ～ 300	190 ～ 2000	-	-	-	[B] Oriental Motor / [C] Taiwanese Motor / [R] No Motor / [R] No Motor, Gearhead	-	6 ～ 25	Induction Motor [IM] / No Motor [NM] / Variable Speed Motor [SCM]	-	-	No Motor [NV]	-	-	-	-	-	-	-	-	-	5 / 7.5 / 9 / 12.5 / 15 / 18 / 25 / 30 / 36 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180 / No Gearhead [NH]	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	PHB	-	-
-	1 Piece(s)	17 Day(s) or more	30 ～ 300	190 ～ 2000	-	-	-	[B] Oriental Motor / [C] Taiwanese Motor / [R] No Motor / [R] No Motor, Gearhead	-	6 ～ 25	Induction Motor [IM] / No Motor [NM] / Variable Speed Motor [SCM]	-	-	No Motor [NV]	-	-	-	-	-	-	-	-	-	5 / 7.5 / 9 / 12.5 / 15 / 18 / 25 / 30 / 36 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180 / No Gearhead [NH]	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	PHN	-
-	1 Piece(s)	17 Day(s) or more	30 ～ 300	190 ～ 2000	-	-	-	[B] Oriental Motor / [C] Taiwanese Motor / [R] No Motor / [R] No Motor, Gearhead	-	6 ～ 25	Induction Motor [IM] / No Motor [NM] / Variable Speed Motor [SCM]	-	-	No Motor [NV]	-	-	-	-	-	-	-	-	-	5 / 7.5 / 9 / 12.5 / 15 / 18 / 25 / 30 / 36 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180 / No Gearhead [NH]	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	PWN
-	1 Piece(s)	17 Day(s) or more	30 ～ 300	190 ～ 2000	-	-	For Sliding, White [S] (Specifications Usage Vertical direction)	[B] Oriental Motor / [C] Taiwanese Motor / [R] No Motor / [R] No Motor, Gearhead	-	6 ～ 25	Induction Motor [IM] / No Motor [NM] / Variable Speed Motor [SCM]	-	-	No Motor [NV]	-	-	-	-	-	-	-	-	-	5 / 7.5 / 9 / 12.5 / 15 / 18 / 25 / 30 / 36 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180 / No Gearhead [NH]	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	17 Day(s) or more	30 ～ 300	190 ～ 2000	-	-	General Purpose, White [W]	[B] Oriental Motor / [C] Taiwanese Motor / [R] No Motor / [R] No Motor, Gearhead	-	6 ～ 25	Induction Motor [IM] / No Motor [NM] / Variable Speed Motor [SCM]	-	-	No Motor [NV]	-	-	-	-	-	-	-	-	-	5 / 7.5 / 9 / 12.5 / 15 / 18 / 25 / 30 / 36 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180 / No Gearhead [NH]	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	17 Day(s) or more	30 ～ 300	190 ～ 2000	BW	-	-	[B] Oriental Motor / [C] Taiwanese Motor / [R] No Motor / [R] No Motor, Gearhead	-	6 ～ 25	Induction Motor [IM] / No Motor [NM] / Variable Speed Motor [SCM]	-	-	-	200	-	-	-	-	-	-	-	-	5 / 7.5 / 9 / 12.5 / 15 / 18 / 25 / 30 / 36 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180 / No Gearhead [NH]	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	17 Day(s) or more	30 ～ 300	190 ～ 2000	-	-	For Electronic Parts Transfer, Black [D]	[B] Oriental Motor / [C] Taiwanese Motor / [R] No Motor / [R] No Motor, Gearhead	-	6 ～ 25	Induction Motor [IM] / No Motor [NM] / Variable Speed Motor [SCM]	-	-	-	200	-	-	-	-	-	-	-	-	5 / 7.5 / 9 / 12.5 / 15 / 18 / 25 / 30 / 36 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180 / No Gearhead [NH]	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	17 Day(s) or more	30 ～ 300	190 ～ 2000	-	-	-	[B] Oriental Motor / [C] Taiwanese Motor / [R] No Motor / [R] No Motor, Gearhead	DG	6 ～ 25	Induction Motor [IM] / No Motor [NM] / Variable Speed Motor [SCM]	-	-	-	200	-	-	-	-	-	-	-	-	5 / 7.5 / 9 / 12.5 / 15 / 18 / 25 / 30 / 36 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180 / No Gearhead [NH]	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	17 Day(s) or more	30 ～ 300	190 ～ 2000	-	-	-	[B] Oriental Motor / [C] Taiwanese Motor / [R] No Motor / [R] No Motor, Gearhead	-	6 ～ 25	Induction Motor [IM] / No Motor [NM] / Variable Speed Motor [SCM]	DS	-	-	200	-	-	-	-	-	-	-	-	5 / 7.5 / 9 / 12.5 / 15 / 18 / 25 / 30 / 36 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180 / No Gearhead [NH]	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	17 Day(s) or more	30 ～ 300	190 ～ 2000	-	-	For Food Transfer, White [F]	[B] Oriental Motor / [C] Taiwanese Motor / [R] No Motor / [R] No Motor, Gearhead	-	6 ～ 25	Induction Motor [IM] / No Motor [NM] / Variable Speed Motor [SCM]	-	-	-	200	-	-	-	-	-	-	-	-	5 / 7.5 / 9 / 12.5 / 15 / 18 / 25 / 30 / 36 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180 / No Gearhead [NH]	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	17 Day(s) or more	30 ～ 300	190 ～ 2000	-	-	For Sliding, Green [G] (Specifications Usage Vertical direction)	[B] Oriental Motor / [C] Taiwanese Motor / [R] No Motor / [R] No Motor, Gearhead	-	6 ～ 25	Induction Motor [IM] / No Motor [NM] / Variable Speed Motor [SCM]	-	-	-	200	-	-	-	-	-	-	-	-	5 / 7.5 / 9 / 12.5 / 15 / 18 / 25 / 30 / 36 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180 / No Gearhead [NH]	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	17 Day(s) or more	30 ～ 300	190 ～ 2000	-	-	-	[B] Oriental Motor / [C] Taiwanese Motor / [R] No Motor / [R] No Motor, Gearhead	-	6 ～ 25	Induction Motor [IM] / No Motor [NM] / Variable Speed Motor [SCM]	-	GG	-	200	-	-	-	-	-	-	-	-	5 / 7.5 / 9 / 12.5 / 15 / 18 / 25 / 30 / 36 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180 / No Gearhead [NH]	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	17 Day(s) or more	30 ～ 300	190 ～ 2000	-	-	-	[B] Oriental Motor / [C] Taiwanese Motor / [R] No Motor / [R] No Motor, Gearhead	-	6 ～ 25	Induction Motor [IM] / No Motor [NM] / Variable Speed Motor [SCM]	-	-	-	200	GSN	-	-	-	-	-	-	-	5 / 7.5 / 9 / 12.5 / 15 / 18 / 25 / 30 / 36 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180 / No Gearhead [NH]	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	17 Day(s) or more	30 ～ 300	190 ～ 2000	-	-	-	[B] Oriental Motor / [C] Taiwanese Motor / [R] No Motor / [R] No Motor, Gearhead	-	6 ～ 25	Induction Motor [IM] / No Motor [NM] / Variable Speed Motor [SCM]	-	-	-	200	-	GW	-	-	-	-	-	-	5 / 7.5 / 9 / 12.5 / 15 / 18 / 25 / 30 / 36 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180 / No Gearhead [NH]	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	17 Day(s) or more	30 ～ 300	190 ～ 2000	-	-	General Purpose, Green [H]	[B] Oriental Motor / [C] Taiwanese Motor / [R] No Motor / [R] No Motor, Gearhead	-	6 ～ 25	Induction Motor [IM] / No Motor [NM] / Variable Speed Motor [SCM]	-	-	-	200	-	-	-	-	-	-	-	-	5 / 7.5 / 9 / 12.5 / 15 / 18 / 25 / 30 / 36 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180 / No Gearhead [NH]	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	17 Day(s) or more	30 ～ 300	190 ～ 2000	-	-	-	[B] Oriental Motor / [C] Taiwanese Motor / [R] No Motor / [R] No Motor, Gearhead	-	6 ～ 25	Induction Motor [IM] / No Motor [NM] / Variable Speed Motor [SCM]	-	-	-	200	-	-	-	HBG	-	-	-	-	5 / 7.5 / 9 / 12.5 / 15 / 18 / 25 / 30 / 36 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180 / No Gearhead [NH]	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	17 Day(s) or more	30 ～ 300	190 ～ 2000	-	-	-	[B] Oriental Motor / [C] Taiwanese Motor / [R] No Motor / [R] No Motor, Gearhead	-	6 ～ 25	Induction Motor [IM] / No Motor [NM] / Variable Speed Motor [SCM]	-	-	-	200	-	-	-	-	-	HBN	-	-	5 / 7.5 / 9 / 12.5 / 15 / 18 / 25 / 30 / 36 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180 / No Gearhead [NH]	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	17 Day(s) or more	30 ～ 300	190 ～ 2000	-	-	-	[B] Oriental Motor / [C] Taiwanese Motor / [R] No Motor / [R] No Motor, Gearhead	-	6 ～ 25	Induction Motor [IM] / No Motor [NM] / Variable Speed Motor [SCM]	-	-	-	200	-	-	-	-	-	-	-	HBW	5 / 7.5 / 9 / 12.5 / 15 / 18 / 25 / 30 / 36 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180 / No Gearhead [NH]	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	17 Day(s) or more	30 ～ 300	190 ～ 2000	-	-	-	[B] Oriental Motor / [C] Taiwanese Motor / [R] No Motor / [R] No Motor, Gearhead	-	6 ～ 25	Induction Motor [IM] / No Motor [NM] / Variable Speed Motor [SCM]	-	-	-	200	-	-	-	-	-	-	-	-	5 / 7.5 / 9 / 12.5 / 15 / 18 / 25 / 30 / 36 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180 / No Gearhead [NH]	HG	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	17 Day(s) or more	30 ～ 300	190 ～ 2000	-	-	-	[B] Oriental Motor / [C] Taiwanese Motor / [R] No Motor / [R] No Motor, Gearhead	-	6 ～ 25	Induction Motor [IM] / No Motor [NM] / Variable Speed Motor [SCM]	-	-	-	200	-	-	-	-	-	-	-	-	5 / 7.5 / 9 / 12.5 / 15 / 18 / 25 / 30 / 36 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180 / No Gearhead [NH]	-	HH	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	17 Day(s) or more	30 ～ 300	190 ～ 2000	-	-	-	[B] Oriental Motor / [C] Taiwanese Motor / [R] No Motor / [R] No Motor, Gearhead	-	6 ～ 25	Induction Motor [IM] / No Motor [NM] / Variable Speed Motor [SCM]	-	-	-	200	-	-	-	-	-	-	-	-	5 / 7.5 / 9 / 12.5 / 15 / 18 / 25 / 30 / 36 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180 / No Gearhead [NH]	-	-	HW	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	17 Day(s) or more	30 ～ 300	190 ～ 2000	-	-	-	[B] Oriental Motor / [C] Taiwanese Motor / [R] No Motor / [R] No Motor, Gearhead	-	6 ～ 25	Induction Motor [IM] / No Motor [NM] / Variable Speed Motor [SCM]	-	-	-	200	-	-	-	-	-	-	-	-	5 / 7.5 / 9 / 12.5 / 15 / 18 / 25 / 30 / 36 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180 / No Gearhead [NH]	-	-	-	HY	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	17 Day(s) or more	30 ～ 300	190 ～ 2000	-	No Belt [J]	-	[B] Oriental Motor / [C] Taiwanese Motor / [R] No Motor / [R] No Motor, Gearhead	-	6 ～ 25	Induction Motor [IM] / No Motor [NM] / Variable Speed Motor [SCM]	-	-	-	200	-	-	-	-	-	-	-	-	5 / 7.5 / 9 / 12.5 / 15 / 18 / 25 / 30 / 36 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180 / No Gearhead [NH]	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	17 Day(s) or more	30 ～ 300	190 ～ 2000	-	-	-	[B] Oriental Motor / [C] Taiwanese Motor / [R] No Motor / [R] No Motor, Gearhead	-	6 ～ 25	Induction Motor [IM] / No Motor [NM] / Variable Speed Motor [SCM]	-	-	-	200	-	-	-	-	-	-	-	-	5 / 7.5 / 9 / 12.5 / 15 / 18 / 25 / 30 / 36 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180 / No Gearhead [NH]	-	-	-	-	KSB	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	17 Day(s) or more	30 ～ 300	190 ～ 2000	-	-	-	[B] Oriental Motor / [C] Taiwanese Motor / [R] No Motor / [R] No Motor, Gearhead	-	6 ～ 25	Induction Motor [IM] / No Motor [NM] / Variable Speed Motor [SCM]	-	-	-	200	-	-	-	-	-	-	-	-	5 / 7.5 / 9 / 12.5 / 15 / 18 / 25 / 30 / 36 / 50 / 60 / 75 / 90 / 100 / 120 / 150 / 180 / No Gearhead [NH]	-	-	-	-	-	KW	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

1
2
3
4
Next >>

Additional work

Additional work details

Applicable conditions

Example of specification

code

Motor position reversed

The motor position can be changed.
Only head drive type can be specified.
<Specifying method>: MK

[ ! ]
For some models, adding MK will also
change related parts.

CVGA-100-1000-25-T100-
IM-25-HB-MK

FYA
FYB

Additional counterbore holes

Head drive

Additional counterbore holes for inserting nuts
are machined into the front and back frames.
<How to specify>: FYA300 FYA300-FYB600

Compatible conveyors	FYA/FYB
CVGA/CVGB	150≦FYA・FYB≦(L-60)

[ ! ] FYA・FYB = Specify in 5mm increments
[ ! ] FYB-FYA≧15
[ ! ] The specified range is as shown in the table on the left.

CVGA-100-1000-25-T100-
IM-25-HB-FYA500

Motor cover window type
head drive

It can be changed to a motor cover with a window.
<How to specify>: CW

[ ! ] Resin plates
can also be purchased separately for maintenance. Click here
for details .

CVGA-100-1000-25-T100-
IM-25-HB-CW

Additional work

Additional work details

Applicable conditions

Example of specification

code

SCB

Bracket for speed controller included

<Speed controller bracket specification drawing>
① Speed controller bracket

A mounting bracket for the speed controller
is included.
<How to order>: SCB

[ ! ] Two bracket mounting screws are included.
[ ! ] Two controller mounting screws (M4x8) are included .
[ ! ] Depending on the conveyor, installation
may not be possible due to space constraints.
[ ! ] The bracket shape varies depending on the conveyor model and motor specifications .

CVGA-100-1000-25-
T100-SCM-25-HB-SCB

ANT□

Post-insertion nuts included

Includes post-assembly nuts for Misumi conveyor frame grooves .
Material: SUS316 equivalent, sintered.
<How to order>: ANT6-Q8-4

[ ! ] Click here for details on post-assembly nuts

Code	Nut quantity Q	M	Accessory (1 piece)	A	B	T
			Set screw
ANT5	4 8 12	3	M4×5	4.9	7	4
(For M5 groove)		4
ANT6		3	M4×6	5.9	8	4.5
(For M6 groove)		4
		5

CVGA-100-1000-25-
T100-SCM-25-HB-
ANT6-Q8-4

TBM

Motor with terminal box
■ Oriental Motor specifications

Change the induction motor to a type with a terminal box .
<How to specify>: TBM

[ ! ] Only Oriental Motor specifications are available.

CVGA-100-1000-25-
T100-SCM-25-HB-TBM

Additional work

Added conveyor stand

Applicable conditions

Example of specification

code

NA□

■Conveyor stand I-type
belt width ≦ 140mm
(adjuster bolt type, stand base + reinforcement material)

*1 D dimension correspondence table

B	30 to 80	90 to 140
D	200	280

[ ! ] B is the belt width

Add a conveyor stand to the conveyor.
<How to specify>:
NA1-H750-PN
WA3-H1200-P400

[ ! ] Bolts and nuts matching the conveyor body groove size are included.
[ ! ] When the length between pulleys (L) is ≥ 1000, we recommend installing two or more stands
.
[ ! ] This specification adds (□-1) units of the part indicated by the dashed line in the drawing to one conveyor stand
.
[ ! ] The delivery time is the same as the standard delivery time for the conveyor.

		①Bracket	②Aluminum frame	③Adjusting bolt	④Aluminum frame
[M]Material	NA	SUS304	Aluminum material	steel	Aluminum material
	WA	steel
[S] Surface Treatment	NA	2B	Anodized aluminum treatment	Trivalent chromate	Anodized aluminum treatment
	WA	Trivalent chromate
		⑤Bracket	⑥Receiving plate	⑦Foot base
[M]Material	NA	Aluminum material	steel	-
	WA			steel
[S] Surface Treatment	NA	Anodized aluminum treatment	Trivalent chromate	-
	WA			Trivalent chromate

■NA□・WA□Installation Dimensions Table

Compatible models	C	X and Y
CVGA/CVGB	twenty one	B+37

*B is the belt width, C is the dimension to the conveying surface
*The mounting location is the dimension assuming a lower groove

Code	Number of stands	Height H	Pitch P
NA	1
WA	2	300～	300～
	3	1300	2000
	4

[ ! ] H and P dimensions can be specified in 10mm increments

[ ! ] If □=1, ④ aluminum frame and
⑤ bracket are not included.
[ ! ] If □=1, the stand will not stand on its own.
[ ! ] If □≧2 and ④ aluminum frame is not required, please order the CSTS and CSTW separately
instead of this additional modification . ( Here , and here ) [ ! ] The stand will be shipped in separate parts . Assembly is required by the customer .

CVGA-100-1000-25-T100-
SCM-25-HB-NA1-H800-PN

WA□

■Conveyor stand H type
belt width ≧ 150 mm
(adjustable bolt type, stand base + reinforcement material)

CVGA-200-1000-25-T100-
SCM-25-HB-WA2-H800-P500

Precautions

Reverse transport is not recommended.
This product is not waterproof.

Product TOP

Basic Information

Drive Module Position	Head Drive	Belt Type	Flat Belt	Meandering Prevention	Pulley crowned for meandering prevention
Tail Roller Dia. D (Tail Transfer Part R)(mm)	30	Drive Roller Dia.(mm)	30	Reverse Switch Option	Not Provided

Configure

200 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Belt Width/Belt Pitch B(mm)
[30-300/1mm Unit(s)]
Clear
Conveyance Length
[190-2000/5]
Clear
BW
- BW
Clear
Belt Specification
- No Belt [J]
Clear
Belt Specification (Standard Belt)
- For Electronic Parts Transfer
- For Electronic Parts Transfer, Black [D]
- For Food Transfer
- For Food Transfer, White [F]
- For Sliding
- For Sliding, Green [G] (Specifications Usage Vertical direction)
- For Sliding, White [S] (Specifications Usage Vertical direction)
- General Purpose
- General Purpose, Green [H]
- General Purpose, White [W]
- Non-adhesive
- Non-adhesive, White [N]
- Oil Resistant
- Oil Resistant, Navy Blue [O]
Clear
Motor Manufacturer Selection
- [B] Oriental Motor
- [C] Taiwanese Motor
- [R] No Motor
- [R] No Motor, Gearhead
Clear
DG
- DG
Clear
Motor Output(W)
6

25
Clear
Motor Specifications
- Induction Motor [IM]
- No Motor [NM]
- Variable Speed Motor [SCM]
Clear
DS
- DS
Clear
GG
- GG
Clear
Motor Voltage (No Motor)
- No Motor [NV]
Clear
Motor Voltage S (3-Phase) * Domestic(V)
200
Clear
GSN
- GSN
Clear
GW
- GW
Clear
Motor Voltage SA (3-Phase) * Universal(V)
200

220

230
Clear
HBG
- HBG
Clear
Motor Voltage T (Single-Phase) * Domestic(V)
100

200
Clear
HBN
- HBN
Clear
Motor Voltage TA (Single-Phase) * Universal(V)
100

110

115

200

220

230
Clear
HBW
- HBW
Clear
Reduction Ratio of Gear Head
5

7.5

9

12.5

15

18

25

30

36

50

60

75

90

100

120

150

180

No Gearhead [NH]
Clear
HG
- HG
Clear
HH
- HH
Clear
HW
- HW
Clear
HY
- HY
Clear
KSB
- KSB
Clear
KW
- KW
Clear
KWN
- KWN
Clear
LG
- LG
Clear
LW
- LW
Clear
NB
- NB
Clear
NBG
- NBG
Clear
NGN
- NGN
Clear
NS
- NS
Clear
NSN
- NSN
Clear
NWN
- NWN
Clear
OG
- OG
Clear
OH
- OH
Clear
ON
- ON
Clear
OW
- OW
Clear
PHB
- PHB
Clear
PHN
- PHN
Clear
PWN
- PWN
Clear
type
- CVGA
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

17 Day(s) or Less
Clear

Specify Alterations

! Be sure to select a motor manufacturer.
! When selecting Alteration for Stands, [NA] or [WA], be sure to specify any values for Stand Height [H] and Stand Width [P], [PN].

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Flat Belt Conveyor SV Series - Head Drive, 2-Groove Frame
MISUMI

Days to Ship : 12 Day(s) or more
Flat Belt Conveyors - Center Drive, 2-Groove Frame (Pulley Dia. 30mm)
MISUMI

Days to Ship : 17 Day(s) or more
Flat Belt Conveyors - Built-in Motor Type - 2-Groove Frame
MISUMI

Days to Ship : 17 Day(s) or more
Flat Belt Conveyor SV Series - Center Drive, 2-Groove Frame
MISUMI

Days to Ship : 17 Day(s) or more
Flat Belt Conveyor SV Series - With Meandering Prevention Crosspiece, Head Drive, 2-Groove Frame (Pulley Dia. 30mm)
MISUMI

Days to Ship : 12 Day(s) or more
Timing Belt Conveyors Narrow Type - Single Track, Head Drive, 2- / 3-Groove Frame
MISUMI

Days to Ship : 17 Day(s) or more
Flat Belt Conveyor High Power Type - Head Drive, 3-Groove Frame
MISUMI

Days to Ship : 12 Day(s) or more
Flat Belt Conveyor Full Belt Type - Head Drive, 2-Groove Frame
MISUMI

Days to Ship : 17 Day(s) or more
Flat Belt Conveyor Full Belt Type - With Meandering Prevention Crosspiece, Head Drive, 2-Groove Frame (Pulley Dia. 30mm)
MISUMI

Days to Ship : 17 Day(s) or more
Flat Belt Conveyor SV Series - With Meandering Prevention Crosspiece, Center Drive, 2-Groove Frame (Pulley Dia. 30mm)
MISUMI

Days to Ship : 17 Day(s) or more
HERMETIC, FII-V, Anti-Corrosive Sealant
SANNOUKOUGYOU

Standard Price : MYR 4,195.63-

Days to Ship : 12 Day(s) or more
Locating Pins - High Hardness Stainless Steel Large Head, Tapered (Tapped)
MISUMI

Days to Ship : 6 Day(s) or more

back next

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations): Tel：(60) 3 7890 6399; 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday); Technical Inquiry

How can we improve?

Flat Belt Conveyors - Head Drive, 2-Groove Frame (Pulley Dia.30mm)

(i)Caution

Dimensions

Standard table

Part Number

Additional work

Precautions

Basic Information

Configure

Specification/Dimensions

Belt Width/Belt Pitch B(mm)

Conveyance Length

BW

Belt Specification

Belt Specification (Standard Belt)

Motor Manufacturer Selection

DG

Motor Output(W)

Motor Specifications

DS

GG

Motor Voltage (No Motor)

Motor Voltage S (3-Phase) * Domestic(V)

GSN

GW

Motor Voltage SA (3-Phase) * Universal(V)

HBG

Motor Voltage T (Single-Phase) * Domestic(V)

HBN

Motor Voltage TA (Single-Phase) * Universal(V)

HBW

Reduction Ratio of Gear Head

HG

HH

HW

HY

KSB

KW

KWN

LG

LW

NB

NBG

NGN

NS

NSN

NWN

OG

OH

ON

OW

PHB

PHN

PWN

type

CAD

Days to Ship

Specify Alterations

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm