(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Locating Pins - Tip Shape Selectable (Full Threaded) (Part Numbers)
- Locating Pins - Tip Shape Selectable (Full Threaded) from MISUMI.
- Screw-fitting type without pilot. Costs for hole machining on fixtures can be reduced.
- The material of pin can be selected 2 types, steel SKS3 Equivalent or stainless steel SUS304.
- The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.
- Provided 3 options for alteration, Wrench flat, Wrench hole (φ3.5 mm) or Hex socket machining.
- Any alteration cannot be combined with the other alteration.
Part Number
Configured Part Number is shown.
Dimensional Drawing
Material | [M] Material | [S] Surface Treatment | [H] Hardness | P, B Configurable | P, B, ML Configurable |
No. | |||||
(1) | SKS3 Equivalent | — | Treated Hardness: 60 to 63 HRC | JPNG | JPNGL |
(2) | SKS3 Equivalent | Hard Chrome Plating | Treated Hardness: 50 HRC or more | GJPNG | GJPNGL |
Plating Hardness: HV750 or more | |||||
(3) | SKS3 Equivalent | — | — | BJPNG | BJPNGL |
(4) | SUS304 | — | — | SJPNG | SJPNGL |
| Tip Shape | |
| Shape A |  [ ! ]  |
| Shape B |  [!] ℓ2 = P-G 2tan30° Reference: 2tan30° ≒ 1.15 [ ! ] When G = P, add about C0.2 chamfering |
| Shape C |  [!] ℓ2 = P 2 ÷ tan30° +R- (R ÷ sin30°) Reference: tan30° ≒ 0.577, sin30° = 0.5 |
Specification Table
| Part Number | — | P | — | B | — | R | — | G | — | ML |
| JPNGA3 JPNGB5 SJPNGLC8 | — — — | P4 P6 P10 | — — — | B2 B3 B4 | — — | R2 R3 | — | G3 | — | ML10 |
| M (Coarse) | Thread Pitch | (a) | (d) |
| 3 | 0.5 | 1.3 | 2.2 |
| 4 | 0.7 | 1.3 | 2.9 |
| 5 | 0.8 | 1.3 | 3.7 |
| 6 | 1.0 | 1.7 | 4.4 |
| 8 | 1.25 | 2.0 | 6 |
| 10 | 1.5 | 2.5 | 7.7 |
| 12 | 1.75 | 3.0 | 9.4 |
| 16 | 2.0 | 3.0 | 13 |
| 20 | 2.5 | 4.4 | 16.4 |
[ ! ] There is no centering hole.
■P, B Configurable
*The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.
Part Number | P 0.1 mm Increments | B 0.1 mm Increments | R | G | ML | |||
Type | Tip | M | * Tightening Torque | 1 mm Increments | 1 mm Increments | |||
Config. | (Coarse) | N・cm | Shape A, Shape C only | Shape B only | ||||
JPNG GJPNG BJPNG SJPNG | A B C | 3 | 98 | 3.5 ～ 8.0 | 1.0 ～ 10.0 | 4.5 | ||
4 | 225 | 4.5 ～ 8.0 | 6 | |||||
5 | 461 | 5.5 ～ 8.0 | Shape A | 7.5 | ||||
6 | 784 | 6.5 ～ 10.0 | 1.0 ～ 15.0 | R ≥ P/2 | Shape B | 9 | ||
8 | 1911 | 9.0 ～ 15.0 | 1.0 ～ 30.0 | G ≤ P | 12 | |||
10 | 3783 | 11.0 ～ 17.0 | 3.0 ～ 30.0 | Shape C | 15 | |||
12 | 6605 | 13.0 ～ 20.0 | R ≤ P/2 | 18 | ||||
16 | 16366 | 17.0 ～ 27.0 | 5.0 ～ 30.0 | 24 | ||||
20 | 32928 | 21.0 ～ 30.0 | 30 | |||||
■P, B, ML Configurable
*The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.
Part Number | P 0.1 mm Increments | B 0.1 mm Increments | R | G | ML | |||
Type | Tip | M | * Tightening Torque | 1 mm Increments | 1 mm Increments | |||
Config. | (Coarse) | N・cm | Shape A, Shape C only | Shape B only | ||||
JPNGL GJPNGL BJPNGL SJPNGL | A B C | 3 | 98 | 3.5 ～ 8.0 | 1.0 ～ 10.0 | 4 to 9 | ||
4 | 225 | 4.5 ～ 8.0 | 5 to 12 | |||||
5 | 461 | 5.5 ～ 8.0 | Shape A | 7 to 15 | ||||
6 | 784 | 6.5 ～ 10.0 | 1.0 ～ 15.0 | R ≥ P/2 | Shape B | 8 to 18 | ||
8 | 1911 | 9.0 ～ 15.0 | 1.0 ～ 30.0 | G ≤ P | 10 to 24 | |||
10 | 3783 | 11.0 ～ 17.0 | 3.0 ～ 30.0 | Shape C | 12 to 30 | |||
12 | 6605 | 13.0 ～ 20.0 | R ≤ P/2 | 17 to 30 | ||||
16 | 16366 | 17.0 ～ 27.0 | 5.0 ～ 30.0 | 20 to 40 | ||||
20 | 32928 | 21.0 ～ 30.0 | 25 to 40 | |||||
Alterations
| Alterations Code | Alteration Details | Application Conditions | Ordering Example | |||||||||||||||||||||||||||||||
| SC | Adds Wrench Flats | SC = 1 mm Increments [ ! ]P-3 ≤ SC ≤ P-1,SC ≥ D [ ! ] When B ≤ 11, adds wrench flats on the tip. | JPNGA3-P6-B2-R3-SC5 | |||||||||||||||||||||||||||||||
| LAC | Adds a wrench hole (⌀3.5) | ø3.5 Hole Machining [ ! ] Applicable when B ≥ 10, P ≥ 8 | JPNGA6-P10-B10-R3-LAC | |||||||||||||||||||||||||||||||
| RAC | Adds a hex socket | Adds hex socket Select RAC = S [ ! ] Applicable to Shape B with M ≥ 6 only
| JPNGA6-P10-B10-R3-RAC3 |
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| BJPNGA3-P[3.5-6/0.1]-B[1-10/0.1]-R[2-500/1] |
| BJPNGA4-P[4.5-7/0.1]-B[1-10/0.1]-R[3-500/1] |
| BJPNGA5-P[5.5-8/0.1]-B[1-10/0.1]-R[3-500/1] |
| BJPNGA6-P[6.5-10/0.1]-B[1-15/0.1]-R[4-500/1] |
| BJPNGA8-P[9-13/0.1]-B[1-15/0.1]-R[5-500/1] |
| BJPNGA10-P[11-15/0.1]-B[3-20/0.1]-R[6-500/1] |
| BJPNGA12-P[13-18/0.1]-B[3-20/0.1]-R[7-500/1] |
| BJPNGA16-P[17-25/0.1]-B[5-20/0.1]-R[9-500/1] |
| BJPNGA20-P[22-30/0.1]-B[5-20/0.1]-R[11-500/1] |
| BJPNGB3-P[3.5-6/0.1]-B[1-10/0.1]-G[1-6/1] |
| BJPNGB4-P[4.5-7/0.1]-B[1-10/0.1]-G[1-7/1] |
| BJPNGB5-P[5.5-8/0.1]-B[1-10/0.1]-G[1-8/1] |
| BJPNGB6-P[6.5-10/0.1]-B[1-12/0.1]-G[1-10/1] |
| BJPNGB8-P[9-13/0.1]-B[1-15/0.1]-G[1-13/1] |
| BJPNGB10-P[11-15/0.1]-B[3-20/0.1]-G[1-15/1] |
| BJPNGB12-P[13-18/0.1]-B[3-20/0.1]-G[1-18/1] |
| BJPNGB16-P[17-25/0.1]-B[5-20/0.1]-G[1-25/1] |
| BJPNGB20-P[22-30/0.1]-B[5-20/0.1]-G[1-30/1] |
| BJPNGC3-P[3.5-6/0.1]-B[1-10/0.1]-R[1-3/1] |
| BJPNGC4-P[4.5-7/0.1]-B[1-10/0.1]-R[1-3/1] |
| BJPNGC5-P[5.5-8/0.1]-B[1-10/0.1]-R[1-4/1] |
| BJPNGC6-P[6.5-10/0.1]-B[1-12/0.1]-R[1-5/1] |
| BJPNGC8-P[9-13/0.1]-B[1-15/0.1]-R[1-6/1] |
| BJPNGC10-P[11-15/0.1]-B[3-20/0.1]-R[1-7/1] |
| BJPNGC12-P[13-18/0.1]-B[3-20/0.1]-R[1-9/1] |
| BJPNGC16-P[17-25/0.1]-B[5-20/0.1]-R[1-12/1] |
| BJPNGC20-P[22-30/0.1]-B[5-20/0.1]-R[1-15/1] |
| GJPNGA3-P[3.5-6/0.1]-B[1-10/0.1]-R[2-500/1] |
| GJPNGA4-P[4.5-7/0.1]-B[1-10/0.1]-R[3-500/1] |
| GJPNGA5-P[5.5-8/0.1]-B[1-10/0.1]-R[3-500/1] |
| GJPNGA6-P[6.5-10/0.1]-B[1-15/0.1]-R[4-500/1] |
| GJPNGA8-P[9-13/0.1]-B[1-15/0.1]-R[5-500/1] |
| GJPNGA10-P[11-15/0.1]-B[3-20/0.1]-R[6-500/1] |
| GJPNGA12-P[13-18/0.1]-B[3-20/0.1]-R[7-500/1] |
| GJPNGA16-P[17-25/0.1]-B[5-20/0.1]-R[9-500/1] |
| GJPNGA20-P[22-30/0.1]-B[5-20/0.1]-R[11-500/1] |
| GJPNGB3-P[3.5-6/0.1]-B[1-10/0.1]-G[1-6/1] |
| GJPNGB4-P[4.5-7/0.1]-B[1-10/0.1]-G[1-7/1] |
| GJPNGB5-P[5.5-8/0.1]-B[1-10/0.1]-G[1-8/1] |
| GJPNGB6-P[6.5-10/0.1]-B[1-15/0.1]-G[1-10/1] |
| GJPNGB8-P[9-13/0.1]-B[1-15/0.1]-G[1-13/1] |
| GJPNGB10-P[11-15/0.1]-B[3-20/0.1]-G[1-15/1] |
| GJPNGB12-P[13-18/0.1]-B[3-20/0.1]-G[1-18/1] |
| GJPNGB16-P[17-25/0.1]-B[5-20/0.1]-G[1-25/1] |
| GJPNGB20-P[22-30/0.1]-B[5-20/0.1]-G[1-30/1] |
| GJPNGC3-P[3.5-6/0.1]-B[1-10/0.1]-R[1-3/1] |
| GJPNGC4-P[4.5-8/0.1]-B[1-10/0.1]-R[1-3/1] |
| GJPNGC5-P[5.5-8/0.1]-B[1-10/0.1]-R[1-4/1] |
| GJPNGC6-P[6.5-10/0.1]-B[1-12/0.1]-R[1-5/1] |
| GJPNGC8-P[9-13/0.1]-B[1-15/0.1]-R[1-6/1] |
| GJPNGC10-P[11-15/0.1]-B[3-20/0.1]-R[1-7/1] |
| GJPNGC12-P[13-18/0.1]-B[3-20/0.1]-R[1-9/1] |
| GJPNGC16-P[17-25/0.1]-B[5-20/0.1]-R[1-12/1] |
| GJPNGC20-P[22-30/0.1]-B[5-20/0.1]-R[1-15/1] |
| JPNGA3-P[3.5-6/0.1]-B[1-10/0.1]-R[2-500/1] |
| JPNGA3-P[7-8/0.1]-B[1-10/0.1]-R[2-500/1] |
| JPNGA4-P[4.5-8/0.1]-B[1-10/0.1]-R[3-500/1] |
| JPNGA5-P[5.5-8/0.1]-B[1-10/0.1]-R[3-500/1] |
| JPNGA6-P[6.5-10/0.1]-B[1-15/0.1]-R[4-500/1] |
| JPNGA8-P[9-13/0.1]-B[1-15/0.1]-R[5-500/1] |
| JPNGA10-P[11-15/0.1]-B[3-20/0.1]-R[6-500/1] |
| JPNGA12-P[13-18/0.1]-B[3-20/0.1]-R[7-500/1] |
| JPNGA16-P[17-25/0.1]-B[5-20/0.1]-R[9-500/1] |
| JPNGA20-P[22-30/0.1]-B[5-20/0.1]-R[11-500/1] |
| JPNGB3-P[3.5-6/0.1]-B[1-10/0.1]-G[1-6/1] |
| JPNGB4-P[4.5-7/0.1]-B[1-10/0.1]-G[1-7/1] |
| JPNGB5-P[5.5-8/0.1]-B[1-10/0.1]-G[1-8/1] |
| JPNGB6-P[6.5-10/0.1]-B[1-12/0.1]-G[1-10/1] |
| JPNGB8-P[9-13/0.1]-B[1-15/0.1]-G[1-13/1] |
| JPNGB10-P[11-17/0.1]-B[3-30/0.1]-G[1-17/1] |
| JPNGB12-P[13-20/0.1]-B[3-30/0.1]-G[1-20/1] |
| JPNGB16-P[17-25/0.1]-B[5-20/0.1]-G[1-25/1] |
| JPNGB20-P[22-30/0.1]-B[5-20/0.1]-G[1-30/1] |
| JPNGC3-P[3.5-6/0.1]-B[1-10/0.1]-R[1-3/1] |
| JPNGC4-P[4.5-8/0.1]-B[1-10/0.1]-R[1-4/1] |
| JPNGC5-P[5.5-8/0.1]-B[1-10/0.1]-R[1-4/1] |
| JPNGC6-P[6.5-10/0.1]-B[1-12/0.1]-R[1-5/1] |
| JPNGC8-P[9-13/0.1]-B[1-15/0.1]-R[1-6/1] |
| JPNGC10-P[11-15/0.1]-B[3-20/0.1]-R[1-7/1] |
| JPNGC12-P[13-18/0.1]-B[3-20/0.1]-R[1-9/1] |
| JPNGC16-P[17-25/0.1]-B[5-20/0.1]-R[1-12/1] |
| JPNGC20-P[22-30/0.1]-B[5-20/0.1]-R[1-15/1] |
| SJPNGA3-P[3.5-6/0.1]-B[1-10/0.1]-R[2-500/1] |
| SJPNGA4-P[4.5-7/0.1]-B[1-10/0.1]-R[3-500/1] |
| SJPNGA5-P[5.5-8/0.1]-B[1-10/0.1]-R[3-500/1] |
| SJPNGA6-P[6.5-10/0.1]-B[1-15/0.1]-R[4-500/1] |
| SJPNGA8-P[9-13/0.1]-B[1-15/0.1]-R[5-500/1] |
| SJPNGA10-P[11-15/0.1]-B[3-20/0.1]-R[6-500/1] |
| SJPNGA12-P[13-18/0.1]-B[3-20/0.1]-R[7-500/1] |
| SJPNGA16-P[17-25/0.1]-B[5-20/0.1]-R[9-500/1] |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Insertion Guide Tip Type | Surface Treatment | Heat Treatment | Material | Locating Side Outer Dia. P (Ø) (mm) | Mounting Side Outer Dia. M | G (mm) | Positioning Part Length B (mm) | R (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | 3 Day(s) | 10 | R | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 3.5 ～ 6 | 3 | - | 1 ～ 10 | 2 ～ 500 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | R | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 4.5 ～ 7 | 4 | - | 1 ～ 10 | 3 ～ 500 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | R | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 5.5 ～ 8 | 5 | - | 1 ～ 10 | 3 ～ 500 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | R | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 6.5 ～ 10 | 6 | - | 1 ～ 15 | 4 ～ 500 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | R | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 9 ～ 13 | 8 | - | 1 ～ 15 | 5 ～ 500 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | R | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 11 ～ 15 | 10 | - | 3 ～ 20 | 6 ～ 500 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | R | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 13 ～ 18 | 12 | - | 3 ～ 20 | 7 ～ 500 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | R | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 17 ～ 25 | 16 | - | 5 ～ 20 | 9 ～ 500 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | R | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 22 ～ 30 | 20 | - | 5 ～ 20 | 11 ～ 500 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Tapered | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 3.5 ～ 6 | 3 | 1 ～ 6 | 1 ～ 10 | - | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Tapered | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 4.5 ～ 7 | 4 | 1 ～ 7 | 1 ～ 10 | - | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Tapered | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 5.5 ～ 8 | 5 | 1 ～ 8 | 1 ～ 10 | - | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Tapered | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 6.5 ～ 10 | 6 | 1 ～ 10 | 1 ～ 12 | - | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Tapered | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 9 ～ 13 | 8 | 1 ～ 13 | 1 ～ 15 | - | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Tapered | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 11 ～ 15 | 10 | 1 ～ 15 | 3 ～ 20 | - | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Tapered | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 13 ～ 18 | 12 | 1 ～ 18 | 3 ～ 20 | - | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Tapered | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 17 ～ 25 | 16 | 1 ～ 25 | 5 ～ 20 | - | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Tapered | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 22 ～ 30 | 20 | 1 ～ 30 | 5 ～ 20 | - | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Taper R | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 3.5 ～ 6 | 3 | - | 1 ～ 10 | 1 ～ 3 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Taper R | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 4.5 ～ 7 | 4 | - | 1 ～ 10 | 1 ～ 3 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Taper R | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 5.5 ～ 8 | 5 | - | 1 ～ 10 | 1 ～ 4 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Taper R | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 6.5 ～ 10 | 6 | - | 1 ～ 12 | 1 ～ 5 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Taper R | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 9 ～ 13 | 8 | - | 1 ～ 15 | 1 ～ 6 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Taper R | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 11 ～ 15 | 10 | - | 3 ～ 20 | 1 ～ 7 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Taper R | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 13 ～ 18 | 12 | - | 3 ～ 20 | 1 ～ 9 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Taper R | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 17 ～ 25 | 16 | - | 5 ～ 20 | 1 ～ 12 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Taper R | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 22 ～ 30 | 20 | - | 5 ～ 20 | 1 ～ 15 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | R | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Steel] SKS3 Equivalent | 3.5 ～ 6 | 3 | - | 1 ～ 10 | 2 ～ 500 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | R | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Steel] SKS3 Equivalent | 4.5 ～ 7 | 4 | - | 1 ～ 10 | 3 ～ 500 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | R | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Steel] SKS3 Equivalent | 5.5 ～ 8 | 5 | - | 1 ～ 10 | 3 ～ 500 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | R | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Steel] SKS3 Equivalent | 6.5 ～ 10 | 6 | - | 1 ～ 15 | 4 ～ 500 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | R | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Steel] SKS3 Equivalent | 9 ～ 13 | 8 | - | 1 ～ 15 | 5 ～ 500 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | R | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Steel] SKS3 Equivalent | 11 ～ 15 | 10 | - | 3 ～ 20 | 6 ～ 500 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | R | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Steel] SKS3 Equivalent | 13 ～ 18 | 12 | - | 3 ～ 20 | 7 ～ 500 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | R | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Steel] SKS3 Equivalent | 17 ～ 25 | 16 | - | 5 ～ 20 | 9 ～ 500 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | R | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Steel] SKS3 Equivalent | 22 ～ 30 | 20 | - | 5 ～ 20 | 11 ～ 500 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Tapered | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Steel] SKS3 Equivalent | 3.5 ～ 6 | 3 | 1 ～ 6 | 1 ～ 10 | - | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Tapered | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Steel] SKS3 Equivalent | 4.5 ～ 7 | 4 | 1 ～ 7 | 1 ～ 10 | - | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Tapered | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Steel] SKS3 Equivalent | 5.5 ～ 8 | 5 | 1 ～ 8 | 1 ～ 10 | - | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Tapered | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Steel] SKS3 Equivalent | 6.5 ～ 10 | 6 | 1 ～ 10 | 1 ～ 15 | - | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Tapered | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Steel] SKS3 Equivalent | 9 ～ 13 | 8 | 1 ～ 13 | 1 ～ 15 | - | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Tapered | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Steel] SKS3 Equivalent | 11 ～ 15 | 10 | 1 ～ 15 | 3 ～ 20 | - | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Tapered | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Steel] SKS3 Equivalent | 13 ～ 18 | 12 | 1 ～ 18 | 3 ～ 20 | - | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Tapered | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Steel] SKS3 Equivalent | 17 ～ 25 | 16 | 1 ～ 25 | 5 ～ 20 | - | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Tapered | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Steel] SKS3 Equivalent | 22 ～ 30 | 20 | 1 ～ 30 | 5 ～ 20 | - | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Taper R | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Steel] SKS3 Equivalent | 3.5 ～ 6 | 3 | - | 1 ～ 10 | 1 ～ 3 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Taper R | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Steel] SKS3 Equivalent | 4.5 ～ 8 | 4 | - | 1 ～ 10 | 1 ～ 3 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Taper R | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Steel] SKS3 Equivalent | 5.5 ～ 8 | 5 | - | 1 ～ 10 | 1 ～ 4 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Taper R | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Steel] SKS3 Equivalent | 6.5 ～ 10 | 6 | - | 1 ～ 12 | 1 ～ 5 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Taper R | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Steel] SKS3 Equivalent | 9 ～ 13 | 8 | - | 1 ～ 15 | 1 ～ 6 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Taper R | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Steel] SKS3 Equivalent | 11 ～ 15 | 10 | - | 3 ～ 20 | 1 ～ 7 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Taper R | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Steel] SKS3 Equivalent | 13 ～ 18 | 12 | - | 3 ～ 20 | 1 ～ 9 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Taper R | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Steel] SKS3 Equivalent | 17 ～ 25 | 16 | - | 5 ～ 20 | 1 ～ 12 | ||
- | 1 Piece(s) | 6 Day(s) | 10 | Taper R | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Steel] SKS3 Equivalent | 22 ～ 30 | 20 | - | 5 ～ 20 | 1 ～ 15 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | R | Not Provided | Dip Quenching | [Steel] SKS3 Equivalent | 3.5 ～ 6 | 3 | - | 1 ～ 10 | 2 ～ 500 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | R | Not Provided | Dip Quenching | [Steel] SKS3 Equivalent | 7 ～ 8 | 3 | - | 1 ～ 10 | 2 ～ 500 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | R | Not Provided | Dip Quenching | [Steel] SKS3 Equivalent | 4.5 ～ 8 | 4 | - | 1 ～ 10 | 3 ～ 500 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | R | Not Provided | Dip Quenching | [Steel] SKS3 Equivalent | 5.5 ～ 8 | 5 | - | 1 ～ 10 | 3 ～ 500 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | R | Not Provided | Dip Quenching | [Steel] SKS3 Equivalent | 6.5 ～ 10 | 6 | - | 1 ～ 15 | 4 ～ 500 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | R | Not Provided | Dip Quenching | [Steel] SKS3 Equivalent | 9 ～ 13 | 8 | - | 1 ～ 15 | 5 ～ 500 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | R | Not Provided | Dip Quenching | [Steel] SKS3 Equivalent | 11 ～ 15 | 10 | - | 3 ～ 20 | 6 ～ 500 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | R | Not Provided | Dip Quenching | [Steel] SKS3 Equivalent | 13 ～ 18 | 12 | - | 3 ～ 20 | 7 ～ 500 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | R | Not Provided | Dip Quenching | [Steel] SKS3 Equivalent | 17 ～ 25 | 16 | - | 5 ～ 20 | 9 ～ 500 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | R | Not Provided | Dip Quenching | [Steel] SKS3 Equivalent | 22 ～ 30 | 20 | - | 5 ～ 20 | 11 ～ 500 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Tapered | Not Provided | Dip Quenching | [Steel] SKS3 Equivalent | 3.5 ～ 6 | 3 | 1 ～ 6 | 1 ～ 10 | - | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Tapered | Not Provided | Dip Quenching | [Steel] SKS3 Equivalent | 4.5 ～ 7 | 4 | 1 ～ 7 | 1 ～ 10 | - | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Tapered | Not Provided | Dip Quenching | [Steel] SKS3 Equivalent | 5.5 ～ 8 | 5 | 1 ～ 8 | 1 ～ 10 | - | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Tapered | Not Provided | Dip Quenching | [Steel] SKS3 Equivalent | 6.5 ～ 10 | 6 | 1 ～ 10 | 1 ～ 12 | - | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Tapered | Not Provided | Dip Quenching | [Steel] SKS3 Equivalent | 9 ～ 13 | 8 | 1 ～ 13 | 1 ～ 15 | - | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Tapered | Not Provided | Dip Quenching | [Steel] SKS3 Equivalent | 11 ～ 17 | 10 | 1 ～ 17 | 3 ～ 30 | - | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Tapered | Not Provided | Dip Quenching | [Steel] SKS3 Equivalent | 13 ～ 20 | 12 | 1 ～ 20 | 3 ～ 30 | - | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Tapered | Not Provided | Dip Quenching | [Steel] SKS3 Equivalent | 17 ～ 25 | 16 | 1 ～ 25 | 5 ～ 20 | - | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Tapered | Not Provided | Dip Quenching | [Steel] SKS3 Equivalent | 22 ～ 30 | 20 | 1 ～ 30 | 5 ～ 20 | - | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Taper R | Not Provided | Dip Quenching | [Steel] SKS3 Equivalent | 3.5 ～ 6 | 3 | - | 1 ～ 10 | 1 ～ 3 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Taper R | Not Provided | Dip Quenching | [Steel] SKS3 Equivalent | 4.5 ～ 8 | 4 | - | 1 ～ 10 | 1 ～ 4 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Taper R | Not Provided | Dip Quenching | [Steel] SKS3 Equivalent | 5.5 ～ 8 | 5 | - | 1 ～ 10 | 1 ～ 4 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Taper R | Not Provided | Dip Quenching | [Steel] SKS3 Equivalent | 6.5 ～ 10 | 6 | - | 1 ～ 12 | 1 ～ 5 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Taper R | Not Provided | Dip Quenching | [Steel] SKS3 Equivalent | 9 ～ 13 | 8 | - | 1 ～ 15 | 1 ～ 6 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Taper R | Not Provided | Dip Quenching | [Steel] SKS3 Equivalent | 11 ～ 15 | 10 | - | 3 ～ 20 | 1 ～ 7 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Taper R | Not Provided | Dip Quenching | [Steel] SKS3 Equivalent | 13 ～ 18 | 12 | - | 3 ～ 20 | 1 ～ 9 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Taper R | Not Provided | Dip Quenching | [Steel] SKS3 Equivalent | 17 ～ 25 | 16 | - | 5 ～ 20 | 1 ～ 12 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Taper R | Not Provided | Dip Quenching | [Steel] SKS3 Equivalent | 22 ～ 30 | 20 | - | 5 ～ 20 | 1 ～ 15 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | R | Not Provided | Not Provided | [Stainless Steel] SUS304 | 3.5 ～ 6 | 3 | - | 1 ～ 10 | 2 ～ 500 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | R | Not Provided | Not Provided | [Stainless Steel] SUS304 | 4.5 ～ 7 | 4 | - | 1 ～ 10 | 3 ～ 500 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | R | Not Provided | Not Provided | [Stainless Steel] SUS304 | 5.5 ～ 8 | 5 | - | 1 ～ 10 | 3 ～ 500 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | R | Not Provided | Not Provided | [Stainless Steel] SUS304 | 6.5 ～ 10 | 6 | - | 1 ～ 15 | 4 ～ 500 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | R | Not Provided | Not Provided | [Stainless Steel] SUS304 | 9 ～ 13 | 8 | - | 1 ～ 15 | 5 ～ 500 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | R | Not Provided | Not Provided | [Stainless Steel] SUS304 | 11 ～ 15 | 10 | - | 3 ～ 20 | 6 ～ 500 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | R | Not Provided | Not Provided | [Stainless Steel] SUS304 | 13 ～ 18 | 12 | - | 3 ～ 20 | 7 ～ 500 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | R | Not Provided | Not Provided | [Stainless Steel] SUS304 | 17 ～ 25 | 16 | - | 5 ～ 20 | 9 ～ 500 |
Loading...
Basic Information
| Basic Shape | Large Head | Environmentally friendly | RoHS Compliant (10 Substances) | Characteristics/Applications | Not Applicable |
|---|---|---|---|---|---|
| Insertion Guide Tip Shape | Round | Insertion Guide Specifications | Not Provided | Mounting Side Shape | Threaded |
| Locating Side O.D. Tolerance | 0/-0.1 | Dimension Configurable Type | P, B Dimension Configurable Type |
Specification/Dimensions
-
Insertion Guide Tip Type
-
Tapered -
Taper R -
R
-
-
Surface Treatment
- Not Provided
- Hard Chrome Plating
-
Heat Treatment
- Not Provided
- Dip Quenching
-
Material
- Steel
- Stainless Steel
- Steel
-
Locating Side Outer Dia. P (Ø)(mm)
-
Mounting Side Outer Dia. M
- 3
- 4
- 5
- 6
- 8
- 10
- 12
- 16
- 20
-
G(mm)
-
Positioning Part Length B(mm)
-
R(mm)
-
type
- BJPNGA
- BJPNGB
- BJPNGC
- GJPNGA
- GJPNGB
- GJPNGC
- JPNGA
- JPNGB
- JPNGC
- SJPNGA
- SJPNGB
- SJPNGC
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 3 Day(s) or Less
- 6 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Pusher Pins - Straight
- Locating Pins - High Hardness Stainless Steel Sphere Large Head (Threaded)
- Locating Pins - High Hardness Stainless Steel Sphere Large Head (Tapped)
- Height Adjusting Pins - Press Fit
- Locating Pin Large Head, Selectable Tapered Angle, Selectable Tolerance, Threaded
- Straight Pin (BJ721)
- Ear Flex Locator (Locate Pin)
- Single-Action Flex Locator (Taper Pin, Straight Pin) (CP722)
Complementary Products
-
![[High Precision] X-Axis Cross Roller - Micrometer Head](//content.misumi-ec.com/image/upload/t_product_recommend_a/v1/p/cn/product/series/110300196460/110300196460_20201112120724.jpg?$product_recommend_a$)
[High Precision] X-Axis Cross Roller - Micrometer Head
MISUMI Standard Price : MYR 804.71- Days to Ship : 6 Day(s) or more
-
Sheet Metal Bracket For 5 Series (Slot Width 6mm) Aluminum Frames - Bent-Shaped
MISUMI Standard Price : MYR 5.78- Days to Ship : 1 Day(s) or more
![[High Precision] X-Axis Cross Roller - Micrometer Head](http://content.misumi-ec.com/image/upload/t_product_recommend_a/v1/p/cn/product/series/110300196460/110300196460_20201112120724.jpg?$product_recommend_a$)
Customers Who Viewed This Item Also Viewed
-
-
-
-
-
-
-
Locating Pins - Tip Shape Selectable (Tip Length Configurable-Threaded)MISUMI
Days to Ship : 3 Day(s) or more
-
-
-
Locating Pins - Tip Shape Selectable (Configurable Shoulder Thickness-Threaded)MISUMI
Days to Ship : 4 Day(s) or more
-
Bushings for Locating Pins - Straight, Standard / Thin WallMISUMI
Standard Price : MYR 11.58-
Days to Ship : 1 Day(s) or more
-
Locating Pins-High Hardness Stainless Steel/R/Taper R/ThreadedMISUMI
Days to Ship : 6 Day(s) or more
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy