[Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Economy Acrylic Plate -Curved / Extruded Type (Part Numbers)

Click this image to zoom it.

Move the mouse over the image to zoom

MISUMI

[Features]·It is cheaper than cast plates · Extruded plate type acrylic plates.

Part Number

Configured Part Number is shown.

Drawing

■Number of Holes Combination Type (With Corner Holes Pre-Drilled)

Acrylic Plates - Extruded: Related Image

1 to 16 × Bolt Nominal Dia. Selection

[!] The pitch between holes is equally divided. The formula for calculating the pitch is ap = (A - 2C) / (a - 1),
bp = (B - 2D)/(b - 1).
[!] When the number of holes per side is 1, the (C) and (D) dimensions are not applied to the holes from the end face. (Asymmetrical machining)
[ ! ] Only burrs generated on the cut part are removed.
To prevent cuts on the corners, please specify additional machining for 4 corners of the same size.

Hole Machining Details

N (Through Hole)

P (Countersink)

Hole Machining Conditions (N・P)

Screw Nominal Dia.	3	4	5	6	8
d	3.5	4.5	5.5	6.5	9
d₁	7.5	9.5	11.5	13.5	19
h	2	2.5	3	3.5	5

Nominal Dia.	b (Min. Value)
3 to 8	2.5

Q (Keyhole)

Hole Machining Condition Q (Keyhole)

* Keyhole Reference Position

[ ! ] Keyhole Machining Condition c ≥ 5
Acrylic Plates - Extruded: Related Image

Keyhole Nominal Dia.	5	6	8
d₁	6	7	9
d₂	14	16	20
h	11	12	15

"Keyhole Position"
(1): The hole position for the specified dimensions D and bp is at the center of d₁ .
(2): When there are 3 or more holes on one side, the pitch is equally divided around d₁.
(3): The center of diameter d₁ for the keyhole is consistent with the value for the center of C(D).

■Number of Holes Combination Table ■Part Number Ordering Codes

Ex. If the number of holes on the A-side is 3 and the number of holes on the B-side is 3, then ACAE33W8.
[!] The formula for calculating the total number of holes is 2a + 2b - 4. When a and b are 1, then a × b.

	Machining Method	Surface texture
4 Sides	Circular sawing
Upper-Lower Surface	Material

[ ! ] The roughness values of the material surface are for reference only.

Type	[ M ] Grade	Color	Light Transmittance	Operating Ambient Temperature
ACAE	Standard	Transparent	93%	－30 to 70°C
ACBAE	Standard	Smoke Brown	34%	－30 to 70°C
ACTAE	Antistatic	Transparent	87%	－30 to 60°C
ACBTAE	Antistatic	Smoke Brown	25%	－30 to 60°C

● T Dimension Tolerance: ±0.5
● Dimension Tolerance of A and B: ±1.0
[ ! ] For A and B dimensions, please specify A≧B.

■Number of Holes Combination Type (No Corner Drilling)

4 to 16 × Bolt Nominal Dia. Selection

[!] The pitch between holes is equally divided. The formula for calculating the pitch is ap = (A - 2C)/ (a - 1),
bp = (B - 2S)/(b - 1).
[ ! ] Only burrs generated on the cut part are removed.
To prevent cuts on the corners, please specify additional machining for 4 corners of the same size.

Hole Machining Details

N (Through Hole)

P (Countersink)

Hole Machining Conditions (N・P)

Screw Nominal Dia.	3	4	5	6	8
d	3.5	4.5	5.5	6.5	9
d₁	7.5	9.5	11.5	13.5	19
h	2	2.5	3	3.5	5

Nominal Dia.	b (Min. Value)
3 to 8	2.5

Q (Keyhole)

Hole Machining Condition Q (Keyhole)

* Keyhole Reference Position

[ ! ] Keyhole Machining Condition c ≥ 5
Acrylic Plates - Extruded: Related Image

Keyhole Nominal Dia.	5	6	8
d₁	6	7	9
d₂	14	16	20
h	11	12	15

"Keyhole Position"
(1): The hole position for the specified dimensions D and bp is at the center of d₁ .
(2): When there are 3 or more holes on one side, the pitch is equally divided around d₁.
(3): The center of the diameter d₁ for the keyhole is consistent with the value for the center of D(R).

■Number of Holes Combination Table ■Part Number Ordering Codes

Ex.) If the number of holes on the A-side is 2 and the number of holes on the B-side is 2, then ACAE22V8.
[ ! ] The formula for calculating the total number of holes is 2a + 2b.

	Machining Method	Surface texture
4 Sides	Circular sawing
Upper-Lower Surface	Material

[ ! ] The roughness values of the material surface are for reference only.

Type	[ M ] Grade	Color	Light Transmittance	Operating Ambient Temperature
ACAE	Standard	Transparent	93%	－30 to 70°C
ACBAE	Standard	Smoke Brown	34%	－30 to 70°C
ACTAE	Antistatic	Transparent	87%	－30 to 60°C
ACBTAE	Antistatic	Smoke Brown	25%	－30 to 60°C

● T Dimension Tolerance: ±0.5
● Dimension Tolerance of A and B: ±1.0
[ ! ] For A and B dimensions, please specify A≧B.

■ Hole Machined Type

2H4H6H8H

[ ! ]A ≥ B

* Keyhole Reference Position

"Keyhole Position"
(1): For 2H, the center of diameter d1 is consistent with G.
(2): For 4H and 6H, the center of G dimension is consistent with the center of B dimension.
(3): For 8H, the center of diameter d1 of the middle keyhole is consistent with the center of B dimension.

Keyhole Details

Hole Machining Details

Q (Keyhole)
Acrylic Plates - Extruded: Related Image

N
(Through Hole)

P
(Countersink)

Keyhole Nominal Dia.	5	6	8
d₁	6	7	9
d₂	14	16	20
h	11	12	15

[ ! ] Please use flat washers to prevent resin damage.
　

Bolt Nominal Dia.	3	4	5	6	8
d	3.5	4.5	5.5	6.5	9
d₁	7.5	9.5	11.5	13.5	19
h	2	2.5	3	3.5	5

[ ! ] Keyhole Machining Conditions
　　　a ≥ 5
　　　b ≥ 5

Type	[M]Grade	Color	Light Transmittance	Operating Ambient Temperature
ACAE	Standard	Transparent	93%	−30 to 70°C
ACBAE	Standard	Brown Smoke	34%	−30 to 70°C
ACTAE	Antistatic	Transparent	87%	−30 to 60°C
ACBTAE	Antistatic	Brown Smoke	25%	−30 to 60°C

■ Accuracy Standards
● T Dimension Tolerance: ±0.5
● Dimension Tolerance of A and B: ±1.0

■ Standard Type

[ ! ]A ≥ B

Type	[M]Grade	Color	Light Transmittance	Operating Ambient Temperature
ACAE	Standard	Transparent	93%	−30 to 70°C
ACBAE	Standard	Brown Smoke	34%	−30 to 70°C
ACTAE	Antistatic	Transparent	87%	−30 to 60°C
ACBTAE	Antistatic	Brown Smoke	25%	−30 to 60°C

■ Accuracy Standards
● T Dimension Tolerance: ±0.5
● Dimension Tolerance of A and B: ±1.0

Specification Table

■With Corner Hole Machining

Part Number	—	A	—	B	—	T	—	C	—	D	—	Screw Nominal Dia.
ACAE33W8	—	300	—	100	—	5	—	C20	—	D10	—	N5

■No Corner Hole Machining

Part Number	—	A	—	B	—	T	—	C	—	D	—	R	—	S	—	Screw Nominal Dia.
ACAE22V8	—	300	—	100	—	5	—	C60	—	D20	—	R20	—	S60	—	N5

■ Hole Machined Type

Part Number	—	A	—	B	—	T	—	F	—	G	—	Screw Nominal Dia.
ACAE6H	—	800	—	400	—	3	—	F250	—	G355	—	N3

■ Standard Type

Part Number	—	A	—	B	—	T
ACAE	—	955	—	825	—	3

■Number of Holes Combination Type (With Corner Holes Pre-Drilled)

Part Number						A	B	T	Hole position indication		Bolt Nominal Dia. Selection
TYPE	combination of holes					1 mm Increments		Selection	C	D	Through Hole	Countersunk Hole					Keyhole
	Side A Number of Holes	Side B Number of Holes	Hole Machining Shape	Number of Holes					1 mm Increments		N	P					Q
ACAE ACBAE	1 2 3 4 5	1 2 3 4 5	W	1 3 5 8 12 16	2 4 6 10 14	300 ～ 1100	300 ～ 900	3	6 ～ 1091	6 ～ 891	3 4 5 6 8	3					5 6 8
								5				3	4	5	6
								8					4	5	6	8
ACTAE ACTBTAE								3				3
								5				3	4	5	6

[!] Dimension C and D Specification Range: Please specify after confirming the processing conditions in the drilling details.
When drilling through holes or countersunk holes, a distance of 2.5 mm or more is required between the holes or between the end faces and holes. A distance of 5 mm or more is required for keyholes.

■Number of Holes Combination Type (No Corner Drilling)

Part Number					A	B	T	Hole position indication				Bolt Nominal Dia. Selection
TYPE	combination of holes				1 mm Increments		Selection	C	D	R	S	Through Hole	Countersunk Hole					Keyhole
	Side A Number of Holes	Side B Number of Holes	Hole Machining Shape	Number of Holes				1 mm Increments				N	P					Q
ACAE ACBAE	1 2 3 4	1 2 3 4	V	4 6 8 10 12 14 16	300 ～ 1100	300 ～ 900	3	6 ～ 1091	6 ～ 447	6 ～ 547	6 ～ 891	3 4 5 6 8	3					5 6 8
							5						3	4	5	6
							8							4	5	6	8
ACTAE ACTBTAE							3						3
							5						3	4	5	6

[!] Dimension C, D, R, and S Specification Range: Please specify after confirming the processing conditions in the drilling details.
When drilling through holes or countersunk holes, a distance of 2.5 mm or more is required between the holes or between the end faces and holes. A distance of 5 mm or more is required for keyholes.
[ ! ] If the number of holes on the A side or on the B side is 3 or more, specify the dimensions as C ≥ R and S ≥ D.

■ Hole Machined Type

Part Number		1 mm Increments		Selection T	1 mm Increments		Bolt Nominal Dia. Selection
Type	Number of Holes	A	B	Selection T	F	G	N (Through Hole)	P (Countersink)					Q (Keyhole)
ACAE ACBAE	2H 4H 6H 8H	300 to 1100	300 to 900	3	9 to 1091 (2H·4H) 9 to 545 (6H·8H)	5 to 895 (2H) 9 to 891 (4H·6H) 9 to 445 (8H)	3 4 5 6 8	3					5 6 8
				5				3	4	5	6
				8					4	5	6	8
ACTAE ACBTAE				3				3
ACTAE ACBTAE				5				3	4	5	6

[!] Dimension F Specification Range – 2H/4H type selection: d (d₁) + 5 ≤ F ≤ A−d (d₁) - 5; 6H/8H type selection: d (d₁) + 5 ≤ F ≤ A/2 − d (d₁)/2 - 2.5 is required.
[!] Dimension G Specification Range – 2H type selection: d (d₁)/2 + 2.5 ≤ G ≤ B - d (d₁)/2 - 2.5; 4H/6H type selection: d (d₁) + 5 ≤ G ≤ B - d (d₁) - 5; 8H type selection: d (d₁) + 5 ≤ G ≤ B/2 - d (d₁)/2 - 2.5 is required. (d for through hole, d₁ for countersink)

■ Standard Type

Part Number	1 mm Increments		Selection T
Type	A	B
ACAE ACBAE	300 to 1100	300 to 900	3 5 8
ACTAE ACBTAE			3 5

Alterations

■Number of Holes Combination Type (With Corner Holes Pre-Drilled)

Part Number	—	A	—	B	—	T	—	C	—	D	—	Screw Nominal Dia.	—	(ACC,ACR)
ACAE33W8	—	200	—	100	—	5	—	C20	—	D10	—	N5	—	ACC

Alterations

Same Dimension Machining (5 mm) for 4 Corners

Code

ACC

ACR

Spec.

All four corners can be cut and
radius machined to the same dimensions (5 mm).
·ACC: Corner 5 mm Cut
·ACR: Corner 5 mm Radius Machining

[ ! ] For the machining conditions of the hole and plate end face, see
Hole Machining Conditions under Hole Machining Details
see hole machining conditions
under hole machining details

Hole Machining Type	b (Min. Value)
Through Hole / Countersunk Hole	2.5
Keyhole	5

■Number of Holes Combination Type (No Corner Drilling)

Part Number	—	A	—	B	—	T	—	C	—	D	—	R	—	S	—	Screw Nominal Dia.	—	(ACC,ACR)
ACAE22V8	—	200	—	100	—	5	—	C60	—	D20	—	R20	—	S60	—	N5	—	ACR

Alterations

Same Dimension Machining (5 mm) for 4 Corners

Code

ACC

ACR

Spec.

All four corners can be cut and
radius machined to the same dimensions (5 mm).
·ACC: Corner 5 mm Cut
·ACR: Corner 5 mm Radius Machining

[ ! ] For the machining conditions of the hole and plate end face, see
Hole Machining Conditions under Hole Machining Details
see hole machining conditions
under hole machining details

Hole Machining Type	b (Min. Value)
Through Hole / Countersunk Hole	2.5
Keyhole	5

■Hole Machined Type / Standard type

Part Number	—	A	—	B	—	T	—	F	—	G	—	Screw Nominal Dia.	—	(XC·YC·CN, etc.)
ACAE4H	—	500	—	400	—	3	—	F300	—	G300	—	N6	—	XC15·YC35

Alterations

Aluminum Extrusion
Blind Joint Notch

Relief at 4 Corners

Corner Cut
Corner Radius Machining

Hole Position from Left

Hole Position from Bottom

Same Dimension Machining for 4 Corners

Code

F□□, E□□, J□□, K□□

CCA·CCB·CCC·CCD
CRA·CRB·CRC·CRD

ACC

ACR

Spec.

Machines relief for blind joints of aluminum extrusions.

[ ! ] Can only be specified for the standard sizes of standard types

Machines relief at 4 corners.
CN = 1 mm Increments
[ ! ]5 ≤ CN ≤ 50
　Ordering Code
CN = 25→CN25

[ ! ] Can only be specified for the standard sizes of standard types.
Only size can be specified

Machines any corner (ABCD) upon request.
5 mm increments
·CCA5 = A Corner 5 mm Cut
·CRB5 = B Corner 5 mm Radius Machining

[ ! ] Can only be specified for the standard sizes of standard types

[ ! ] Cannot be combined with Same Dimension Machining for 4 Corners

XC = 0.5 mm Increments

[ ! ] For the machining conditions of the hole and plate end face, see Hole Machining Conditions under Hole Machining Details
　

[ ! ] Can be specified only for Hole Machined Type (2H to 8H)

YC = 0.5 mm Increments

[ ! ] For the machining conditions of the hole and plate end face, see Hole Machining Conditions under Hole Machining Details
see Hole Machining Conditions under Hole Machining Details

[ ! ] Can be specified only for Hole Machined Type (2H to 8H)

All four corners can be cut and
radius machined to the same dimensions (5 mm).
·ACC: Corner 5 mm Cut
·ACR: Corner 5 mm Radius Machining

[ ! ] For the machining conditions of the hole and plate end face, see
Hole Machining Conditions under Hole Machining Details

Hole Machining Type	b (Min. Value)
Through Hole / Countersunk Hole	2.5
Keyhole	5

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 60; 90

Part Number
ACAE2H-[300-1100/1]-[300-900/1]-[3,5,8]-F[9-1091/1]-G[5-895/1]-N[3,4,5,6,8]
ACAE2H-[300-1100/1]-[300-900/1]-[3,5,8]-F[9-1091/1]-G[5-895/1]-P[3,4,5,6,8]
ACAE2H-[300-1100/1]-[300-900/1]-[3,5,8]-F[9-1091/1]-G[5-895/1]-Q[5,6,8]
ACAE4H-[300-1100/1]-[300-900/1]-[3,5,8]-F[9-1091/1]-G[9-891/1]-N[3,4,5,6,8]
ACAE4H-[300-1100/1]-[300-900/1]-[3,5,8]-F[9-1091/1]-G[9-891/1]-P[3,4,5,6,8]
ACAE4H-[300-1100/1]-[300-900/1]-[3,5,8]-F[9-1091/1]-G[9-891/1]-Q[5,6,8]
ACAE6H-[300-1100/1]-[300-900/1]-[3,5,8]-F[9-545/1]-G[9-891/1]-N[3,4,5,6,8]
ACAE6H-[300-1100/1]-[300-900/1]-[3,5,8]-F[9-545/1]-G[9-891/1]-P[3,4,5,6]
ACAE6H-[300-1100/1]-[300-900/1]-[3,5,8]-F[9-545/1]-G[9-891/1]-Q[5,6,8]
ACAE8H-[300-1100/1]-[300-900/1]-[3,5,8]-F[9-545/1]-G[9-445/1]-N[3,4,5,6,8]
ACAE8H-[300-1100/1]-[300-900/1]-[3,5,8]-F[9-545/1]-G[9-445/1]-P[3,4,5,6,8]
ACAE8H-[300-1100/1]-[300-900/1]-[3,5,8]-F[9-545/1]-G[9-445/1]-Q[5,6,8]
ACAE-[300-1100/1]-[300-900/1]-[3,5,8]
ACBAE2H-[300-1100/1]-[300-900/1]-[3,5,8]-F[9-1091/1]-G[5-895/1]-N[3,4,5,6,8]
ACBAE2H-[300-1100/1]-[300-900/1]-[3,5,8]-F[9-1091/1]-G[5-895/1]-P[3,4,5,6,8]
ACBAE2H-[300-1100/1]-[300-900/1]-[3,5,8]-F[9-1091/1]-G[5-895/1]-Q[5,6,8]
ACBAE4H-[300-1100/1]-[300-900/1]-[3,5,8]-F[9-1091/1]-G[9-891/1]-N[3,4,5,6,8]
ACBAE4H-[300-1100/1]-[300-900/1]-[3,5,8]-F[9-1091/1]-G[9-891/1]-P[3,4,5,6,8]
ACBAE4H-[300-1100/1]-[300-900/1]-[3,5,8]-F[9-1091/1]-G[9-891/1]-Q[5,6,8]
ACBAE6H-[300-1100/1]-[300-900/1]-[3,5,8]-F[9-545/1]-G[9-891/1]-N[3,4,5,6,8]
ACBAE6H-[300-1100/1]-[300-900/1]-[3,5,8]-F[9-545/1]-G[9-891/1]-P[3,4,5,6]
ACBAE6H-[300-1100/1]-[300-900/1]-[3,5,8]-F[9-545/1]-G[9-891/1]-Q[5,6,8]
ACBAE8H-[300-1100/1]-[300-900/1]-[3,5,8]-F[9-545/1]-G[9-445/1]-N[3,4,5,6,8]
ACBAE8H-[300-1100/1]-[300-900/1]-[3,5,8]-F[9-545/1]-G[9-445/1]-P[3,4,5,6,8]
ACBAE8H-[300-1100/1]-[300-900/1]-[3,5,8]-F[9-545/1]-G[9-445/1]-Q[5,6,8]
ACBAE-[300-1100/1]-[300-900/1]-[3,5,8]
ACBTAE2H-[300-1100/1]-[300-900/1]-[3,5]-F[9-1091/1]-G[5-895/1]-N[3,4,5,6,8]
ACBTAE2H-[300-1100/1]-[300-900/1]-[3,5]-F[9-1091/1]-G[5-895/1]-P[3,4,5,6]
ACBTAE2H-[300-1100/1]-[300-900/1]-[3,5]-F[9-1091/1]-G[5-895/1]-Q[5,6,8]
ACBTAE4H-[300-1100/1]-[300-900/1]-[3,5]-F[9-1091/1]-G[9-891/1]-N[3,4,5,6,8]
ACBTAE4H-[300-1100/1]-[300-900/1]-[3,5]-F[9-1091/1]-G[9-891/1]-P[3,4,5,6]
ACBTAE4H-[300-1100/1]-[300-900/1]-[3,5]-F[9-1091/1]-G[9-891/1]-Q[5,6,8]
ACBTAE6H-[300-1100/1]-[300-900/1]-[3,5]-F[9-545/1]-G[9-891/1]-N[3,4,5,6,8]
ACBTAE6H-[300-1100/1]-[300-900/1]-[3,5]-F[9-545/1]-G[9-891/1]-P[3,4,5,6]
ACBTAE6H-[300-1100/1]-[300-900/1]-[3,5]-F[9-545/1]-G[9-891/1]-Q[5,6,8]
ACBTAE8H-[300-1100/1]-[300-900/1]-[3,5]-F[9-545/1]-G[9-445/1]-N[3,4,5,6,8]
ACBTAE8H-[300-1100/1]-[300-900/1]-[3,5]-F[9-545/1]-G[9-445/1]-P[3,4,5,6]
ACBTAE8H-[300-1100/1]-[300-900/1]-[3,5]-F[9-545/1]-G[9-445/1]-Q[5,6,8]
ACBTAE-[300-1100/1]-[300-900/1]-[3,5]
ACTAE2H-[300-1100/1]-[300-900/1]-[3,5]-F[9-1091/1]-G[5-895/1]-N[3,4,5,6,8]
ACTAE2H-[300-1100/1]-[300-900/1]-[3,5]-F[9-1091/1]-G[5-895/1]-P[3,4,5,6]
ACTAE2H-[300-1100/1]-[300-900/1]-[3,5]-F[9-1091/1]-G[5-895/1]-Q[5,6,8]
ACTAE4H-[300-1100/1]-[300-900/1]-[3,5]-F[9-1091/1]-G[9-891/1]-N[3,4,5,6,8]
ACTAE4H-[300-1100/1]-[300-900/1]-[3,5]-F[9-1091/1]-G[9-891/1]-P[3,4,5,6]
ACTAE4H-[300-1100/1]-[300-900/1]-[3,5]-F[9-1091/1]-G[9-891/1]-Q[5,6,8]
ACTAE6H-[300-1100/1]-[300-900/1]-[3,5]-F[9-545/1]-G[9-891/1]-N[3,4,5,6,8]
ACTAE6H-[300-1100/1]-[300-900/1]-[3,5]-F[9-545/1]-G[9-891/1]-P[3,4,5,6]
ACTAE6H-[300-1100/1]-[300-900/1]-[3,5]-F[9-545/1]-G[9-891/1]-Q[5,6,8]
ACTAE8H-[300-1100/1]-[300-900/1]-[3,5]-F[9-545/1]-G[9-445/1]-N[3,4,5,6,8]
ACTAE8H-[300-1100/1]-[300-900/1]-[3,5]-F[9-545/1]-G[9-445/1]-P[3,4,5,6]
ACTAE8H-[300-1100/1]-[300-900/1]-[3,5]-F[9-545/1]-G[9-445/1]-Q[5,6,8]
ACTAE-[300-1100/1]-[300-900/1]-[3,5]

Standard Unit Price	Minimum order quantity	Days to Ship	RoHS	Color	Grade	Hole Machining	Acid	Shape	A (mm)	B (mm)	Countersink Hole Nominal Dia. [P]	F (mm)	G (mm)	Keyhole Nominal Dia. [Q]	T (mm)	Through Hole Nominal Dia. [N]
-	1 Piece(s)	6 Day(s) or more	10	Transparent	Standard	2H	○	Number of Holes Selection Type (With 2H to 8H Holes)	300 ～ 1100	300 ～ 900	-	9 ～ 1091	5 ～ 895	-	3 ～ 8	3 ～ 8
-	1 Piece(s)	6 Day(s) or more	10	Transparent	Standard	2H	○	Number of Holes Selection Type (With 2H to 8H Holes)	300 ～ 1100	300 ～ 900	3 ～ 8	9 ～ 1091	5 ～ 895	-	3 ～ 8	-
-	1 Piece(s)	6 Day(s) or more	10	Transparent	Standard	2H	○	Number of Holes Selection Type (With 2H to 8H Holes)	300 ～ 1100	300 ～ 900	-	9 ～ 1091	5 ～ 895	5 ～ 8	3 ～ 8	-
-	1 Piece(s)	6 Day(s) or more	10	Transparent	Standard	4H	○	Number of Holes Selection Type (With 2H to 8H Holes)	300 ～ 1100	300 ～ 900	-	9 ～ 1091	9 ～ 891	-	3 ～ 8	3 ～ 8
-	1 Piece(s)	6 Day(s) or more	10	Transparent	Standard	4H	○	Number of Holes Selection Type (With 2H to 8H Holes)	300 ～ 1100	300 ～ 900	3 ～ 8	9 ～ 1091	9 ～ 891	-	3 ～ 8	-
-	1 Piece(s)	6 Day(s) or more	10	Transparent	Standard	4H	○	Number of Holes Selection Type (With 2H to 8H Holes)	300 ～ 1100	300 ～ 900	-	9 ～ 1091	9 ～ 891	5 ～ 8	3 ～ 8	-
-	1 Piece(s)	6 Day(s) or more	10	Transparent	Standard	6H	○	Number of Holes Selection Type (With 2H to 8H Holes)	300 ～ 1100	300 ～ 900	-	9 ～ 545	9 ～ 891	-	3 ～ 8	3 ～ 8
-	1 Piece(s)	6 Day(s) or more	10	Transparent	Standard	6H	○	Number of Holes Selection Type (With 2H to 8H Holes)	300 ～ 1100	300 ～ 900	3 ～ 6	9 ～ 545	9 ～ 891	-	3 ～ 8	-
-	1 Piece(s)	6 Day(s) or more	10	Transparent	Standard	6H	○	Number of Holes Selection Type (With 2H to 8H Holes)	300 ～ 1100	300 ～ 900	-	9 ～ 545	9 ～ 891	5 ～ 8	3 ～ 8	-
-	1 Piece(s)	6 Day(s) or more	10	Transparent	Standard	8H	○	Number of Holes Selection Type (With 2H to 8H Holes)	300 ～ 1100	300 ～ 900	-	9 ～ 545	9 ～ 445	-	3 ～ 8	3 ～ 8
-	1 Piece(s)	6 Day(s) or more	10	Transparent	Standard	8H	○	Number of Holes Selection Type (With 2H to 8H Holes)	300 ～ 1100	300 ～ 900	3 ～ 8	9 ～ 545	9 ～ 445	-	3 ～ 8	-
-	1 Piece(s)	6 Day(s) or more	10	Transparent	Standard	8H	○	Number of Holes Selection Type (With 2H to 8H Holes)	300 ～ 1100	300 ～ 900	-	9 ～ 545	9 ～ 445	5 ～ 8	3 ～ 8	-
-	1 Piece(s)	4 Day(s) or more	10	Transparent	Standard	No Drilling Alteration	○	No Hole Machining (Standard Type)	300 ～ 1100	300 ～ 900	-	-	-	-	3 ～ 8	-
-	1 Piece(s)	6 Day(s) or more	10	Smoke Brown	Standard	2H	○	Number of Holes Selection Type (With 2H to 8H Holes)	300 ～ 1100	300 ～ 900	-	9 ～ 1091	5 ～ 895	-	3 ～ 8	3 ～ 8
-	1 Piece(s)	6 Day(s) or more	10	Smoke Brown	Standard	2H	○	Number of Holes Selection Type (With 2H to 8H Holes)	300 ～ 1100	300 ～ 900	3 ～ 8	9 ～ 1091	5 ～ 895	-	3 ～ 8	-
-	1 Piece(s)	6 Day(s) or more	10	Smoke Brown	Standard	2H	○	Number of Holes Selection Type (With 2H to 8H Holes)	300 ～ 1100	300 ～ 900	-	9 ～ 1091	5 ～ 895	5 ～ 8	3 ～ 8	-
-	1 Piece(s)	6 Day(s) or more	10	Smoke Brown	Standard	4H	○	Number of Holes Selection Type (With 2H to 8H Holes)	300 ～ 1100	300 ～ 900	-	9 ～ 1091	9 ～ 891	-	3 ～ 8	3 ～ 8
-	1 Piece(s)	6 Day(s) or more	10	Smoke Brown	Standard	4H	○	Number of Holes Selection Type (With 2H to 8H Holes)	300 ～ 1100	300 ～ 900	3 ～ 8	9 ～ 1091	9 ～ 891	-	3 ～ 8	-
-	1 Piece(s)	6 Day(s) or more	10	Smoke Brown	Standard	4H	○	Number of Holes Selection Type (With 2H to 8H Holes)	300 ～ 1100	300 ～ 900	-	9 ～ 1091	9 ～ 891	5 ～ 8	3 ～ 8	-
-	1 Piece(s)	6 Day(s) or more	10	Smoke Brown	Standard	6H	○	Number of Holes Selection Type (With 2H to 8H Holes)	300 ～ 1100	300 ～ 900	-	9 ～ 545	9 ～ 891	-	3 ～ 8	3 ～ 8
-	1 Piece(s)	6 Day(s) or more	10	Smoke Brown	Standard	6H	○	Number of Holes Selection Type (With 2H to 8H Holes)	300 ～ 1100	300 ～ 900	3 ～ 6	9 ～ 545	9 ～ 891	-	3 ～ 8	-
-	1 Piece(s)	6 Day(s) or more	10	Smoke Brown	Standard	6H	○	Number of Holes Selection Type (With 2H to 8H Holes)	300 ～ 1100	300 ～ 900	-	9 ～ 545	9 ～ 891	5 ～ 8	3 ～ 8	-
-	1 Piece(s)	6 Day(s) or more	10	Smoke Brown	Standard	8H	○	Number of Holes Selection Type (With 2H to 8H Holes)	300 ～ 1100	300 ～ 900	-	9 ～ 545	9 ～ 445	-	3 ～ 8	3 ～ 8
-	1 Piece(s)	6 Day(s) or more	10	Smoke Brown	Standard	8H	○	Number of Holes Selection Type (With 2H to 8H Holes)	300 ～ 1100	300 ～ 900	3 ～ 8	9 ～ 545	9 ～ 445	-	3 ～ 8	-
-	1 Piece(s)	6 Day(s) or more	10	Smoke Brown	Standard	8H	○	Number of Holes Selection Type (With 2H to 8H Holes)	300 ～ 1100	300 ～ 900	-	9 ～ 545	9 ～ 445	5 ～ 8	3 ～ 8	-
-	1 Piece(s)	4 Day(s) or more	10	Smoke Brown	Standard	No Drilling Alteration	○	No Hole Machining (Standard Type)	300 ～ 1100	300 ～ 900	-	-	-	-	3 ～ 8	-
-	1 Piece(s)	8 Day(s) or more	10	Smoke Brown	Antistatic	2H	×～△	Number of Holes Selection Type (With 2H to 8H Holes)	300 ～ 1100	300 ～ 900	-	9 ～ 1091	5 ～ 895	-	3 ～ 5	3 ～ 8
-	1 Piece(s)	8 Day(s) or more	10	Smoke Brown	Antistatic	2H	×～△	Number of Holes Selection Type (With 2H to 8H Holes)	300 ～ 1100	300 ～ 900	3 ～ 6	9 ～ 1091	5 ～ 895	-	3 ～ 5	-
-	1 Piece(s)	8 Day(s) or more	10	Smoke Brown	Antistatic	2H	×～△	Number of Holes Selection Type (With 2H to 8H Holes)	300 ～ 1100	300 ～ 900	-	9 ～ 1091	5 ～ 895	5 ～ 8	3 ～ 5	-
-	1 Piece(s)	8 Day(s) or more	10	Smoke Brown	Antistatic	4H	×～△	Number of Holes Selection Type (With 2H to 8H Holes)	300 ～ 1100	300 ～ 900	-	9 ～ 1091	9 ～ 891	-	3 ～ 5	3 ～ 8
-	1 Piece(s)	8 Day(s) or more	10	Smoke Brown	Antistatic	4H	×～△	Number of Holes Selection Type (With 2H to 8H Holes)	300 ～ 1100	300 ～ 900	3 ～ 6	9 ～ 1091	9 ～ 891	-	3 ～ 5	-
-	1 Piece(s)	8 Day(s) or more	10	Smoke Brown	Antistatic	4H	×～△	Number of Holes Selection Type (With 2H to 8H Holes)	300 ～ 1100	300 ～ 900	-	9 ～ 1091	9 ～ 891	5 ～ 8	3 ～ 5	-
-	1 Piece(s)	8 Day(s) or more	10	Smoke Brown	Antistatic	6H	×～△	Number of Holes Selection Type (With 2H to 8H Holes)	300 ～ 1100	300 ～ 900	-	9 ～ 545	9 ～ 891	-	3 ～ 5	3 ～ 8
-	1 Piece(s)	8 Day(s) or more	10	Smoke Brown	Antistatic	6H	×～△	Number of Holes Selection Type (With 2H to 8H Holes)	300 ～ 1100	300 ～ 900	3 ～ 6	9 ～ 545	9 ～ 891	-	3 ～ 5	-
-	1 Piece(s)	8 Day(s) or more	10	Smoke Brown	Antistatic	6H	×～△	Number of Holes Selection Type (With 2H to 8H Holes)	300 ～ 1100	300 ～ 900	-	9 ～ 545	9 ～ 891	5 ～ 8	3 ～ 5	-
-	1 Piece(s)	8 Day(s) or more	10	Smoke Brown	Antistatic	8H	×～△	Number of Holes Selection Type (With 2H to 8H Holes)	300 ～ 1100	300 ～ 900	-	9 ～ 545	9 ～ 445	-	3 ～ 5	3 ～ 8
-	1 Piece(s)	8 Day(s) or more	10	Smoke Brown	Antistatic	8H	×～△	Number of Holes Selection Type (With 2H to 8H Holes)	300 ～ 1100	300 ～ 900	3 ～ 6	9 ～ 545	9 ～ 445	-	3 ～ 5	-
-	1 Piece(s)	8 Day(s) or more	10	Smoke Brown	Antistatic	8H	×～△	Number of Holes Selection Type (With 2H to 8H Holes)	300 ～ 1100	300 ～ 900	-	9 ～ 545	9 ～ 445	5 ～ 8	3 ～ 5	-
-	1 Piece(s)	6 Day(s) or more	10	Smoke Brown	Antistatic	No Drilling Alteration	×～△	No Hole Machining (Standard Type)	300 ～ 1100	300 ～ 900	-	-	-	-	3 ～ 5	-
-	1 Piece(s)	8 Day(s) or more	10	Transparent	Antistatic	2H	×～△	Number of Holes Selection Type (With 2H to 8H Holes)	300 ～ 1100	300 ～ 900	-	9 ～ 1091	5 ～ 895	-	3 ～ 5	3 ～ 8
-	1 Piece(s)	8 Day(s) or more	10	Transparent	Antistatic	2H	×～△	Number of Holes Selection Type (With 2H to 8H Holes)	300 ～ 1100	300 ～ 900	3 ～ 6	9 ～ 1091	5 ～ 895	-	3 ～ 5	-
-	1 Piece(s)	8 Day(s) or more	10	Transparent	Antistatic	2H	×～△	Number of Holes Selection Type (With 2H to 8H Holes)	300 ～ 1100	300 ～ 900	-	9 ～ 1091	5 ～ 895	5 ～ 8	3 ～ 5	-
-	1 Piece(s)	8 Day(s) or more	10	Transparent	Antistatic	4H	×～△	Number of Holes Selection Type (With 2H to 8H Holes)	300 ～ 1100	300 ～ 900	-	9 ～ 1091	9 ～ 891	-	3 ～ 5	3 ～ 8
-	1 Piece(s)	8 Day(s) or more	10	Transparent	Antistatic	4H	×～△	Number of Holes Selection Type (With 2H to 8H Holes)	300 ～ 1100	300 ～ 900	3 ～ 6	9 ～ 1091	9 ～ 891	-	3 ～ 5	-
-	1 Piece(s)	8 Day(s) or more	10	Transparent	Antistatic	4H	×～△	Number of Holes Selection Type (With 2H to 8H Holes)	300 ～ 1100	300 ～ 900	-	9 ～ 1091	9 ～ 891	5 ～ 8	3 ～ 5	-
-	1 Piece(s)	8 Day(s) or more	10	Transparent	Antistatic	6H	×～△	Number of Holes Selection Type (With 2H to 8H Holes)	300 ～ 1100	300 ～ 900	-	9 ～ 545	9 ～ 891	-	3 ～ 5	3 ～ 8
-	1 Piece(s)	8 Day(s) or more	10	Transparent	Antistatic	6H	×～△	Number of Holes Selection Type (With 2H to 8H Holes)	300 ～ 1100	300 ～ 900	3 ～ 6	9 ～ 545	9 ～ 891	-	3 ～ 5	-
-	1 Piece(s)	8 Day(s) or more	10	Transparent	Antistatic	6H	×～△	Number of Holes Selection Type (With 2H to 8H Holes)	300 ～ 1100	300 ～ 900	-	9 ～ 545	9 ～ 891	5 ～ 8	3 ～ 5	-
-	1 Piece(s)	8 Day(s) or more	10	Transparent	Antistatic	8H	×～△	Number of Holes Selection Type (With 2H to 8H Holes)	300 ～ 1100	300 ～ 900	-	9 ～ 545	9 ～ 445	-	3 ～ 5	3 ～ 8
-	1 Piece(s)	8 Day(s) or more	10	Transparent	Antistatic	8H	×～△	Number of Holes Selection Type (With 2H to 8H Holes)	300 ～ 1100	300 ～ 900	3 ～ 6	9 ～ 545	9 ～ 445	-	3 ～ 5	-
-	1 Piece(s)	8 Day(s) or more	10	Transparent	Antistatic	8H	×～△	Number of Holes Selection Type (With 2H to 8H Holes)	300 ～ 1100	300 ～ 900	-	9 ～ 545	9 ～ 445	5 ～ 8	3 ～ 5	-
-	1 Piece(s)	6 Day(s) or more	10	Transparent	Antistatic	No Drilling Alteration	×～△	No Hole Machining (Standard Type)	300 ～ 1100	300 ～ 900	-	-	-	-	3 ～ 5	-

Product TOP

Basic Information

Material	Acrylic	Continuous Operating Temperature (High Temperature)(℃)	55 to 70	Continuous Operating Temperature (Low Temperature)(℃)	-30
Volume Resistivity Value(Ω･cm)	＞10^15	Oil	○	Alkali	○
A/B Dimension Tolerance	±1.0

Configure

52 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Color
Transparent

Smoke Brown
Clear
Grade
- Standard
- Antistatic
Clear
Hole Machining
No Drilling Alteration

2H

4H

6H

8H
Clear
Acid
- ○
- ×～△
Clear
Shape
- No Hole Machining (Standard Type)
- Number of Holes Selection Type (With 2H to 8H Holes)
Clear
A(mm)
[300-1100/1mm Unit(s)]
Clear
B(mm)
[300-900/1mm Unit(s)]
Clear
Countersink Hole Nominal Dia. [P]
3

4

5

6

8
Clear
F(mm)
[9-1091/1mm Unit(s)]
Clear
G(mm)
[5-895/1mm Unit(s)]
Clear
Keyhole Nominal Dia. [Q]
5

6

8
Clear
T(mm)
3

5

8
Clear
Through Hole Nominal Dia. [N]
3

4

5

6

8
Clear
type
- ACAE
- ACAE□H
- ACBAE
- ACBAE□H
- ACBTAE
- ACBTAE□H
- ACTAE
- ACTAE□H
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

4 Day(s) or Less

6 Day(s) or Less

8 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Additional Products in this Category

Complementary Products

Hex Socket Head Cap - Screws Configurable Length
MISUMI Days to Ship : 5 Day(s) or more
Sponge Washers - Temperature limit for seals is 80°C.
MISUMI Days to Ship : 4 Day(s) or more
Urethane / Rubber Baked Bumpers - Threaded Type
MISUMI Days to Ship : 1 Day(s) or more

Customers Who Viewed This Item Also Viewed

Acrylic Plate -Cast Type -Custom Size
MISUMI

Days to Ship : 6 Day(s) or more
Plastic Sheets -Thin Type -0.5 to 2.0 mm
MISUMI

Days to Ship : 6 Day(s) or more
Polycarbonate Plates -High Impact Resistance
MISUMI

Days to Ship : 10 Day(s) or more
PET Plates
MISUMI

Days to Ship : 4 Day(s) or more
Plastic Cover Plates - U-Shaped
MISUMI

Days to Ship : 5 Day(s) or more
Acrylic Cases
MISUMI

Days to Ship : 8 Day(s) or more
Sumi-Holiday (Acrylic Shee, Transparency)
HIKARI

Standard Price : MYR 20.97-

Days to Ship : 8 Day(s) or more
Antistatic PVC Plates -Chemical Resistant & Flame Retardant
MISUMI

Days to Ship : 6 Day(s) or more
Acrylic Block Flat Sheet
HIKARI

Standard Price : MYR 9.03-

Days to Ship : 8 Day(s) or more
Transparent Plastic Circular Plates
MISUMI

Days to Ship : 6 Day(s) or more
Extra Thin Plastic Sheets -Polyacetal / Fluororesin / Polycarbonate
MISUMI

Days to Ship : 6 Day(s) or more
Acrysunday Acrylic Plate -Transparent / Semi-Transparent / Opaque
ACRYSUNDAY

Days to Ship : 13 Day(s) or more

back next

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations): Tel：(60) 3 7890 6399; 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday); Technical Inquiry

How can we improve?

Economy Acrylic Plate -Curved / Extruded Type (Part Numbers)

Drawing

Specification Table

Alterations

Part Number

Basic Information

Configure

Specification/Dimensions

Color

Grade

Hole Machining

Acid

Shape

A(mm)

B(mm)

Countersink Hole Nominal Dia. [P]

F(mm)

G(mm)

Keyhole Nominal Dia. [Q]

T(mm)

Through Hole Nominal Dia. [N]

type

CAD

Days to Ship

Specify Alterations

Additional Products in this Category

Complementary Products

Customers Who Viewed This Item Also Viewed

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm