(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Webcode Seach | Series
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

Loading

  • [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
  • [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

  • How can we improve?

    How can we improve?

    Comments
    Name (Optional)
    E-mail Address (Optional)
    Tel (Optional)

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Customer Privacy Policy

    Thank you for your cooperation.

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Please use the inquiry form.

    Customer Privacy Policy

Configurable Long Aluminum Panel Bracket (Part Numbers)

Configurable Long Aluminum Panel Bracket

Click this image to zoom it.

Move the mouse over the image to zoom

MISUMI

MISUMI

You can fill the gap between the frame and the panel. It can also be used for reinforcement purposes.

PDFP.2-786-2014

Part Number

Configured Part Number is shown.

Dimensional Drawing of Panel Mounts

HCBAL6
HCBAL6S
HCBAL8
Panel Mounts

* When alteration CTW45 is specified, the M5 mounting hole position will be 20 mm from the end face.

[M] Material　A6063S−T5
[S] Surface Treatment : Anodized

Specification Table of Panel Mounts

Model−L
HCBAL6 − 1000
・The price list below is currentas of April 2011.
・To check the latest price, please click the "Check Price" button after confirming the model number.
ModelL
Specified in 1mm increments		Frame side and
Difference from mounting surface		SApplicable Panel Mounts
TypeNo.boltQuantitynutQuantity
HCBAL 6 50～2000 510CBM6－122HNTT6-62
6S 312
8 *5 ＊2 15CBM6－15HNTT8－6
[ ! ] 8 ＊ Can be used with 8-45 [ ! ] 5 ＊2 is for 40mm square aluminum frame

Additional Processing of Panel Mounts

Model−L−(CTW45・MH)
HCBAL6 − 500 − CTW45
HCBAL8 − 700 − MH
 3  Shipped on the same day
AlterationCodeSpec.
Panel Mounts Bracket
Aluminum long type

Top of groove cut at 45 degrees		CTW45
Paneled support bra
Blanket Aluminum Long
Type at 45 degrees on both ends
Cut it. Installation example
Panel Mounts
One additional mounting holeMH Add one M5 mounting hole at the center of the L dimension.
[ ! ] The cut surface is sharp. Be careful not to scratch your hands.

Product Overview of Panel Mounts

Used to reinforce the panel.
It is possible to reinforce the panel by adding holes in the middle and attaching a Panel Mounts bracket.
The Panel Mounts bracket has pre-tapped holes.
Panel Mounts Bracket Aluminum Long Type Related Image 1_Product Overview

■ Panel Mounts bracket types

Product NamePanel Mounts Bracket Panel clamp
bracket
Resin Type Aluminum Type Length Specification
Aluminum long type		Steel Stainless Steel Type
image

Panel Mounts bracket aluminum long type Related image 1_Panel Mounts bracket types

Panel Mounts bracket aluminum long type Related image 2_Panel Mounts bracket types

Panel Mounts bracket aluminum long type Related image 3_Panel Mounts bracket types

Panel Mounts bracket aluminum long type Related image 4_Panel Mounts bracket types

Panel Mounts bracket aluminum long type Related image 5_Panel Mounts bracket types

Use Case

Panel Mounts bracket aluminum long type Related image 8_Panel Mounts bracket types

DescriptionSimply insert the T-shaped stopper into the frame groove and turn 90 degrees for easy installation. Compatible with both 3mm and 5mm thick panels.This is an aluminum-type Panel Mounts bracket that is fixed to the frame using bolts and nuts.It can fill the gap between the frame and the panel. Also usable for reinforcement purposes.These are Panel Mounts brackets made of steel or stainless steel.Simply insert the T-shaped stopper into the frame groove and turn 90 degrees for easy installation. Compatible with both 3mm and 5mm thick panels. No need to drill holes in the panel.

How to Use Panel Mounts

Panel Mounts bracket Aluminum long type Related image 1_Example of use

It can fill the gap between the frame and the panel.
It can also be used for reinforcement purposes.

Panel Mounts Bracket

■ Summary

How to attach a panel to a bracket inside the frame.
It looks good and the panels are easy to remove, so it is recommended for use as safety covers, etc.
When the eccentric bracket HBLTH5 is used, it will be flush with the frame.
It is possible to install a panel 5mm or more thick, but it will protrude beyond the surface of the aluminium frame.

Use Case Precision equipment racks, food and pharmaceutical production equipment
Easy panel removal ×
Gap between frame do not have
Appearance beautiful
Panel size calculation Calculation required for corner processing ※4
Panel thickness (mm) 3mm (5/6 series)
5mm (5/6/8/8-45 series)

■ Installation method

(1) Additional tapped holes are required for the bracket (e.g. HBLTS6-C). This must be specified when ordering the bracket.
(2) Fasten the panel with the cover mounting bolts.
*If the panel is large, you can reinforce it by using a Panel Mounts bracket in the middle.

Panel Mounts bracket aluminum long type Related image 1_Installation method
 

Parts Selection Method of Panel Mounts

Components ①Aluminum frame ②Aluminum frame ③Bracket ④Bolt ⑤Panel ⑥Panel Mounts
bracket

Panel Mounts bracket Aluminum long type Related image 1_How to select parts

Panel Mounts bracket Aluminum long type Related image 2_How to select parts

Panel Mounts bracket Aluminum long type Related image 3_How to select parts

Panel Mounts bracket Aluminum long type Related image 4_How to select parts

Panel Mounts bracket Aluminum long type Related image 5_How to select parts

Panel Mounts bracket Aluminum long type Related image 6_How to select parts

Model example HFS6-3030-400 HFS6-3030-340 HBLFSN6-C-SET HCBM5-8 ACAE4H-336-336
-5-F316-G316-N5		HCBA6-SET
quantity 22441as needed

①Aluminum frame: No additional processing required
②Aluminum frame: No additional processing required
③Bracket: Additional tapped holes (M5)
④Bolt: Match with the hole diameter of the bracket.
⑤Panel: Hole processing (M5)

size

Leave 1mm clearance on each side.
Panel width (A) = Frame inner dimension (L1) - Clearance (2mm)
Panel width (B) = Frame inner dimension (L2) - Clearance (2mm)

Thickness

・M5 (5 series) frame thickness: 3mm
・For M6 and M8 (6 series and 8 (-45) series) frames: Thickness 5mm
Panel Mounts bracket aluminum long type Related image 1_Size
(Example) Panel Mounts size calculation
A=L1(400-30-30)-Clearance on both ends(2mm)=338mm
B = L2 (340) - Clearance at both ends (2 mm) = 338 mm
5mm thick, 4 holes (M5)
↓
AXAE4H-336-336-5-F316-G316-N5

⑥Panel Mounts bracket
Depending on the size of the panel, it is possible to reinforce the panel by adding holes in the middle and attaching Panel Mounts brackets.
The Panel Mounts bracket has pre-tapped holes.

Panel Mounts bracket Aluminum long type Related image 1_Panel Mounts bracket
Panel Mounts bracket Aluminum long type Related image 2_Panel Mounts bracket
 

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...

CAD Download

30
60
90
  1. 1
Part Number
HCBAL6-[50-2000/1]
HCBAL6S-[50-2000/1]
HCBAL8-[50-2000/1]
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipRoHSExtrusion No. Difference between the Extrusion Side and Attachment Face L
(mm)

-

1 Piece(s) 11 Day(s) or more 106550 ～ 2000

-

1 Piece(s) 11 Day(s) or more 106350 ～ 2000

-

1 Piece(s) 11 Day(s) or more 108550 ～ 2000

Loading...

  1. 1
 

Basic Information

Material Aluminum Material A6063S-T5

Configure

Clear All

3 Part Numbers

View Part Numbers

Configure Remaining Specifications
Completed
loading

Specification/Dimensions

  • Extrusion No.

    • 6
    • 8

    Clear

  • Difference between the Extrusion Side and Attachment Face

    • 3
    • 5

    Clear

  • L(mm)

     [50-2000/1mm Unit(s)]

    Clear

  • type

    • HCBAL

    Clear

  • CAD

    • 2D
    • 3D

    Clear

Days to Ship

    • All
    • 11 Day(s) or Less

    Clear

Specify Alterations

Additional Products in this Category

Complementary Products

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel：(60) 3 7890 6399
9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday)
Technical Inquiry

Payment Method

more
  • Credit Card
    • VISA
    • MasterCard
  • Bank Transfer
    • FPX
    • Interbank GIRO (IBG)

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm,    9am – 1pm(Sat) * Order cut-off time is 12pm

  • Tel: (60) 3 7890 6399
Inquiry
Mobile View

Copyright © MISUMI Corporation All Rights Reserved.