(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Webcode Seach | Series
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

Loading

  • [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
  • [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

  • How can we improve?

    How can we improve?

    Comments
    Name (Optional)
    E-mail Address (Optional)
    Tel (Optional)

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Customer Privacy Policy

    Thank you for your cooperation.

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Please use the inquiry form.

    Customer Privacy Policy

Nut Mounting Bracket - 6 Series, 8mm Slot, 1 Slot (HBLFSR6-SEP)

Nut Mounting Bracket - 6 Series, 8mm Slot, 1 Slot HBLFSR6-SEP

Click this image to zoom it.

Move the mouse over the image to zoom

  • Nut Mounting Bracket - 6 Series, 8mm Slot, 1 Slot
  • Nut Mounting Bracket - 6 Series, 8mm Slot, 1 Slot
  • Nut Mounting Bracket - 6 Series, 8mm Slot, 1 Slot
  • Volume Discount

MISUMI

MISUMI

By pressing the nut against the long protrusion, troublesome positioning of the nut is eliminated.

PDFP.2-586-2014

Part Number

Configured Part Number is shown.

HBLFSR6-SEP

Dimensional Drawing of 90 degree Brackets

90 degree Brackets HBLFSR6

<Rear view>

6 Series (groove width 8 mm) - For single row groove - Nut stop 90 degree Brackets: Related images
[ ! ]The hole is elongated to accommodate different nut hole positions.
[ ! ]If the nut is dropped from a high position, the protrusion may be damaged.
[ ! ]We recommend using a washer. (See additional processing/SEC below.)
[ ! ]For the 90 degree Brackets squareness, refer to the squareness tolerance table
. [ M ] Material: ADC12 [ S ] Surface treatment: None

Specification Table of 90 degree Brackets

90 degree Brackets Model
HBLFSR6
・The price list below is currentas of April 2011.
・To check the latest price, please click the "Check Price" button after confirming the model number.

[ ! ]Bolts and nuts are not included with the 90 degree Brackets.
Please check the table below for compatible bolts and nuts.
If you would like to purchase a bolt and nut set, please select from the narrowing conditions [Accessories].
For detailed specifications, please check the links for each product under "Applicable bolts and nuts set" (can be purchased separately).

ModelmassSuitable bolts and T-nutsAllowable load
(g)boltQuantityT-NutQuantity(N)
HBLFSR615CBM6-122HNTT6-621176

Additional Work of 90 degree Brackets

Model−(C・SET・SST・SEU・SSU・SEP・SSP・SEC)
HBLFSR6−SET
HBLFSR6−C-SET
AlterationsCodeSpec.Applicable 90 degree Brackets
Additional cover mounting
holes		C
The 90 degree Brackets can have M5 tapped holes on both sides for mounting the cover .
Model example: HBLFSR6-C
(mounting screwhereHCBM)
6 Series (groove width 8 mm) - For single row groove - Nut stop 90 degree Brackets: Related images		HBLFSN6
HBLFSN6-5
HBLFSNB6
HBLFSNM6
CHBLFSN6
HBLFS6
HBLFSB6
HBLFSL6
HBLFSR6
HBLFSNK6
HBLFSNE6
HBLFSH6
Usage example■Cover installation example
● Please specify alteration code -C.

6 Series (groove width 8 mm) - For single row groove - Nut stop 90 degree Brackets: Related images
AlterationsCodeSpec.Applicable 90 degree Brackets
Applicable
bolts and nuts
included		SET
SST
(Stainless steel)
SEU
(Pre-assembly spring nut)
SSU
(Pre-assembly spring nut)
(Stainless steel)
SEP
(Post-assembly spring nut)
SSP
(Post-assembly spring nut)
(Stainless steel)
SEC
(Washer assembled bolt/nut)		The applicable bolts and nuts for attaching the 90 degree Brackets to the frame are included in the set.
(Added to the 90 degree Brackets price)

(Example) When HBLFSR6 is specified
 boltnut
CodeModelQuantityModelQuantity
SETCBM6-122HNTT6-62
SSTSCB6-12HNTTSN6-6
SEUCBM6-12HNTU6-6
SSUSCB6-12SHNTU6-6
SEPCBM6-12HNTP6-6
SSPSCB6-12SHNTP6-6
SECHCBST6-15HNTT6-6
[ ! ]When specifying a part other than HBLFSR6, please check the appropriate bolts and nuts.		-
HBLFSN6
HBLFSN6-5
HBLFSNB6
HBLFSNM6
CHBLFSN6
HBLFS6
HBLFSB6
HBLFSL6
HBLFSR6
HBLFSNK6−
HBLFSNE6
HBLFSH6
[ ! ]The bolts for the black anodized and cathodic electroplated (black) 90 degree Brackets aretheseHCBMTB (black trivalent chromate).
[ ! ] When specifying -SET, -SEU, or -SEP for 90 degree Brackets other than black anodized and cathodic electroplated (black), the included bolts are not RoHS compliant.

■ Details of applicable bolt and nut sets (can be purchased separately)

Additional machining modelboltnut
ModelMaterialtypeModelMaterialStopper
SETCBM6-12ironFirst inHNTT6-6ironnone
SSTSCB6-12stainlessFirst inHNTTSN6-6stainlessnone
SEUCBM6-12ironFirst inHNTU6-6ironYes
SSUSCB6-12stainlessFirst inSHNTU6-6stainlessYes
SEPCBM6-12ironLater insertionHNTP6-6ironYes
SSPSCB6-12stainlessLater insertionSHNTP6-6stainlessYes
SECHCBST6-15Iron (with washer)First inHNTT6-6ironnone

How to Use of 90 degree Brackets

  • This type has a protrusion that fits into the frame groove.
    The protrusion acts as a rotation stopper during fastening work, making it easy to work with.
  • It is now easier to adjust the nut position, reducing work time.
If you push the nut all the way in until it hits the protrusion, the 90 degree Brackets and nut holes will align, eliminating the need for fine adjustment.
[NG]Short nuts, HNTM and HNTAM are not applicable.
6 Series (groove width 8 mm) - For single row groove - Nut stop 90 degree Brackets: Related images

Technical Information of 90 degree Brackets

■
For the squareness of the 90 degree Brackets, please refer to the squareness tolerance table.
■How to consider the 90 degree Brackets allowable load

 
As shown in the left figure, two frames are set up, a frame is placed between them, and two 90 degree Brackets are attached underneath, and the allowable load per unit is shown.
The allowable load here indicates the load at which the 90 degree Brackets can maintain its position (without breaking or slipping) when all mounting holes on the 90 degree Brackets are fixed with bolts and a load is applied.

Similar Products of 90 degree Brackets

■ 90 degree Brackets with protrusion

There is a protrusion on the mounting surface to prevent rotation.

Product nameNut stop 90 degree BracketsInverted
90 degree Brackets with protrusion		Single Rib 90 degree Brackets
90 degree Brackets with protrusion on one side		Single-sided slotted 90 degree Brackets90 degree Brackets with cover
Product Photos

No protrusions on one side, can be connected to plate

MaterialADC12ADC12ADC12ADC12ADC12ADC12
90 degree Brackets FeaturesThe long protrusion serves as a nut stopper, eliminating the need for fine adjustment of the nut position.The mounting surface has a protrusion, making it easy to position when mounting. This is the most conventional type.This type has a rib (side) on only one side, making it easy to turn the hex wrench.The protrusion is on one side only and is useful when connecting frames/plates.One side has an elongated hole. The bolt head does not interfere even when using a bolt with an assembled washer.This type is equipped with a dustproof cover. Dust does not accumulate inside, making it hygienic.
Representative modelThis productHBLFSN6HBLFSL6HBLFSNK6HBLFSH6HBLFSNT6

Related Items of 90 degree Brackets

■90 degree Brackets 6 series (groove width 8mm)

Product nameAluminum frameBlind JointFrame capGroove covernut
photograph

Product pageHereHereHereHereHere

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...

CAD Download

30
45
60
  1. 1
Part Number
HBLFSR6-SEP
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipRoHSMounting Hole Alteration for Covers Accessory

MYR 13.34

1 Piece(s)Available 4 Day(s) or more -Not ProvidedSEP (Screws, Post-Assembly Insertion Spring Nuts Set)

Loading...

  1. 1
 

Basic Information

Bracket Type Details Tabbed Brackets Additional Functions (Tabbed Bracket) Lock Nuts Tab Position Tabbed at Both Sides
Compatible No. of Slots 1 Slot Perpendicularity No Standard Series MISUMI Brackets for 6 Series (Extrusion Slot Width 8mm)
Material ADC12 Extrusion Series HFS Extrusion No. 6
Extrusion Size For 30 and 60 Bracket Type Nut Mounting Brackets Applicable Screws M6 Screws
Number of Extrusion Connection Holes 2

Please check the type/dimensions/specifications of the part HBLFSR6-SEP in the Nut Mounting Bracket - 6 Series, 8mm Slot, 1 Slot series.

Configure

Clear All

1 Part Numbers

View Part Numbers

Configure Remaining Specifications
Completed
loading

Specification/Dimensions

  • type

    • HBLFSR6

    Clear

  • Mounting Hole Alteration for Covers

    • C (Tap for Cover Mounting)
    • Not Provided

    Clear

  • Accessory

    • Not Provided
    • SEC (Screws with Captured Washers and Nuts Set)
    • SEP (Screws, Post-Assembly Insertion Spring Nuts Set)
    • SET (Screws, Nuts Set)
    • SEU (Screws, Pre-Assembly Insertion Spring Nuts Set)
    • SSP (Set of Stainless Steel Screw and Post-assy. Insertion Spring Nut)
    • SST (Set of Stainless Steel Screws and Nuts)
    • SSU (Set of Stainless Steel Screws and Pre-Assembly Insertion Spring Nuts)

    Clear

  • CAD

    • 2D
    • 3D

    Clear

Days to Ship

    • All
    • 1 Day(s) or Less
    • 4 Day(s) or Less

    Clear

Specify Alterations

Products like this...

Part Number
HBLFSR6-C-SEP
HBLFSR6-C-SET
HBLFSR6-C-SEU
HBLFSR6-SET
HBLFSR6-SEU
HBLFSR6-SSP
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipRoHSMounting Hole Alteration for Covers Accessory

MYR 14.54

1 Piece(s)Available 4 Day(s) or more -C (Tap for Cover Mounting)SEP (Screws, Post-Assembly Insertion Spring Nuts Set)

MYR 12.12

1 Piece(s)Available 4 Day(s) or more -C (Tap for Cover Mounting)SET (Screws, Nuts Set)

MYR 14.54

1 Piece(s)Available 4 Day(s) or more -C (Tap for Cover Mounting)SEU (Screws, Pre-Assembly Insertion Spring Nuts Set)

MYR 10.91

1 Piece(s)Available 4 Day(s) or more -Not ProvidedSET (Screws, Nuts Set)

MYR 13.34

1 Piece(s)Available 4 Day(s) or more -Not ProvidedSEU (Screws, Pre-Assembly Insertion Spring Nuts Set)

MYR 14.54

1 Piece(s)Available 4 Day(s) or more -Not ProvidedSSP (Set of Stainless Steel Screw and Post-assy. Insertion Spring Nut)

Additional Products in this Category

Complementary Products

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel：(60) 3 7890 6399
9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday)
Technical Inquiry

Payment Method

more
  • Credit Card
    • VISA
    • MasterCard
  • Bank Transfer
    • FPX
    • Interbank GIRO (IBG)

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm,    9am – 1pm(Sat) * Order cut-off time is 12pm

  • Tel: (60) 3 7890 6399
Inquiry
Mobile View

Copyright © MISUMI Corporation All Rights Reserved.