[Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Constant Load Flat Coil Spring (CFS1.0)

Click this image to zoom it.

Move the mouse over the image to zoom

Volume Discount

[Features]·This is a long plate spring bent at a constant curvature, and the return force (load) generated when it is stretched in a straight line is constant regardless of the stroke. ·Once the maximum load is reached, the load remains constant, no matter how much the stroke is extended. (Maximum output is reached only after the drum has rotated approx. 1/2.)

(i)Caution

Please check the content on our website as the PDF does not contain the most up-to-date information.

Part Number

Configured Part Number is shown.

CFS1.0

Drawing/Specifications
3D Preview
Part Numbers
More Information
Catalog
Technical Information

CFS (Constant Force Springs)
CFSB (Brackets for Constant Force Springs)

[ M ]Material
Main Body	Drum
SUS301EH	Polypropylene

[ M ]Material		[ S ]Surface Treatment	[ A ]Accessory
Main Body	Shaft	Shaft	[ A ]Accessory
SUS430	SWCH Equivalent	Nickel Plating	Retaining Ring-C Type (SUS304)

[ ! ]Material of the Drums: CFS0.1, CFS0.2 and CFS5.2 are polyethylene, CFS3.5 is ABS.

Specifications

Part Number

CFS2.4
CFSB2.4

Part Number		Max. Stroke	Durability Times	Spring Plate Thickness	Accessory Plate Thickness	D	D₁	V	ℓ	L	W	d	Y
Type	Load (kgf)	Max. Stroke	Durability Times	Spring Plate Thickness	Accessory Plate Thickness	D	D₁	V	ℓ	L	W	d	Y
CFS	0.1	500	50,000	0.1	1.0	26	8.2	5.2	17	18	10	3.2	5
	0.2	500	35,000	0.13		26	8.2	5.2	17	18	10	3.2	5
	0.4	1,000	37,000	0.13		34	13	10.2	25.6	27.6	20	4.5	8
	0.6	1,000	25,000	0.15		34	13		25.6	27.6	20
	0.8	1,500	25,000	0.15		34	14		30.6	32.6	25
	1.0	1,000	19,000	0.2		38			26.2	27.6	20
	1.2	1,500	34,000			44			40.6	42.6	35
	1.4	1,000	9,000			34	13		25.6	27.6	20
	1.8	1,500	9,000			34	14		30.6	32.6	25
	2.0	1,000	6,000	0.25		38			26.2	27.6	20
	2.2		8,000	0.3		44			25.6	27.6	20
	2.4		6,000	0.25		38			30.6	32.6	25
	2.6		9,000	0.3		44			30.6	32.6	25
	2.9		20,000		2.0	54	16		46	49	40	6.5
	3.2		8,000		1.0	44	14		35.6	37.6	30	4.5
	3.5		21,000		2.0	54	16		56	58	50	6.5
	3.9		8,000		1.0	44	14		40.6	42.6	35	4.5
	4.7		9,000		2.0	44	14		50.6	52.6	45	6.5
	5.2	1,500	6,000	0.45	1.0	60	16		37	40	30	4.5
	5.7	1,000	8,000	0.3	2.0	44	14		55.6	57.6	50	6.5

[ ! ]All load tolerances are from 0 to +15%.

Part Number		t	A	B	P₁	P₂	X	d	D	ℓ₁	ℓ₂	L	Applicable Constant Force Spring
Type	No.	t	A	B	P₁	P₂	X	d	D	ℓ₁	ℓ₂	L	Applicable Constant Force Spring
CFSB	0.1	1.5	45	22.5	35	12.5	5	4.5	5	(24.9)	20.5	68.5	CFS0.1	CFS0.2
	0.4	2	55	27.5	43	15.5	6	5.5	10	(35)	30.4	89.4	CFS0.4	CFS0.6	CFS1.4
	0.8		55	27.5	43	15.5				(40)	35.4	94.4	CFS0.8	CFS1.8
	1.0		60	30	48	18				(35)	30.4	94.4	CFS1.0	CFS2.0
	1.2		65	32.5	53	20.5				(50)	45.4	114.4	CFS1.2	CFS3.9
	2.2		65	32.5	53	20.5				(35)	30.4	99.4	CFS2.2
	2.4		60	30	48	18				(40)	35.4	99.4	CFS2.4
	2.6		65	32.5	53	20.5				(40)	35.4	104.4	CFS2.6
	2.9		75	37.5	63	25.5				(56)	51.4	130.4	CFS2.9
	3.2		65	32.5	53	20.5				(45)	40.4	109.4	CFS3.2
	3.5		75	37.5	63	25.5				(65.4)	60.8	139.8	CFS3.5
	4.7		65	32.5	53	20.5				(60)	55.4	124.4	CFS4.7
	5.2	2.5	85	42.5	71	28.5	7	6.5		(47.4)	42.3	132.3	CFS5.2
	5.7	2	65	32.5	53	20.5	6	5.5		(65)	60.4	129.4	CFS5.7

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 45; 60

Part Number
CFS1.0

Part Number	Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	RoHS	Types	Load (kgf)	Mounting Bracket	Applicable Constant Load Springs	Material	Surface Treatment
	MYR 83.50	1 Piece(s)	Available	2 Day(s)	10	Constant Force Springs	1.0	CFSB1.0	-	Body: SUS301EH / Drum: Polypropylene	NA

Basic Information

[Features]

A long strip of material that is wound into a role.
When the strip is extended, the inherent stress resists the loading force at a constant rate.
Once it reaches the maximum load, the resistance is constant regardless of the stroke.
(The drums reach the max. output only after approximately half a rotation.)

Specifications/Overview

[How to Use]

1. The side on which a shaft goes through the drum is regarded as one end, and the accessory plate side as the other end.
Mount with screws using mounting holes of the accessory plate.

2. Can be used in either way of fixing the body and pulling out the accessory plate (Fig. 1) or fixing the accessory plate and
pulling out the body (Fig. 2).

[Cautions on Use]

1. A spring is coiled around a drum, but the inner edge of the spring is not fixed to the drum.
Do not pull out the stroke beyond the specified length: the spring may come off of the drum.

2. If a suitable load constant force spring can not be found, select a value one step higher and
adjust using a counterweight on the mating load.

3. Durability is as shown in specification table. A set of extension and contraction is counted as one cycle. If durability expectancy is exceeded, load capacity may decrease and cracks may appear partly on the spring surface. Continuous use under such condition is dangerous. If used in pairs, both will reach the end of their service life at the same time. Please replace both of them at the same time.
The above durability is for reference only. Actual durability may differ from the given value depending on factors such as the environment and conditions of use.

4. After prestressing of springs (5 ~ 10 sets of extension and contraction over the entire stroke) the load will be stable. Load capacity may be higher before prestressing.

[Cautions on Installation]
1. Make sure the spring doesn't contact other structures.
2. Spring draw direction should be perpendicular to the shaft axis.
3. Make sure a spring doesn't contact the accessory plate when retracting.
4. Set the spring so that it can be pulled out horizontally at any time in order to avoid deflection (bending).
5. If drum and shaft do not rotate smoothly, the spring will deteriorate due to excessive force.

6. When using brackets, orient them in the position as shown in Fig. 3. Orienting them in the position as shown in Fig. 4 may cause the spring to come into contact with the installation surface of the brackets. This may allow foreign objects such as dust inside, which can cause the spring to deteriorate.

7. When the spring's direction of movement is changed n times by idlers, etc., the service life is approximately 1/(n+1) times lower because the spring deforms more often. In particular, when making a sharp change in direction or under conditions where repeated stress is concentrated on the same part of the spring, the life may become even shorter.

8. When the direction of the spring is changed with an idler, etc., design as shown in Figure 5.

Spring outer diameter ≤ Idler outer diameter
(Fig. 5)

9. When the direction of the spring is changed with an idler, etc., using it as shown in Figure 6 or Figure 7 may lead to early breakage.

Spring outer diameter > Idler outer diameter
(Fig. 6)

Idler direction is opposite to spring winding direction
(Fig. 7)

Product TOP

Please check the type/dimensions/specifications of the part CFS1.0 in the Constant Load Flat Coil Spring series.

Configure

1 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Applicable Constant Load Springs
CFS0.1, CFS0.2

CFS0.4, CFS0.6, CFS1.4

CFS0.8, CFS1.8

CFS1.0, CFS2.0

CFS1.2, CFS3.9

CFS2.2

CFS2.4

CFS2.6

CFS2.9

CFS3.2

CFS3.5

CFS4.7

CFS5.2

CFS5.7
Clear
type
- CFS
- CFSB
Clear
Types
- Constant Force Springs
- Bracket for Mounting
Clear
Load(kgf)
0.1

0.2

0.4

0.6

0.8

1.0

1.2

1.4

1.8

2.0

2.2

2.4

2.6

2.9

3.2

3.5

3.9

4.7

5.2

5.7
Clear
Mounting Bracket
CFSB0.1

CFSB0.4

CFSB0.8

CFSB1.0

CFSB1.2

CFSB2.2

CFSB2.4

CFSB2.6

CFSB2.9

CFSB3.2

CFSB3.5

CFSB4.7

CFSB5.2

CFSB5.7
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

1 Day(s) or Less

2 Day(s) or Less

4 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Products like this...

Part Number
CFS0.4
CFS0.6
CFS0.8
CFS1.2
CFS1.4
CFS1.8

Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	RoHS	Types	Load (kgf)	Mounting Bracket	Applicable Constant Load Springs	Material	Surface Treatment
MYR 80.55	1 Piece(s)	Available	1 Day(s)	10	Constant Force Springs	0.4	CFSB0.4	-	Body: SUS301EH / Drum: Polypropylene	NA
MYR 81.53	1 Piece(s)	Available	2 Day(s)	10	Constant Force Springs	0.6	CFSB0.4	-	Body: SUS301EH / Drum: Polypropylene	NA
MYR 88.47	1 Piece(s)	Available	2 Day(s)	10	Constant Force Springs	0.8	CFSB0.8	-	Body: SUS301EH / Drum: Polypropylene	NA
MYR 99.70	1 Piece(s)	Available	4 Day(s) or more	10	Constant Force Springs	1.2	CFSB1.2	-	Body: SUS301EH / Drum: Polypropylene	NA
MYR 83.50	1 Piece(s)	Available	4 Day(s) or more	10	Constant Force Springs	1.4	CFSB0.4	-	Body: SUS301EH / Drum: Polypropylene	NA
MYR 94.04	1 Piece(s)	Available	1 Day(s)	10	Constant Force Springs	1.8	CFSB0.8	-	Body: SUS301EH / Drum: Polypropylene	NA

Additional Products in this Category

Complementary Products

Hex Socket Head Cap - Screws Configurable Length
MISUMI Days to Ship : 5 Day(s) or more
Socket Head Cap Screws -with Large Washer Set
MISUMI Days to Ship : 5 Day(s) or more
Hex Nuts
MISUMI Standard Price : MYR 1.13- Days to Ship : 1 Day(s) or more
Quick-Lock Nuts/Thumb
MISUMI Standard Price : MYR 37.01- Days to Ship : 4 Day(s) or more
Taper Washer
MISUMI Standard Price : MYR 9.06- Days to Ship : 4 Day(s) or more

Customers Who Viewed This Item Also Viewed

Constant Force Springs, CR Type
ACCURATE

Standard Price : MYR 314.19-

Days to Ship : 4 Day(s) or more
Flat Springs
MISUMI

Days to Ship : 6 Day(s) or more
Torsion Springs
MISUMI

Days to Ship : 11 Day(s) or more
Ultra Spring Extension Coil Spring
ACCURATE

Standard Price : MYR 3.99-

Days to Ship : 2 Day(s) or more
Hook Insertion for Springs
MISUMI

Days to Ship : 8 Day(s) or more
Tension Springs/Long
MISUMI

Standard Price : MYR 67.98-

Days to Ship : 1 Day(s) or more
Battery Contact Spring Plates
ACCURATE

Standard Price : MYR 7.98-

Days to Ship : 4 Day(s) or more
Washers for Coil Springs - Tapped
MISUMI

Days to Ship : 6 Day(s) or more
Torsion Spring
ACCURATE

Standard Price : MYR 6.43-

Days to Ship : 1 Day(s) or more

back next

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations): Tel：(60) 3 7890 6399; 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday); Technical Inquiry

How can we improve?

Constant Load Flat Coil Spring (CFS1.0)

(i)Caution

Specifications

Part Number

Basic Information

Specifications/Overview

Configure

Specification/Dimensions

Applicable Constant Load Springs

type

Types

Load(kgf)

Mounting Bracket

CAD

Days to Ship

Specify Alterations

Products like this...

Additional Products in this Category

Complementary Products

Customers Who Viewed This Item Also Viewed

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm